Scribd
Upload
201 views1 page

Billy Bride Ring Sizer

This document provides instructions for determining ring size using a printable ring sizer: 1. Carefully follow the instructions to obtain an accurate ring size measurement. 2. Ensure the 1 inch bar printed is exactly 1 inch long to calibrate the paper size. 3. Select a ring that fits the intended finger, then match the inside edge of the ring to the nearest size circle to determine the ring size in millimeters or US size.

Uploaded by

bilybride
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
201 views1 page

Billy Bride Ring Sizer

This document provides instructions for determining ring size using a printable ring sizer: 1. Carefully follow the instructions to obtain an accurate ring size measurement. 2. Ensure the 1 inch bar printed is exactly 1 inch long to calibrate the paper size. 3. Select a ring that fits the intended finger, then match the inside edge of the ring to the nearest size circle to determine the ring size in millimeters or US size.

Uploaded by

bilybride
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

BILLY BRID E P R I N T A B L E R I N G S I Z E R

HOW TO DET ER M INE YO U R RING S IZE

CONFIRM PRINTED PAPER SIZE


1. Ring measurements are very precise. Carefully follow these instructions to obtain an
0 1 in
accurate measurement.

2. Prior to printing, ensure that Page Scaling is set to “None” on your print dialog box.
(To open the print dialog box, press CTRL+P.)

3. Measure the bar on the left. It must be exactly 1 inch or 30 mm long.


0 10 20 30 mm

MEASURE CURRENT RING


1. Select a ring that properly fits the intended finger.
diameter
Engagement and wedding rings are traditionally
worn on the ring finger on the left hand in the
United States.

2. Place the ring over the circles below, matching the


inside edge of the ring to the circle nearest in size. MEASUREMENTS MATCH THE
INSIDE EDGE OF THE RING
This measurement refers to the diameter of
the ring.

3. If the ring falls between two sizes, order the


Size 3 Size 3½ Size 4 Size 4½ Size 5
larger size. 14.1 mm 14.5 mm 14.9 mm 15.3 mm 15.7 mm

Size 5½ Size 6 Size 6½ Size 7 Size 7½ Size 8 Size 8½ Size 9 Size 9½


16.1 mm 16.5 mm 16.9 mm 17.3 mm 17.7 mm 18.1mm 18.5mm 19.0 mm 19.4 mm

Size 10 Size 10½ Size 11 Size 11½ Size 12 Size 12½ Size 13 Size 13½
19.8 mm 20.2 mm 20.6 mm 21.0 mm 21.4 mm 21.8 mm 22.2mm 22.6mm

MEASUREMENTS REFLECT RING SIZES IN THE US AND CANADA

You might also like