Practical Examination Subject: Geometric Modeling Time: 2.00 Hrs Marks: 50 Class: S.E.
(Mechanical) Examination Seat No: _______________________________________________________________________ Instructions: 1. Using suitable geometric modeling software solve the questions. 2. Take printout for question number 1 & 2. 3. Submit attached (a) Question paper (b) printout pages to the supervisor. 4. Write Examination seat number in printout page as well _______________________________________________________________________
Q 1 Create the model as per the dimensions given in following figure 1
30 marks
Figure 1 OR
Practical Examination Subject: Geometric Modeling Time: 2.00 Hrs Marks: 50 Class: S.E. (Mechanical) Examination Seat No: _______________________________________________________________________ Instructions: 1 Using suitable geometric modeling software solve the questions. 2 Take printout for question number 1 & 2. 3 Submit attached (a) Question paper (b) printout pages to the supervisor. 4 Write Examination seat number in printout page as well _______________________________________________________________________ Q1 Create the model as per the dimensions given in following figure 1. 30 marks
Figure 1 OR
Practical Examination Subject: Geometric Modeling Time: 2.00 Hrs Marks: 50 Class: S.E. (Mechanical) Examination Seat No: _______________________________________________________________________ Instructions: 1 Using suitable geometric modeling software solve the questions. 2 Take printout for question number 1 & 2. 3 Submit attached (a) Question paper (b) printout pages to the supervisor. 4 Write Examination seat number in printout page as well Q1 Create the model as per the dimensions given in following figure 1. 30 marks
Figure 1
OR
Practical Examination Subject: Geometric Modeling Time: 2.00 Hrs Marks: 50 Class: S.E. (Mechanical) Examination Seat No: _______________________________________________________________________ Instructions: 5 Using suitable geometric modeling software solve the questions. 6 Take printout for question number 1 & 2. 7 Submit attached (a) Question paper (b) printout pages to the supervisor. 8 Write Examination seat number in printout page as well _______________________________________________________________________ Q1 Create the model as per the dimensions given in following figure 1. 30 marks
Figure 1 OR
Practical Examination Subject: Geometric Modeling Time: 2.00 Hrs Marks: 50 Class: S.E. (Mechanical) Examination Seat No: _______________________________________________________________________ Instructions: 9 Using suitable geometric modeling software solve the questions. 10 Take printout for question number 1 & 2. 11 Submit attached (a) Question paper (b) printout pages to the supervisor. 12 Write Examination seat number in printout page as well _______________________________________________________________________ Q1 Create the model as per the dimensions given in following figure 1. 30 marks
Figure 1
OR
Practical Examination Subject: Geometric Modeling Time: 2.00 Hrs Marks: 50 Class: S.E. (Mechanical) Examination Seat No: _______________________________________________________________________ Instructions: 13 Using suitable geometric modeling software solve the questions. 14 Take printout for question number 1 & 2. 15 Submit attached (a) Question paper (b) printout pages to the supervisor. 16 Write Examination seat number in printout page as well _______________________________________________________________________ Q1 Create the model as per the dimensions given in following figure 1. 30 marks
Figure 1
OR
Q 1 Create the model as per the dimensions given in following figure 2.
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Figure 3
Q1 Create the model as per the dimensions given in following figure 2.
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Figure 3
Q1 Create the model as per the dimensions given in following figure 2.
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Figure 3 Q1 Create the model as per the dimensions given in
following figure 2.
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Figure 3
Q1 Create the model as per the dimensions given in following figure 2.
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Figure 3
Q1 Create the model as per the dimensions given in following figure 2.
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Figure 3
Q1 Create the model as per the dimensions given in following figure 2.
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Figure 3
Q1 Create the model as per the dimensions given in following figure 2.
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Figure 3
Q1 Create the model as per the dimensions given in following figure 2.
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Figure 3
Q1 Create the model as per the dimensions given in following figure 2.
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Figure 3
Q1 Create the model as per the dimensions given in following figure 2.
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Figure 3
Q1 Create the model as per the dimensions given in following figure 2.
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Figure 3
Q1 Create the model as per the dimensions given in following figure 2.
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Figure 3
Q1 Create the model as per the dimensions given in following figure 2.
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Figure 3
Q1 Create the model as per the dimensions given in following figure 2.
30 marks
Figure 2 Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Figure 3
Q1 Create the model as per the dimensions given in following figure 2.
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Figure 3
Q1 Create the model as per the dimensions given in following figure 2.
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Figure 3
Q1 Create the model as per the dimensions given in following figure 2.
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Figure 3
Q1 Create the model as per the dimensions given in following figure 2.
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Figure 3
Q1 Create the model as per the dimensions given in following figure 2.
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Figure 3
Q1 Create the model as per the dimensions given in following figure 2.
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Figure 3
Q1 Create the model as per the dimensions given in following figure 2.
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Figure 3
Q1 Create the model as per the dimensions given in following figure 2.
30 marks
Figure 2 Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Figure 3
Q1 Create the model as per the dimensions given in following figure 2.
30 marks
Figure 2 Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Figure 3
Q1 Create the model as per the dimensions given in following figure 2.
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Figure 3
Q1 Create the model as per the dimensions given in following figure 2.
30 marks
Figure 2 Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Figure 3
Q1 Create the model as per the dimensions given in following figure 2.
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Figure 3
Q1 Create the model as per the dimensions given in following figure 2.
30 marks
Figure 2 Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Figure 3
Q1 Create the model as per the dimensions given in following figure 2.
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Figure 3
Q1 Create the model as per the dimensions given in following figure 2.
30 marks
Figure 2
Q 2 Create the model as per the dimensions given in following figure 3 and create the assembly using suitable constrains. 20 marks
Figure 3
