System Valves

DATA SHEET

VE411 & 431 SERIES ELECTRONIC SYSTEM CONTROL VALVES

Universal two way, or three way mixing globe valves - 25mm to 80mm (1 to 3)
VALVE ASSEMBLIES - These assemblies are complete with
actuators, linkage assembly and valve body. They are suitable for
use in 2-way applications, angle or straight to factory order.
VALVE BODIES - Utilising anti-dezincification bronze components
and a heavy duty valve body, they are coupled with a unique
variable ratio, all-metal cast linkage system which runs slower at
the ends for improved modulation and better close-off force,
speeding up in the centre range. Built to BSPT thread and DIN
flange European standard as well as NPT thread and ANSI125
flange American standard.
OTHER FEATURES INCLUDE:
11/2 million cycle U-cup packing cartridge
Stem scrubber rings top and bottom
Guided stem both top and bottom
Parabolic and fluted plugs
Better than 50:1 turndown ratio
Maintenance free High and low Cv/Kvs each size
Trouble shooting 'A port' pointer
Tapped ports for optional P plugs
Valve Body Dimensions
A
125mm (5)
140mm (5.5)
152mm (6)
250mm
9.5

B
30mm (1.2)
38mm (1.5)
39mm (1.5)
91mm
3.6

C
69mm (2.7)
77mm (3)
84mm (3.3)
127mm
4.76

Weight
2lbs/0.9kgs
4lbs/1.8kgs
6lbs/2.7kgs
21.6kgs
48lbs

Dimensions are to B16.10-2000 standards

178mm
(7)

152mm
(6)

80mm
(3)

25 - 50mm
(1-2)

AV1500
(for 16-41Nm
Actuators)
Wgt: 10lbs/4.5kgs

AV-2400
(max. 16Nm
Actuators)
Wgt: 1lbs/0.45kgs

APPLICATION - Primarily designed for use on closed systems, these

valves can nonetheless be used in many other applications.
Dezincification resistant, they can be used in most HVAC control
systems as well as industrial applications. When used on mains water
or open systems, such as cooling towers or open tank installations,
mineral deposit build-up may affect operation requiring more frequent
maintenance. (For heat transfer oils, steam, brine, seawater, etc.,
refer to the factory with full details of the fluid specification.)
Suitable for use as either 2-way or 3-way valves, in hot or cold water
systems, and with static pressure rating suitable to 400 psi., (ANSI
250), they adapt to low or hi rise installations.
Technically mixing valves in their 3-way format, these valves can
nonetheless be used on either mixing or diverting applications as
applied to the load, but correct piping should be observed on diverting
applications, and only in closed systems. The water must always mix
within the body even though it can divert through or around the load.
Diverting into open systems such as tanks, sumps or cooling towers
should be avoided with this series of valves. (Refer to the installation
instruction sheets.)

ELECTRONIC VALVE ACTUATORS

Actuators are available for 2-position, floating (tri-state) and
0-10 VDC modulating control. Ambient temperature is from
-320C (-250F) to 550C (1300F). Ambient humidity 95%RH noncondensing. Gear lubrication silicone-free. Power supply voltage is
24 VAC 50/60Hz on all models.
Modulating actuators are supplied with a 0 - 10 VDC feedback to
transmit the position of the actuator for use in external control loops
or position indication. Optional auxillary switches also available for
all models.
All incorporate override lever/position indicators. The heavy duty
steel Geneva linkage movement provides a robust, variable ratio
motion which provides more force at the ends of travel for seating
the valve extra tightly. The same variable ratio assists in the valve
characteristics to improve modulating control.
OTHER FEATURES INCLUDE:
Lower, more compact package
Both mounting nuts and studs to ensure ease of removal,
even after decades of corrosive service
All metal. No plastic. Hardened steel movement
Override lever/pointer on all units
Factory installed and pre-adjusted to its valve body
Maintenance-free, long life expectancy and housed in an
attractive, corrosion resistant, sturdy metal yoke
Valve Actuators
Part no.

