May / Jun 2011

BIG
Tools
BIGGER
Savings

$275 $1 999
6 DRAWER
TOOLCHEST 262PC Toolkit,
• 660 x 307 x 377mm • Fully Lockable • Heavy Duty
Handles • Ball Bearing Slides A12100 Metric & AF
• 3 Drawer Ute Box
• 1/4, 3/8 & 1/2’’ DR
Sockets & Accessories
• High Density Foam
Insert Trays
• Combination Spanner Sets
• Open End, Flare Nut &
Ring Spanner Sets
• Adjustable Wrenches
• Screwdriver Set
• Ball Pein Hammer
• Punch & Chisel Set

$129
• Combination, Longnose, Diagonal
Cutting, Locking & Multigrip Pliers
• Hacksaw
• Hex & Star Bit Set
24PC 1/2" DR SOCKET SET, METRIC & AF
ATK703U
• Metric Sockets: 8 - 19mm • AF Sockets: 3/8 - 3/4"
• Ratchet • 125 & 250mm Extension Bars
• Universal Joint • 1/2 M to 3/8" F Adaptor A13275

End Of Financial Year

Bargains!!!
‘Tools to last a lifetime’ www.kctools.com.au

YOUR LOCAL KC DISTRIBUTOR▼

$119ea
7PC ONE WAY GEAR RATCHET
SPANNER SETs:
• A13560; Metric: 8 - 19mm • CR-V
• A13550; AF: 5/16 - 3/4” • CR-V

More Great Deals Inside...

 Professional Gear

$40.90ea $46.50 $156.50

6PC 3/8” DR IN-HEX SOCKET SETS: 28PC HEX & STAR BIT SET 37PC 3/8” DR STD & DEEP SOCKET SET, METRIC
• 10191; Metric: 4, 5, 6, 7, 8 &10mm • Hex Metric: 4 - 14mm • Hex AF: 5/32 - 9/16” • Standard Sizes: 6 - 22mm • Deep Sizes: 8 - 22mm
• 10190; AF: 1/8, 3/16, 1/4, 5/16, 3/8 & 7/16" • Star: T20 - T60 • 3/8 & 1/2” Bit Adaptors • Ratchet • 75 & 150mm Extensions • Uni Joint
A13395 • 225mm Flex Head • 13/16 & 5/8” Spark Plug Sockets
A13255

Awesome
Value!!!

$49.50 $189 $167.90

9PC 1/2’’ DR E SOCKET SET 43PC 1/2’’ DR SOCKET SET, METRIC & AF 37PC 1/2” DR SOCKET SET, METRIC & AF
• E10, E11, E12, E14, E16, E18, E20, E22 & • Metric: 8 - 32mm • AF: 3/8 - 1-1/4’’ • Ratchet • Metric: 8 - 32mm • AF: 3/8 - 1-1/4”
E24 13420 • 75 & 125mm Extensions • Sliding T Bar • Ratchet • 75 & 125mm Extensions • Sliding T Bar
• 375mm Flex Head • Universal Joint • 1/2 F to 3/8’’ M • 1/2 F to 3/8” M Adaptor A13175
Adaptor • 13/16 & 5/8” Spark Plug Sockets A13170

$96 $499.90 $999ea

5PC OBSTRUCTION SPANNER SET, METRIC 26PC 3/4” DR SOCKET SET, METRIC & AF 22PC 1” DR SOCKET SETS:
• 10 x 12, 13 x 15, 14 x 17, 16 x 18 & 19 x 22mm • Metric: 22 - 50mm • AF: 1- 2” • Ratchet • 460mm • A13366; Metric: 35 - 80mm • Ratchet • 560mm
• CR-V • Corrosion Protected A13200 Sliding T Bar • 100 & 200mm Extension Bars A13362 Sliding T Bar • 200 & 400mm Extensions
• A13367; AF: 1-1/2 - 3-1/8” • Ratchet • 560mm Sliding
T Bar • 200 & 400mm Extensions

Massive
Savings!!!

$79.90
12PC COMBINATION SPANNER SETS: 14PC COMBINATION SPANNER SET, METRIC & AF
• A13336; Metric: 7, 8, 9, 10, 11, 12, 13, 14, 15, • Metric: 10, 12, 13, 14, 15, 17 & 19mm
17, 19 & 21mm • CR-V $105 • AF: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 & 3/4’’ • CR-V
• A13334; AF: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, A13502
3/4, 13/16, 7/8 & 15/16” • CR-V $127

2 Visit us online for more information about KC TOOLS : www.kctools.com.au

to last a lifetime!!!
2 DRAWER
• 735 x 465 x 475mm
UTE BOXES
• 46.5kg UO2

4 DRAWER
• 735 x 465 x 697mm

$530 • 68.5kg UO4

• 2 Lift Out Trays

$489
• Top Drawer With 4
Divisions
• Heavy Duty Lock
Mechansim
• Hydraulic Ram
Lifts
ATK46 100PC TOOLKIT, METRIC & AF • Heavy Duty Handles

