Moisturizing Cream Body Wash with Sodium Benzoate
CL-B0065
This luxurious cream body wash is based on a paraben-free, and formaldehyde donor-free formulation at skin neutral pH suitable for the use of sodium
benzoate preservative. It contains sunflower seed oil for moisturization and hydration, leaving skin soft and smooth. The formula is cold process-able and is
stabilized with Carbopol* Aqua SF-2 Polymer, which provides structuring and suspension for even oil distribution. The polymer also provides a long,
smooth flow for easy use and pourability, as well as contributing to a creamy lather. The use of Chembetaine* CAD Surfactant and Sulfochem* ALS &
EA-3K Surfactants provides excellent detergency, viscosity response, and mildness, with rich, dense foam for a unique cleansing experience.
INCI Name, Trade Name
Weight %
Function
Product Properties:
1.
Deionized Water
23.55
Diluent
Appearance
White, viscous emulsion
2.
Tetrasodium EDTA,
Versene 220
0.05
Chelating Agent
pH
5.0 5.2
Ammonium Laureth Sulfate ( 3 mole, 28.0 % active),
Sulfochem* EA-3K Surfactant
23.80
Viscosity (mPas)****
9,000 18,000
Yield Value (dyn/cm)
600-1,200
4.
Ammonium Lauryl Sulfate (30 % active),
Sulfochem* ALS-K Surfactant
14.30
Surfactant
5.
Helianthus Annuus (Sunflower) Seed Oil,
Florasun 90
18.00
Skin Conditioner
6.
Acrylates Crosspolymer-4,
Carbopol* Aqua SF-2 Polymer (32 %TS)
6.25
Rheology
Modifier
7.
Guar Hydroxypropyltrimonium Chloride,
Jaguar Excel
0.30
Skin Conditioner
8.
Glycerin,
Glycerin U.S.P.
5.00
Humectant
D.
9.
Sodium Hydroxide (18 %TS)
~1.50**
Neutralizer
E.
10.
Sodium Benzoate,
Kalama Sodium Benzoate
0.25
Preservative
11.
Cocamidopropyl Betaine (35 %TS),
Chembetaine* CAD Surfactant
5.00
Surfactant
12.
Citric Acid (50 %TS)
~2.00***
Acidifier
A.
3.
B.
C.
Surfactant
Stability: Passed 3 months @ 45C, Passed 3 cycles freeze/ thaw
Carbopol* Aqua SF-2 Polymer (% TS)
2.0
Surfactant (% TS/Actives)
12.7
****Brookfield RV @ 20 rpm, 25C, #6 spindle, measured after 24 hours
Supplier References:
The Dow Chemical Company (2)
Lubrizol Advanced Materials, Inc. (3, 4, 6, 11)
International Flora Technologies, Ltd. (5)
Rhodia (7)
Emerald Performance Materials, LLC (10)
Clariant Corporation (12)
** qs to pH 6.5, ***qs to pH 5.0
Procedure:
1.
PART A: Combine PART A ingredients and mix until uniform. Adjust mixing
speed as needed in order to keep foaming to a minimum.
2.
Add PART B ingredients to PART A one at a time with good mixing in between
additions. (Note: It may be necessary to recalculate the amount of Carbopol*
Aqua SF-2 Polymer required depending on the %TS of the particular lot. The
amount required should be based on a final formula amount of 2.0 %TS). Mix
until uniform.
3.
PART C: In a separate vessel, pre-mix ingredients and add to the batch. Mix
until uniform.
4.
Add Sodium Hydroxide (18%) adjusting pH to ~ 6.5. Mix until uniform.
5.
Add Sodium Benzoate and Cocamidopropyl Betaine one at a time in order listed
with good mixing in between additions. Mix until uniform.
6.
Adjust pH to 5.0 5.2 with Citric Acid (50%). Mix until uniform.
CL-B0065
Edition: November 4, 2012
Previous Editions: 12/9/2010, 9/2/2010
Reference #: 1460-007-08-145 (YIYN),
1460-007-09-55 (QNXU)
Original Edition: August 11, 2010
Lubrizol Advanced Materials, Inc. / 9911 Brecksville Road, Cleveland, Ohio 44141-3247 / TEL: 800.379.5389 or 216.447.5000
The information contained herein is being furnished for
informational purposes only, upon the express condition
that the User makes its own assessment of the appropriate
use of such information. While the information contained
herein is believed to be reliable, no representations,
guarantees or warranties of any kind are made as to its
accuracy, suitability for a particular application or the
results to be obtained herefrom. Lubrizol Advanced
Materials, Inc. ("Lubrizol") cannot guarantee how any
products associated with this information will perform
in combination with other substances or in Users
process. Due to the variations in methods, conditions
and equipment used commercially in processing these
materials, no warranties or guarantees are made as to
the suitability of the information/products for the
applications disclosed. Lubrizol shall not be liable and
the User assumes all risk and responsibility for, any use
or handling of any material beyond Lubrizol's direct
control. LUBRIZOL MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY
OR
FITNESS
FOR
A
PARTICULAR PURPOSE. It is the Users sole
responsibility to determine if there are any issues
relating to patent infringement of any component or
combination of components relating to the supplied
information. Nothing contained herein is to be
considered as permission, recommendation, nor as
an inducement to practice any patented invention
without the permission of the patent owner.
For further information, please visit: www.lubrizol.com/personalcare
Lubrizol Advanced Materials, Inc. is a wholly owned subsidiary of The Lubrizol Corporation
*Trademark owned by The Lubrizol Corporation
Copyright 2012 / The Lubrizol Corporation
