Scribd
Upload
91 views2 pages

Perla Wall Design

This document provides design data and calculations for an RCC wall. It includes specifications like grade of concrete as 20 N/sqmm, grade of steel as 415 N/sqmm, permissible stresses, densities of materials, design coefficients, height of water retained as 8m. The model wall is analyzed using STADD PRO software. It is found that the maximum moment along the Mx direction is 178 Kn-m and along My direction is 116 Kn-m. Based on the calculations, the required depth is 749 mm, provided depth is 800 mm, area of reinforcement required is 2346.74 sqmm which can be achieved using 20mm diameter bars spaced at 130mm c/c.

Uploaded by

Mohan Kumar
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
91 views2 pages

Perla Wall Design

This document provides design data and calculations for an RCC wall. It includes specifications like grade of concrete as 20 N/sqmm, grade of steel as 415 N/sqmm, permissible stresses, densities of materials, design coefficients, height of water retained as 8m. The model wall is analyzed using STADD PRO software. It is found that the maximum moment along the Mx direction is 178 Kn-m and along My direction is 116 Kn-m. Based on the calculations, the required depth is 749 mm, provided depth is 800 mm, area of reinforcement required is 2346.74 sqmm which can be achieved using 20mm diameter bars spaced at 130mm c/c.

Uploaded by

Mohan Kumar
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

DESGN OF RCC WALL

DESIGN DATA
GRADE OF CONCRETE 20 N/SQMM
GRADE OF STEEL 415 N/SQMM
PERMSSBLE STRESS
0.37,1. FOR UNCRACKED 1.7 N/SQMM (ALLOWABLE TENSLE STRESS ON WATER FACE)
120 N/SQMM (ALLOWABLE STRESS FOR RENFORCEMENT)
25 N/CUM
24 N/CUM
10 N/CUM
DENSTY OF EARTH 18 N/CUM
DESGN COEFFCENTS
55
0.44
0.85
0.318
19 M
0.8 M
HEGHT OF WATER RETANED 8 M
INITE MODEL IS ANALYSED USING STADD PRO SOTWARE
1) MOMENT IN WALL ALONG Mx DIRECTION

2) MOMENT IN WALL ALONG My DIRECTION
MAX MOMENT ALONG Mx DRECTON 178 Kn-m
MAX MOMENT ALONG My DRECTON 116 Kn-m
modular ratio m
.-. =
st =
DENSTY OF RCC
DENSTY OF PCC
DENSTY OF WATER
n
j
Q
HEGHT OF WALL
THCKNESS OF WALL
UN CRACKED CONDITION
DEPTH REQURED d 749 mm
D 809 mm
PROVDED DEPTH = D 800 mm
= d 740 mm
AREA O REINORCEMENT REQUIRED
AREA OF RENFRCEMENT REQURED 2346.74 Sqmm
ADOPT DA OF BAR AS 20 mm
REQURED SPACNG 134 mm C/C
SAY 130 mm C/C
HENCE PROVIDE 20DIA BARS @130mm C/C

You might also like