The information in this document is subject to change without notice.
Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
1998
Document No. D13174EJ1V1DS00 (1st edition)
Date Published April 2002 N CP(K)
Printed in Japan
SILICON POWER TRANSISTOR
2SD1588
NPN SILICON EPITAXIAL TRANSISTOR
FOR LOW-FREQUENCY POWER AMPLIFIERS AND LOW-SPEED SWITCHING
'$7$6+((7
2002
FEATURES
Mold package that does not require an insulating board or
insulation bushing
Large current capacity in small dimension: IC(DC) = 7 A
Low collector saturation voltage: VCE(sat) = 0.5 V MAX. (@5 A)
Ideal for use in ramp drivers or inductance drivers
Complementary transistor: 2SB1097
ABSOLUTE MAXIMUM RATINGS (TA = 25 C)
Parameter Symbol Ratings Unit
Collector to base voltage VCBO 100 V
Collector to emitter voltage VCEO 60 V
Emitter to base voltage VEBO 7.0 V
Collector current (DC) IC(DC) 7.0 A
Collector current (Pulse) IC(pulse)* 15 A
Base current (DC) IB(DC) 3.5 A
Total power dissipation PT (TC = 25C) 30 W
Total power dissipation PT (TA = 25C) 2.0 W
Junction temperature Tj 150 C
Storage temperature Tstg 55 to +150 C
* PW 300 s, duty cycle 10%
PACKAGE DRAWING (UNIT: mm)
Electrode Connection
<1> Base
<2> Collector
<3> Emitter
ELECTRICAL CHARACTERISTICS (TA = 25 C)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Collector cutoff current ICBO VCB = 80 V, IE = 0 10 A
Emitter cutoff current IEBO VEB = 5.0 V, IC = 0 10 A
DC current gain hFE1** VCE = 1.0 V, IC = 3 A 40 200
DC current gain hFE2** VCE = 1.0 V, IC = 5 A 20
Collector saturation voltage VCE(sat)** IC = 5 A, IB = 0.5 A 0.5 V
Base saturation voltage VBE(sat)** IC = 5 A, IB = 0.5 A 1.5 V
** Pulse test PW 350 s, duty cycle 2%/per pulsed
hFE CLASSIFICATION
Marking M L K
hFE1 40 to 80 60 to 120 100 to 200
Data Sheet D13174EJ1V1DS 2
2SD1588
TYPICAL CHARACTERISTICS (TA = 25 C)
T
o
t
a
l
P
o
w
e
r
D
i
s
s
i
p
a
t
i
o
n
P
T
(
W
)
Temperature T (C)
Case Temperature TC (C)
Collector to Emitter Voltage VCE (V)
C
o
l
l
e
c
t
o
r
C
u
r
r
e
n
t
I
C
(
A
)
C
o
l
l
e
c
t
o
r
C
u
r
r
e
n
t
I
C
(
A
)
Pulse Width PW (s)
Collector to Emitter Voltage VCE (V)
Collector Current IC (A)
T
r
a
n
s
i
e
n
t
T
h
e
r
m
a
l
R
e
s
i
s
t
a
n
c
e
R
t
h
(
j
-
c
)
(
C
/
W
)
D
C
C
u
r
r
e
n
t
G
a
i
n
h
F
E
I
C
D
e
r
a
t
i
n
g
d
T
(
%
)
(with infinite heatsink)
TA = 25C (without heatsink)
With infinite heatsink
(Tc = 25C)
2 mm aluminum board,
silicon grease coating
Without heatsink
Data Sheet D13174EJ1V1DS 3
2SD1588
Collector Current IC (A)
C
o
l
l
e
c
t
o
r
S
a
t
u
r
a
t
i
o
n
V
o
l
t
a
g
e
V
C
E
(
s
a
t
)
(
V
)
B
a
s
e
S
a
t
u
r
a
t
i
o
n
V
o
l
t
a
g
e
V
B
E
(
s
a
t
)
(
V
)
2SD1588
M8E 00. 4
The information in this document is current as of July, 2001. The information is subject to change
without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data
books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products
and/or types are available in every country. Please check with an NEC sales representative for
availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without prior
written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document.
NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of
third parties by or arising from the use of NEC semiconductor products listed in this document or any other
liability arising from the use of such products. No license, express, implied or otherwise, is granted under any
patents, copyrights or other intellectual property rights of NEC or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of customer's equipment shall be done under the full
responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third
parties arising from the use of these circuits, software and information.
While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers
agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize
risks of damage to property or injury (including death) to persons arising from defects in NEC
semiconductor products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment, and anti-failure features.
NEC semiconductor products are classified into the following three quality grades:
"Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products
developed based on a customer-designated "quality assurance program" for a specific application. The
recommended applications of a semiconductor product depend on its quality grade, as indicated below.
Customers must check the quality grade of each semiconductor product before using it in a particular
application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's
data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not
intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness
to support a given application.
(Note)
(1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries.
(2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for
NEC (as defined above).
This datasheet has been download from:
www.datasheetcatalog.com
Datasheets for electronics components.
