WR703N router defaults to 3G mode (Please Reference Chinese manual)
/ Hardware connection
: 123 / Please connection, as follows: 1,2,3. LED: ON, the system is normal. Indicator: Flashing, LAN / WAN network cable is connected Reset: press the Reset button for 5 seconds, LED flashes 3 times release, the device will return to factory state.
Warning: 1. thunderstorm and all your device to connect the power cable removed, to avoid the lightning; 2. away from heat, ventilation; 3. storage, transportation, operation, pay attention to water.
/Set computer
Before Settings, make sure your computer / phone / tablet PC has a wireless network card Window 7 ---
1 /Click Start /Control Panel
INTELNET/Network and INTELNET- /Network and Sharing Center- /Change adapter- /right button /click the wireless network
connection- /select properties /as shown Double-click Intelnet
(TCP/IPv4) click
/Determine Choose to automatically obtain IP / DNS address click /Determine.
/ wireless network connection
Click the wireless icon in the pop network list, select the wireless network to connect, click the Connect button. When the screen displays "Connected" is a success.
4
1.
/Set the router
3G network card into the USB port of the router, and then start setting: Open browser and enter 192.168.1.1 / enter user nameadmin / password: admin then Click
2.
Click on the Left , then Click
3. 4.
Click 3G (3G Router Mode) OR
(Wireless router mode) OR AP (Wireless AP mode) , then Click
/setting
wireless parameter that you choice
3G /3G routing mode
If your Region,, Mobile ISP is not listed, or the default dial-up number, APN did not update, or move ISP requires you to enter a new username and password, select "Set dial-up numbers, ASP, user name and password" then the corresponding box, enter the correct value. /Region: /China ISP/ Mobile ISP: / China Telecom #777 Default dial number: "# 777" SIM/UIM/ PIN : ... /message: PIN SIM/UIN (The current PIN code status unknown, make sure that SIM / UIN in an unlocked state.) /License Type/ Auto O PAP O CHAP (Note: The default is automatic, if necessary, modified.) APN
(Manually set the dial-up number, APN, user name and password)
/Dial number #777 APN: . /User [email protected](optional) /Password.(optional)
then Click
(Repeat symbol)
----------------------------------------------------------------------------/Wireless Status: / Open SSID TP-LINK_3F8E90you can set a name as the network name) / Channel/Automatic /Mode: 11bgn mixed / Band Broadband :/ Automatic / Wireless security options : WPAPSK/WPA2-PSK AES (To ensure network security, it is strongly recommended to open wireless security and use WPA-PSK/WPA2-PSK AES encryption.)
o / Wireless security is not open WPA-PSK/WPA2-PSK PSK / password: PSK / Password.
(8-63 ACS code characters) Recommended to set the password, such as: a1b2c3d4 o / Does not modify the wireless security settings then Click Click Rebooting the router settings to take effect!
(After restarting, on your computer in accordance with the "
reconnect to the router" set, complete set, you can try to access the internet.)
/Wireless router mode
-WAN /Setup Wizard-WAN port connection type
First:
Please use network cable to connect router and computer
1-2-3 step like the 3G routing mode
Allows the router to automatically select the access mode (recommended)
O O O
PPPoE (ADSL / virtual dial-up) ----
/Dynamic IP (/automatically obtain IP) --
/Static IP /Fixed service provider IP)
-----
-------------------------------------------------------------------------------
PPPoE (ADSL / virtual dial-up)
then Click /Internet account: . /Internet password: . /Confirm Password: . (The above is provided by the Internet service providers) then Click Repeat the above symbols
/Dynamic IP (/automatically obtain IP)
Click Repeat the above symbols
/Static IP /Fixed service provider IP)
--- IP /IP address: 0.0.0.0 /Subnet Mask: 0.0.0.0 /Gateway: 0.0.0.0 (/ Optional) DNS / DNS server: 0.0.0.0 (/ Optional) DNS / Alternate DNS server: 0.0.0.0 (/ Optional) (The above is provided by the Internet service providers)
then Click Repeat the above symbols
AP AP mode
-/Setup Wizard - Wireless mode
First:
Please use network cable to connect router and computer
1-2-3 step like the 3G routing mode
/Please select the operating mode type: /Access Point model-----
O /Repeater O /Bridge
---
with AP--- ---
O /Client
---------------------------------------------------------------------------------------
/Access Point model
/ Wireless Network Name TP-LINK_3F8E90 SSID (you can set a name as the network name) / Channel/Automatic /Wireless security options: /Key Type: WPA/WPA2-/ Personal Edition /Password: . (8-63 ACS code characters) Recommended to set the password, such
as: a1b2c3d4 then Click - Click Routers need to restart to take effect . --- After restarting, on your computer in accordance with the "
reconnect to the router" set, complete set, you can try
to access the internet.
/Repeater
/Remote AP TP-LINK_325EA5 (SSID) (Click , AP in the pop-up list, select the front-end relay router, Click "") MAC /Address: E0-05-C5-32-5E-A5 /Wireless security options: /Key Type: WPA/WPA2-/ Personal Edition /Key Type: ()/Automatic (recommended) /Encryption Mode: ()/Automatic (recommended) /Password: . (Choose the type of front-end router's encryption, and enter the appropriate wireless password.) then Click --Click Routers need to restart to take effect . --- After restarting, on your computer in accordance with the "
reconnect to the router" set, complete set, you can try
to access the internet.
/Bridge with AP
/ Wireless Network NameTP-LINK_3F8E90 SSID / Channel1 (Be set to the same channel front-end router) /Add Remote AP: (Click "", the AP in the pop-up list, select the router to bridge, Click "") AP1 MAC / Remote MAC address of AP1 E0-05-C5-32-5E-A5 Remote MAC address of AP2 . Remote MAC address of AP3 . Remote MAC address of AP4 . (To configure the bridge network, make sure that, near the access point using the same channel and encryption.) /Wireless security options: /Key Type: /Does not modify the wireless security settings then Click --Click Routers need to restart to take effect . --- After restarting, on your computer in accordance with the "
reconnect to the router" set, complete set, you can try
to access the internet.
/Client
/ Wireless Network Name TP-LINK_325EA5 (SSID) (Click , AP in the pop-up list, select the front-end relay
router SSID, Click "") /Wireless security options: /Key Type: WPA/WPA2-/ Personal Edition /Key Type: ()/Automatic (recommended) /Encryption Mode: ()/Automatic (recommended) /Password: . (Set to connect to the router with the same encryption method and password.) then Click --Click Routers need to restart to take effect. --- After rebooting, the computer network connection IP address, DNS address, set to automatically obtain addresses.
/ Reconnect to the router
Not
fit to Client mode, and Repeater mode, SSID is the front-end
wireless router's SSID
Windows 7 - Follow
, In the pop-up wireless network list, select the
wireless network (if encrypted, enter the password), click OK.