Signal input

Torque

Linkage

Type

Stem Force

Tri-state
0-10VDC
Tri-state
0-10 VDC
Tri-state
0-10 VDC
Tri-state
0-10 VDC
Tri-state
0-10 VDC

5Nm / 44in/lb
5Nm / 44in/lb
10Nm / 88in/lb
10Nm / 88in/lb
16Nm / 132in/lb
16Nm / 132in/lb
25Nm / 221in/lb
25Nm / 221in/lb
35Nm / 310in/lb
35Nm / 310in/lb

AV-2414
AV-2414
AV-2414
AV-2414
AV-2417
AV-2417
AV-1524
AV-1524
AV-1524
AV-1524

I
I
I
I
H
H
K
K
K
K

60kg / 132lb
60kg / 132lb
120kg / 264lb
120kg / 264lb
127kg / 280lb
127kg / 280lb
150kg / 331lb
150kg / 331lb
211kg / 465lb
211kg / 465lb

2-position
Tri-state
0-10 VDC
2-position
Tri-State
0-10 VDC
Tri-State
0-10 VDC
0-10 VDC

7Nm / 62in/lb
7Nm / 62in/lb
7Nm / 62in/lb
16Nm / 142in/lb
16Nm / 142in/lb
16Nm / 142in/lb
16Nm / 142in/lb
16Nm / 142in/lb
41Nm / 360in/lb

AV-2414
AV-2414
AV-2414
AV-2417
AV-2417
AV-2417
AV-1524
AV-1524
AV-1524

I
I
I
H
H
H
K
K
K

85kg / 186lb
85kg / 186lb
85kg / 186lb
127kg / 280lb
127kg / 280lb
127kg / 280lb
95kg / 210lb
95kg / 210lb
245kg / 540lb

Non-spring return (Fail last position)

ME-5120
ME-5320
ME-5130
ME-5330
ME-5140
ME-5340
ME-5140L
ME-5340L
ME-5150
ME-5350
Spring return
ME-5430
ME-5630
ME-5830
ME-5440
ME-5640
ME-5840
ME-5640
ME-5840
RBM-6060

Spartan Peripheral Devices telephone: (450) 424-6067 fax: (450) 424-6071 email: [email protected] website: www.spartan-pd.com

System Valves V411 V431

18 January 2011

Printed in Canada

Size *
25mm (1)
40mm (11/2)
50mm (2)
DIN 80mm
ANSI 3

System Valves

DATA SHEET

VE411 & 431 SERIES ELECTRONIC SYSTEM CONTROL VALVES

PIPING INSTALLATION INSTRUCTIONS
Mixing valves must always be used with the flow leaving
the common AB port. They must always be installed on
the return, or leaving, side of the coil. The application is
to be diverting the water in the T through or around the
coil. The water mixes in the valve from the coil or bypass
to go back to the system.These valves can be piped in
two different configurations, all achieving the same
outcome.When the stem of the valve is up, the flow is
from Port B to Port AB. When the stem travels down, Port
A starts to open and Port B starts to close.
Reversing the Stem Travel
Non-spring return actuators rotation can be reversed by a
switch located on the actuator Spring Return Actuators, in
most cases, have to be rotated by removing the actuator
from the linkage. Once removed, flip the actuator to
change the rotation of the spring.

Actuator Wiring Diagrams

CLOSED
A-AB

ME532X
ME533X

OPEN
A-AB

OPEN
A-AB

CLOSED
A-AB

IMPORTANT: Install in upright position or at a

maximum angle of 45. DO NOT INSTALL
HORIZONTALLY as this may limit
the life expectancy of the packing.

