m
n
i ON; 54
"| A~GTD-O-FDAA
ELECTRICAL ENGINEERING
Paper—I
(Conventional)
Time Allowed : Three Hours Maximum Marks : 202
INSTRUCTIONS
Please read each of the following instructions carefully
before attempting questions :
Candidates should attempt FIVE questions in all.
Awestion No. 1 is compulsory.
Ou ‘Of the remaining SIX questions attempt any FOUR
questions. :
The number of marks carried by a part/question is indicated
against it.
Answers must be written in ENGLISH only.
Unless otherwise mentioned, symbols and notations have
their usual standard meanings,
Assume suitable data, if necessary, and indicate the same
clearly.
Neat sketches may be drawn, wherever required.
All parts and sub-parts of a question are to be attempted
together in the answer book.
Aitempts of questions shall be counted in chronological order.
Unless struck off, attempt of a question shall be counted
even if attempted partly.
Any page or portion of the page left blank in the answer
book must be clearly struck off. 1,
(a) Determine the Thevenin Resistance for the ci-cuit
shown in Fig. I(a). 10
I tA}
a
41
90 18Q
©
Fig. 1(a)
(b) Determine current I through the 10 Q resistances
shown in Fig. 1(b) below : 10
102 3A I
+
51) 102 10a
Fig. 1()
(c) A PMMC instrument has
ened, what would
be c(t) and the associatzd t:me constant ?
(iii) In which of the above two czses, the response
would be faster ? 10
3 (Contd.:
ee (g)
R(s)
|
For the feedback control system shown below,
s+] Cis)
(a)
(@)
(b)
Fig. 1(g)
determine the sensitivity of closed loop transfer
function with variation in parameter ‘K’ at
w = 1.5 rad/sec. Assume, the normal process
parameter value of K is 1. 10
List at least two essential properties of each material
that are necessary for construction of medium rating
power transformer. 10
Two mutually coupled identical coils are connected
in series having self inductance L = 4 mH and
mutual inductance M = 2 mH, what is the
maximum ratio ‘of two possible values of effective
inductances ?
Determine the coefficient of coupling between the
two coils. 10
The following readings were observed when
measuring a voltage.
S.No.| 1 2 3 4 s 6 7 8
| Volts 532 | 548 | 543 | 535 | 546 | 531 | 543 | 536
4 (Contd.) ()
(a)
(b)
(c)
Calculate :
(i) Average deviation
(ii) Standard deviation
(iii) Probable error of on> reading. 10
Determine the E field using Gauss’s law caused
by a spherical cloud of e'ectron with a volume
charge density
PG 9, )=P.>; O 0) and
«= 3 e,< 0), then find the expressions for
D, and E, in medium | and D, in medium 2 with
known electric field in medium 2 is E, = 101, + 203,
10
‘A two port network follows the following voltage-
current relations :
1, = 2v, -V,
21, =e 2V, + 4V,
Determine z-parameters of the network and its
T-equivalent circuit. 10
The field of a dc servomotor is separately excited
by means of a de amplifier of gain Ky = 90. A
voltage proportional to field current is now fedback
negatively to the amplifier input as indicated in
following figure. Determine the value of K so that
field time constant is reduced to 4 millisecond.
| L=2H 10
So
& kK, KR
: s0a=R ge
\ -e + (50 ohms)
Po
Fig. 4(b)
6 (Contd.) (c) Explain the behavior of ferromagnetic materials
above and below the Curie temperature. to
(a) Show that the voltage V across R shown in
Fig. 5(a) is incependent of R. at radian frequency
w of voltage source when wL C= WLC, =1
Find also the expression of this voltage. 1¢
L, L,
OOO TH
R
=o, /
Fig. 5(a)
(b) A unity feedback control system is characterisec
by openloop transfer function
K(s+13) .
s(s+3)(s+7)
Using Routh’s criteria, determir the vale of gain
“K’ for which system will be limitedly stable ?
Also, determine the closed loop poles for this value
of ‘K’, 10
G(s) =
(c) What is the term o/we called ia the study of EM
waves ? Find general expression of attenuation
constant o and relate with skin depth 3. Prove that
the skin depth 5 is independent of frequency when
o/@€ << 1 (poor conductor) and decreeses with
frequency when G/we >> 1 (gcod conductor).
10
7 (Contd.) (a) Find all the four canonical forms of the impedance
2(s) = s + 1. State if you observe some specia_ity
in these realisations. 10
K(s? +6s +10)
s?+2s+10
H(s) = 1. Obtain K = 0, K = » points in root-loci
Show that the root-loci are arcs of a circle centred
at origin with radius equal to V10. to
(b) The system is described by G(s) =
(c) How the four quantities E, D, H and B are related
to each other in static and time varying fields ?
Name the relation as laws. Give the value of
divergence and curl of each quantity. 10
(a) Determine overall z-parameters when two identical
2-port networks with 2, = 2) = 2) = 2) = 20
are connected in cascade. 19
(b) The block diagram of the system is shown ia
Fig. 7(b) given below :
RG) Kea) 10 | Cs)
—> (s+ 2) > 4 ——
s (s+3)
Fig. 7(b)
Obtain the phase crossover frequency. 10
(c) What is the difference between the coaxial cable
used for power line and the one used in an
electronic circuit ? Derive an expression of
capacitance for such a cable per unit length. 10
8
ae 