$689
• 5 Tray Cantilever Toolbox • HDFI Tray: 45PC 1/4 & 3/8” DR Socket Set • Hammer Tone Paint Finish
• Screwdriver Set • Locking/Combination/Longnose Pliers • Diag. Cutters • UV Stabilised for Outside Conditions
• Multigrips • Adjustable Wrench • Hex Key Sets • Combination Spanner • Can Be Bolted To The Back Of A Ute
Set • Ball Pein Hammer • Knife • Angled Corners

ATK701BB
269PC Toolkit, Metric & AF
265PC Toolkit, • 11 Drawer Roll Cab • HDFI Trays
• Adjustable Wrenches • Hex Key Set
• Punch & Chisel Sets • Various Pliers
Metric & AF
ATK806BB
• Multigrips • Various Spanner Sets
• Ball Pein Hammer
265PC Toolkit, METRIC & AF • Screwdriver Set
• 5 Drawer Tool Chest • 1/4, 3/8 & 1/2” DR Sockets and
& 3 Drawer Roll Away Accessories
• HDFI Trays • Power Tool Adaptor Set
• 1/4, 3/8 & 1/2” Dr • Brake Adjuster
Standard and Deep • Pro Hacksaw • Bit Set
Sockets and • Podger Bar • Gasket
Accessories Scraper Set
• 1/2” Dr Impact Sockets • Feeler Gauge

$1990 $2695
• Combination
Spanner Set
• Screwdriver
Sets
• Hex Key Set
• Bit Set
• Various Pliers
• Adjustable
Wrench
• 1/2” Dr Mini
Impact Wrench
• Ball Pein
Hammer
• Hook & Pick Set

Super Saver!

$2385 $285.50
ATK18 326PC WALLCABINET TOOLKIT, METRIC & AF TCW1 WALL CABINET
• High Density Foam Insert Trays • 1/4, 3/8 & 1/2’’ Dr Sockets & Accessories • 661 x 194 x 911mm
• 7PC Punch & Chisel Set • 7PC Short Series Pin Punch Set • Podger Bar • Hacksaw • Fully Lockable
• 5PC Screw Extractor Set • Ball Pein Hammer • 6PC Precision Screwdriver Set • Offset Screwdriver • Ball Bearing Slides
• 13PC Screwdriver Set • Feeler Gauge • Pliers • Brake Adjuster • Adjustable Wrenches • 30PC Hex Key Set
• 6PC Ring Spanner Sets • 6PC Open End Spanner Sets • 24PC Combination Spanner Set • 54PC Bit Set

Visit us online for more information about KC TOOLS : www.kctools.com.au 3

 Nothing above $30 !!!
BATTERY CLEANER BRUSH TYRE LEVERS OIL FILTER REMOVER TELE. INSPECTION MIRROR 2PC SEAL PULLER
• Int./Ext.Wire Brushes 10458 • 380mm, 340g 07125 • 87 - 97mm • Handle L: 195mm • • D: 32mm • L: 165-480mm 08300 • 166 & 180mm 10423
265g 08134

$4.50 $9.50 $6.90 $7.00 $4.90

TYRE VALVE TOOL 2PC HOSE PINCHERS BRASS CHUCK • Clip-On Type 3PC GASKET SCRAPER SET ENGINE CLEANING GUN
• “4 in 1” 10450 • Vacuum/Fuel Line 08165 • 1/4” 08552 • L - 276, 280 & 285mm 08103 • Capacity - 12 Bar 30260

$2.00 $12.00 $4.50 $17.90 $19.50

TYRE GAUGE END FEELER GAUGE MET/AF UNI. HARMONIC BALANCER DIVIDER • Range - 0 - 190mm STRAP WRENCH
• 0 - 50 PSI 08568 • 32 Blade • Length - 100mm • Puller • Forged Alloy Steel • 200mm 50175 • Handle - 300mm
40032 10712 • Strap - 825mm 15110

$6.50 $7.00 $18.90 $13.50 $23.50

PARTS CLEANING BRUSH 4 ROW HAND WIRE BRUSH GASKET SCISSORS • 140mm 10PC UTILITY KNIFE BLADES HEAVY DUTY TRIMMING KNIFE
• 285mm • Stiff Bristles 08350 • 225mm • Stainless steel 09206 • Hi-Tensile St. Steel Blades 17255 • 45mm Width 12416 • 175mm 12408

$2.00 $1.50 $19.00 $4.50 $12.00

STEEL RULER 1/2” DR SOCKET HOLDER 3PC 1/4, 3/8 & 1/2” DR SOCKET 13PC DRILL BIT SET, AF 7PC SHORT SERIES PIN
• 0 - 150mm • 0 - 6” 50170 • 410mm • Holds Up to 15 Skts HOLDER SET • Each Rail Holds • 1/16 - 1/4” WDS13A PUNCH SET • 2, 2.5, 3, 4, 5, 6 &
10197 Up to 15 Sockets • 410mm 10198 6.5mm A7210

