Scribd
Upload
49 views3 pages

Action To Be Take For RDSO Inspection of New FBW Machine SL - No. Materials Specification Qty Uom Length Remarks Remarks - 1

This document outlines the requirements and materials needed for an RDSO inspection of a new flash butt welding machine. It lists 32 pieces of 60kg rail and 32 pieces of 52kg rail needed to make test pieces. It also lists other required equipment such as a rail cutting machine, grinding machine, band saw, nitric acid, and manuals. The document requests that all the listed items be arranged for the RDSO inspection scheduled for July 1, 2011.

Uploaded by

iyappan051993
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
49 views3 pages

Action To Be Take For RDSO Inspection of New FBW Machine SL - No. Materials Specification Qty Uom Length Remarks Remarks - 1

This document outlines the requirements and materials needed for an RDSO inspection of a new flash butt welding machine. It lists 32 pieces of 60kg rail and 32 pieces of 52kg rail needed to make test pieces. It also lists other required equipment such as a rail cutting machine, grinding machine, band saw, nitric acid, and manuals. The document requests that all the listed items be arranged for the RDSO inspection scheduled for July 1, 2011.

Uploaded by

iyappan051993
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Dear sir,

This is reference to the various discussions over Phone with us please find below the consolidated requirement of RDSO inspection of our New Flash butt welding machine.

Action to be take for RDSO inspection of new FBW machine Sl.No. 1 Materials Rail Pieces Specification 60Kg Rail Section Qty 32 Uom Nos Length Remarks

Rem

750mm Reqd for making 16nos test piece, 1.5 mtr each(10nos for Transverse load test& Hardness Test + 6 nos for Macro test), straightness of cutting end of rail should be as per RDSO FBW manual. 750mm Reqd for making 16nos test piece, 1.5 mtr each(10nos for Transverse load test& Hardness Test + 6 nos for Macro test), straightness of cutting end of rail should be as per RDSO FBW manual. For cutting of rail. For cutting of rail. For grinding of welded rails. For grinding of welded rails.

NB:No. of Test pieces to b RDSO instruction, It is on

Rail Pieces

52Kg Rail Section

32

Nos

3 4 5 6

Rail Cutting Machine Rail Cutting blade Grinding Machine Grinding Wheel 14" (Bipco Make) AG7(Bosch make) 7"(Bosch Make)

2 20 2 25

Nos Nos Nos Nos

Band Shaw Work Shop Fine polish paper Nitric Acid Transverse Load testing and Hard ness testing lab Dia-7",100 grade(approx)

Nos

For slicing of rail (length 100mm) Vertically from rail head for Macro testing. For polishing surface of sliced rail, For Macro test at site. For Macro test at site It may be Arakonam Srly,EWS.

NB: Searching Work Shop

8 9 10

10 2 8

Nos Ltrs nos (for each rail sec) Rmtr.

NB: Clint intimation letter

11 12 13 14 15 16 17 18 19

Cable Lighting Arrangement at Site USFD machine with operator Labour FBW Operator Vehicle Vehicle Diploma Engineer Manual

25sqmm,3core

25

If reqd to work at site,(for mainly rail cutting work after weld) 1 Skilled(Technical) With operator certificate Carriage Van Exicutive Car Plant Engineer OEM 6 1 1 1 1 1 Nos Persons person Nos Nos Person SET For transporting of test pieces to testing lab. Foe movement of RDSO inspector. As written in QAP Should be available at site Rail Cutting and grinding work

Mr.Dipankar Roy is hav

Hope Mr.Sudagar is hav certificate Available with Plant

We request you to arrange all the above for the RDSO inspection at site on

01.07.2011.

You might also like