0% found this document useful (0 votes)

197 views

Inductive Sensors

All specifications are subject to change without notice. Reprint, even in part, only with our consent. With publication of this catalogue all former printed catalogues about RECHNER INDUCTIVE SENSORS are invalid.

Uploaded by

Moustapha Seye

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

197 views

Inductive Sensors

Uploaded by

Moustapha Seye

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 96

CATALOGUE

INDUCTIVE SENSORS

IAS

Registration No.: 1327-01

Testing laboratory accredited according to DIN EN 45001 Reg.-No. DAT-P-048/95-00

For all transactions, the newest version of the General Conditions of Sale and Delivery for Products and Services of the Electrical Industry ZVEI shall apply, along with the supplementary conditions extended reservation of proprietary rights, together with the supplements listed on our order confirmations and/or invoices. All specifications are subject to change without notice. Reprint, even in part, only with our consent. RECHNER Germany 09/2004 GB - Printed in EU, all rights reserved. Edition September 2004 With publication of this catalogue all former printed catalogues about RECHNER inductive sensors are invalid.

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

All specifications are subject to change without notice. (08/2004)

TABLE OF CONTENTS CATALOGUE INDUCTIVE SENSORS IAS

PAGES TECHNOLOGY ............................................................................................................ 4-5 ADJUSTMENT ................................................................................................................ 6 TYPICAL CURVES ......................................................................................................... 7 MOUNTING .................................................................................................................. 8-9 TECHNICAL TERMS ................................................................................................. 9-10 APPLICATION EXAMPLES.......................................................................................... 11 SERIES ......................................................................................................................... 12 TYPE CODE.................................................................................................................. 13 CYLINDRICAL HOUSINGS ..................................................................................... 15-56 ATEX/StEx SERIES 10/20 ....................................................................................... 57-60 ATEX AND ATEX/StEx SERIES 30 (NAMUR) ........................................................ 61-74 INDUCTIVE HIGH-TEMPERATURE SENSORS ..................................................... 75-84 FEMALE CONNECTORS ............................................................................................. 85 MOUNTING BLOCKS ................................................................................................... 86 FEMALE CONNECTOR, SCREENED .......................................................................... 86 PROTECTION CAPS AND PROTECTION SETS ........................................................ 87 NORMS .................................................................................................................... 88-89 SPECIFICATION FOR EXPLOSION PROTECTION .................................................... 90 TYPE SELECTION IN ARTICLE NUMBER ORDER ............................................... 91-92 TYPE SELECTION IN TYPE DESCRIPTION ORDER ............................................ 93-94

All specifications are subject to change without notice. (05/2004)

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

TECHNOLOGY
The inductive sensors, our abbreviation IAS, contain a transistor oscillator whose power consumption is influenced by the approach of metals and other electrically conductive materials. This effect can also be achieved through a non-conductive material. Depending on the type, the current change of the oscillator will be amplified to a streamlined output signal or output as a binary signal by a switching amplifier.

Output stages with npn or pnp transistors are available for DC operation. A transistor output stage or FET-output is integrated for AC connection

The output switching functions are NO, NC or change-over (antivalent), similar to mechanical switches. Electronic circuits, PLCs, relays or contactors can be activated directly with inductive sensors. The current change in the oscillator is caused without contact by the approach of the actuating material to the active area. The damping of the oscillator is possible between the active surface and specified maximum sensing distance (Sn) + 10 %. No mechanical force is exerted on the actuating material in the process, and no magnetic effect is caused by the high-frequency alternating field. The components of the IAS are mounted in plastic or metal casings and encapsulated with epoxy casting resin. The plastics used for the housings are: ! ! ! ! ! PVC (polyvinylchloride) PA (polyamide) 6.6 glass-fibre reinforced PC (polycarbonate) PTFE (polytetrafluor ethylene) PEEK (polyetheretherketone)

By means of the following measures all devices are insensitive to dirt, vibration (vibration stability: 30 g, 100...2000 Hz, 1 hour) and are watertight (depending on the type, up to IP 68). The choice of housings enables a wide range of applications, e.g. with aggressive media, in hot areas or in areas subjected to steam. Only pre-tested electronic components, proven integrated circuits and hybrid circuits are used and produced with SMT. The standard constant ambient temperature permitted is -25 up to +70C, and up to 90C for brief periods. High-temperature types for use from -200 up to +250C are also included in our general product line. With contactless detection no physical actuating force is required for operation. There is no contact bounce, no sensor wear, no maintenance and the service life is independent of the switching frequency. IAS can be used in machines, systems and vehicles as limit switches, contactless position switches for monitoring and positioning, as pulse generators for counting tasks, distance and speed measurements, and for many other applications (for application examples see page 11).

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

All specifications are subject to change without notice. (07/2004)

And the metal housings are ! brass / chrome or nickel-plated ! VA stainless-steel, material No. 1.4301 or No. 1.4305. ! Aluminium die-cast

TECHNOLOGY
Wiring of the inductive sensors should be routed separately or screened from heavy conductor lines, as in extreme cases inductive peak voltages can destroy the sensors despite the integrated protective circuit. Screened cable or twisted lines are recommended, especially for longer cable runs > 5 m. Direct control of electric light bulbs is to be avoided, because during the switch-on moment cold current is many times the rated current and can destroy the output stage of the sensor.

Units with strong local fields, e. g. high power walkie-talkies, or noise sources in the lower frequency range, e.g. long, middle or short wave transmitters should not be operated close to the sensors or additional measures have to be taken in order to eliminate their maloperation.

2- and 3-wire sensors with binary output can be used in series or parallel connection, similar to mechanical contacts. The type-typical voltage drop and the residual voltage Ud , which must be multiplied in accordance with the number of sensors for series connection, must be noted. In the case of parallel connection of sensors with thyristor output, the first switched output takes over the total load current.

Series connection

Parallel connection
2 wire AC/DC

3 wire DC NPN
All specifications are subject to change without notice. (05/2004)

3 wire DC PNP

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

ADJUSTMENT
Analog inductive sensors are equipped with a 20-turn spindle potentiometer. This allows adjustment of an application specific operating range between the minimum distance 0 mm and the type-typical maximum value. Consequently, the full output current range (4...20 mA) is always present, regardless of the required measuring distance. The analog sensors of series 10 are designed with a 2-colour LED that facilitates adjustment. Outside the operating range IA < 4 mA and IA > 20 mA green light is emitted to display operational readiness. Within the operating range of 4...20 mA the LED is yellow. In the undamped state the output current value is > 20 mA and moves with the reduction of the object distance toward 4 mA (value at total damping approx. 2.5 mA).

