Scribd
Upload
143 views3 pages

Probe Output Power Calculator, Current Version

This document provides information and calculators for four magnetic and electric field probes from Beehive Electronics. It contains instructions and examples for calculating output power from a known field strength or flux density and for calculating the field strength or flux density based on a measured output power. The calculators can be used for the 100A and 100B magnetic field probes, the 100C magnetic field probe, and the 100D electric field probe. The user enters frequency, field strength, flux density or output power values and the calculators provide results for power, voltage, or field strength.

Uploaded by

Ashraf Cardiff
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
143 views3 pages

Probe Output Power Calculator, Current Version

This document provides information and calculators for four magnetic and electric field probes from Beehive Electronics. It contains instructions and examples for calculating output power from a known field strength or flux density and for calculating the field strength or flux density based on a measured output power. The calculators can be used for the 100A and 100B magnetic field probes, the 100C magnetic field probe, and the 100D electric field probe. The user enters frequency, field strength, flux density or output power values and the calculators provide results for power, voltage, or field strength.

Uploaded by

Ashraf Cardiff
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 3

Beehive Electronics

V1.1 4/28/2010

100 series probe output power calculator

100A magnetic field probe

100B magnetic field probe

Calculate output power from known flux density:

Calculate output power from known flux density:

Input the following two parameters:

Input the following two parameters:

Frequency (MHz)
Flux density (T)

10
1.00E-06

Frequency (MHz)
Flux density (T)

Resulting output:

Resulting output:

Power into 50 ohms (dBm)


Power into 50 ohms (mW)
Voltage into 50 ohms

-34.80 dBm
3.311E-04 mW
4.069E-03 V

Power into 50 ohms (dBm)


Power into 50 ohms (mW)
Voltage into 50 ohms

Calculate flux density from measured output power:

Calculate flux density from measured output power:

Input the following two parameters:

Input the following two parameters:

Frequency (MHz)
Output power (dBm)

10
-50

Frequency (MHz)
Output power (dBm)

Resulting output:

Resulting output:

Flux density, dB
Field strength, linear

-135.2 dB tesla
1.7378E-007 tesla

Flux density, dB
Field strength, linear

Enter your input data into the gray cells


The results are displayed in the light yellow cells

Examples of how to use the spreadsheet:


Example 1: Calculate flux density from measured output power.
Probe:
100A
Frequency 10 MHz
Enter '10' in cell E27
Power:
-50 dBm Enter '-50' in cell E28
Result:

dB:
Linear:

-135.2 dB tesla
1.74e-7 tesla

in cell E32
in cell E33

Example 2: Calculate probe output power


Probe:
Frequency:
Flux density:
Result:

om known flux density:

1000
1.00E-06

100C magnetic field probe

100D electric field probe

Calculate output power from known flux density:

Calculate output power from known f

Input the following two parameters:

Input the following two parameters:

Frequency (MHz)
Flux density (T)

10
1.00E-06

Resulting output:
-17.80 dBm
1.660E-02 mW
2.881E-02 V

m measured output power:

10
-57.8

Power into 50 ohms (dBm)


Power into 50 ohms (mW)
Voltage into 50 ohms

Resulting output:
-14.90 dBm
3.236E-02 mW
4.022E-02 V

Calculate field strength from measur

Input the following two parameters:

Input the following two parameters:


10
-14.9

Resulting output:
Flux density, dB
Field strength, linear

le 2: Calculate probe output power for a known flux density


100B
Frequency:
1000 MHz
Enter '1000' in cell L10
Flux density:
1e-6 tesla
Enter '1e-6' in cell L11
Power

Power into 50 ohms (dBm


Power into 50 ohms (mW
Voltage into 50 ohms

Calculate flux density from measured output power:

Frequency (MHz)
Output power (dBm)

-120 dB tesla
0.000001 tesla

Frequency (MHz)
Field strength (V/m)

-17.8 dBm in cell L16

Frequency (MHz)
Output power (dBm)
Resulting output:

-120 dB tesla
0.000001 tesla

Field strength, dB
Field strength, linear

ectric field probe

output power from known field strength:

ollowing two parameters:


Frequency (MHz)
Field strength (V/m)

Power into 50 ohms (dBm)


Power into 50 ohms (mW)
Voltage into 50 ohms

0.01
10

-133.20 dBm
4.786E-14 mW
4.892E-08 V

field strength from measured output power:

ollowing two parameters:


Frequency (MHz)
Output power (dBm)

Field strength, dB
Field strength, linear

0.01
-133.2

20 dB V/m
10 V/m

You might also like