Scribd
Upload
300 views1 page

Advanced Well Completion Solutions

The Formation Isolation Valve is used in formations sensitive to fluid loss, deepwater completions, and high-temperature, high-pressure environments up to 300°F and 5000 psi. It isolates the formation from the wellbore and allows tools to be run in and out without affecting isolation. The valve opens with multiple applications of tubing pressure to simplify operations and enhances safety. It is a full-opening mechanical ball valve made of materials resistant to sulfide stress cracking.

Uploaded by

Pak Rio
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
300 views1 page

Advanced Well Completion Solutions

The Formation Isolation Valve is used in formations sensitive to fluid loss, deepwater completions, and high-temperature, high-pressure environments up to 300°F and 5000 psi. It isolates the formation from the wellbore and allows tools to be run in and out without affecting isolation. The valve opens with multiple applications of tubing pressure to simplify operations and enhances safety. It is a full-opening mechanical ball valve made of materials resistant to sulfide stress cracking.

Uploaded by

Pak Rio
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Formation Isolation Valve

Applications

Formations sensitive to fluid loss


Deepwater completions
High-temperature, high-pressure
environments
300F and 5000 psi
[149C and 345 bar]

Benefits and features

Multiple opening and closing cycles


simplify completion operations
and enhance wellbore safety.
Opens without debris to protect
wellbore productivity

The Schlumberger FIV* Formation


Isolation Valve is a large-bore completion valve normally run below a permanent or retrievable completion
production packer. The tool acts as a
downhole lubricator valve, allowing
long strings of well service equipment,
such as perforating guns, to be run
into and retrieved from the well while
the formation is completely isolated.
The FIV valve can be placed below the
gravel-pack packer in the sand face
completion.
This versatile completion valve
helps minimize the use of fluid loss
control treatments. It can be used to

suspend or temporarily abandon a


well. The FIV valve has a high pressure rating, compared to flapper fluid
loss tools, and it can be opened with
tubing pressure, eliminating a trip
into the well.
The FIV valve is a full opening
mechanical ball valve. The sealing
ball design is a larger version of the
field-proven Schlumberger HTHP DST
ball valve with a gas-tight seal. The
main purpose of the valve is to isolate
the formation from the wellbore. The
ball is closed when the shifting tool on
the washpipe is pulled through it.
It can be opened with multiple (10)
applications of tubing pressure, facilitating completion operations. Packers
can be set, tubing-tested, etc., without
affecting formation isolation. The FIV
valve holds pressure from both above
and below the valve making it ideal for
use in critical applications such as
deep water, HTHP and when the formation is sensitive to fluid loss.
The valve is manufactured from
materials that comply with NACE
standard MR0175 for sulfide stress
cracking resistant metallic materials.

Formation Isolation Valve Specifications


Casing Size (in. [mm])

Weight (lbm/ft [kg/m])

OD (in. [mm])

ID (in. [mm])

7 [177.8]
958 [244.5]

26 [38.7]
53.5 [79.6]

5.810 [147.6]
8.180 [207.8]

3.100 [78.7]
4.560 [115.8]

QUANTUM Sand Control Accessories

43

You might also like