The data of the nominal sensing distance are based on the measuring method according to DIN VDE 0660, Part 208. The respective nominal sensing distance is indicated with a tolerance of + 10 %. The standard measurement plate is square with a thickness of 1 mm and is made of carbon steel FE 360 (defined in ISO 630: 1980 ) with a smoothed surface and earthed. The side lengths are equal to the diameter of the active area of the IAS or equal to 3 x Sn, depending on which value is greater. With a different material or a smaller surface of the actuating element, the sensing distance is smaller

Sensing distance

Adjustment of the sensing distance of the inductive analogue sensors is made by means of a spindle potentiometer with the screwdriver provided.

Typical response-time characteristic

The possible sensing distance on a particular metal can be worked out by means of the typical reduction factors: Sensing distance = Sn x reduction factor.

Metal type: Reduction factor approx.

F E 360

S t 37

CrNi

V 2A

V 4A

0.85

0.75

0.7

0.45

0.4

0.3

0.24

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

All specifications are subject to change without notice. (05/2004)

For size M30x1.5 / 30: First open plastic tab. For size > M30x1.5 / 30: First remove plastic sealing screw.

TYPICAL CURVES

B A = IAS 10-A13-IL B = IAS-10-A14-IL

Parameter: Tu = 25 C, UB = 24 V DC Actuator: Stainless steel St 37, 1 mm thick, square, side length equal to the diameter of the active area.

Typical curves of flush mountable analogue sensors

D C = IAS 10-A23-IL D = IAS-10-A24-IL

Parameter: Tu = 25 C, UB = 24 V DC Actuator: Stainless steel St 37, 1 mm thick, square, side length equal to the diameter of the active area.
All specifications are subject to change without notice. (05/2004)

Typical curves of non-flush mountable analogue sensors

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

MOUNTING
There are two different types of inductive sensors: 1. For flush mounting in metal and other materials. These sensors can also be mounted close together (see Fig. 1 and 3). 2. For non-flush mounting in metal. However, these types can also be mounted flush in nonmetals. When mounting two or more sensors side by side a space / free zone must be provided (see Fig. 2 and 4).

Mounting
Fig.1
FREE ZONE no damping material

Fig.2

Fig.3

The dimension e corresponds to the threadfree area of standard sensor types (-A21-...). Otherwise e is 7 mm.

Fig.4

For opposing active areas a 2,2 x Sn

All specifications are subject to change without notice. (05/2004)

For non-flush mountable Sensors distance b has to be 1,5 x Sn.

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

MOUNTING
The material and version-dependent maximum torque should be taken into consideration in order to prevent damage to the threaded sleeves when mounting. The values listed in the table are based on the use of the nuts supplied with the sensors.

Housing Material
Thread
M 5 x 0.5 M8x1 M 12 x 1 M 18 x 1 M 22 x 1.5 M 30 x 1.5 M 32 x 1.5

PVC
1.5 Nm 12 Nm -

PA 6.6
1 Nm 1.7 Nm 6 Nm 8 Nm 13 Nm

P TFE
0.2 Nm 0.5 Nm 1.4 Nm 2.5 Nm 3 Nm

Brass
16 Nm 28 Nm 32 Nm 82 Nm 150 Nm

Stainless Steel
1.5 Nm 4.5 Nm 25 Nm 60 Nm 84 Nm 200 Nm 230 Nm

Due to the permitted thread tolerances specified in German standard DIN 13, the maximum screw-in length for threaded sensors should be taken into consideration. Depending on that the length of the threaded block for screwing in proximity sensors should not exceed the following dimensions. In the case of larger threaded blocks we recommend drilling a blind hole in order to adhere to the maximum screw-in length.

Thread: Screw -in length max.

M 5 x 0.5

M8x1

M 12 x 1

M18 x 1

M 22 x 1.5

M 30 x 1.5

M 32 x 1.5

All specifications are subject to change without notice. (05/2004)

3 mm

6 mm

8 mm

12 mm

TECHNICAL TERMS
Unless otherwise specified technical data is as follows: +24C, UB = 8 V DC for IAS-30; UB = 24 V DC for IAS-10 and IAS-20 and UB = 230 V AC for IAS-60. Operating sensing distance / Sa Within the operating sensing distance the sensor operates reliably taking in to account all the possible tolerances. It lies between 0 and 0.81 x Sn. Power up time delay The time the sensor needs to be ready for operation after connecting the operating voltage. It is in the milliseconds range.

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

TECHNICAL TERMS
Housing materials The application of the housing materials used is based on the technical specifications of the material and of the manufacturer. Even though RECHNER Sensors have far-reaching application experience concerning the use of different housing materials, the customer is responsible for checking in each case that the housing material is suitable for the application. Cable For the standard models PVC- or PUR-cable are used. One has to take into consideration that the cable should not be moved with ambient temperatures below 5C. PVC is not suitable for use in applications with oil-based liquids or with UV-radiation. PUR is not suitable for continuous contact with water. For special application areas silicone or PTFE cables are available. Nominal sensing distance / Sn The characteristic value of a proximity sensor, without consideration of production tolerances and variations due to temperature and voltages. Real sensing distance / Sr The sensing distance determined at +20 C and rated voltage. Here the series variance is taken into consideration. Variation max. + 10 %. Reduction factors The reduction factors, as shown in the table on page 6, should be taken into consideration, for metals other than FE 360 or ST 37. Series- and parallel connection It is possible to connect the proximity sensors in series or parallel. When considering this it must be taken into account that the voltage drops are added for series connection and the residual voltages for parallel connection. Under these circumstances it is advisable to operate a maximum of three sensors in a corresponding circuit. Repeat accuracy of the switching point The variation of the switching point of two successive measurements at constant ambient conditions. Frequency of operating cycles The maximum damping and un-damping cycles of the proximity sensor within one second. To ascertain the frequency of operating cycles a pulse / break ratio of 1 : 2 is used as a basis, at Sn . Switching hysteresis The difference between the switch-on and switch-off point of a proximity sensor, when approaching or moving away from the standard measuring plate. It is < 20% of the real sensing distance. Enclosure rating IP 65: Protection against contact with voltage-carrying parts, protection against ingress of dust and water jet. IP 67: Protection against contact with voltage-carrying parts, protection against ingress of dust and protection against ingress of water when the equipment is immersed in water, up to 1 m depths and for a period of 30 minutes. Temperature variation The displacement of the switching point if the ambient temperature changes.