Diagram 2
Spring Stem Up Flow is through the coil
* Reverse the actuator
rotation to spring stem
down to have the flow
bypass the coil

Diagram 1
Spring Stem Up Flow is bypassing the coil
* Reverse the actuator
rotation to spring stem
down to have flow
through the coil

OK up
to 45

Optional

Flow direction - observe flow direction as indicated on valve body.

Globe valves or lift-and-lay valves are designed for flow in one specific
direction only, that is, the liquid forcing the plug off the seat. In the stem down
position the flow is from A to AB, in the stem up position the flow is from B to
AB. If used with the flow going backwards, the water forces the plug to slam
against its seat. Slamming and/or water hammer may then be apparent.

ME512X
ME513X

Optional
CLOSED
A- A-AB

C
CLOSED
A-AB

OPEN
A-AB

IN (A)

IN (B)

Replaceable
packing
cartridge
AV400

OUT (AB)

Wiring Colour Coding

1 Supply 24VAC
Red
2 Neutral 24VAC
Black
6 Signal Clockwise
Violet
7 Signal Counterclockwise Orange

OPEN
A-AB

I IN (A)

IN (B)

OUT (AB)

8
9
3
4

Optional

0 - 10Vdc input signal

0 - 10Vdc output signal
Line 120Vac
Neutral 120Vac

Gray
Pink
Black
White

OPTIONAL PLUG KIT PART NUMBERS

(to convert a 3 way valve body into a 2 way)
American Thread
Metric Thread
AV411N10 - 1.0
AV411B10 - 25mm
AV411N15 - 1.5
AV411B15 - 40mm
AV411N20 - 2.0
AV411B20 - 50mm
ANSI Flange
DIN Flange
AV431AK1 - 3.0
AV431DK1 - 80mm
To convert 3 way valve
body into 2 way (either
straight or an angle), plug
bottom port B or side
port A with a plug kit.

Spartan Peripheral Devices telephone: (450) 424-6067 fax: (450) 424-6071 email: [email protected] website: www.spartan-pd.com

System Valves V411 V431

18 January 2011

System Valves

DATA SHEET

VE411 & 431 SERIES ELECTRONIC SYSTEM CONTROL VALVES

SPECIFICATIONS
SPECIFICATIONS - V-411 ANSI 250 PN16 BRONZE VALVES

SPECIFICATIONS - V-431 ANSI 125 PN16 CAST IRON VALVES

Sizes ......................................................25, 40 & 50mm. (1, 11/2 & 2)

Sizes ......................................................................................... 80mm (3)

Cvs ................................................................... 6 & 11; 16 & 24; 35 & 45

Cvs ........................................................................................65, 75 & 110

Kvs ..........................................................5 & 9.2; 13.3 & 20, 29.2 & 37.5

Kvs..................................................................................... 54.2; 62.4 & 95

Connections ...................................3 female NPT(amer) or BSPT(euro)

Connections ................................ 3 flanges 125# ANSI or PN10, 16, 25

Characteristics ................................................. eq% ends - linear center

Plug characteristics ......................................... eq% ends - linear center

Turndown ratio ....................................................................................50:1

Turndown ratio ....................................................................................50:1

Close off ....................................................... ANSI Class III tight close off

Close off .......................................................ANSI Class III tight close off

Pressure ratings..........................................................................ANSI 250

Pressure rating for V431 ANSI Flange valves..........................ANSI 125

ANSI 250 rating..............32 - 150F (0 - 66C) .........400 psig / 27.6 bar

ANSI 125 psig static ......32 - 150F (0 - 66C) ........175 psig / 12.1 bar

175F (79C).......................392 psig / 27.0 bar

175F (79C).....................170 psig / 11.7 bar

200F (93C).......................385 psig / 26.5 bar

200F (93C).....................165 psig / 11.4 bar

250F (121C).....................250 psig / 17.2 bar

250F (121C) ....................125 psig / 8.6 bar

Pressure rating...................................................................................PN25
Standard rating to 25 bar or 368psi.

Pressure rating for V431 DINFlange valves...................................PN16

Standard rating to 16 bar or 240psi.