$1.50 $4.50 $9.00 $11.90 $26.50

8PC HEX KEY SETS: 3pc Offset Screwdriver 2 WAY STUBBY SCREWDRIVER 6PC Prec. S/driver Set • 4 5PC CENTRE PUNCH SET
• A13058M; 1.5 - 6 • A13058; Set • Blades + Phillips 10027 • Mini Reversible 16260 Blade: 1 - 2.4mm • 2 Ph: 3 - 3.5mm • No. 2, 2.5, 3, 4 & 5 A7220
1/16 - 1/4’’ 19009

$20.90ea $5.50 $11.50 $3.00 $17.50

AIR RECOIL HOSE • Thread Size BALL. PEIN HAMMER • 650g TAPE MEASURE 4PC MINI CIRCLIP PLIER SET CRIMPING PLIERS TOOLKIT
- 1/4” • 7.6m • PVC SA225 • 340mm 15011 • 10M • Dual Scale • 400g 10400 • 140mm • Int/Ext. Str & Bent • 240mm • 100 Terminals 10636
17150

$11.50 $11.00 $8.50 $18.50 $22.50

CIRC. PLIERS: •180mm LONGNOSE PLIERS • 200mm MINI DIAG. CUTTING PLIERS BENT NOSE PLIERS • 200mm EXTRA LONG NOSE PLIERS
• 17670 / 71; Int / Ext Str • Heavy Grip • CR-V 17361H • 115mm 17402 • 45° • Light Ins. • CR-V 17391 • 280mm • 320g 10810
• 17672 / 73; Int / Ext. Bent

$20.90ea $26.00 $10.50 $23.90 $7.50

LOCKING PLIERS • 150mm LOCKING PLIERS • 250mm LOCKING PLIERS • 250mm LOCKING PLIERS: WELDING CLAMP LOCKING
• Longnose • CR-V 17027 • CR-V 17031 • Straight jaws + cutter • CR-V • 17018; 125mm, CR-V $18.90 PLIERS • 230mm • CR-V 17046
17033 • 17019; 175mm, CR-V $19.90

$14.00 $17.50 $18.50 From $18.90 $14.50

4 Visit us online for more information about KC TOOLS : www.kctools.com.au
 Massive Tools Sale!
$23.50
LONGNOSE PLIERS
• 200mm • Light Insulation • Cutting Force - 1.6/580N
• Cutting Edge Hardness - 58HRC UP • CR-V
$29.90
17361

1/4” DR BANJO RATCHET

Ready
• 72 Teeth • 142mm • 140g • 75 Nm • CR-V NH14

$39.50
to
COMBINATION PLIERS:
• Heavy Insulation • Cutting Force - 1.6/580N
• Cutting Edge Hardness - 58HRC UP • CR-V
• 17351H; 180mm $25.90
3/8” DR BANJO RATCHET
• Flex Head Bent • 72 Teeth • 260mm • 430g
Save
• 202 Nm • CR-V NH40
• 17352H; 2000mm $28
$40.50 Money
1/2’’ DR BANJO RATCHET
• 72 Teeth • 254mm • 620g • 512 Nm • CR-V NH13
???
MULTIGRIP PLIERS:

$107
• Curved Jaw • Body Hardness - 43HRC UP • CR-V
• 17382; 400mm, Maximum Jaw Opening - 82.3mm $79
• 17383; 500mm, Maximum Jaw Opening - 136.7mm $142
1/4” DR TORQUE WRENCH
• 5-29 Nm • 3 - 20 Ft Lb • 350mm H47

$46.90 $107
CRIMPING PLIERS 3/8” DR TORQUE WRENCH
• 215mm • High Power Crimping Ideal For Insulated • 5-29 Nm • 3 - 20 Ft Lb • 385mm H48
Terminals 10638

$895
1” DR TORQUE WRENCH

$75 • 135-950 Nm • 100 - 700 Ft Lb • 1230mm H54

4PC CIRCLIP PLIER SET

• 140mm • Capacity - 8 - 25mm • Int/Ext Straight
• Int/Ext Bent 17659
$99
3/4’’ DR FLEX HEAD BAR
• 1000mm • Handle Made From CR-V • Head Made From CR-MO KC1000

$69
12PC HOLLOW PUNCH SET
$18 1’’ DR FLEX HEAD
• 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, • 800mm • Made From CR-MO KC800
5/8 & 3/4” 08050

Great Value!