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

All specifications are subject to change without notice. (05/2004)

APPLICATION EXAMPLES

Fig. 1:

Inductive level control within a plastic container at a by-pass, by means of a metal float

Fig. 2: Position aid for transported tins

Fig. 3:

Detection of a gear wheel or cam wheel

Fig. 4: Counting of metal containers

All specifications are subject to change without notice. (05/2004)

Fig. 5:

Position aid for the gripper of industrial robots

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

SERIES
The series 10 contains inductive 3-wire proximity sensors with digital output pnp with NO or NC-function. Electronic circuits, PLCs, relays and our power supplies of series 130 can be directly activated. Analog sensors with 4...20 mA output are also available. The operating range of these analog sensors is adjustable by means of a potentiometer and they can be actuated by analog interfaces with internal resistance Ri < 300 ohm. The sensors are reverse polarity protected, overload protected and have electronic shortcircuit protection. StEx-Sensors for use in Zone 20 with ATEX-certificate complete this series. The series 20 contains inductive 3-wire proximity sensors with digital output npn with NO or NC-function. Electronic circuits, PLCs, relays and our power supplies of series 130 can be directly activated. The sensors are reverse-polarity protected, overload-protected and have electronic short-circuit protection. StEx-Sensors for use in Zone 20 with ATEX-certificate complete this series. The series 30 contains inductive 2-wire proximity signal generators according to NAMUR DIN 60947-5-6 These sensors can be mounted in explosion hazardous areas when they are connected to approved isolating switching amplifiers with intrinsically safe control circuits. [EExia] or [EExib], our series N-131... Depending on which isolating switching amplifier is used the NAMUR-sensors of this series can be used up to zone 1. The data specified in the certificate of conformity of the isolating switching amplifier used must be taken into consideration. StEx-Sensors for use in Zone 20 with ATEX-certificate complete this series. The series 60 contains inductive 2-wire AC/DC proximity sensors with digital output with NO and NC function. AC/DC relays, conductors, solenoid valves can be activated directly. PLCs with AC inputs can also be connected if the minimum load current is taken into consideration. The sensors have a protective circuit against high induction voltages. For increased requirements for the permitted ambient temperature range of our inductive proximity sensors, we offer the series up to +100C with integrated electronic as a 3-Wire DC version. The sensors are available with housings made of PTFE, PTFE/VA or PTFE/brass and have a silicone connection cable. For extreme ambient or product-temperature conditions, our high temperature sensors up to +250C are available with external electronics. The sensors are integrated in PEEK, PTFE, PEEK/VA or PTFE/VA housings. For the rectangular sensors housings in PEEK/aluminium are used. The FEP-coated sensor cable with VA grid screening, in the lengths 2, 5 or 10 m, is the connection to the evaluation unit and may also be used under high-temperature conditions. The evaluation unit is connected to the sensor by means of a plug-in connector. On the sensor side the cable is permanently cast in or equipped with a temperatureresistant plug-in connector (...Y-version). The sensing distance for high temperature sensors can be adjusted on the evaluation unit and the switching state is displayed by an LED. The sensing distance adjustment should be made at operating temperature. Here the maximum specified sensing distance and the temperature drift must be taken into consideration.

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

All specifications are subject to change without notice. (05/2004)

TYPE CODE IAS-...-...-...-...-...-...-...

= with flange connector if existing e. g. 100C,... = higher temperature range 3D = with manufacturer certificate according to ATEX StEx = StEx according to ATEX if existing Y...

if existing e. g. PTFE, PTFE/Ms,... if existing M... K A IL N S A... (M).../... C NPN, PNP 04, 6.5, 40, ... = = = = =

housing material

= =

thread size plastic housing

Antivalent function (NO/NC) Analogue function NAMUR NC NO = = = = = European standard Thread Rectangular housing Output function Version

10 20 30 60

= = = =

3-wire/4-wire DC PNP/ 3-wire analogue 3-wire/4-wire DC NPN NAMUR DIN 60947-5-6 2-wire AC/DC

AC/DC metal version have an earth wire. Pluggabel version have an additional pin.

=
All specifications are subject to change without notice. (05/2004)

Inductive Proximity Sensor

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

All specifications are subject to change without notice. (05/2004)

CYLINDRICAL HOUSINGS

I T E M

Sensing distance [mm] Operating range analogue [m m ]

Diameter [mm] or with thread

Housing material DC

Electrical Version AC/DC 20...250 V AC/DC [60]

Connection

P ag es

10...35 V Brass [Ms] Stainless steel [VA] Polyamide [PA] Polyvinylchloride [PVC] NPN [20] PNP [10]

Cable, Connector Cable Connector [Y..] . Y7 = Metal M8 x 1 Y3 = Plastic M12 x 1 Y5 = Metal M12 x 1

Selection NO (S), NC () and Antivalent (A with 10, 20 only) see data sheet DC 10...30 VDC

flush 1 2 3 0.8 0.8 1.5 1 4 1.5 5 2 6 5 7 0...5 8 9 10 10 10 0...10 11 12 13 20 -

non-flush 2 5 4 5 8 M18 x 1 - A13/A23 0...8 10 15 M30 x 1.5 - A14/A24 0...15 25 40 40 50 60 PA PA PA Brass M22 x 1.5 30 PA Brass Brass 4 M5 x 0.5 6.5 M8 x 1 - A11/A21 VA M8 x 1 11 M12 x 1 - A12/A22 M12 x 1 PA VA, Brass/PVC PVC VA VA VA

Analogue [IL] 10, 20 10, 20 10, 20 10, 20 10 10 10, 20, 60 60 Cable Cable, Y7 Cable, Y7 Cable 22-25 Cable, Y7 Cable Cable, Y5 Cable 26 27-32 33 16 17-18 19-21

10, 20, 60, IL

Cable, Y3, Y5

34-42

10 20

Cable Cable

43 44

All specifications are subject to change without notice. (05/2004)

10, 20, 60, IL

Cable, Y3

45-52

10, 60 10, 20 10

Cable Cable Cable

53-54 55 56

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 20 - NPN Series 10 - PNP Housing = 4 mm Housing material: stainless steel VA Flush mountable Sensing distance Sn = 0.8 mm
Certificate:

Technical data Operating distance Sn [mm], flush mounting 0.8, yes 0.8, yes

Electrical version Output Type NPN Art.-No. Connection diagram No.