Max fluid temp rating .........................................................130C (267F)

Max fluid temp rating .........................................................130C (267F)

Min fluid temp rating ................................................................0C (32F)

Min fluid temp rating .................................................................0C (32F)

Max steam pressure ..........................................................15psi /100kpa

Max steam pressure ..........................................................15psi /100kpa

Packing .........................................................multiple U-cup EPDM rings

Packing .........................................................multiple U-cup EPDM rings

Scrubbing rings .......................................................top and bottom Viton

Scrubbing rings .......................................................top and bottom Viton

Stem.....................burnished mirror finish 303 stainless steel PRDT 70

Stem.....................burnished mirror finish 303 stainless steel PRDT 70

Seat top .....................................................integral bronze C84400 (uns)

Seat top ...........................................................................integral cast iron

Seat bottom .........................................removable bronze C84400 (uns)

Seat bottom .....................................................................integral cast iron

Disc top & bottom................................................................brass C93200

Disc top & bottom .............................................................bronze C93200

Stem guides ....................................................packing top & skirt bottom

Stem guides ................................................... packing top & skirt bottom

Lift ................................................................14mm exc Cvs 45 @17mm

Lift .......................................65 Cv 14mm; 75 Cv 17mm: 110 Cv 22mm

COMMERCIAL CONTROL FEATURES - The unique universal design of

Spartan PDs valve line is the cost effective "one piece" heavy bronze valve
body and its ability to be used as a 2-way or 3-way valve by closing off the
unused ports "A" or "B" (Never "AB"). "Suction-cup" effects will not occur and,
because of the unique plug characterisation, good control will be had in both
2 and 3-way formats. (modified equal % to linear. See charts). These specially
designed plug shapes incorporate the best features of equal percentage and
linear characterization to provide a valve excellent for modulating well at low
flow, while adapting to provide linear characterization in the later stages of
valve opening. This feature, along with the variable ratio linkage kit, provides
better mixing yet no mid-range starvation, (common with most 3-way equal
percentage valves). This allows for improved throttling action in 2-way duty. A
unique trouble-shooting feature, a raised marker at the top of the bonnet,
clearly defines port "A" after the insulation (lagging) has been installed.

Benefits of Spartans Universal 2 way & 3 way valve design.

INDUSTRIAL CONTROL VALVE FEATURES

For industrial applications these valves suffice well, incorporating features
such as both bottom and top stem guides for quieter, vibration-free
performance, stainless steel and low zinc components for years of corrosion
free service life, and tapping points at all ports for test gauges, temperature
probes, pressure taps, etc. (tapped to 1/8" NPT or BSPT to order). They also
adapt to pneumatic operation.

Modified equal % to linear flow characteristics allows

for precise control in two way valves and no mid
range starvation in three way valves.

SUITABLE FLUIDS - These valves are recommended for use with hot and
chilled water or glycol. Check with the factory for other fluids.
Spartan Peripheral Devices telephone: (450) 424-6067 fax: (450) 424-6071 email: [email protected] website: www.spartan-pd.com

System Valves V411 V431

18 January 2011

System Valves
ANSI Standards
SPECIFICATION

NON-SPRING RETURN CONTROL VALVES ASSEMBLIES - PART NUMBERS

Valve
Body
Part No:
V411
V411
V411
V411
V411
V411

Valve
Size

CV

Valve
Connection

Valve
Linkage

6
11
16
24
35
45

Valve
Body
Type
2/3 Way
2/3 Way
2/3 Way
2/3 Way
2/3 Way
2/3 Way

1"
1"
1 1/2"
1 1/2"
2"
2"

NPT Thread
NPT Thread
NPT Thread
NPT Thread
NPT Thread
NPT Thread

AV2414 ( I )
AV2414 ( I )
AV2414 ( I )
AV2414 ( I )
AV2414 ( I )
AV2417 ( H )

