Scribd
Upload
45 views

PASPort Force Sensor

PASPort Force Sensor Manual

Uploaded by

Science House
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
45 views

PASPort Force Sensor

PASPort Force Sensor Manual

Uploaded by

Science House
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

I n s tr u c t i o n S he e t

012-07297E

Force Sensor
PS-2104

Introduction
2

3
4

The Force Sensor connects to a PASPORT interface or datalogger


and records force in the range of 50 N to +50 N at a rate of up to
1000 samples per second.

Set-up
Connecting the Sensor to an Interface

1.

Connect the sensors plug to any port of a PASPORT interface or datalogger.

2.

If you are using a computer, connect the PASPORT interface


to it and start DataStudio.

Included Parts
1. Force Sensor

Zeroing the Sensor

2. Bumper attachment

Press the ZERO button on the sensor. The sensors output is


adjusted to read zero.

3. Hook attachment
4. Cart/Bracket thumbscrew (M5 45 mm)
5. Rod clamp thumbscrew (1/4-20 0.75 inch)

Connecting Bumper and Hook Attachments


Screw the bumper or hook into the sensor as illustrated.

Additional Part Required

PASPORT interface or datalogger

Quick Start
1.

Connect the Force Sensor to your PASPORT interface.

2.

If you are using a computer, connect the PASPORT interface


to it and start DataStudio.

3.

Screw the hook attachment into the sensor.

4.

Press or click the start button to begin recording data.

Sample Rate

5.

Push or pull the hook. The sensor measures the applied


force.

By default, the sensor collects 10 samples per second. It can collect data as fast as 1000 samples per second and as slow as one
sample every four hours. Change the sample rate in DataStudio
or on your datalogger.

About the Force Measurement

Fo r c e S e n s o r

Inverted Output
By default, the sensor registers pushing as a positive force and
pulling as a negative force. To register pulling as positive and
pushing as negative, select the Force (Inverted) measurement in
DataStudio or on your datalogger.

PS- 2 1 0 4

Specifications
Range

50 N

Resolution

0.03 N

Maximum Sample Rate

1000 samples/s

Sensor Mounting
Mounting the Sensor on a Rod
Slide the sensor onto a rod and secure it with the thumbscrew as
illustrated.

Technical Support
For assistance with any PASCO product, contact PASCO at:
Address: PASCO scientific
10101 Foothills Blvd.
Roseville, CA 95747-7100
Phone:

916-786-3800 (worldwide)
800-772-8700 (U.S.)

Fax:

916-786-7565

Web:

www.pasco.com

Email:

[email protected]

For more information about the Force Sensor and the most
up-to-date version of this Instruction Sheet, visit:
www.pasco.com/go?PS-2104

Mounting the Sensor on a PASCO Cart


1.

Insert the included Cart/Bracket thumbscrew through the


hole in the senor labeled Cart.

2.

Screw the thumbscrew into the threaded hole on the top of


the cart.

Mounting the Sensor on an IDS Bracket


1.

Insert the included Cart/Bracket thumbscrew through the


hole in the IDS Force Accessory Bracket (PASCO part
CI-6545).

2.

Screw the thumbscrew into the hole in the sensor labeled


IDS Bracket.

Limited Warranty For a description of the product warranty, see the


PASCO catalog.
Copyright The PASCO scientific 012-07297E Force Sensor Instruction
Sheet is copyrighted with all rights reserved. Permission is granted to
non-profit educational institutions for reproduction of any part of this manual, providing the reproductions are used only in their laboratories and
classrooms, and are not sold for profit. Reproduction under any other circumstances, without the written consent of PASCO scientific, is prohibited.
Trademarks PASCO, PASCO scientific, and PASPORT are trademarks
or registered trademarks of PASCO scientific, in the United States and/or
in other countries. All other brands, products, or service names are or may
be trademarks or service marks of, and are used to identify, products or
services of, their respective owners. For more information visit
www.pasco.com/legal.

You might also like