3-wire DC NO IAS-20-04-S 213 610 1

3-wire DC NC IAS-20-04- 213 650 2

IAS-10-04-S 113 610 4 10...35 V DC 150 mA < 3.5 V 5% typ. 10 mA 2 kHz -25...+70C red built-in IP 67 2m 3 x 0.14 mm2 VA No. 1.4305 -

IAS-10-04- 113 650 5 10...35 V DC 150 mA < 3.5 V 5% typ. 10 mA 2 kHz -25...+70C red built-in IP 67 2m 3 x 0.14 mm2 VA No. 1.4305 All specifications are subject to change without notice. (05/2004)

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 20 - NPN Series 10 - PNP Housing M5 x 0.5 Housing material: stainless steel VA Flush mountable Sensing distance Sn = 0.8 mm
Certificate:

Technical data Operating distance Sn [mm], flush mounting 0.8, yes 0.8, yes

Electrical version Output Type NPN Art.-No. Connection diagram No.

3-wire DC NO IAS-20-M5-S 214 010 1

3-wire DC NC IAS-20-M5- 214 110 2

IAS-10-M5-S 114 010 4 10...35 V DC 150 mA < 3.5 V 5% typ. 10 mA 2 kHz -25...+70C red built-in IP 67 2m 3 x 0.14 mm2 VA No. 1.4305 PA -

IAS-10-M5- 114 110 5 10...35 V DC 150 mA < 3.5 V 5% typ. 10 mA 2 kHz -25...+70C red built-in IP 67 2m 3 x 0.14 mm2 VA No. 1.4305 PA -

Protective circuit Degree of protection IEC 529 Connection cable Housing material Active surface Li d

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 10 - PNP Housing M5 x 0.5 Housing material: stainless steel VA Flush mountable Sensing distance Sn = 0.8 mm With metal flange connector M8 x 1
Certificate:

Technical data Operating distance Sn [mm], flush mounting 0.8, yes 0.8, yes

Electrical version Output Type NPN Art.-No. Connection diagram No.

3-pin DC NO

3-pin DC NC

IAS-10-M5-S-Y7 114 400 4 10...35 V DC 150 mA < 3.5 V 5% typ. 10 mA 1 kHz -25...+70C yellow built-in IP 67 metal flange connector M8 x 1 VA No. 1.4305 PA -

IAS-10-M5--Y7 114 450 5 10...35 V DC 150 mA < 3.5 V 5% typ. 10 mA 1 kHz -25...+70C yellow built-in IP 67 metal flange connector M8 x 1 VA No. 1.4305 PA -

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

All specifications are subject to change without notice. (05/2004)

Inductive Sensors Series 20 - NPN Series 10 - PNP Housing = 6.5 mm Housing material: stainless steel VA Flush mountable Sensing distance Sn = 1.5 mm
Certificate:

Technical data Operating distance Sn [mm], flush mounting 1.5, yes 1.5, yes

Electrical version Output Type NPN Art.-No. Connection diagram No.

3-wire DC NO IAS-20-6.5/15-S 214 500 1

3-wire DC NC

IAS-10-6.5/15-S 114 500 4 10...35 V DC 150 mA < 3.5 V 5% typ. 10 mA 1 kHz -25...+70C yellow built-in IP 67 2m 3 x 0.14 mm2 VA No. 1.4305 PVC -

IAS-10-6.5/15- 114 650 5 10...35 V DC 150 mA < 3.5 V 5% typ. 10 mA 1 kHz -25...+70C yellow built-in IP 67 2m 3 x 0.14 mm2 VA No. 1.4305 PVC -

All specifications are subject to change without notice. (05/2004)

Protective circuit Degree of protection IEC 529 Connection cable Housing material Active surface Li d

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 10 - PNP Housing = 6.5 mm Housing material: stainless steel VA Flush mountable Sensing distance Sn = 1.5 mm
Certificate:

Technical data Operating distance Sn [mm], flush mounting 1.5, yes 1.5, yes

Electrical version Output Type NPN Art.-No. Connection diagram No.

3-wire DC NO

3-wire DC NC

IAS-10-6.5-S-LED 114 510 4 10...35 V DC 150 mA < 3.5 V 5% typ. 10 mA 1 kHz -25...+70C yellow built-in IP 67 2m 3 x 0.14 mm2 VA No. 1.4305 PVC -

IAS-10-6.5--LED 114 610 5 10...35 V DC 150 mA < 3.5 V 5% typ. 10 mA 1 kHz -25...+70C yellow built-in IP 67 2m 3 x 0.14 mm2 VA No. 1.4305 PVC All specifications are subject to change without notice. (05/2004)

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 10 - PNP Housing = 6.5 mm Housing material: stainless steel VA Flush mountable Sensing distance Sn = 1.5 mm With metal flange connector M8 x 1
Certificate:

Technical data Operating distance Sn [mm], flush mounting 1.5, yes 1.5, yes

Electrical version Output Type NPN Art.-No. Connection diagram No.

3-pin DC NO

3-pin DC NC

IAS-10-6.5-S-Y7 114 900 4 10...35 V DC 150 mA < 3.5 V 5% typ. 10 mA 1 kHz -25...+70C yellow built-in IP 67 Metal flange connector M8 x 1 VA No. 1.4305 PVC -

IAS-10-6.5--Y7 115 000 5 10...35 V DC 150 mA < 3.5 V 5% typ. 10 mA 1 kHz -25...+70C yellow built-in IP 67 Metal flange connector M8 x 1 VA No. 1.4305 PVC -

Protective circuit Degree of protection IEC 529 Connection Housing material Active surface Li d

