Scribd
Upload
813 views1 page

Stub Ends Ansi b16.9

This document provides specifications for lap joint stub ends according to ANSI B16.9, including nominal pipe sizes from 1/2" to 24", dimensions, example weights, and notes. Dimensions are given for the diameter of the lap, short and long pattern dimensions, radius of fillet, outer diameter at the bevel, outer diameter of the barrel, and tolerances. Example weights in kilograms are provided for long pattern stub ends in Schedule 40S/Standard. Additional information is given on short versus long pattern stub ends, required lap thickness for special facings, dimension conformance, gasket face finish, and tolerances.

Uploaded by

hisaj4u
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
813 views1 page

Stub Ends Ansi b16.9

This document provides specifications for lap joint stub ends according to ANSI B16.9, including nominal pipe sizes from 1/2" to 24", dimensions, example weights, and notes. Dimensions are given for the diameter of the lap, short and long pattern dimensions, radius of fillet, outer diameter at the bevel, outer diameter of the barrel, and tolerances. Example weights in kilograms are provided for long pattern stub ends in Schedule 40S/Standard. Additional information is given on short versus long pattern stub ends, required lap thickness for special facings, dimension conformance, gasket face finish, and tolerances.

Uploaded by

hisaj4u
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Buttweld Fittings

Lap Joint Stub Ends - ANSI B16.9

Nominal
Pipe Size

Dimensions (based on ASME/ANSI B16.9) and example weights


Short
Diameter of
Common
Long Pattern
Radius of Fillet
Pattern
Lap

1/2
3/4

1
11/4
11/2
2
21/2
3
31/2
4
5
6
8
10
12
14
16
18
20
22
24

OD at Bevel Dimension

Dimension

in
0.84
1.05
1.32
1.66
1.90
2.38
2.88
3.50
4.00
4.50
5.56
6.62
8.62
10.75
12.75
14.00
16.00
18.00
20.00
22.00
24.00

in
2.00
2.00
2.00
2.00
2.00
2.50
2.50
2.50
3.00
3.00
3.00
3.50
4.00
5.00
6.00
6.00
6.00
6.00
6.00
6.00
6.00

mm
21
27
33
42
48
60
73
89
102
114
141
168
219
273
324
356
406
457
508
559
610

in
3.00
3.00
4.00
4.00
4.00
6.00
6.00
6.00
6.00
6.00
8.00
8.00
8.00
10.00
10.00
12.00
12.00
12.00
12.00
12.00
12.00

mm
76
76
102
102
102
152
152
152
152
152
203
203
203
254
254
305
305
305
305
305
305

mm
51
51
51
51
51
64
64
64
76
76
76
89
102
127
152
152
152
152
152
152
152

Dimension

in
1.38
1.69
2.00
2.50
2.88
3.62
4.12
5.00
5.50
6.19
7.31
8.50
10.62
12.75
15.00
16.25
18.50
21.00
23.00
25.25
27.25

mm
35
43
51
64
73
92
105
127
140
157
186
216
270
324
381
413
470
533
584
641
692

Dimension

in
0.12
0.12
0.12
0.19
0.25
0.31
0.31
0.38
0.38
0.44
0.44
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50

OD of Barrel
OD

Weight
40S/STD1

max
min
mm
in mm in mm kg/piece
3
0.90 23 0.81 21
0.14
3
1.11 28 1.02 26
0.18
3
1.38 35 1.28 33
0.30
5
1.72 44 1.63 41
0.41
6
1.97 50 1.87 47
0.55
8
2.46 62 2.34 60
1.00
8
2.97 75 2.84 72
1.56
10
3.60 91 3.47 88
2.15
10
4.10 104 3.97 101
11
4.59 117 4.47 114
3.05
11
5.68 144 5.53 141
5.30
13
6.74 171 6.59 168
6.90
13
8.74 222 8.59 218 10.45
13 10.91 277 10.72 272 18.15
13 12.91 328 12.72 323 22.25
13 14.17 360 13.97 355 29.05
13 16.18 411 15.97 406 32.69
13 18.19 462 17.97 456 38.60
13 20.24 514 19.97 507 42.68
13 22.24 565 21.97 558
13 24.24 616 23.97 609 51.30

Notes
Dimensions quoted in mm are Nominal values from B16.9 (rounded equivalents of the inch dimensions).
Refer to B16.9 for additional Max and Min metric dimensions.
OD of barrel max and min dimensions (in and mm) are rounded. Refer to B16.9 for the exact values.
Long pattern stub ends are standard. Purchaser should specify if short pattern is required.
Long pattern stub ends are also known as ASA Stub Ends.
Short pattern stub ends are used with larger flanges in Classes 300 and 600, and with most sizes in Class 900 and higher.
When long pattern stub ends are used with flanges in Classes 1500 and 2500, it may be necessary to increase the length A.
Additional lap thickness must be provided for special facings (e.g. tongue and groove); this is within length A.
Dimension B conforms to ASME/ANSI B16.5, Pipe Flanges and Forged Fittings.
Gasket face finish shall be accordance with ASME/ANSI B16.5 for raised face flanges.
For tolerances see page 6-2.
1 Long pattern weights are listed (short pattern weights are similar to MSS SP-43 lap joint stub ends, page 6-20).
Weights are approximate and based on manufacturers data (where available) for Schedule 40S/Standard fittings.
See page 6-6 for further information.

METLINE | Tel. 91-22-67496383 / 84 | Email: [email protected] | www.metline-pipefittings.in

6-19

You might also like