$27.90 $45 $111

30PC HEX KEY SET, METRIC & AF 6PC COLD CHISEL SET
• Short Series Metric: 0.7, 0.9, 1.3, 1.5, 2, 2.5, 3, 4, 4.5, • 10, 12, 16, 19, 22 & 25mm A7250 10PC SNAP RING CIRCLIP PLIER SET
5, 5.5, 6, 7, 8 & 10mm • Long Series AF: .028, .035, • 4 Bent Tips: 5.5 x 1, 5.5 x 1.2, 7.5 x 1.8 & 8.5’’ x 2.3mm
.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, Tip • 4 Straight Tips: 6 x 1, 6 x 1.2, 8 x 1.8 & 9’’ x 2.3mm
1/4, 5/16 & 3/8” A13060 Tip • 5’’ Hook Tool • 5’’ Pick Tool 10629

Visit us online for more information about KC TOOLS : www.kctools.com.au 5

 Get more for your $$$

$27.50
Soldering Iron
$55.90 $7.90
TYRE INFLATOR & DEFLATOR TYRE GAUGE
• 100W • 10mm Tip • Lead Length - 1.42m 08429
• Quad Scale • 0 - 220 PSI • 0 - 15 Kg/cm² • Dual Scale • 0 - 65 PSI • 0 - 4.5 Kg/cm² 08572
• 0 - 15 Bar • 0 -1500 KPa 08576

FROM
$16
SOLDERING IRONS:
• 08425; 30W • 4mm Tip • Lead Length - 1.42m $11.50 $5.90
$16 BEARING PACKER MINI TUBE CUTTER
• 08427; 60 Watt • 6mm Tip • Lead Length - 1.42m • Maximum OD - 127mm/5-5/16” • Maximum ID • Range - 3 - 16mm • For Copper and Light Alloy
$19.50 - 10mm/25/64” • Maximum Height Between Cones - Pipes 08328
50mm/2” • Operated By Air Or Hand Powered Grease
Gun 08200

$6.90
NEEDLE PROBE CIRCUIT TESTER
• 12V • 108mm • 70g • Lead Length - 900mm • Brass
10427 $20.50 $21
OIL FILTER REMOVER OIL FILTER REMOVER
• 65 - 110mm • Bolt Diameter - 21mm • 1/2” DR • 45 - 75mm • Bolt Diameter - 21mm • 1/2” DR
• Weight - 566g • Medium to Large Type10422 • Weight - 600g • Small to Medium Type 10421

FROM
WIRE BRUSH
$1.50
• 09200; .3mm Crimped Steel, Plastic Handle
$1.50
• 09201; .3mm Crimped Stainless Steel, Plastic Handle
$2.90
• 09202; .3mm Crimped Brass, Plastic Handle
$3.00
FROM FROM
$40.50 $32.90
$42 BEARING SEPARATORS:
• 10706; Cap. - 30 - 50mm, Bolt Diameter - 3/8” x 24T x
120mm, Thread Sizes - 3/8” x 16TPI $40.50
3 LEG PULLERS:
• 10780; 75mm, Cap. - 2T, Bolt Dia. - 14mm, 565g
$32.90
• 10707; Cap. - 50 - 75mm, Bolt Diameter - 1/2” x 20T x • 10782; 100mm, Cap. - 5T, Bolt Dia. - 17mm, 1000g
ENGINE CYLINDER HONE
135mm, Thread Sizes - 3/8” x 16TPI $53.90 $39.90
• 3 Legs • 50 - 175mm • Length - 300mm • Supplied
• 10708; Cap.- 90 - 105mm, Bolt Diameter - 5/8” x 18T x • 10784; 150mm, Cap. - 7T, Bolt Dia. - 20mm, 2700g
With Medium Stone Set 10418
$65.90
165mm, Thread Sizes - 12mm x 1.75 Pitch $80.50
• 10786; 200mm, Cap. - 12T, Bolt Dia. - 23mm, 5300g
• 10709; Cap. - 105 - 150mm, Bolt Diameter - 3/4” x 16T
$144.50
x 260mm, Thread Sizes - 5/8” x 11TPI $182
• 10789; 300mm, Cap. - 18T, Bolt Dia. - 32mm, 10500g
$362

$193.90 FROM $42.90 $317.50

BEARING SEPARATOR 36PC LETTER & NUMBER PUNCH SETS: Compression Tester
• Capacity - 90 - 150mm • Reach - 185 - 435mm • Sets Include ‘&’ • For Both Direct and Indirect Diesel Engine Cars
• Ideal For Removing Bearings, Gears, Collars etc. • 10070; Range: 5mm, Weight: 1800g $42.90 • Length - 580mm • Scale - 0 - 70 Bar & 0 - 1000 Lb/In2
10705 • 10071; Range: 6mm, Weight: 1820g $63.90 • 5 Glow Plug Adaptor 52, 72, 73.5, 114.5 & 119mm
• 3 Dummy Injectors 64, 78 & 114mm 08128

6 Visit us online for more information about KC TOOLS : www.kctools.com.au

with these Great deals
$73.50 FROM $53.50 $54.90
SQUAT BOTTLE JACK BOTTLE JACKS: CREEPER
• Capacity - 12,000kg BJ6000 • Capacity - 6,000kg • Round
• Adjusting Height - 70mm • Min Height - 216mm • Adjustable Seat
• Minimum Height - 191mm • Lifting Height - 343mm • 5 Casters
• Lifting Height - 296mm • Adjustable Height - 80mm • Tool Storage
• Weight - 7kg SQBJ12000 • 5kg $53.50 Area Underneath Seat
BJ8000 • Capacity - 8,000kg 10829
• Min Height - 240mm
• Lifting Height - 400mm
• Adjustable Height - 80mm
• 6kg $63.90

