Scribd
Upload
779 views1 page

Gas Lift Valve FRC-GLV Pulling Tool

The FRC-GLV Pulling Tool is used to recover gas lift valves during change-out operations. It engages the full 360 degree underside of the fish neck for greater load bearing and reduced damage compared to standard 2-3 prong tools. The full contact distributes force evenly while improving impact transmission to increase successful recovery chances. Its positive locking key and expansion profiles ensure clean disengagement during jarring without relying on springs. It is suitable for conventional and heavy jarring applications in retrieving gas lift valves.

Uploaded by

Deans BoogElzz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
779 views1 page

Gas Lift Valve FRC-GLV Pulling Tool

The FRC-GLV Pulling Tool is used to recover gas lift valves during change-out operations. It engages the full 360 degree underside of the fish neck for greater load bearing and reduced damage compared to standard 2-3 prong tools. The full contact distributes force evenly while improving impact transmission to increase successful recovery chances. Its positive locking key and expansion profiles ensure clean disengagement during jarring without relying on springs. It is suitable for conventional and heavy jarring applications in retrieving gas lift valves.

Uploaded by

Deans BoogElzz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

FRC-GLV Pulling Tool

Peaks Full Radial Contact Gas Lift Valve (FRC-GLV)


Pulling Tool is used in conjunction with a kickover
tool for recovering gas lift valves (GLV) during GLV
change-out operations.
The FRC-GLV Pulling Tool is designed to engage the full 360 degree
underside of an external fish neck and is generally used in conventional
and heavy jarring applications. The full contact area provides a much
greater load bearing area compared to standard 2 or 3 dog type pulling
tools which are commonly used in gas-lift valve changeout operations.
The full supporting latch finger face reduces the amount of damage to
both the latch fingers and the fish neck to be recovered by evenly
distributing the load whilst also improving impact transmission, greatly
increasing chances for successful recovery.
Incorporating a positive locking key feature & expansion profiles on the
Core & Latch Fingers, ensures clean disengagement from the GLV
during downward jarring. The FRC-GLV Pulling Tool does not rely upon
springs and steel memory for disengagement which also makes repinning safe & easy.
Applications
Retrieval of gas lift valves in conventional or heavy jarring
applications
Features & Benefits

Cores available to suit top & bottom latch GLVs


Suits all standard SPM pockets & GLV latches
Full 360 degree (Full Radial Contact) Latch Finger coverage
Jar down to release - positive locking Core & Latch Finger
expansion profile feature to assist in safe tool disengagement
Simple & safe to redress - no special pinning tools required
Additional Cores available to suit special reach requirements
Robust design

All Standard Industry


Connections Available

Technical Information
Nominal
Size

Actual OD

To Engage

1 1/2

1.350

0.875 (1GLV)

1.187

1 3/4

1.750

1.187 (11/2 GLV)

1.187

1 3/4

1.750

1.187 (11/2 GLV)

1.375

FRC-GLV Pulling Tool


Product Code: 206

[email protected]
www.peakwellsystems.com

Fish Neck

You might also like