Scribd
Upload
7K views4 pages

Tata LPT 909 Specifications

This document provides specifications for a TATA 497 NA truck including details about the engine, clutch, gear box, rear axle, front axle, steering, brakes, frame, suspension, wheels and tyres, fuel tank, electrical system, performance, dimensions, load body, weights, warranty and safety cautions. The truck has a 4 cylinder diesel engine producing 90PS, 5-speed manual transmission, leaf spring suspension, and is designed to carry a maximum gross vehicle weight of 9,000 kg.

Uploaded by

Abhi Shek
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
7K views4 pages

Tata LPT 909 Specifications

This document provides specifications for a TATA 497 NA truck including details about the engine, clutch, gear box, rear axle, front axle, steering, brakes, frame, suspension, wheels and tyres, fuel tank, electrical system, performance, dimensions, load body, weights, warranty and safety cautions. The truck has a 4 cylinder diesel engine producing 90PS, 5-speed manual transmission, leaf spring suspension, and is designed to carry a maximum gross vehicle weight of 9,000 kg.

Uploaded by

Abhi Shek
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

 

SPECIFICATIONS

ENGINE

Model TATA 497 NA


Type 4 Cylinder in line water
cooled, direct injection
diesel engine.
Bore / Stroke 97 mm / 128 mm
Capacity 3784 cc
Max. Engine Output 90 PS (66.2 kw) at 2800
rpm as per DIN 70020
Max. Torque 26 mkg. (255 Nm) at 1800
rpm
Compression Ratio 17 : 1
Firing Order 1-3-4-2
Air Filter Oil bath, remote mounted
Oil Filter Full flow paper type
Fuel Filter Two stage pre & fine
filteration
Fuel Injection Pump Inline type MICO
Timer With automatic advance
Governor Centrifugal type variable
speed
Capacity of Cooling system 17 litres
Crankcase Oil Capacity Max. 9 litres, Min. 7 litres
Weight of Engine 370 kg (Dry)
Radiator Frontal Area 2413 sq. cm.

CLUTCH

Type Single plate dry friction type


Outside diameter of 280 mm
clutch lining
Friction Area 798 sq. cm. (approximately)

GEAR BOX

Model GBS-27
Type Synchromesh
No of gears 5 Forward and 1 Reverse
Gear Ratios 1st - 7.36 4th - 1.58
2nd - 4.38 5th - 1.00
3rd - 2.48 Reverse - 6.67

REAR AXLE

Type Single speed fully floating


spiral bevel gears
Ratio 5.857 : 1 (41/7)

FRONT AXLE

Front Axle Heavy Duty, Forged I beam,


Reverse Elliot Type

STEERING

Steering Heavy Duty recirculating


ball type
Ratio 34.2 : 1

BRAKES

Service brakes Dual air over hydraulic


system.
Brake Drum Diameter 408 mm.
Lining Area Front -1410 sq.cm
Rear -1410 sq.cm.
Total -2820 sq.cm
Parking Brake Hand Operated.
Type Spring actuated parking
brake acting on rear wheels
Engine Exhaust Brake Air operated coupled with
service brake with electro-
magnetic air cylinder and
electrical isolator switch.

FRAME

Frame Ladder type heavy duty


frame with rivetted / bolted
cross members.Side
members are of channel
section.
Depth - 219 mm
(max.)
Width - 58 mm.

SUSPENSION

Type Semi elliptical leaf spring at


front and rear.
Spring Span Front - 1450 mm.
Rear - 1600 mm.
Leaf Width Front - 70 mm.
Rear - 80 mm.
Shock Absorbers Hyraulic double acting
telescopic type for front
axles only.

WHEELS & TYRES

7.50 x 20 - 12 PR Diagonal
Tyres
Ply
Wheel Rims 6.00 x 20
No. of Wheels Front - 2, Rear -4, Spare -1

FUEL TANK

Capacity 90 litres.

CAB All steel full-forward control


driver's cab with tilting
arrangement and with
torsion bar assistance.

ELECTRICAL SYSTEM

System Voltage 12 Volts


Alternator Capacity 35 Amps.
Battery Capacity 12 V, 120 Ah

PERFORMANCE

Max. geared speed in top


81 kmph
gear with std. rear axle
Max. climbing ability inn 1st
gear (with Std. gear box 23.5 %
and rear axle)
Minimum turning cicle dia.
14150
in mm - as per IS : 9435
Minimum turning clearance 15550
circle dia. in mm as per IS :
9435

MAIN CHASSIS DIMENSIONS AS PER IS 9435 in mm

Wheelbase 3600
Track Front 1800
Track Rear 1690
Overall Length 6435
Max. Width 2159
Front overhang 1275

LOAD BODY

Overall length of laod body


4805
in mm
Loading platform area 9.7 sq.m.
Width 2155 mm (over all)

WEIGHTS (kg.)

Complete chassis kerb 3700


weight with cab and
loadbody (with sparfe
wheels and tools) as per IS
9211
Max. Permissible F.A.W. 3000
Max. Permissible R.A.W. 6000
Max. G.V. W. 9000

WARRANTY : Warranty details

CAUTION : Do not weld or drill on chasis frame

You might also like