Scribd
Upload
164 views

Microprocessors & Micro Controllers - I

The document outlines the syllabus for a course on microprocessors and microcontrollers. It covers the basics of the 8085 and 8051 microprocessors, including their architecture, instruction sets, and interfacing with peripherals. Students will learn about 8085 and 8051 programming, addressing modes, interrupts, timers, serial communication, and interfacing with devices like LCDs, keyboards, and motors. The syllabus also introduces the ARM processor architecture and compares 8051 derivatives. The course aims to provide an overview of popular microprocessors and microcontrollers as well as hands-on practical experience.

Uploaded by

drake12345
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
164 views

Microprocessors & Micro Controllers - I

The document outlines the syllabus for a course on microprocessors and microcontrollers. It covers the basics of the 8085 and 8051 microprocessors, including their architecture, instruction sets, and interfacing with peripherals. Students will learn about 8085 and 8051 programming, addressing modes, interrupts, timers, serial communication, and interfacing with devices like LCDs, keyboards, and motors. The syllabus also introduces the ARM processor architecture and compares 8051 derivatives. The course aims to provide an overview of popular microprocessors and microcontrollers as well as hands-on practical experience.

Uploaded by

drake12345
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Vidyalankar

T.E. Sem.V [ETRX/EXTC]


Microprocessors & Microcontrollers - I

SYLLABUS
Time : 3 Hrs. Theory : 100 Marks
Term Work : 25 Marks
Practical : 25 Marks
1. Basics of 8085:
Basic 8085 microprocessor architecture and its functional blocks, 8085 microprocessor IC pin outs
and signals, address, data and control buses, 8085 features, Interrupt system of 8085, Stack and
subroutine, Types of memory and memory interfacing, Decoding techniques − absolute and partial,
Mapping techniques − I / O mapped I/O and memory mapped I/O, Serial I/O lines of 8085 and the
implementation asynchronous serial data communication using SOD and SID.

2. Programming with 8085 :


Basic instruction set, Timing states, machine cycles and instruction cycles, Instruction timing diagram
and interrupt process and timing diagram of interrupt instruction execution, Writing assembly
language programs, Looping, counting and indexing operations related programs, stacks and
subroutines operations related programs, Conditional call and return instructions operations related
programs, Debugging programs.

3. Study and interfacing of peripherals 8155, 8255, 8253/8254, 8259 with 8085

4. Basics of 8051 :
Comparison of microprocessor and microcontroller, Architecture and pin functions of 8051 chip
controller, CPU timing and machine cycles, Internal memory organization, Program counter and
stack, Input/output ports, Counters and timers, Series data input and output, Interrupts, Power saving
modes.

5. Programming with 8051 :


Instruction set, addressing modes, Immediate, registers, direct and indirect data movement and
exchange instructions, push and pop op-codes, arithmetic and logic instructions, bit level operations,
jump and call instructions, input / output port programming, programming timers, asynchronous
serial data communications, and hardware interrupt service routines.
Interfacing of LCD display, hex keyboard, ADC0808, DAC0808 and stepper motor with 8051 current
trends in microprocessors and practical implementation

6. Introduction to ARM Processor :


ARM family architecture, Register architecture, Memory Access and addressing modes, Arithmetic
and Logical Instructions, Branching Instructions.
Comparative study of salient features of 8051 and its derivatives like 89C51, 89C52, 89C2051 AND
89C2052, Current processor and controller survey, (cost, availability, popularity)

‰‰‰‰‰‰

You might also like