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 20 - NPN Series 10 - PNP Housing M8 x 1 Housing material: stainless steel VA Flush mountable Sensing distance Sn = 1 mm
Certificate:
Technical data Operating distance Sn [mm], flush mounting Electrical version Output Type NPN Art.-No. Connection diagram No. Type PNP Art.-No. Connection diagram No. Operating voltage (UB) Output current max. (Ie) Load current min. Voltage drop max. (Ud) Permitted residual ripple max. No-load current (Io) Frequency of operating cycles max. Permitted ambient temperature LED-display Protective circuit Degree of protection IEC 529 Connection cable Housing material Active surface Li d 1, yes 3-wire DC NO IAS-20-A11-S 200 500 1 IAS-10-A11-S 100 500 4 10...35 V DC 150 mA < 3.5 V 5% typ. 10 mA 1 kHz -25...+70C yellow built-in IP 67 2m 3 x 0.14 mm2 VA No. 1.4305 PVC PC IAS-10-A11- 101 010 5 10...35 V DC 150 mA < 3.5 V 5% typ. 10 mA 1 kHz -25...+70C yellow built-in IP 67 2m 3 x 0.14 mm2 VA No. 1.4305 PVC PC 1, yes 3-wire DC NC

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

All specifications are subject to change without notice. (07/2004)

Inductive Sensors Series 10 - PNP Housing M8 x 1 Housing material: stainless steel VA Flush mountable Sensing distance Sn = 1.5 mm
Certificate:
Technical data Operating distance Sn [mm], flush mounting Electrical version Output Type NPN Art.-No. Connection diagram No. Type PNP Art.-No. Connection diagram No. Operating voltage (UB) Output current max. (Ie) Load current min. Voltage drop max. (Ud) Permitted residual ripple max. No-load current (Io) Frequency of operating cycles max. Permitted ambient temperature LED-display IAS-10-M8-S 100 110 4 10...35 V DC 150 mA < 3.5 V 5% typ. 10 mA 1 kHz -25...+70C yellow built-in IP 67 2m 3 x 0.14 mm2 VA No. 1.4305 PVC IAS-10-M8- 100 300 5 10...35 V DC 150 mA < 3.5 V 5% typ. 10 mA 1 kHz -25...+70C yellow built-in IP 67 2m 3 x 0.14 mm2 VA No. 1.4305 PVC 0.8, yes 3-wire NO DC 0.8, yes 3-wire DC NC

All specifications are subject to change without notice. (07/2004)

Protective circuit Degree of protection IEC 529 Connection cable Housing material Active surface Li d

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 10 - PNP Housing M8 x 1 Housing material: stainless steel VA Flush mountable Sensing distance Sn = 1.5 mm With metal flange connector M8 x 1
Certificate: Technical data Operating distance Sn [mm], flush Mounting Electrical version Output Type NPN Art.-No. Connection diagram No. Type PNP Art.-No. Connection diagram No. Operating voltage (UB) Output current max. (Ie) Load current min. Voltage drop max. (Ud) Permitted residual ripple max. No-load current (Io) Frequency of operating cycles max. Permitted ambient temperature LED-display Protective circuit Degree of protection IEC 529 Connection Housing material Active surface Li d IAS-10-M8-S-Y7 100 200 4 10...35 V DC 150 mA < 3.5 V 5% typ. 10 mA 1 kHz -25...+70C yellow built-in IP 67 metal flange connector M8 x 1 VA No. 1.4305 PVC IAS-10-M8--Y7 100 310 5 10...35 V DC 150 mA < 3.5 V 5% typ. 10 mA 1 kHz -25...+70C yellow built-in IP 67 metal flange connector M8 x 1 VA No. 1.4305 PVC All specifications are subject to change without notice. (07/2004)

1.5, yes 3-pin DC NO

1.5, yes 3-pin DC NC

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 20 - NPN Series 10 - PNP Housing M8 x 1 Housing material: stainless steel VA Non-flush mountable Sensing distance Sn = 2 mm
Certificate: Technical data Operating distance Sn [mm], flush mounting Electrical version Output Type NPN Art.-No. Connection diagram No. Type PNP Art.-No. Connection diagram No. Operating voltage (UB) Output current max. (Ie) Load current min. Voltage drop max. (Ud) Permitted residual ripple max. No-load current (Io) Frequency of operating cycles max. Permitted ambient temperature LED-display
All specifications are subject to change without notice. (07/2004)

2, no 3-wire DC NO IAS-20-A21-S 201 200 1 IAS-10-A21-S 101 200 4 10...35 V DC 150 mA < 3.5 V 5% typ. 10 mA 1 kHz -25...+70C yellow built-in IP 67 2m 3 x 0.14 mm2 VA No. 1.4305 PVC PC

2, no 3-wire DC NC

IAS-10-A21- 101 250 5 10...35 V DC 150 mA < 3.5 V 5% typ. 10 mA 1 kHz -25...+70C yellow built-in IP 67 2m 3 x 0.14 mm2 VA No. 1.4305 PVC PC

Protective circuit Degree of protection IEC 529 Connection cable Housing material Active surface Li d

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 10 - PNP Housing = 11 mm Housing material: PA Non-flush mountable Sensing distance Sn = 5 mm
Certificate:

Technical data Operating distance Sn [mm], flush mounting 5, no 5, no

Electrical version Output Type NPN Art.-No. Connection diagram No.

3-wire DC NO

3-wire DC NC

IAS-10-14-S 115 300 4 10...35 V DC 150 mA < 2.5 V 10 % typ. 15 mA 2 kHz -25...+70C yellow built-in IP 67 2m 3 x 0.14 mm2 PA PA PA

IAS-10-14- 115 350 5 10...35 V DC 150 mA < 2.5 V 10 % typ. 15 mA 2 kHz -25...+70C yellow built-in IP 67 2m 3 x 0.14 mm2 PA PA PA
All specifications are subject to change without notice. (05/2004)

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 20 - NPN Series 10 - PNP Housing M12 x 1 Housing material: stainless steel VA Flush mountable Sensing distance Sn = 2 mm
Certificate:

Technical data Operating distance Sn [mm], flush mounting 2, yes 2, yes

Electrical version Output Type NPN Art.-No. Connection diagram No.