$117.50 $104.50 $390

AXLE STAND TROLLEY JACK TRANSMISSION JACK

• Capacity - 4,000kg • Minimum Height - 390mm • Capacity - 1,500kg • Minimum Height - 130mm • Floor Type • Capacity - 500kg • Minimum Height -
• Maximum Height - 608mm • Weight - 14kg JS4000 • Maximum Height - 390mm • Weight - 17kg TJ1550 220mm • Maximum Height - 575mm • Weight - 35.5kg
TJF01

FROM $120.90 $340 $468.90

STEEL VICE: PIPE BENDER PORTA POWER

• Swivel Base • Capacity - 12T • Ram Stroke - 150mm • Shoe Sizes - • Capacity - 10 Tonne • Min. Ram Height - 460mm
• 08680; 4” $120.90 • 08682; 6” $192.50 15 - 50mm • Bending Dies - 1/2, 3/4, 1, 1-1/4 & 1-1/2” • Ram Lifting Height - 150mm • 51kg C057
• 08684; 8” $242.50 • 08686; 10” $350.90 • Weight - 39kg • Works in Both Vertical and Horizontal
Positions • Minimum 3mm Pipe Thickness PB01

$36.90 $1793.50
GREASE GUN
• Capacity - 500cc • Lever Type
• Takes a Standard 16oz Cartridge
• Pressure or Bulk Fill 10485

$215.50 $625

TOOL TROLLEY FOLDING ENGINE CRANE SHOP PRESS

• 1 Drawer • 2 Trays • 737 x 383 x 785mm • Capacity - 1,200kg • Lifting Range - 25 - 2,000mm • Capacity - 40 Tonne • Stroke - 180mm Heavy Duty
• Lockable Casters TT03 • Overall Size - 1,700 x 1,040 x 1,486mm • Working Area - 600 x 325mm • Bed Width - 655mm
• Weight - 103kg • Telescopic Boom Arm With 4 Lifting • Weight - 216kg • Hydraulic & Pneumatic
Points • Heavy Duty Casters EC1200 • Air Pressure - 120 - 200 PSI SP40

Visit us online for more information about KC TOOLS : www.kctools.com.au 7

 Great Quality Products
15PC HIGH DENSITY FOAM INSERT TRAY
• Includes:
• 55, 65, 80 & 100ft Lbs 1/2” DR Torsion Bars
$823 $246.90ea
• 1/2” DR Impact Universal Joint
• 75, 125 & 250mm 1/2” DR Impact Extension Bars
• 100mm Air Duster
• 1/4” Die Grinder
• Disc Sander
• 3/8” Reversible Drill
• 1/2” DR Ratchet Wrench
• 1/2” DR Impact Wrench
• Tyre Inflator/Deflator 80195

FROM $84.50
$33.90

14PC 1/2” DR CROWSFOOT IMPACT

SPANNER SETS:
3/4” DR IMPACT EXTENSION BAR: • 11318; AF: 1-1/16, 1-1/8, 1-3/16, 1-1/4,
• 11676;150mm, 789g, Torque Rating - 1413Nm 1-5/16, 1-3/8, 1-7/16, 1-1/2, 1-5/8, 1-11/16,
$33.90 1-3/4, 1-13/16, 1-7/8 & 2”
12PC 3/8 & 1/2” DR CROWSFOOT IMPACT SPANNER
• 11679; 250mm,1350g, Torque Rating - 1413Nm • 11317; METRIC: 27, 29, 30, 32, 33, 34, 35,
SET, AF • 3/8” DR: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16
36, 38, 41, 43, 46, 48 & 50mm
$43.50 & 3/4” • 1/2” DR: 13/16, 7/8, 15/16 & 1” 11220

2 YEAR $13.50 $50.90

AIR DUSTER

WARRANTY • Air Inlet Thread (NPT) - 1/4”

• Extra Longnose • Length - 500mm
• Weight - .3kg SG1072XL
ENGINE CLEANING GUN
• Cup Capacity - .7L • Fluid Tip
Size (I.D.) - 1.8mm

on All $306.90
• 50 - 70 PSI • Fluid Inlet - 3/8”
• Height - 216mm
• Weight - .7kg • Can be Used
With a Variety of Solvents or

AIR TOOLS Cleaners SG1057

2
WO
YEA NEEDLE SCALER
• 19 Needles • 4,000 RPM • 90 PSI • 90.3 dBA
R
T

KCTOOLS • Length - 410mm • Weight - 2.6kg SG0315NS

Y

AR
W

RANT

$111.90 $201.90 $89

3/8” REVERSIBLE DRILL 3/8” REVERSIBLE DRILL 1/4” DIE GRINDER KIT
• 1,800 RPM • Spindle Thread - 3/8” - 24 • 85 dBA • 1,600 RPM • Spindle Thread - 3/8” - 24 • 86 dBA • Collet Size - 6mm • 22,000 RPM • 93 dBA
• Length - 163mm • Weight - 1.4kg SM705 • Length - 178mm • Weight - 1.2kg SM7955 • Includes: Die Grinder, 2 x 1/4 & 1/8” Collets &
10 Mounted Points SM513

