Scribd
Upload
195 views

Weep Hole Part Elevation Section: Drawn: Checked: Approved: Date: CAW 5/9/2011

This document provides specifications and details for reinforced concrete retaining walls. It includes quantities of materials needed per linear foot of wall for different wall heights. Reinforcing steel sizes and spacing are specified. It also provides dimensions and details for features like expansion joints, control joints, wall corners, and entrances. The document was originally issued and sealed by Thomas S. Shafer, an engineer in Nebraska.

Uploaded by

Peter Jean-jacques
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
195 views

Weep Hole Part Elevation Section: Drawn: Checked: Approved: Date: CAW 5/9/2011

This document provides specifications and details for reinforced concrete retaining walls. It includes quantities of materials needed per linear foot of wall for different wall heights. Reinforcing steel sizes and spacing are specified. It also provides dimensions and details for features like expansion joints, control joints, wall corners, and entrances. The document was originally issued and sealed by Thomas S. Shafer, an engineer in Nebraska.

Uploaded by

Peter Jean-jacques
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SHEET NO.

700028 OLD AS OF 070610.cfg

...\tables\Pen\BW_PENTABLE.TBL

siecaw

10/3/2011

...\STANDARD\Current\lsp610.dgn

PROJ:

PEN:

USER:

DATE:

DGN:

LSP 610
QUANTITIES PER LINEAR FOOT OF WALL

5/9/2011

Drawn:

CAW

LSP 610

PROJECT NO.
Date:

Checked:

REINFORCING
STEEL
POUNDS

HEIGHT
OF WALL
FEET

CONCRETE
CUBIC
YARDS

UNDER 35"

.305

11.7

35" - 47"

.355

14.9

ADDITIONAL CONCRETE

DAMPPROOFING
SQUARE
YARDS

ONE WALL
CORNER
CUBIC YARDS

ONE ENTRANCE
CORNER
CUBIC YARDS

.572

1.1

.669

1.5

Approved:

ADDITIONAL STEEL
ONE WALL
CORNER
POUNDS

ONE ENTRANCE
CORNER
POUNDS

0.14

93

27

0.15

121

35

SURCHARGED FILL BEHIND WALL (MAXIMUM SURCHARGE SLOPE 11:7)


DIMENSIONS

HEIGHT
OF WALL

REINFORCING BARS
TRANSVERSE BARS, BASE

SHORT VERTICAL
FULL HEIGHT
BARS (ALTERNATE
VERTICAL BARS
WITH FULL
(ALTERNATE WITH
HEIGHT BARS)
SHORT BARS)

LONGITUDINAL BARS, BASE (NO 4)

TOE BARS

HEEL BARS

NUMBER OF
TOE BARS

NUMBER OF
HEEL BARS

UNDER 35"

10"

1-0"

1-6"

1-2"

3-4"

1-0"

3-9"

NO 3 @ 14"

NO 3 @ 14"

NO 3 @ 12"

NO 3 @ 12"

35" - 47"

1-0"

1-0"

1-10"

1-6"

3-10"

1-0"

3-10"

NO 4 @ 16"

NO 4 @ 16"

NO 3 @ 12"

NO 3 @ 12"

MAX.
11

NOTE:

8"

ALL EXPOSED EDGES OF CONCRETE SHALL BE CHAMFERED 3/4"

NOTE:
MINIMUM COVERING,
BE 3".

WEEP HOLE SHALL BE


PLACED IN ALL
RETAINING WALLS

EXPANSION JOINTS SHALL BE PLACED IN WALLS AT NOT MORE THAN 50-0" INTERVALS, AT LOCATIONS TO BE
DETERMINED BY THE ENGINEER, AND AT 8-0" FROM ALL WALL AND ENTRANCE CORNERS. LONGITUDINAL BARS
SHALL BE CUT AT EXPANSION JOINTS.
2" PIPE @
10-0" CENTERS

FULL HEIGHT
VERTICAL BARS

DUMMY JOINTS SHALL BE PLACED IN THE FACE OF WALLS AT LOCATIONS TO BE DETERMINED BY THE ENGINEER.
1 CUBIC FOOT
OF COURSE
GRAVEL
ENCASED
WITH FILTER
FABRIC

SIDEWALK

SIDEWALK

THE BACK FACE OF ALL RETAINING WALLS OVER TWO FEET HIGH SHALL BE DAMP-PROOFED ABOVE THE TOP OF THE
FOOTING.