3-wire DC NO IAS-20-A12-S 201 700 1

3-wire DC NC IAS-20-A12- 201 900 2

IAS-10-A12-S 101 700 4 10...35 V DC 150 mA < 2.5 V 10 % typ. 15 mA 2 kHz -25...+70C yellow built-in IP 67 2m 3 x 0.14 mm2 VA No. 1.4305 PA PA

IAS-10-A12- 101 900 5 10...35 V DC 150 mA < 2.5 V 10 % typ. 15 mA 2 kHz -25...+70C yellow built-in IP 67 2m 3 x 0.14 mm2 VA No. 1.4305 PA PA

Protective circuit Degree of protection IEC 529 Connection cable Housing material Active surface Li d

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 20 - NPN Series 10 - PNP Housing M12 x 1 Housing material: stainless steel VA Flush mountable Sensing distance Sn = 2 mm With metal flange connector M12 x 1
Certificate:

Technical data Operating distance Sn [mm], flush mounting 2, yes 2, yes

Electrical version Output Type NPN Art.-No. Connection diagram No.

3-pin DC NO IAS-20-A12-S-Y5 202 300 1

3-pin DC NC

IAS-10-A12-S-Y5 102 300 4 10...35 V DC 150 mA < 2.5 V 10 % typ. 15 mA 2 kHz -25...+70C yellow built-in IP 67 metal flange connector M12 x 1 VA No. 1.4305 PA -

IAS-10-A12--Y5 102 350 5 10...35 V DC 150 mA < 2.5 V 10 % typ. 15 mA 2 kHz -25...+70C yellow built-in IP 67 metal flange connector M12 x 1 VA No. 1.4305 PA All specifications are subject to change without notice. (05/2004)

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 60 - AC/DC

Housing M12 x 1 Housing material: brass/PVC Flush mountable Sensing distance Sn = 2 mm

Certificate:

Technical data Operating distance Sn [mm], flush mounting 2, yes 2, yes

Electrical version Output Type Art.-No. Connection diagram No. Operating voltage (UB) Ourtput current max. (Ie) Minimum load Voltage drop max. (Ud) Permitted residual ripple max. No-load current (Io) Frequency of operating cycles max. Permitted ambient temperature LED-display Protective circuit Degree of protection IEC 529 Connection cable
All specifications are subject to change without notice. (05/2004)

2-wire AC/DC NO IAS-60-A12-S 600 300 1 20...250 V AC/DC 300 mA typ. 9 mA typ. 6 V typ. 3.5 mA 25 Hz -25...+70C yellow built-in IP 67 2m 2 x 0.14 mm brass/PVC PA PA

2-wire AC/DC NC IAS-60-A12- 600 500 2 20...250 V AC/DC 300 mA typ. 9 mA typ. 6 V typ. 3.5 mA 25 Hz -25...+70C yellow built-in IP 67 2m 2 x 0.14 mm brass/PVC PA PA

Housing material Active surface Li d

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 20 - NPN Series 10 - PNP Housing M12 x 1 Housing material: stainless steel VA Non-flush mountable Sensing distance Sn = 4 mm
Certificate:

Technical data Operating distance Sn [mm], flush mounting 4, no 4, no

Electrical version Output Type NPN Art.-No. Connection diagram No.

3-wire DC NO IAS-20-A22-S 202 400 1

3-wire DC NC IAS-20-A22- 202 500 2

IAS-10-A22-S 102 400 4 10...35 V DC 150 mA < 2.5 V 10 % typ. 15 mA 2 kHz -25...+70C yellow built-in IP 67 2m 3 x 0.14 mm2 VA No. 1.4305 PA PA

IAS-10-A22- 102 500 5 10...35 V DC 150 mA < 2.5 V 10 % typ. 15 mA 2 kHz -25...+70C yellow built-in IP 67 2m 3 x 0.14 mm2 VA No. 1.4305 PA PA
All specifications are subject to change without notice. (05/2004)

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 20 - NPN Series 10 - PNP Housing M12 x 1 Housing material: stainless steel VA Non-flush mountable Sensing distance Sn = 4 mm With metal flange connector M12 x 1
Certificate:

Technical data Operating distance Sn [mm], flush mounting 4 , no 4, no

Electrical version Output Type NPN Art.-No. Connection diagram No.

3-pin DC NO

3-pin DC NC IAS-20-A22--Y5 203 050 2

IAS-10-A22-S-Y5 103 001 4 10...35 V DC 150 mA < 2.5 V 10 % typ. 15 mA 2 kHz -25...+70C yellow built-in IP 67 metal flange connector M12 x 1 VA No. 1.4305 PA -

IAS-10-A22--Y5 103 050 5 10...35 V DC 150 mA < 2.5 V 10 % typ. 15 mA 2 kHz -25...+70C yellow built-in IP 67 metal flange connector M12 x 1 VA No. 1.4305 PA -

Protective circuit Degree of protection IEC 529 Connection Housing material Active surface Li d

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 60 - AC/DC

Housing M12 x 1 Housing material: brass/PVC Non-flush mountable Sensing distance Sn = 4 mm

Certificate:

Technical data Operating distance Sn [mm], flush mounting 4, no 4, no

2-wire AC/DC NO IAS-60-A22-S 600 700 1 20...250 V AC/DC 300 mA typ. 9 mA typ. 6 V typ. 3.5 mA 25 Hz -25...+70C yellow built-in IP 67 2m 2 x 0.14 mm brass/PVC PA PA

2-wire AC/DC NC IAS-60-A22- 600 900 2 20...250 V AC/DC 300 mA typ. 9 mA typ. 6 V typ. 3.5 mA 25 Hz -25...+70C yellow built-in IP 67 2m 2 x 0.14 mm
All specifications are subject to change without notice. (05/2004)

brass/PVC PA PA

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 60 - AC/DC

Housing M12 x 1 Housing material: PVC Non-flush mountable Sensing distance Sn = 5 mm

Certificate:

Technical data Operating distance Sn [mm], flush mounting 5, no

2-wire AC/DC NO IAS-60-14-S-M12 614 900 1 20...250 V AC/DC 300 mA typ. 9 mA typ. 6 V typ. 3.5 mA 25 Hz -25...+70C yellow built-in IP 67 2m 2 x 0.14 mm PVC PVC PA

All specifications are subject to change without notice. (05/2004)

Housing material Active surface Li d

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 20 - NPN Series 10 - PNP Housing M18 x 1 Housing material: brass Flush mountable Sensing distance Sn = 5 mm
Certificate:

Technical data Operating distance Sn [mm], flush mounting 5, yes 5, yes 5, yes

Electrical version Output Type NPN Art.-No. Connection diagram No.

