Scribd
Upload
4K views1 page

ASTM A192, ASME SA192 American Standard

This document discusses ASTM A192 and ASME SA192 standards for seamless carbon steel boiler pipe used in high pressure applications. It specifies that the standards apply to seamless carbon steel pipe for boilers and superheaters with minimum wall thicknesses. The pipe must meet minimum requirements for tensile strength of 325 MPa, elongation of 35%, and yield strength of 180 MPa. Chemical composition limits are provided for carbon as well as other elements like silicon, manganese, phosphorus, and sulfur.

Uploaded by

Xamir Suarez Alejandro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4K views1 page

ASTM A192, ASME SA192 American Standard

This document discusses ASTM A192 and ASME SA192 standards for seamless carbon steel boiler pipe used in high pressure applications. It specifies that the standards apply to seamless carbon steel pipe for boilers and superheaters with minimum wall thicknesses. The pipe must meet minimum requirements for tensile strength of 325 MPa, elongation of 35%, and yield strength of 180 MPa. Chemical composition limits are provided for carbon as well as other elements like silicon, manganese, phosphorus, and sulfur.

Uploaded by

Xamir Suarez Alejandro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ASTM A192 and ASME SA192 American Standard (Seamless Carbon Steel

Boiler Pipe for High Pressure Service)


Standard:
ASTM A192/A192M/ASME SA192/SA-192M
Application:
It is applied to steel pipe of seamless carbon steel boiler and superheater with the
minimum wall thickness under high pressure.
Grades of Main Steel Pipe:
Mechanical Properties
Standard

Grade

ASTM A192/ASME SA192

A192/SA192

Tensile Strength
(MPa)
325

Elongation
(%)
35

Yield Strength (MPa)


180

Che mical Composition


Standard
ASTM A192/ASME
SA192

Grade

Chemical Composition Limits, %


Si
Mn
P
S
Cr Mo Cu Ni V

A192 / SA192 0.060.18 0.25 0.270.63 0.035 0.035 ?

/ /

Remarks
HR: hot rolled
A: annealed

CW: cold worked


N: normalized

SR: stress relieved


HF

You might also like