Scribd
Upload
2K views2 pages

Downgrade Firmware Download: Samsung ML 1640 Counter Reset

There are a few ways to reset the counter on a Samsung ML 1640 printer outlined in the document: 1) Downgrade the firmware by making a connection between pins 1 and 4 using a switch with the printer unplugged. Various firmware downgrade links are provided. 2) If problems occur after installing from the Samsung CD, only install the drivers and not any other software. Hold the online button and power cycle the printer if it stops responding. 3) Refill the original cartridge, make the pin connection with the printer unplugged, start the printer for 10 seconds, remove the connection and power, then power up and the counter should be reset. Uninstall and reinstall the driver as

Uploaded by

Praveen Pratap
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views2 pages

Downgrade Firmware Download: Samsung ML 1640 Counter Reset

There are a few ways to reset the counter on a Samsung ML 1640 printer outlined in the document: 1) Downgrade the firmware by making a connection between pins 1 and 4 using a switch with the printer unplugged. Various firmware downgrade links are provided. 2) If problems occur after installing from the Samsung CD, only install the drivers and not any other software. Hold the online button and power cycle the printer if it stops responding. 3) Refill the original cartridge, make the pin connection with the printer unplugged, start the printer for 10 seconds, remove the connection and power, then power up and the counter should be reset. Uninstall and reinstall the driver as

Uploaded by

Praveen Pratap
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

firmware fix for samsung ml 1640

http://www.fixme.ro/Fix-and-Solutions/samsung-ml-1640-counter-reset/Pr...

Samsung ML 1640 counter reset


Written by Johnny Thursday, 18 November 2010 11:26

Samsung ML 1640 counter reset One solution to reset the counter is to make a downgrade first and then make a connection between pin 1 and 4. Use an switch, for the connection.

Downgrade firmware download


Firmware fix v.83 link Firmware fix v.93 link Firmware fix v.96 link Firmware RAW Samsung Firmware TOOLS

Indicated not to install everything on the samsung cd, only the drivers and block driver or samsung program from firewall to accces internet as they do not automatically upgrade the firmware. If you encounter problems, the printer does not respond, you can try to hold the online button and then power the printer. Should get online and printer light will blink and will be detected by PC, then you can try to downgrade again. - refill the original cartridge came with the printer,if u have another cartridge if you remove fuse. - make that connection, with the printer unplugged - put in the printer cartridge refill - start printer for 10 sec - remove the printer from the outlet and and remove the conector - power up the printer, and all is ok. - uninstall the driver and reinstall it.

1 of 2

23/08/2011 9:27 PM

firmware fix for samsung ml 1640

http://www.fixme.ro/Fix-and-Solutions/samsung-ml-1640-counter-reset/Pr...

Let's Draw! Ubisoft New 18.79 Best 12.91

Zumba Fitness 505 Games New 19.90 Best 19.90

Rugby World Cup 2011 505 Games New 34.91 Best 34.91

Call of Duty Activision New 42.97 Best 42.97

Privacy Information

Last Updated on Saturday, 18 December 2010 19:08

2 of 2

23/08/2011 9:27 PM

You might also like