3-wire DC NO IAS-20-A13-S 203 100 1

3-wire DC NC

4-wire DC Antivalent IAS-20-A13-A 203 060 3

IAS-10-A13-S 103 100 4 10...35 V DC 250 mA < 2.5 V 10 % typ. 15 mA 2 kHz -25...+70C yellow built-in IP 67 2m 3 x 0.34 mm2 brass PA PA

IAS-10-A13- 103 200 5 10...35 V DC 250 mA < 2.5 V 10 % typ. 15 mA 2 kHz -25...+70C yellow built-in IP 67 2m 3 x 0.34 mm2 brass PA PA

IAS-10-A13-A 103 060 6 10...35 V DC 2 x 250 mA < 2.5 V 10 % typ. 15 mA 2 kHz -25...+70C green/yellow built-in IP 67 2m 4 x 0.34 mm2 brass PA PA
All specifications are subject to change without notice. (05/2004)

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors With Analogue Output Series 10 - IL Housing M18 x 1 Housing material: brass Flush mountable Operating range 0...5 mm adjustable
Certificate:

Technical data Operating range [mm], flush mounting Linear range [mm] Electrical version Output function Type analogue Art.-No. Connection diagram No. Operating voltage (UB) Output current max. (Ie) Permitted residual ripple max. No-load current (Io) Output current active surface free Output current active surface covered Load resistor Permitted ambient temperature LED-display Protective circuit Degree of protection IEC 529 Connection cable
All specifications are subject to change without notice. (05/2004)

0...5, yes 1.5...5 3-wire DC

analogue IAS-10-A13-IL 105 750 see below 15...30 V DC 2,5...> 20 mA 5% typ. 40 mA > 20 mA < 20...< 4 mA RL = 0...300 Ohm 0...+60C green/yellow/green built-in IP 67 2m 3 x 0.34 mm2 brass PTFE PA

Housing material Active surface Li d

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 20 - NPN Series 10 - PNP Housing M18 x 1 Housing material: brass Flush mountable Sensing distance Sn = 5 mm With metal flange connector M12 x 1
Certificate: Technical data Operating distance Sn [mm], flush mounting Electrical version Output Type NPN Art.-No. Connection diagram No. Type PNP Art.-No. Connection diagram No. Operating voltage (UB) Output current max. (Ie) Load current min. Voltage drop max. (Ud) Permitted residual ripple max. No-load current (Io) Frequency of operating cycles max. Permitted ambient temperature LED-display Protective circuit Degree of protection IEC 529 Connection Housing material Active surface Li d 5, yes 4-pin DC Antivalent IAS-20-A13-A-Y5 203 067 3 IAS-10-A13-A-Y5 103 068 6 10...35 V DC 2 x 250 mA < 2.5 V 10 % typ. 15 mA 2 kHz -25...+70C yellow built-in IP 67 metal flange connector M12 x 1 brass PA All specifications are subject to change without notice. (08/2004)

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors With Analogue Output Series 10 - IL Housing M18 x 1 Housing material: brass Flush mountable Operating range 0...5 mm adjustable With plastic flange connector M12 x 1
Certificate:

Technical data Operating range [mm], flush mounting Linear range [mm] Electrical version Output function Type analogue Art.-No. Connection diagram No. Operating voltage (UB) Output current max. (Ie) Permitted residual ripple max. No-load current (Io) Output current active surface free Output current active surface covered Load resistor Permitted ambient temperature LED-display Protective circuit Degree of protection IEC 529 Connection
All specifications are subject to change without notice. (07/2004)

0...5, yes 1.5...5 3-wire DC analogue IAS-10-A13-IL-Y3 105 751 see below 15...30 V DC 2,5...> 20 mA 5% typ. 40 mA > 20 mA < 20...< 4 mA RL = 0...300 Ohm 0...+60C green/yellow/green built-in IP 67 plastic flange connector M12 x 1 brass PTFE -

Housing material Active surface Li d

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 60 - AC/DC

Housing M18 x 1 Housing material: brass Flush mountable Sensing distance Sn = 5 mm

Certificate:

Technical data Operating distance Sn [mm], flush mounting 5, yes 5, yes

3-wire AC/DC NO IAS-60-A13-S 601 000 1 20...250 V AC/DC 300 mA typ. 9 mA typ. 6 V typ. 3.5 mA 25 Hz -25...+70C yellow built-in IP 67 2m 3 x 0.34 mm brass PA PA

3-wire AC/DC NC IAS-60-A13- 601 200 2 20...250 V AC/DC 300 mA typ. 9 mA typ. 6 V typ. 3.5 mA 25 Hz -25...+70C yellow built-in IP 67 2m 3 x 0.34 mm
All specifications are subject to change without notice. (05/2004)

brass PA PA

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 20 - NPN Series 10 - PNP Housing M18 x 1 Housing material: brass Non-flush mountable Sensing distance Sn = 8 mm
Certificate:

Technical data Operating distance Sn [mm], flush mounting 8, no 8, no

Electrical version Output Type NPN Art.-No. Connection diagram No.

3-wire DC NO IAS-20-A23-S 205 800 1

4-wire DC Antivalent IAS-20-A23-A 205 780 3

IAS-10-A23-S 105 800 4 10...35 V DC 250 mA < 2.5 V 10 % typ. 15 mA 2 kHz -25...+70C yellow built-in IP 67 2m 3 x 0.34 mm2 brass PA PA

IAS-10-A23-A 105 780 6 10...35 V DC 2 x 250 mA < 2.5 V 10 % typ. 15 mA 2 kHz -25...+70C green/yellow built- in IP 67 2m 4 x 0.34 mm2 brass PA PA

Protective circuit Degree of protection IEC 529 Connection cable Housing material Active surface Li d

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors With Analogue Output Series 10 - IL Housing M18 x 1 Housing material: brass Non-flush mountable Operating range 0...8 mm adjustable
Certificate:

Technical data Operating range [mm], flush mounting Linear range [mm] Electrical version Output function Type analogue Art.-No. Connection diagram No. Operating voltage (UB) Output current max. (Ie) Permitted residual ripple max. No-load current (Io) Output current active surface free Output current active surface covered Load resistor Permitted ambient temperature LED-display Protective circuit Degree of protection IEC 529 Connection cable Housing material Active surface Li d 0...8, no 3...8 3-wire DC

analogue IAS-10-A23-IL 108 350 see below 15...30 V DC 2,5...> 20 mA 5% typ. 40 mA > 20 mA < 20...< 4 mA RL = 0...300 Ohm 0...+60C green/yellow/green built-in IP 67 2m 3 x 0.34 mm2
All specifications are subject to change without notice. (05/2004)

brass PTFE PA

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 20 - NPN Series 10 - PNP Housing M18 x 1 Housing material: brass Non-flush mountable Sensing distance Sn = 8 mm With plastic flange connector M12 x 1
Certificate:

Technical data Operating distance Sn [mm], flush mounting 8, no 8, no

Electrical version Output Type NPN Art.-No. Connection diagram No.

