Scribd
Upload
570 views2 pages

Flying Fish Paper Airplane Guide

This document provides instructions for making a flying fish paper airplane. The instructions include making an initial center fold, folding the top corners to the center line, folding the sides equally inward, making creases at specific points to form the body and wings, pressing points inward to form the tail, folding a flap for the nose, and making a final fold for the undercarriage before throwing the plane by holding the nose flap.

Uploaded by

Munira Lakhani Lakhani
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
570 views2 pages

Flying Fish Paper Airplane Guide

This document provides instructions for making a flying fish paper airplane. The instructions include making an initial center fold, folding the top corners to the center line, folding the sides equally inward, making creases at specific points to form the body and wings, pressing points inward to form the tail, folding a flap for the nose, and making a final fold for the undercarriage before throwing the plane by holding the nose flap.

Uploaded by

Munira Lakhani Lakhani
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd

Flying Fish Paper Airplane Instructions 1.

First make the normal fold down the middle as shown in and then re-open the paper flat

2. Then fold in the top left hand corner to the center line and the top right hand corner in the same
manner along the diagonal dotted line

3. Fold the two sides EQUALLY in to the center line along the dotted lines

4. Simply fold point S to meet point J in and make this fold along the dotted line and then crease
hard and open the paper again. Then fold along this line in the opposite direction, crease hard and unfold again.

5. Fold L to meet H, crease hard and unfold. Repeat with S and J.

6. press in on the points marked C and D pushing the paper up along the fold made in Step 4 and
giving the pushed inwards and upwards sides

7. Now fold up point S marked to meet point J. This should only involve folding up a flap of paper.
The crease should be made VERY HARD and then unfolded and this flap tucked inside the nose of the plane.

8. Now simply fold out the undercarriage This final form should then be thrown by holding the pocket
mentioned in Step 7 and angling the nose of the plane very slightly downwards. Make a slight cut for better flying

You might also like