Scribd
Upload
51 views3 pages

BB Recover Tool

The document provides instructions for reinstalling the operating system on a BlackBerry device using the Application Loader tool: 1. Open the Command Prompt and navigate to the Application Loader directory. 2. Make sure Desktop Manager is not running before connecting the BlackBerry device. 3. Run the loader.exe command to launch the Application Loader Wizard. 4. Select the correct USB port in the dropdown menu to connect to the device. If it is not detected, disconnect and reconnect the battery while the LED is on. 5. The loader should now connect to the device and allow reinstalling the OS.

Uploaded by

Saif Khan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
51 views3 pages

BB Recover Tool

The document provides instructions for reinstalling the operating system on a BlackBerry device using the Application Loader tool: 1. Open the Command Prompt and navigate to the Application Loader directory. 2. Make sure Desktop Manager is not running before connecting the BlackBerry device. 3. Run the loader.exe command to launch the Application Loader Wizard. 4. Select the correct USB port in the dropdown menu to connect to the device. If it is not detected, disconnect and reconnect the battery while the LED is on. 5. The loader should now connect to the device and allow reinstalling the OS.

Uploaded by

Saif Khan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

1.

Start a Command Prompt in DOS from the PC (Start >> All Programs >> Accessories >> Command Prompt) 2. Change the directory to: C:\Program Files\Common Files\Research In Motion\AppLoader If you do not know how to navigate to this directory follow instructions in 2a) 2a)

From C:\ prompt type:

cd \Program Files <hit enter> cd Common Files <hit enter> cd Research In Motion <hit enter> cd AppLoader <hit enter> 3. Make sure Desktop Manager is not running 4. Connect BlackBerry to the PC 5. Enter the following command in the Command Prompt window: loader.exe /nojvm

Installation
1. The Application Loader Wizard window will open 2. Click on Next 3. You will get a drop down list with the COM ports and one USB port entry 4. Select the one which says USB:UNKNOWN If you do not see USB:UNKNOWN or USB:BBPIN, then follow instructions listed in a1-a5: a1) Disconnect the device from the PC.

a2) Keep the Application Loader Wizard window open

a3) Remove the battery and put it back

a4) While the red led is on, reconnect the device to the PC. The led will only stay on for a few seconds

a5) When USB:UNKNOWN appears in the drop down list, you need to immediately select Next

5. The loader should now connect to your device and you will be able to reinstall the OS Thanks to acnst @ BlackBerry Forums

Views Page Discussion View source History

Personal tools Log in / create account

Navigation: Home Community portal Current events Recent changes

Permanent Links: Search BlackBerryForums BlackBerryFAQ

Go

Search

Toolbox What links here Related changes Special pages Printable version

You might also like