Scribd
Upload
1K views1 page

PP - H30SG

Repol H030SG is a polypropylene homopolymer produced by Reliance Polymers in India. It is recommended for applications such as woven fabrics, sacks, and monofilaments used in industrial packaging and geotextiles. The polymer combines good processability with excellent mechanical properties such as a tensile strength of 34 MPa and elongation at yield of 10%. It also has a heat deflection temperature of 104°C and meets various regulatory standards for food contact. The polymer should be stored in dry conditions below 50°C and protected from UV light.

Uploaded by

Cường Nguyễn
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views1 page

PP - H30SG

Repol H030SG is a polypropylene homopolymer produced by Reliance Polymers in India. It is recommended for applications such as woven fabrics, sacks, and monofilaments used in industrial packaging and geotextiles. The polymer combines good processability with excellent mechanical properties such as a tensile strength of 34 MPa and elongation at yield of 10%. It also has a heat deflection temperature of 104°C and meets various regulatory standards for food contact. The polymer should be stored in dry conditions below 50°C and protected from UV light.

Uploaded by

Cường Nguyễn
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

POLYPROPYLENE HOMOPOLYMER

H030SG
Producer:

Reliance Polymers / India

Description:

Woven fabrics, sacks and monofilaments


Repol H030SG is recommended for raffia tapes used in making woven fabrics for sacking,
carpet backing, industrial packaging and geotextile applications. Repol H030SG combines
good processability on water bath and chill-roll with excellent mechanical properties.
Formulated for low water carry-over.

Applications:

Woven fabrics, sacks&monofilaments


PROPERTY

TEST METHOD

UNIT

TYPICAL VALUES*

MFR @ 230oC , 2.16 Kg

ASTM D 1238

g/10min

3.4

Tensile Strength at Yield (50mm/min)

ASTM D 638

Mpa

34

Elongation at Yield (50mm/min)

ASTM D 638

10

ASTM D 790A

Mpa

1650

Flexural Modulus (1% secant)


Notched Izod Impact Strength at 23C

ASTM D 256
ASTM D 648

J/m
40
o
C
Heat Deflection Temperature (455 kPa)
104
* Typical values, not to be taken as specification. All the mechanical properties as per ASTM D 638. Type I

specimen injection moulded in accordance with ASTM D 4101.

Regulatory
information:

Meets the requirements stipulated in IS 10910 on "Specification for Polypropylene and its
Copolymers for safe use in contact with foodstuff, pfarceuticals, and drinking water".
Additives incorporated in this grade conform to the positive list of constituents as prescribed
in IS 10909. The grade and the additives incorporated in it also cmply with the FDA:CFR
Title 21,177.1520 Olefin polymers.

Storage

Bags should be stored in dry/closed conditions at temperatures below 500C and protected

Recommendation: from UV/ direct sunlight

Barbaros Mah. Dereboyu Cad. Uphill Court Towers A Blok K:25 D:139 Bati Atasehir, Istanbul /Turkey
Phone: +902166883310, Fax:+902166883311

You might also like