Scribd
Upload
143 views2 pages

XP XS Short Manual

The document provides instructions for basic functions and additional functions of METTLER TOLEDO XP/XS analytical and precision balances. It describes how to switch the display on and off, zero the balance, tare the balance, choose applications, and perform tests and internal adjustments.

Uploaded by

zpoturica569
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
143 views2 pages

XP XS Short Manual

The document provides instructions for basic functions and additional functions of METTLER TOLEDO XP/XS analytical and precision balances. It describes how to switch the display on and off, zero the balance, tare the balance, choose applications, and perform tests and internal adjustments.

Uploaded by

zpoturica569
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Short Operating Instructions

For further information, please refer to the operators Manual

METTLER TOLEDO
XP / XS Analytical- and Precision Balances
Basic Functions:
Switching on
and off
Display
1. Switch on display:
Press the On/Off
key briefly. The display
performs a test and is
then ready to weigh.

On
Off

2. Switch off Display;


Press and hold the
On/Off key until the
message OFF appears in the display.
The display then fades
and the balance is
switched off.

On
Off

User Profile: *only XP


Choose
User Profile

Tare
Display

Additional Functions:
XS Balance
WeighingI
Applications

Test:
Levelling, Internal
Adjustment
(Factory setting)

Zeroing: Press the


G to set a new
zero point.

Taring: If you work with


a Tare container, first
zero the balance. Then
put the Tare container
on the balance and
press H, to tare
the balance.

Choose the application: If you want to


change the application,
then press the application menu button and
choose another application.

1. Level indicator is builtin in the device.

G
Always use the G
before you start the
weighing procedure.

XP Balance

2. Level indicator is not


centered.*

H
3. Release the clamps.*

Weighing Setup: For more precision / shorter stability time

Weighing filters:
Weighing mode

Weighing filters:
Environment

Weighing filters:
Value Release

1. Choose System-Setup

1. Choose System-Setup

1. Choose System-Setup

2. Define Weighing parameters

2. Define Weighing parameters

2. Define Weighing parameters

4. Levelling.After this process, lock the clamps


again.*

5. Internal Adjustment

This key can be used to


call up the desired user
profile.Different settings
can be stored in a user
profile.

Example

Zero
Display

3. Define the Weighing


mode

3. Define Environment

Advise:
Solids:
Universal

Advise:
Fume cupboard unstable weighing table:
Unstable,
Very unstable

Powder, Liquid:
Dosing

3. Define Value Release


Pressing this function
key triggers a balance
adjustment using the
built-in calibration
weight. This can be
implemented at any
time.

Stable Weighing table,


no drafts
Standard, Stable

Advise:
Highest Precision:
Very reliable
Fast Value Release:
Very fast,
but less precision
* depending on balance

METTLER TOLEDO Excellence Plus and Excellence Balances


Overview of the Terminal XP Analytical- and Precision balances:
XP Display Terminal

2. Button Home:
This key can be used
to return to theHome
user profile from any
menu level in any
application.
3. Button User profile:
This key can be used
to call up the desired
user profile. Different
settings can be stored
in a user profile.

1
6

2
3
4
5

4. Status bar:
If the left or right
SmartSens is assigned a key function, then the corresponding symbol
is highlighted.

On touch
- e.g. start the internal adjustment

4
EXCELLENCE PLUS

1. Button SmartSens:
Each of these two
contact-free sensors
can be assigned a key
or menu function.

One touch
- change the time

5. System-Setup:
Define the basic
settings.
6. Select the application.

7. Button ApplicationsSetup:
Each application
can be optimized
to the current task
using a number of
settings.

8. Printer:
Pressing this key
transmits data via
the interface.

Overview of the Terminal XS Analytical- and Precision balances:


XS Display Terminal
1. Button Home:
This key can be used
to return to theHome
user profile from any
menu level in any
application.
2. Weighing application:
By pressing this symbol
you can choose the
desired application.
3. Button ApplicationsSetup:
Each application can
be ideally adapted to
the current task using
a number of settings.

Mettler-Toledo AG 2008

On touch
- e.g. start the internal adjustment

3
4

4. Printer:
Pressing this key
transmits data via
the interface.

11781027 Printed in Switzerland 0807/7.12

Mettler-Toledo AG, Laboratory & Weighing Technologies, CH-8606 Greifensee, Switzerland


Phone +41-44-944 22 11, Fax +41-44-944 30 60, Internet: http://www.mt.com

*11781027*

You might also like