Scribd
Upload
318 views1 page

Rl-45 50-Bn Groen GB

This document provides recommendations for mixing and storing Dramix RL-45/50-BN steel fibres for reinforcing concrete. The fibres are 45mm long with a hooked end and aspect ratio of 48. They are used to reinforce industrial floors and slabs. When mixing, the fibres should be added slowly into fresh concrete and mixed for 4-5 minutes at high speed. When storing, pallets of fibre bags should be protected from rain and not stacked on top of each other.

Uploaded by

anastasios
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
318 views1 page

Rl-45 50-Bn Groen GB

This document provides recommendations for mixing and storing Dramix RL-45/50-BN steel fibres for reinforcing concrete. The fibres are 45mm long with a hooked end and aspect ratio of 48. They are used to reinforce industrial floors and slabs. When mixing, the fibres should be added slowly into fresh concrete and mixed for 4-5 minutes at high speed. When storing, pallets of fibre bags should be protected from rain and not stacked on top of each other.

Uploaded by

anastasios
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

BEKAERT

PRODUCT DATA SHEET

Recommendations - mixing

Dramix

1. General
preferably use a central batching

R L -45/5045 50 B N
45

65

Description:

80
Bright

l/d

Low
Carbon

Dramix fibres are filaments of


wire, deformed and cut to
lengths, for reinforcement of
concrete, mortar and other
composite materials.
Dramix RL-45/50-BN is a
loose cold drawn wire fibre,
with hooked ends.

Applications:
- industrial floors
- slabs on vibrocompacted piles

plant mixer
recommended maximum dosage:
Max.
aggregate
size (mm)

Dosage (kg/m3)
pour
160
100
80

8
16
32

pump
120
75
60

a continuous grading is preferred


2. Fibre addition
Bags are
non-degradable and
may not be thrown
into the concrete.

Geometry:

45
45

65

80
l/d

Aspect ratio
(= l/d): 48
2800 fibres/kg

1,05 mm

Tensile strength:
- on the wire: 1000 N/mm2
- low carbon conforms to EN 10016-2 - C9D

Coating: None
Approvals:
Conforms to

in the mixer

fibres can be introduced together with

Diameter (d)

Quality System in
Belgian, Brasilian, Czech,
Turkish and Chinese plants

ASTM A820
Product

Product

Belgium

Poland

ATG 04/1857

AT-15-2117/2001

Slovak Republic

Romania

1402A/02/0771/1/C/C04

007-01/068-2003

Czech Republic

Germany

C.070-021415

Z-3.71-1745

sand and aggregates, or can be added


in freshly mixed concrete

2.2. Truckmixer
run mixer at drum speed: 12-18 rpm
adjust slump to a min. of 12 cm
(preferably with water reducing agents or
high water reducing agents)
add fibres with maximum speed of
60 kg/min
optional equipment: belt-hoist elevator
after adding the fibres, continue mixing at
highest speed for 4-5 min. ( 70 rotations)

Recommendations - storage
Delivered in

Protect the pallets


against rain

Do not stack the


pallets on top of
each other

non waterbig bag


soluble bags 900 kg
of 20 kg on
pallet 1200 kg

Turkey

TS 10513
Technical data:
For industrial floors, ask for specialized documentation

N.V. Bekaert S.A. - Bekaertstraat 2 - 8550 Zwevegem - Belgium


Tel. +32 (0) 56 / 76 69 86 - Fax +32 (0) 56 / 76 79 47
Internet: http://www.bekaert.com/building
Values are indicative only. Modifications reserved. All details describe our products in general form
only. For ordering and design only use official specifications and documents. N.V. Bekaert S.A. 2005

www.apunta.be - 02/2005

50 mm

2.1. In batching plant mixer


never add fibres as first component

Resp. editor: Ann Lambrechts, Lauwe

Length (l)

Performance
class: 45

You might also like