Scribd
Upload
102 views1 page

CXLLN Specification STM-4

The document specifies parameters for the optical interfaces of the CXLLN network when using an STM-4 optical module including: a nominal bit rate of 155.52 Mb/s, line code pattern of NRZ, application code of STM-4, transmission distance up to 40 km, operating wavelength range of 1260-1360 nm, using single mode fiber, mean launched optical power between -7 to +3 dBm, receiver sensitivity of -28 dBm, minimum overload of -8 dBm, and additional technical specifications for wavelength and signal quality.

Uploaded by

Mustafa Hasan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
102 views1 page

CXLLN Specification STM-4

The document specifies parameters for the optical interfaces of the CXLLN network when using an STM-4 optical module including: a nominal bit rate of 155.52 Mb/s, line code pattern of NRZ, application code of STM-4, transmission distance up to 40 km, operating wavelength range of 1260-1360 nm, using single mode fiber, mean launched optical power between -7 to +3 dBm, receiver sensitivity of -28 dBm, minimum overload of -8 dBm, and additional technical specifications for wavelength and signal quality.

Uploaded by

Mustafa Hasan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Table 2 Parameters specified for the optical interfaces of the CXLLN when the STM-4 optical module is use

Parameter
Nominal bit rate
Line code pattern
Application code
Transmission distance (km)
Operating wavelength range (nm)
Type of fiber
Mean launched optical power (dBm)
Receiver sensitivity (dBm)
Minimum overload (dBm)
Minimum extinction ratio (dB)
Maximum -20 dB spectral width (nm)
Minimum side mode suppression ratio (dB)

You might also like