V411
V411
V411
V411
V431
V431

1 1/2"
1 1/2"
2"
2"
3"
3"

16
24
35
45
65
75

2/3 Way
2/3 Way
2/3 Way
2/3 Way
2/3 Way
2/3 Way

NPT Thread
NPT Thread
NPT Thread
NPT Thread
ANSI Flange
ANSI Flange

AV2414 ( I )
AV2414 ( I )
AV2414 ( I )
AV2417 ( H )
AV2414 ( I )
AV2417 ( H )

V411
V411
V431
V431
V431

2"
2"
3"
3"
3"

35
45
65
75
110

2/3 Way
2/3 Way
2/3 Way
2/3 Way
2/3 Way

NPT Thread
NPT Thread
ANSI Flange
ANSI Flange
ANSI Flange

AV2414 ( I )
AV2417 ( H )
AV2414 ( I )
AV2417 ( H )
AV1524 ( K )

V431
V431
V431

3"
3"
3"

65
75
110

2/3 Way
2/3 Way
2/3 Way

ANSI Flange
ANSI Flange
ANSI Flange

AV2414 ( I )
AV2417 ( H )
AV1524 ( K )

V431
V431

3"
3"

75
110

2/3 Way
2/3 Way

ANSI Flange
ANSI Flange

AV1519 ( Q )
AV1524 ( K )

SPECIFICATION
Valve
Body
Part No:
V411
V411
V411
V411
V411
V411
V411
V411
V431

Valve
Size

DATA SHEET

Actuator
Floating
ME5120 44 in/lb
VE411-6-I-5120
VE411-11-I-5120
VE411-16-I-5120
VE411-24-I-5120
VE411-35-I-5120
VE411-45-H-5120
ME5130 88 in/lb
VE411-16-I-5130
VE411-24-I-5130
VE411-35-I-5130
VE411-45-H-5130
VE431-65-I-5130
VE431-75-H-5130
ME5140 132 in/lb
VE411-35-I-5140
VE411-45-H-5140
VE431-65-I-5140
VE431-75-H-5140
VE431-110-K-5140
ME5140L 221 in/lb
VE431-65-I-5140L
VE431-75-H-5140L
VE431-110-K-5140L
ME5150 310 in/lb
VE431-75-Q-5150
VE431-110-K-5150

Actuator 0-10Vdc
Modulating
ME5320 44 in/lb
VE411-6-I-5320
VE411-11-I-5320
VE411-16-I-5320
VE411-24-I-5320
VE411-35-I-5320
VE411-45-H-5320
ME5330 88 in/lb
VE411-16-I-5330
VE411-24-I-5330
VE411-35-I-5330
VE411-45-H-5330
VE431-65-I-5330
VE431-75-H-5330
ME5340 132 in/lb
VE411-35-I-5340
VE411-45-H-5340
VE431-65-I-5340
VE431-75-H-5340
VE431-110-K-5340
ME5340L 221 in/lb
VE431-65-I-5340L
VE431-75-H-5340L
VE431-110-K-5340L
ME5350 310 in/lb
VE431-75-Q-5350
VE431-110-K-5350

Close-off presure
PSI
BAR
100
6.80
100
6.80
66
4.60
66
4.60
37
2.60
25
1.70
100
100
70
45
30
15

6.80
6.80
4.70
3.00
2.04
1.02

100
70
55
30
25

6.80
4.76
3.74
2.04
1.70

90
55
40

6.12
3.74
2.72

85
65

5.78
4.42

SPRING RETURN CONTROL VALVES ASSEMBLIES - PART NUMBERS

CV

Valve
Body
Type
2/3 Way
2/3 Way
2/3 Way
2/3 Way
2/3 Way
2/3 Way
2/3 Way
2/3 Way
2/3 Way