$137.50 $619 $265

3/8” DR MINI RATCHET 3/4” DR IMPACT WRENCH 1/2” DR IMPACT WRENCH
• Torque - 30 Ft Lb • 260 RPM • 85 dBA • Length - • Torque - 750 Ft Lb • 6,500 RPM • Bolt Capacity - 1” • Ultimate Torque - 600 Ft Lb • Working Torque Range -
133mm • Weight - .4kg • Wobble Anvil SM041 • 103 dBA • Length - 225mm • Weight - 4.6kg SG0752 50 - 460 Ft Lb • 7,000 RPM • 88 dBA • Length - 204mm
• Weight - 2.2kg SM030

8 Visit us online for more information about KC TOOLS : www.kctools.com.au

at jaw dropping Prices!

$157.50ea 20PC 1/2” DR STANDARD & DEEP

IMPACT SOCKET SET:
11321; Metric:
Big Impact
• Standard: 10, 12, 13, 14, 15, 16, 17, 19, 21 & 22mm
• Deep: 10, 12, 13, 14, 16, 17, 19, 21, 22 & 24mm
11320; AF:
• Standard: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16,
7/8 & 15/16”
On Your
• Deep: 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8,
15/16 & 1”
Savings
$225.90ea

9PC 1” DR IMPACT SOCKET SETS: 7PC 3/4” DR IN-HEX IMPACT SOCKET SETS: 7PC 3/4” DR DEEP IMPACT SOCKET SETS:
• 11801; Metric: 24, 27, 30, 32, 36, 38, 41, 46 & • 116540; Metric: 19, 21, 22, 24, 27, 30 & 32mm • 11705; Metric: 26, 27, 29, 32, 35, 36 & 38mm
50mm $322.50 $232.90 • 11704; AF: 1, 1-1/16, 1-1/8, 1-1/4, 1-3/8,
• 11800; AF: 1, 1-1/8, 1-1/4, 1-5/16, 1-1/2, 1-5/8, 1-3/4, • 116521; AF: 3/4, 7/8, 15/16, 1, 1-1/16, 1-3/16 & 1-1/4” 1-7/16 & 1-1/2”
1-7/8 & 2” $328.90 $236.50

$172 $209 $230.90

AIR RIVITER SCREWDRIVER SANDER
• Stroke Length - 9/16” • Blind Rivit Capacity - 3/16” • Hex Drive Capacity - 1/4” • 800 RPM • 88 dBA • Palm • Pad Size - 6” • 11,000 RPM • 76 dBA
• 90 PSI • 76 dBA • Length - 156mm • Weight - 2kg • Length - 190mm • Weight - 1.3kg SM025 • Spindle Thread - 5/16” - 24 • Length - 163mm
SG0810 • Weight - .8kg SM095

$74.90 $192 $533

7PC AIR HAMMER KIT ANGLE GRINDER ANGLE GRINDER
• 101 dBA • 3.3kg • Includes: 1 x Air Hammer, • Pad Size - 100mm • 11,000 RPM • 89 dBA • 90 PSI • Disc Size - 7” • 7,000 RPM • 87 dBA • 90 PSI
5 x Chisels & 1 x Oiler SG0204PSR • Length - 225mm • Weight - 1.9kg SG0519 • Length - 350mm • Weight - 3.5kg SM010

$342 $872 $872

1/2” DR IMPACT WRENCH 3/4” DR IMPACT WRENCH 1” DR IMPACT WRENCH
• Torque - 500 Ft Lb • 7,000 RPM • Bolt Capacity - 5/8” • Ultimate Torque - 1,400 Ft Lb • 5,500 RPM • 90 dBA • Torque - 1,200 Ft Lb • 4,000 RPM
• 75 dBA • Length - 245mm • Weight - 2.8kg SG0718I • Length - 215mm • Weight - 3.4kg SM454 • Bolt Capacity - 1-1/4” • 82 dBA • Length - 355mm
• Weight - 10.2kg SG0708S

