Scribd
Upload
61 views5 pages

Beam Calculation TP II

This document contains calculations for the stress and deflection analysis of two beam structures. The first beam is 4x70x30 cm and 6m long carrying a load of 8.71 tons. The stress and deflection were calculated and found to be within allowable limits. The second beam is 110x75 cm and 12m long carrying a load of 9.42 tons. Again, the stress and deflection were calculated and found to be within allowable limits. Rebar requirements were also calculated for anchor piles supporting a total load of 800 tons.

Uploaded by

Nurfandy Dewanto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
61 views5 pages

Beam Calculation TP II

This document contains calculations for the stress and deflection analysis of two beam structures. The first beam is 4x70x30 cm and 6m long carrying a load of 8.71 tons. The stress and deflection were calculated and found to be within allowable limits. The second beam is 110x75 cm and 12m long carrying a load of 9.42 tons. Again, the stress and deflection were calculated and found to be within allowable limits. Rebar requirements were also calculated for anchor piles supporting a total load of 800 tons.

Uploaded by

Nurfandy Dewanto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 5

TEST BEAM CALCULATION

Beam 4x70x30 cm
L=

6.0 m

weight =

8.71 Ton
2.5

P=

750,000 kg

Case -2

65

70

400

=
=
=
=
=
=
=

BJ 37
1,800.0 kg/cm2
462.5 cm2
1,988,437.5 kg cm4
75,000,000.0 kg.cm
56,812.5 cm3
1,320.1 kg/cm2
x< Allowable --> Ok

=
=

0.2 cm
1.1 cm
x< Allowable --> Ok

65

70

2.5
2.5

Stress Analysis :
Beam Type
Allowable
Area
Ix
Mx
Wx
x

2.5
1.25

1.25

30

30

Deflection Analysis :
x ( PL/48EI)
allowable
( 1/360 L )

CROSS BEAM CALCULATION

Beam 110X75
L=

12.00 m weight

9.42 Ton
5.0

P=

500

55
110

100

5.0
2.5

75

375,000 kg

Stress Analysis :
Beam Type
Allowable

=
=

BJ 37
2400 kg/cm2

Area
Ix
Mx
Wx
x

=
=
=
=
=

1,000.00 cm2
2,277,083 kg cm4
46,875,000 kg.cm
41,401.52 cm3
1,132.20 kg/cm2
x< Allowable --> Ok

=
=

0.20 cm
1.39 cm
x< Allowable --> Ok

Deflection Analysis :
x ( PL/48EI)
allowable
( 1/360 L )

67200000
23200000

Rebar Calculation

Load Design

Amout of Anchor Pile

Load For 1 Anchor Pile

800.00 Ton
4.00
200.00 Ton

=
Rebar Type

Ultimit of Rebar

Welding Reduction factor

Ultimit Final

2,040.00 kg/cm2

Rebar

3.20 cm

Surface Area of Rebar

8.04 cm2

Load capacity of 1 rebar

Rebar required

BJ 34
3,400.00 kg/cm2
40%

16,398.34 kg

16.40 Ton

12.20 Pcs ~

16.00

32 mm

64

You might also like