Valve
Connection

Valve
Linkage

Actuator
Actuator 0-10Vdc
Two Position On/Off
Modulating
ME5430 62 in/lb
ME5830 62 in/lb
1"
6
NPT Thread
AV2414 ( I )
VE411-6-I-5420
VE411-6-I-5820
1"
11
NPT Thread
AV2414 ( I )
VE411-11-I-5420
VE411-11-I-5820
1"
6
NPT Thread
AV2414 ( I )
VE411-6-I-5430
VE411-6-I-5830
1"
11
NPT Thread
AV2414 ( I )
VE411-11-I-5430
VE411-11-I-5830
1 1/2" 16
NPT Thread
AV2414 ( I )
VE411-16-I-5430
VE411-16-I-5830
1 1/2" 24
NPT Thread
AV2414 ( I )
VE411-24-I-5430
VE411-24-I-5830
2"
35
NPT Thread
AV2414 ( I )
VE411-35-I-5430
VE411-35-I-5830
2"
45
NPT Thread
AV2417 ( H )
VE411-45-H-5430
VE411-45-H-5830
3"
65
ANSI Flange
AV2414 ( I )
VE431-65-I-5430
VE431-65-I-5830
ME5440 142 in/lb
ME5840 142 in/lb
V411
1 1/2" 16
2/3 Way
NPT Thread
AV2414 ( I )
VE411-16-I-5440
VE411-16-I-5840
V411
1 1/2" 24
2/3 Way
NPT Thread
AV2414 ( I )
VE411-24-I-5440
VE411-24-I-5840
V411
2"
35
2/3 Way
NPT Thread
AV2414 ( I )
VE411-35-I-5440
VE411-35-I-5840
V411
2"
45
2/3 Way
NPT Thread
AV2417 ( H )
VE411-45-H-5440
VE411-45-H-5840
V431
3"
65
2/3 Way
ANSI Flange
AV2414 ( I )
VE431-65-I-5440
VE431-65-I-5840
V431
3"
75
2/3 Way
ANSI Flange
AV2417 ( H )
VE431-75-H-5440
VE431-75-H-5840
V431
3"
110
2/3 Way
ANSI Flange
AV1524 ( K )
VE431-110-K-5440
VE431-110-K-5840
ME6060 360 in/lb
ME6060 360 in/lb
V431
3"
65
2/3 Way
ANSI Flange
AV1519 ( Q )
VE431-65-Q-6060
VE431-65-Q-6060
V431
3"
75
2/3 Way
ANSI Flange
AV1519 ( Q )
VE431-75-Q-6060
VE431-75-Q-6060
V431
3"
110
2/3 Way
ANSI Flange
AV1524 ( K )
VE431-110-K-6060
VE431-110-K-6060
The close off pressures are rated as per ANSI/FCI 70-2 1976, Class III 0.1% seat leakage.
Maximum differential pressure across the valve body should not exceed 60 PSI (4.08 bar) to prevent water noise and cavitation.

Spartan Peripheral Devices telephone: (450) 424-6067 fax: (450) 424-6071 email: [email protected] website: www.spartan-pd.com

Close-off presure
PSI
BAR
35
2.40
35
2.40
100
6.80
100
6.80
70
4.76
70
4.76
52
3.50
35
2.38
30
2.04
125
125
100
80
55
40
25

8.50
8.50
6.80
5.44
3.74
2.72
1.70

100
100
75

6.80
6.80
5.10

System Valves V411 V431

18 January 2011

System Valves
Metric Standards
SPECIFICATION

NON-SPRING RETURN CONTROL VALVES ASSEMBLIES - PART NUMBERS

Valve
Valve
KV
Body
Size
Part No: mm
V411
25
5.00
V411
25
9.20
V411
40
13.30
V411
40
20.00
V411
50
29.20
V411
50
37.50

