Scribd
Upload
669 views1 page

WPS D9.1

This welding procedure specification document contains 3 sentences: It provides details for welding sheet steel and support steel, including the welding process, joint details, base metal specifications, shielding gas, filler metal, welding positions, preheat requirements, and welding technique parameters. The document certifies that the test welds were prepared according to ANSI/AWS D9.1M/D9.1 standards and includes signatures for those who wrote and authorized the procedure.

Uploaded by

pjbedel
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
669 views1 page

WPS D9.1

This welding procedure specification document contains 3 sentences: It provides details for welding sheet steel and support steel, including the welding process, joint details, base metal specifications, shielding gas, filler metal, welding positions, preheat requirements, and welding technique parameters. The document certifies that the test welds were prepared according to ANSI/AWS D9.1M/D9.1 standards and includes signatures for those who wrote and authorized the procedure.

Uploaded by

pjbedel
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Welding Procedure Specification

Company Name: WPS Number: Welding process: Company location: Revision Number: Mode of transfer: Date: Supporting PQR Number(s): Method of Application:

W.P. S.

JOINTS
Type of joint: Groove welded from: Backing: Yes No Type of weld: Backing Type:

BASE METAL
Sheet Steel Support Steel:

Material Specification Type: Type: Thickness range Grade: Grade:

Sheet Steel:

Support Steel: Coatings

Sheet Steel:

Type:

Thickness: Thickness: Type: Classification:

sketch of joint detail

Support Steel: Type:

SHIELDING GAS
Mixture:

FILLER METAL
Specification:

Flow rate; (CFH)

POSITIONS
Fillet Groove: Progression: Min Temp:

PREHEAT
Max Temp:

Technique
Pass Number Electrode Diameter Welding amps/ Wire feed speed Welding volts Travel speed/ Spot time Contact to work distance/ arc length

The undersigned certifies that the statements in this record are correct and that the test welds were prepared, welded, and tested in accordance with the requirements of ANSI/AWS D9.1M/D9.1 (2006), Sheet metal welding code

Written by: Date:

Authorized by:

Signature: _____________________________________

You might also like