CONSTRUCTION
JOINT

WEEP HOLES SHALL BE PLACED AT 10-0" CENTERS IN ALL RETAINING WALLS.


G

TRANSVERSE
HEEL BARS

ALL EXPOSED FACES OF RETAINING WALLS SHALL BE BUILT WITH FORMS TO SIMULATE A BRICK FACE.
F

NO 4 LONGITUDINAL
BARS, BASE
(TOE & HEEL)

9"

3-0" MINIMUM

SHORT VERTICAL BARS


A

A CONTROL JOINT SHALL BE PLACED MIDWAY BETWEEN EXPANSION JOINTS OR MIDWAY BETWEEN EXPANSION JOINT
AND THE END OF THE RETAINING WALL, EXCEPT CONTROL JOINTS MAY BE DELETED WHERE THE DISTANCE BETWEEN
EXPANSION JOINTS OR THE DISTANCE BETWEEN EXPANSION JOINT AND END OF RETAINING WALL IS 30-0" OR
LESS. FIELD CUT ALTERNATE LONGITUDINAL BARS AT CONTROL JOINTS. TOP LONGITUDINAL BARS TO BE
CONTINUOUS THROUGH CONTROL JOINT.

1-0"

TRANSVERSE
TOE BARS

ALL REINFORCING STEEL SHALL BE EPOXY COATED.


ALL CONCRETE SHALL BE L3500.

D
1 1/4"

SECTION AT

WEEP HOLE

PART ELEVATION

SECTION

NO SCALE

1" PREFORMED
EXPANSION
JOINT FILLER

NOTE:

8"

RETAINING WALL AND


WALL FOR STEPS TO BE
POURED INTEGRALLY

END OF WALL

NO 4 HORIZONTAL
BARS @ 12" FULL
HEIGHT OF WALL

END OF WALL

4 1/2"

FRONT FACE

VI
AL CI
L
EN
ON
SI
S

THOMAS S.
SHAFER
E-10679

2-0"
WALL FOR STEPS NOT
INCLUDED IN THE PLAN

QUANTITIES
DETAIL OF

CONTROL JOINT

6" CENTER BULB


TYPE RUBBER
WATER STOP

3"

1" PREFORMED
JOINT FILLER
EXPANSION

NO 4 HORIZONTAL
BARS @ 12" ABOVE
SIDEWALK LEVEL

DETAIL OF

DUMMY JOINT

DETAIL OF

LSP 610

WALL CORNER

ENTRANCE CORNER

NO SCALE

NO SCALE

DETAIL OF

TA
TE

NO 4 VERTICAL BARS
PLACED AS SHOWN

2-0"

DETAIL OF

NO SCALE

JOINTS.

QUANTITIES

1 1/4"

1 1/4"

BACK FACE

R
EE
N
I
G

2-0"

NOTE:
WATER STOP TO EXTEND FROM TOP
OF FOOTING TO 3" BELOW TOP OF
WALL ALL LONGITUDINAL STEEL IN
WALL SHALL BE CUT AT EXPANSION

2-0"

8-0"

8-0"

NO 4 VERTICAL BARS
PLACED AS SHOWN

1/4"

3/4"

NO SCALE

PR
OF
E

WALL SECTION

8"

3/4"

FILL WITH
APPROVED
JOINT SEALER

CENTER OF
EXPANSION JOINT

3/4"

CENTER OF
EXPANSION JOINT
QUANTITIES

END OF WALL

1/4"

EXPANSION JOINT

A
SK
OF NEBRA

NO SCALE

EFFECTIVE JULY 1, 2011


REINFORCED CONCRETE RETAINING WALL TYPE A AND B
L.S.P. 610

This document was originally issued and sealed by Thomas S. Shafer, E-10679, on 3-1-10. This media should not be considered a certified document.

NO 4 BARS @ 12"

1" PREFORMED
EXPANSION
JOINT FILLER

MEASURED FROM FACE OF THE CONCRETE TO THE SURFACE OF ANY REINFORCING BARS SHALL

You might also like