Valve
Body
Type
2/3 Way
2/3 Way
2/3 Way
2/3 Way
2/3 Way
2/3 Way

Valve
Connection

Valve
Linkage

BSP Thread
BSP Thread
BSP Thread
BSP Thread
BSP Thread
BSP Thread

AV2414 ( I )
AV2414 ( I )
AV2414 ( I )
AV2414 ( I )
AV2414 ( I )
AV2417 ( H )

V411
V411
V411
V411
V431
V431

40
40
50
50
80
80

13.30
20.00
29.20
37.50
54.20
62.40

2/3 Way
2/3 Way
2/3 Way
2/3 Way
2/3 Way
2/3 Way

BSP Thread
BSP Thread
BSP Thread
BSP Thread
DIN Flange
DIN Flange

AV2414 ( I )
AV2414 ( I )
AV2414 ( I )
AV2417 ( H )
AV2414 ( I )
AV2417 ( H )

V411
V411
V431
V431
V431

50
50
80
80
80

29.20
37.50
54.20
62.40
95.00

2/3 Way
2/3 Way
2/3 Way
2/3 Way
2/3 Way

BSP Thread
BSP Thread
DIN Flange
DIN Flange
DIN Flange

AV2414 ( I )
AV2417 ( H )
AV2414 ( I )
AV2417 ( H )
AV1524 ( K )

V431
V431
V431

80
80
80

54.20
62.40
95.00

2/3 Way
2/3 Way
2/3 Way

DIN Flange
DIN Flange
DIN Flange

AV2414 ( I )
AV2417 ( H )
AV1524 ( K )

V431
V431

80
80

62.40
95.00

2/3 Way
2/3 Way

DIN Flange
DIN Flange

AV1519 ( Q )
AV1524 ( K )

SPECIFICATION

DATA SHEET

Actuator
Floating
ME5120 5 Nm
VE411-5.0-I-5120
VE411-9.2-I-5120
VE411-13.3-I-5120
VE411-20.0-I-5120
VE411-29.2-I-5120
VE411-37.5-H-5120
ME5130 10 Nm
VE411-13.3-I-5130
VE411-20.0-I-5130
VE411-29.2-I-5130
VE411-37.5-H-5130
VE431-54.2-I-5130
VE431-62.4-H-5130
ME5140 15 Nm
VE411-29.2-I-5140
VE411-37.5-H-5140
VE431-54.2-I-5140
VE431-62.4-H-5140
VE431-95-K-5140
ME5140L 25 Nm
VE431-54.2-I-5140L
VE431-62.4-H-5140L
VE431-95-K-5140L
ME5150 35 Nm
VE431-62.4-Q-5150
VE431-95-K-5150

Actuator 0-10Vdc
Modulating
ME5320 5 Nm
VE411-5.0-I-5320
VE411-9.2-I-5320
VE411-13.3-I-5320
VE411-20.0-I-5320
VE411-29.2-I-5320
VE411-37.5-H-5320
ME5330 10 Nm
VE411-13.3-I-5330
VE411-20.0-I-5330
VE411-29.2-I-5330
VE411-37.5-H-5330
VE431-54.2-I-5330
VE431-62.4-H-5330
ME5340 15 Nm
VE411-29.2-I-5340
VE411-37.5-H-5340
VE431-54.2-I-5340
VE431-62.4-H-5340
VE431-95-K-5340
ME5340L 25 Nm
VE431-54.2-I-5340L
VE431-62.4-H-5340L
VE431-95-K-5340L
ME5350 35 Nm
VE431-62.4-Q-5350
VE431-95-K-5350

Close-off presure
PSI
BAR
100
6.80
100
6.80
66
4.60
66
4.60
37
2.60
25
1.70
100
100
70
45
30
15

6.80
6.80
4.70
3.00
2.04
1.02

100
70
55
30
25

6.80
4.76
3.74
2.04
1.70

90
55
40

6.12
3.74
2.72

85
65

5.78
4.42

SPRING RETURN CONTROL VALVES ASSEMBLIES - PART NUMBERS

Valve
Valve
KV
Body
Size
Part No: mm
V411
25
5.00
V411
25
9.20
V411
25
5.00
V411
25
9.20
V411
40
13.30
V411
40
20.00
V411
50
29.20
V411
50
37.50
V431
80
54.20

