Scribd
Upload
14K views2 pages

Stiffness Calculation For Pile

This document calculates the static stiffness of a pile with a 900 mm diameter and 20 m length, made of material with a modulus of elasticity of 29580 kN/m2. It first calculates properties of the pile like its area and moment of inertia. It then calculates the pile's allowable load capacity and vertical stiffness as 94089.91 T/m, increased to 108203.402 T/m accounting for soil resistance. The horizontal stiffness is calculated considering the pile fixed at a depth of 9.4073159 m, yielding a value of 1373.16 T/m.

Uploaded by

Priyabrata Mahata
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
14K views2 pages

Stiffness Calculation For Pile

This document calculates the static stiffness of a pile with a 900 mm diameter and 20 m length, made of material with a modulus of elasticity of 29580 kN/m2. It first calculates properties of the pile like its area and moment of inertia. It then calculates the pile's allowable load capacity and vertical stiffness as 94089.91 T/m, increased to 108203.402 T/m accounting for soil resistance. The horizontal stiffness is calculated considering the pile fixed at a depth of 9.4073159 m, yielding a value of 1373.16 T/m.

Uploaded by

Priyabrata Mahata
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Static Stiffness Calculation of Pile :

Dia. Of Pile ( D ) =
Area of Pile (A) =
Length of Pile ( L )=
Modulus of elsticity (E) =
Moment of Inertia (I) =

900
0.636
20
29580
0.0322

mm
m2
m
N/mm2 =
m4

29580000 kN/m2

Allowable Pile Load

Pile Dia.
(mm)

Compression (T)
2500

900

Shear (T)
125

Tension (T)
350

Vertical Stiffness :
KFY =
Load for unit deflection in vertical direction
=
A.E/L
=
94089.91 T/m
Note : The value is increased by 15% considering frictional resistance from surrounding soil.
Hence,

KFY,mod =

108203.402 T/m

Horz. Stiffness :
[Ref. IS: 2911(Part1/Sec2)-1979; Amendment No.3 (Aug 1987) Appendix C]
From Fig.2 For , L1 =
0
m
Lf /T =
2.15
(for fixed head pile in sand & normally loaded clay)
K1

=
Hence ,

0.525

kg/cm3 ( for medium Sand) From Table : 1

5250

kN/m3

T 5

EI
=
K1

2.830

Lf
1

Therefore, Depth of Fixity (Lf) =

6.08

Point of
Fixity

For clay

(Cu )

K2

kg/cm2

0.2
7.75

775

KN/m2

kg/cm

[Assumed]
[As per Table-2]

Hence,

R4

EI
K2

5.921

Therefore, Depth of Fixity (Lf) =

12.73

Consider Depth of Fixity = Avg. of two above L f =


KFX

= KFZ

=
=

m
9.4073159 m

12 EI/ (L 1+Lf) 3
13731.63 kN/m

Therefore stiffnesses for 900 mm diameter piles are as follows:


Vertical = 108203.402 T/m
Horizontal = 1373.16 T/m

You might also like