Scribd
Upload
4K views1 page

Bolt Torque Chart

This document provides a torque table listing indicative torque values in daN.m for bolt diameters ranging from 16mm to 125mm. The table gives recommended torque values for bolt grades 6.8, 8.8, 10.9, 12.9, B7 and B8. A note indicates that the values represent a guideline and are calculated based on a friction coefficient of 0.015, as per norm NFE 25.030. It also includes conversions between Newton meters (N.m), daN meters (daN.m), meter kilograms (m.kg) and foot pounds (ft.lbs).

Uploaded by

idxh756
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4K views1 page

Bolt Torque Chart

This document provides a torque table listing indicative torque values in daN.m for bolt diameters ranging from 16mm to 125mm. The table gives recommended torque values for bolt grades 6.8, 8.8, 10.9, 12.9, B7 and B8. A note indicates that the values represent a guideline and are calculated based on a friction coefficient of 0.015, as per norm NFE 25.030. It also includes conversions between Newton meters (N.m), daN meters (daN.m), meter kilograms (m.kg) and foot pounds (ft.lbs).

Uploaded by

idxh756
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

BOLT / TORQUE TABLE in daN.

m
Indicative Torque Value
This represents only a guide line

Bolt
Diameter S.P. mm A.F. inch % Re 6.8 8.8 10.9 12.9 B7 B8
mm
16 24 15/16 85% 15 2 29 34 23 7
18 27 1"1/16 85% 20 27 40 47 32 9
20 30 1"3/16 85% 29 39 57 67 45 13
22 32 1"1/4 85% 40 53 78 92 61 17
24 36 1"7/16 85% 50 67 98 115 77 22
27 41 1"5/8 85% 74 99 145 170 114 32
30 46 1"13/16 85% 100 134 197 230 155 44
33 50 2" 85% 137 182 268 313 210 60
36 55 2"3/16 85% 176 234 343 402 270 77
39 60 2"3/8 85% 228 304 446 522 352 100
42 65 2"9/16 85% 282 376 553 647 435 123
45 70 2"3/4 85% 353 471 692 809 545 155
48 75 2"15/16 85% 425 566 832 974 655 186
52 80 3"1/8 85% 549 732 1074 1257 845 240
56 85 3"3/8 85% 680 907 1333 1559 1049 298
60 90 3"9/16 85% 848 1130 1660 1943 1306 371
64 95 3"3/4 80% 962 1283 1884 2205 1483 421
68 100 3"15/16 77% 1123 1497 2199 2573 1731 491
72 105 4"1/8 75% 1310 1747 2566 - 2020 573
76 110 4"5/16 65% 1347 1796 2638 - 2077 589
80 115 4"9/16 57% 1388 1851 - - 2140 607
85 120 4"3/4 53% 1558 2078 - - 2402 682
90 130 5"1/8 50% 1766 2355 - - 2725 773
95 135 5"5/16 47% 1962 2616 - - 3025 858
100 145 5"11/16 45% 2213 2951 - - 3412 968
110 155 6"1/8 40% 2636 3515 - - 4064 1153
115 165 6"1/2 37% 2808 - - - 4330 1229
120 170 6"11/16 37% 3198 - - - 4931 1399
125 180 7"1/16 35% 3443 - - - 5308 1506
Above data are calculated with the norm NFE 25.030 for a friction coefficient .015. This is a guide line only

Conversion : N.m daN.m m.kg ft.lbs


1 N.m - 0.1 0.102 0.738
1 daN.m 10 - 1.02 7.38
1 m.kg 9.81 0.98 - 7.24
1 ft.lbs 1.35 0.135 0.138 -

You might also like