Visit us online for more information about KC TOOLS : www.kctools.com.au 9

 Kc PRo-AM Save BIG on our Toolkits

$1299 $799
105TK 103TK
244PC TOOLKIT, METRIC & AF 196PC Toolkit, Metric & AF
• 6 Drawer Toolchest & 3 Drawer Add-On • 6 Drawer Toolchest
& 6 Drawer Roll Away • HDFI Trays
• 1/4, 3/8, 1/2’’ DR Sockets & Accessories • Adjustable Wrenches
• 13PC Screwdriver Set • Hex Key Set
• 6PC Precision Screwdriver Set • Punch & Chisel Set
• Spanner Set • Various Pliers
• 8PC Hook & Pick Set • Multigrips
• Adjustable Wrenches • Spanner Set
• Combination, L/Nose, Diag. Cutting • 1/4, 3/8 & 1/2” DR Sockets
• Multigrips & Locking Pliers & Accessories
• 40PC Bit Set • Circuit Tester
• Ball Pein Hammer • Torch
• 8m Dual Scale Tape Measure • Blow Gun
• Trimming Knife + Blades (Pack Of 10) • Hook & Pick Set
• 19PC Drill Bit Set • Knife + Blades
• Pro Hacksaw (Pack Of 10)
• 25PC Hex Key Set • 5m Tape Measure
• 7PC Punch & Chisel Set • Ball Pein Hammer
• Feeler Gauge • Screwdriver Sets
• Hacksaw

Super
Saver!!!
152PC Toolkit,
Metric & AF
150 TK
152PC TOOLKIT, METRIC & AF
• 4 Drawer Ute Box
• 1/2 & 3/4’’ Dr Skts & Accessories
• 13PC Screwdriver Set
• 24PC Combination Spanner Set
• Adjustable Wrenches
• 28PC Bit Set

$70.90 $21.50
• Combination Pliers
• Long Nose Pliers
• Diagonal Cutting Pliers
• Multigrips
40PC 3/8 & 1/2” DR BIT SET, HEX STAR & • Locking Pliers
13PC SCREWDRIVER SET, BLADE & PHILLIPS
SPLINE • Ball Pein Hammer
• Blade: 8 x 200, 8 x 150, 6 x 150, 6 x 100, 5 x 150,
• 3/8” DR: 4, 5, 6, 7, 8, 10 & 12mm, T20, 25, 30, 40, • Tape Measure
5 x 100, 6 x 38 & 3 x 75mm • Phillips: No.3 x 150,
45, 50 & 55, M5, 6, 8, 10 & 12 • 1/2” DR: 4, 5, 6, 7, • Pipe Wrench
2 x 100, 0 x 75, 2 x 38 & 1 x 75mm SD13
8, 10 & 12mm, T20, 25, 30, 40, 45, 50 & 55, M5, 6, • Club Hammer
8, 10 & 12 10640 • Fencing Pliers
• Pry Bar
• Punch & Chisel Set
• Hacksaw

$14.90 $21.90
5PC SCREW EXTRACTOR SET, SPIRAL FLUTE 7PC PUNCH & CHISEL SET
• No. 1 - No. 5 10440 • Centre Punch: 5mm • Punches: 4, 6 & 8mm
• Chisels: 10, 12 & 16mm 19013

$1345
FROM $23.50 FROM $10
ADJUSTABLE WRENCHES: ADJUSTABLE WRENCHES:
• Semi-Polished Finish • CR-V
• 15584; 375mm $23.50 • 10576; 150mm, 150g $10.00
• 15586; 450mm $41.90 • 10578; 200mm, 250g $12.50
• 15588; 600mm $67.90 • 10580; 250mm, 450g $16.50
• 10582; 300mm, 730g $22.00

10 Visit us online for more information about KC TOOLS : www.kctools.com.au

& Other Accessories!!! Kc PRo-AM

7 Drawer Rollaway

Great
$498.50 Deal!
7 DRAWER ROLLAWAY
• 670 x 460 x 810mm • Fully Lockable • Ball Bearing
Slides 10056

$199
6 Drawer Toolbox
• 660 x 308 x 380 • Fully Lockable
•Ball Bearing Slides 10052

$148 $70.90ea
41PC 1/2” DR SOCKET SET, METRIC & AF 12PC COMBINATION SPANNER SETS: 3PC WOBBLE BAR SETS:
• Metric: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, • 10504; Metric: 6, 8, 10, 11, 12, 13, 14, 16, 17, 18, • 10170; 3/8” DR, 75, 150 & 200mm, Allows 15° Angle $20.90
22, 23, 24, 27, 30 & 32mm 19 & 21mm • CR-V • 10175; 1/2” DR, 75, 150 & 200mm, Allows 15° Angle $27.90
• AF: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, • 10502; AF: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16,
15/16, 1, 1-1/16, 1-1/8, 1-3/16 & 1-1/4” 3/4, 13/16, 7/8 & 15/16” • CR-V
• Ratchet • Speed Brace • 125 & 250mm Extensions
• Universal Joint • 5/8 & 13/16” Spark Plug Sockets
• Sliding T Bar 10120

$44.50ea $189
3PC FLARE NUT SPANNER SETS: 6PC OPEN END SPANNER SETS: 8PC COMBINATION SPANNER SET, AF
• 19801; AF: 3/8 x 7/16, 1/2 x 9/16 & 5/8 x 11/16” • 10230; Metric: 8 x 9, 10 x 11, 12 x 13, 14 x 15, • 1, 1-1/16, 1-1/8, 1-1/4, 1-5/16, 1-3/8, 1-7/16 & 1-1/2”
$12.90 16 x 17 & 18 x 19mm 19828
• 19802; Metric: 10 x 12, 13 x 14 & 15 x 17mm • 10220; AF: 1/4 x 5/16, 3/8 x 7/16, 1/2 x 9/16,
$15 9/16 x 5/8, 5/8 x 11/16 & 11/16 x 3/4”

Visit us online for more information about KC TOOLS : www.kctools.com.au 11

 Don,’’ t Miss Out on
Great Savings!!!

