Scribd
Upload
584 views3 pages

Tech Manual TR-7550 VB

The document describes a VHF transceiver consisting of separate transmitter, receiver, and power supply units. It provides an overview of the system and refers to included technical manuals for details on each individual unit and how they connect to operate as a transceiver.

Uploaded by

septemberzeroady
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
584 views3 pages

Tech Manual TR-7550 VB

The document describes a VHF transceiver consisting of separate transmitter, receiver, and power supply units. It provides an overview of the system and refers to included technical manuals for details on each individual unit and how they connect to operate as a transceiver.

Uploaded by

septemberzeroady
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

TECHNICAL MANUAL

TR-7550/25/10
VHF TRANSCEIVER

99156_TM_TR75xx_B

Page 1 of 3

LIST OF CONTENTS 1
3 1.1 TRANSCEIVER, GENERAL DESCRIPTION ...........................................................................3 2 TECHNICAL MANUALS FOR RA7202 AND TA7450/25/10 3

SYSTEM DESCRIPTION

99156_TM_TR75xx_B

Page 2 of 2

1
1.1

SYSTEM DESCRIPTION
Transceiver, general description

The transceiver consists of one separate transmitter unit, one power unit and one receiver unit. The transmitter unit and the power supply unit are described in the transmitter TA7450/25/10 manual included in this file. The receiver unit is described in the receiver RA7202 manual, also included in this file. In order to operate the transmitter and the receiver together as a transceiver, the only signal that is necessary to interconnect is the muting signal between the transmitter and the receiver units. In addition a coax cable from the receive output on the transmitter is connected to the antenna input on the receiver. A relay is used to connect the key/mute input on the receiver to the ground reference available on the same connector. See the included technical manuals for details.

Alternatively, if the transceiver is operated from a remote location, the line input is available on the 15 pin D-connector on the transmitter, between pin 5 and 6. The line output is available on the receiver D-connector between pin 5 and 6. Remote keying of the transmitter is performed either by line loop keying or by adding a negative voltage to pin 12 or a positive voltage to pin 7. See the included technical manuals for details.

TECHNICAL MANUALS FOR RA7202 AND TA7450/25/10


99138_TM_RA7202_Y See section 1 8 first part of this manual. See section 1 8 second part of this manual.

RA7202

TA7450/25/10 99137_TM_TA74xx_Y

Y means the latest version of the manual. There can be different versions of different sections within the same manual.

99156_TM_TR75xx_B

Page 3 of 3

You might also like