Scribd
Upload
104 views1 page

Butterfly Valve

The document summarizes the specifications for two butterfly valves including size, material composition, manufacturer, and necessary accessories. It describes valve 1 as a ring type R500 valve without an actuator that is suitable for an AUMA actuator and valve 2 as a butterfly valve with an electric actuator, both 200mm in diameter and 10 bar pressure rating, made of various metal and non-metal materials by manufacturer SCHMITZ-SCHUTLE GmbH. It also notes testing and a distance piece must be provided to match the items.

Uploaded by

Zulfiqar Ali
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
104 views1 page

Butterfly Valve

The document summarizes the specifications for two butterfly valves including size, material composition, manufacturer, and necessary accessories. It describes valve 1 as a ring type R500 valve without an actuator that is suitable for an AUMA actuator and valve 2 as a butterfly valve with an electric actuator, both 200mm in diameter and 10 bar pressure rating, made of various metal and non-metal materials by manufacturer SCHMITZ-SCHUTLE GmbH. It also notes testing and a distance piece must be provided to match the items.

Uploaded by

Zulfiqar Ali
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

BUTTERFLY VALVE (RING TYPE R500_ without Actuator

SIZE: DN200, PN: 10,


SR. NO. R50676-01-04
SUITABLE FOR AUMA ACTUATOR TYPE SD 56.1-2/45
MAKE: SCHIMITZ-SCHUTLE (S+S), GmbH
QTY 02 NOs

BUTTERFLY VALVE, TYPE: K6/PN10 WITH Electric Actuator


SIZE: DN200, PN: 10,
Renewable seating, reinforced, water type execution, for mounting between flanges acc.
To DIN 2501. Face to face dimension acc. To DIN EN558-1, Row 20 (K1) type: k60b,
with bare shaft, connection Flange actuator Auma SG07, delivered under
Sr. No.R50676-01-04,
Material Body: GG25, one piece,
Disc: 1.4408
Seating: NBR, reinforced on seating
Shaft: 1.4005, one piece, Bush: Bronze,
Painting: Zinc plated with 2-compount epoxy painting, approx.50Um RAL 5015,
Make: SCHMITZ-SCHUTLE (S+S) GmbH.

Note: following Accessories/Certificates should be provide with the item to make it


matching & replaceable with Item at Serial # 01 required:
a) ID for Distance piece: DN200, for face to face compensation between the length
of the old valve type R5 and the new valve type k6, Made of steel, epoxy coating.
b) Hydrostatic pressure test , seat leakage and functional test acc. To DIN En
12266.3.1
Qty 02 Nos

You might also like