PROFESSIONAL HACKSAW
$25 4PC HOOK & PICK SET
$12 PODGER BAR
$29
• 300mm 12262 • Straight, 90°, Hook & Combination Tips • Tips Made • Curved Chisel End and Tapered Aligner • Hardened and
From CR-V 16390 Tempered for Increased Durability • 615mm • 1,210g
07119

$29 From $15 From $18.50

DEAD BLOW HAMMER BALL PEIN HAMMERS: PIPE WRENCHES:
• 795g • 320mm • Steel Shaft • Handle Covered With • Hickory Handle • Rigid Pattern
Rubber 15044 • 14090; 225g, 300mm $15 • 15130; 350mm, 1,600g, Max Jaw Opening - 60mm $18.50
• 15132; 450mm, 2,400g, Max Jaw Opening - 76mm $24.50
• 14091; 350g, 300mm $17
• 15134; 600mm, 4,300g, Max Jaw Opening - 90mm $39.90
• 14092; 450g, 350mm $20
• 15136; 900mm, 8,750g, Max Jaw Opening - 115mm $80.00
• 14093; 650g, 400mm $26.90 • 15138; 1,200mm, 14,500g, Max Jaw Opening - 166mm $120.90
• 14094; 900g, 400mm $28.90
• 14095; 1300g, 410mm $35.50

$43.50 $57 $35

5PC FILE SET 8PC ANTI-SLIP SCREWDRIVER SET, T-PROOF 7PC ANTI-SLIP SCREWDRIVER SET, BLADE & PHILLIPS
• 8” Round, 8” Half Round, 8” Bastard, 6 & 10” Mill • TH8x60, TH10x80, TH15x80, TH20x100, TH25x100, • 5 Blade: 3.0x75, 4.0x100, 5.5x125, 6.5x150 & 8.0x150mm
A15002 TH27x115, TH30x115 & TH40x130mm 16306 • 2 Phillips: No.1x80 & No.2x100mm 16300

$100
60PC TAP & DIE SET, UNC, UNF, METRIC & NPT
• UNC: No.4x40 - 12x24, 1/4x20 - 1/2”x13TPI
• UNF: No.10x32, 1/4x28 - 1/2”x20TPI
$41.50
• Metric: 3x.5 - 12mmx1.75mm
• NPT: 1/8”x27TPI
• Bar Type Tap Wrench 1/2" Capacity
• T Type Tap Wrench 1/4" Capacity
• 1" OD Die Holder
• 2 Screw Pitch Gauges • Screwdriver 12009

$106
60PC TAP & DIE SET, UNC, UNF, METRIC & NPT
• UNC: No.4x40 - 12x24, 1/4x20 - 1/2”x13TPI
• UNF: No.10x32, 1/4x28 - 1/2”x20TPI
• Metric: 3x.5 - 12mmx1.75mm
• NPT: 1/8”x27TPI 14PC IMPACT DRIVER KIT
• Bar Type Tap Wrench 1/2” Capacity • 5 Blade: 5, 6, 8, 10 & 12mm
• T Type Tap Wrench 1/4” Capacity • 4 Hex: 4, 5, 6 & 8mm
• 1” OD Die Holder • Hex Dies • 4 Phillips: No.1, 2, 3 & 4
• 2 Screw Pitch Gauges • Screwdriver 12008 10290

$185
110PC TAP & DIE SET, UNC, UNF, UNS, METRIC & NPT
• UNC: No.4x40 - 12x24TPI, 1/4x20 - 3/4”x10TPI
• UNF: No.10x32, 1/4x28 - 3/4”x16TPI
• UNS: 1/4x24 & 1/4” x 40TPI
• Metric: 6x1 - 18mmx1.5mm
• NPT: 1/8x27 & 1/4”x18TPI
• 2 Bar Type Wrenches: M3-M12 / 1/8-1/2” & M6-M30 /
1/4 - 3/4” Capacity
• T Type Tap Wrench: 6mm / 1/4” Capacity & 2 Die
Handles: 25mm / 1” & 38mm / 1-1/2” OD
• All Taps Have a Starter and Finisher Size PT52

Best Value!
EFFECTIVE UNTIL June 30TH 2011 OR UNTIL STOCKS RUN OUT. ERRORS AND OMISSIONS EXCEPTED. ALL PRICES INCLUDE GST.
PRODUCTS MAY VARY SLIGHTLY FROM PICTURES SHOWN. AVAILABLE IN QLD, NSW, VIC, SA, NT, ACT & TAS ONLY.