Valve
Body
Type
2/3 Way
2/3 Way
2/3 Way
2/3 Way
2/3 Way
2/3 Way
2/3 Way
2/3 Way
2/3 Way

Valve
Connection

Valve
Linkage

Actuator
Actuator 0-10Vdc
Two Position On/Off
Modulating
ME5430 7 Nm
ME5830 7 Nm
BSP Thread
AV2414 ( I )
VE411-5.0-I-5420
VE411-5.0-I-5820
BSP Thread
AV2414 ( I )
VE411-9.2-I-5420
VE411-9.2-I-5820
BSP Thread
AV2414 ( I )
VE411-5.0-I-5430
VE411-5.0-I-5830
BSP Thread
AV2414 ( I )
VE411-9.2-I-5430
VE411-9.2-I-5830
BSP Thread
AV2414 ( I )
VE411-13.3-I-5430
VE411-13.3-I-5830
BSP Thread
AV2414 ( I )
VE411-20.0-I-5430
VE411-20.0-I-5830
BSP Thread
AV2414 ( I )
VE411-29.2-I-5430
VE411-29.2-I-5830
BSP Thread
AV2417 ( H )
VE411-37.5-H-5430
VE411-37.5-H-5830
DIN Flange
AV2414 ( I )
VE431-54.2-I-5430
VE431-54.2-I-5830
ME5440 16 Nm
ME5840 16 Nm
V411
40
13.30
2/3 Way
BSP Thread
AV2414 ( I )
VE411-13.3-I-5440
VE411-13.3-I-5840
V411
40
20.00
2/3 Way
BSP Thread
AV2414 ( I )
VE411-20.0-I-5440
VE411-20.0-I-5840
V411
50
29.20
2/3 Way
BSP Thread
AV2414 ( I )
VE411-29.2-I-5440
VE411-29.2-I-5840
V411
50
37.50
2/3 Way
BSP Thread
AV2417 ( H )
VE411-37.5-H-5440
VE411-37.5-H-5840
V431
80
54.20
2/3 Way
DIN Flange
AV2414 ( I )
VE431-54.2-I-5440
VE431-54.2-I-5840
V431
80
62.40
2/3 Way
DIN Flange
AV2417 ( H )
VE431-62.4-H-5440
VE431-62.4-H-5840
V431
80
95.00
2/3 Way
DIN Flange
AV1524 ( K )
VE431-95-K-5440
VE431-95-K-5840
ME6060 40 Nm
ME6060 40 Nm
V431
80
54.20
2/3 Way
DIN Flange
AV1519 ( Q )
VE431-54.2-Q-6060
VE431-54.2-Q-6060
V431
80
62.40
2/3 Way
DIN Flange
AV1519 ( Q )
VE431-62.4-Q-6060
VE431-62.4-Q-6060
V431
80
95.00
2/3 Way
DIN Flange
AV1524 ( K )
VE431-95-K-6060
VE431-95-K-6060
The close off pressures are rated as per ANSI/FCI 70-2 1976, Class III 0.1% seat leakage.
Maximum differential pressure across the valve body should not exceed 60 PSI (4.08 bar) to prevent water noise and cavitation.

Spartan Peripheral Devices telephone: (450) 424-6067 fax: (450) 424-6071 email: [email protected] website: www.spartan-pd.com

Close-off presure
PSI
BAR
35
2.40
135
2.40
100
6.80
100
6.80
70
4.76
70
4.76
52
3.50
35
2.38
30
2.04
125
125
100
80
55
40
25

8.50
8.50
6.80
5.44
3.74
2.72
1.70

100
100
75

6.80
6.80
5.10

System Valves V411 V431

18 January 2011