Scribd
Upload
632 views1 page

Sanyo Eneloop Aa Manual

This document provides specifications for the HR-3UTGA nickel-metal hydride battery. It is an AA size battery with a typical capacity of 2000mAh. It can be fast charged at 2000mA for 1.1 hours between 0-40 degrees Celsius. The battery has a nominal voltage of 1.2V, internal impedance of around 25mOhms, and dimensions of 14.35mm diameter and 50.4mm height. Charge and discharge graphs are provided showing characteristics at different temperatures and currents.

Uploaded by

Mihai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
632 views1 page

Sanyo Eneloop Aa Manual

This document provides specifications for the HR-3UTGA nickel-metal hydride battery. It is an AA size battery with a typical capacity of 2000mAh. It can be fast charged at 2000mA for 1.1 hours between 0-40 degrees Celsius. The battery has a nominal voltage of 1.2V, internal impedance of around 25mOhms, and dimensions of 14.35mm diameter and 50.4mm height. Charge and discharge graphs are provided showing characteristics at different temperatures and currents.

Uploaded by

Mihai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Cell Type HR-3UTGA

Specifications
Type : Nickel-Metal Hydride Battery

Size : AA Consumer Type

Typical

2000mAh

Minimum

1900mAh

Capacity 1)
14.35 mm
Nominal Voltage

1.2V
Fast Charge

2)

2000mA 1.1h

Charge
Fast Charge
Condition

2)

0C - 40C

Charging Current x Time

Discharge Condition

50.4 mm

Ambient Temp.

0C - 50C

Less than
Storage 90days
Condition Less than
1year

-20C - 40C
-20C - 30C

Internal Impedance 3)
(after discharge to E.V.=1.0V)
Weight

Approx. 25m(at 1000Hz)


Approx.27g

4)

Size 4) :(Diameter) x (Height)

Dimensions
(with tube)

14.35 mm

50.4 mm

14.35(D) x 50.4(H) mm

1)Single cell capacity under the following condition.


Charge : 200mA16h, Discharge : 400mA(E.V.=1.0V) at 25C
2)Use recommended charging system.
3)After a few charge and discharge cycles under the above 1) condition.
4)With tube.

Typical Characteristics
Charge

Discharge
1.6

1.8

1.6

25C

1.5

40C

1.4
1.3
1.2
Charge : 2000mA (-V=10mV)
Ambient Temp. : 0C,25C,40

1.1

Charge : 2000 mA (-V=10mV)


Rest : 1h
Discharge : 400mA,2000mA,4000mA
(E.V.=1.0V)
Ambient Temp. : 25C

1.5

0C

Cell Voltage (V)

Cell Voltage (V)

1.7

1.4
1.3
1.2
1.1
400mA

2000mA

1.0

1.0

4000mA

0.9
0

10

20

30

40

50

Charge Time (min)

60

70

500

1000

1500

2000

2500

Discharge Capacity (mAh)


2009/10

You might also like