Cisco Command Juniper Command Co-Ordinating Definition
show run sh configuration Show running configuration
sh ver sh ver Show version
displays the status of interfaces configured for
show ip interface brief show interface terse
IP
show interfaces [intfc] displays the interface configuration, status and
show interface [intfc]
detail statistics.
show interfaces intfc displays information about a physical port
show controller intfc
extensive device
show interface | incl show interfaces displays the interface configuration, status and
(proto|Desc) description statistics
displays summary information about entries in
show ip route show route
the routing table
displays the status of all Border Gateway
show ip bgp summary show bgp summary
Protocol (BGP) connections
show route protocol bgp will show you how that route is being
show ip bgp net mask
prefix advertised, look for the first line
show ip bgp net mask will show you how that route is being
show route range prefix
longer-prefixes advertised, look for the first line
show ip bgp regexp show route aspath- displays routes matching the autonomous
AS-regexp regexp “AS-regexp” system (AS) path regular expression
show route receive-
protocol bgp neigh
show ip bgp neighbors Shows whether a neighbor supports the route
show route source-
neigh received-routes refresh capability
gateway neigh protocol
bgp
show ip bgp neighbor show route advertising- Shows whether a neighbor supports the route
neigh advertised-routes protocol bgp neigh refresh capabilty
show clns neighbors show isis adjacency displays both ES and IS neighbors
show clns interface show isis interface shows specific information about each interface
displays the current state of the the routing
show ip route isis show isis routes
table
displays a list of all connected routers in all
show isis topology show isis spf
areas
show ip ospf interface show ospf neighbor shows neighbor ID, Priority, IP, & State if the
neighbor router, dead time.
shows neighbor id, pri, state, dead time, address
show ip ospf interface show ospf interface
and interface
show ip route ospf show ospf route display the current state of the routing table
display list of information related to the OSPF
show ip ospf database show ospf database
database for a specific communication server
display the system hardware config., software
show version, show
show version version, and name and source of configuration
system uptime
files and boot images
show diags show chasis hardware displays power-on diagnostics status
show processes cpu show system process displays utilization statistics
displays the current software image,
show tech-support request support info configuration, controllers, counters, stacks,
interfaces, memory and buffers
show logging show log messages display the state of logging to the syslog
displayall route-maps configured or only the
show route-map name show policy name
one specified
show ip prefix-list display information about a prefix list or prefix
show policy name
name list entries
configure,
show ip community-list display routes that are permitted by BGP
show policy-options
list community list
community name
show chassis displays temperature and voltage information
show environment all
environment on the console
ping dest rapid (for
cisco like output)
ping dest to check to see if a destination is alive
ping dest (for unix like
output)
ping (setting source int) ping dest bypass-routing to check to see if a destination is alive
terminal monitor monitor start messages Change console terminal settings
terminal no monitor monitor stop Change console terminal settings
terminal length 0 set cli screen-length 0 sets the length for displaying command outpu
Label: Kerjaan
0 komentar:
Poskan Komentar