3-pin DC NO

4-pin DC Antivalent IAS-20-A23-A-Y3 205 785 3

IAS-10-A23-S-Y3 106 600 4 10...35 V DC 250 mA < 2.5 V 10 % typ. 15 mA 2 kHz -25...+70C yellow built-in IP 67 plastic flange connector M12 x 1 brass PA -

IAS-10-A23-A-Y3 105 785 6 10...35 V DC 2 x 250 mA < 2.5 V 10 % typ. 15 mA 2 kHz -25...+70C yellow built-in IP 67 plastic flange connector M12 x 1 brass PA -

Protective circuit Degree of protection IEC 529 Connection Housing material Active surface Li d

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 60 - AC/DC

Housing M18 x 1 Housing material: brass Non-flush mountable Sensing distance Sn = 8 mm

Certificate:

Technical data Operating distance Sn [mm], flush Mounting 8, no 8, no

3-wire AC/DC NO IAS-60-A23-S 604 100 1 20...250 V AC/DC 300 mA typ. 9 mA typ. 6 V typ. 3.5 mA 25 Hz -25...+70C yellow built-in IP 67 2m 3 x 0.34 mm brass PA PA

3-wire AC/DC NC IAS-60-A23- 604 300 2 20...250 V AC/DC 300 mA typ. 9 mA typ. 6 V typ. 3.5 mA 25 Hz -25...+70C yellow built-in IP 67 2m 3 x 0.34 mm
All specifications are subject to change without notice. (05/2004)

brass PA PA

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 10 - PNP Housing M22 x 1.5 Housing material: PA Non-flush mountable Sensing distance Sn = 10 mm
Certificate:

Technical data Operating distance Sn [mm], flush mounting 10, no 10, no

Electrical version Output Type NPN Art.-No. Connection diagram No.

3-wire DC NO

3-wire DC NC

IAS-10-23-S-M22 116 900 4 10...35 V DC 250 mA < 2.5 V 10 % typ. 15 mA 2 kHz -25...+70C yellow built-in IP 67 2m 3 x 0.34 mm2 PA PA PA

IAS-10-23--M22 117 000 5 10...35 V DC 250 mA < 2.5 V 10 % typ. 15 mA 2 kHz -25...+70C yellow built-in IP 67 2m 3 x 0.34 mm2 PA PA PA

Protective circuit Degree of protection IEC 529 Connection cable Housing material Active surface Li d

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 20 - NPN

Housing = 30 mm Housing material: brass Flush mountable Sensing distance Sn = 10 mm

Certificate:

Technical data Operating distance Sn [mm], flush mounting 10, yes

Electrical version Output Type NPN Art.-No. Connection diagram No.

3-wire DC NO IAS-20-30-S 217 300 1

Type PNP Art.-No. Connection diagram No. Operating voltage (UB) Output current max. (Ie) Load current min. Voltage drop max. (Ud) Permitted residual ripple max. No-load current (Io) Frequency of operating cycles max. Permitted ambient temperature LED-display Protective circuit Degree of protection IEC 529 Connection cable Housing material Active surface Li d 10...35 V DC 250 mA < 2.5 V 10 % typ. 15 mA 1 kHz -25...+70C yellow built-in IP 67 2m 3 x 0.75 mm2 brass PA PA
All specifications are subject to change without notice. (05/2004)

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 10 - PNP Series 20 - NPN Housing M30 x 1.5 Housing material: brass Flush mountable Sensing distance Sn = 10 mm
Certificate:

Technical data Operating distance Sn [mm], flush mounting 10, yes 10, yes

Electrical version Output Type NPN Art.-No. Connection diagram No.

3-wire DC NO IAS-20-A14-S 208 400 1

4-wire DC Antivalent IAS-20-A14-A 208 380 3

IAS-10-A14-S 108 400 4 10...35 V DC 250 mA < 2.5 V 10 % typ. 15 mA 1 kHz -25...+70C yellow built-in IP 67 2m 3 x 0.75 mm2 brass PVC PA

IAS-10-A14-A 108 380 6 10...35 V DC 2 x 250 mA < 2.5 V 10 % typ. 15 mA 1 kHz -25...+70C green/yellow built-in IP 67 2m 4 x 0.5 mm2 brass PVC PA

Protective circuit Degree of protection IEC 529 Connection cable Housing material Active surface Li d

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 10 - PNP Series 20 - NPN Housing M30 x 1.5 Housing material: brass Flush mountable Sensing distance Sn = 10 mm With plastic flange connector M12 x 1
Certificate:

Technical data Operating distance Sn [mm], flush mounting 10, yes 10, yes 10, yes

Electrical version Output Type NPN Art.-No. Connection diagram No.

3-pin DC NO

3-pin DC NC

4-pin DC Antivalent IAS-20-A14-A-Y3 208 385 3

IAS-10-A14-S-Y3 109 200 4 10...35 V DC 250 mA < 2.5 V 10 % typ. 15 mA 1 kHz -25...+70C yellow built-in IP 67 plastic flange connector M12 x 1 brass PVC -

IAS-10-A14--Y3 109 300 5 10...35 V DC 250 mA < 2.5 V 10 % typ. 15 mA 1 kHz -25...+70C yellow built-in IP 67 plastic flange connector M12 x 1 brass PVC -

IAS-10-A14-A-Y3 108 385 6 10...35 V DC 2 x 250 mA < 2.5 V 10 % typ. 15 mA 1 kHz -25...+70C green/yellow built-in IP 67 plastic flange connector M12 x 1 brass PVC All specifications are subject to change without notice. (05/2004)

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors With Analogue Output Series 10 - IL Housing M30 x 1.5 Housing material: brass Flush mountable Operating range 0...10 mm adjustable
Certificate:

0...10, yes 3...10 3-wire DC

analogue IAS-10-A14-IL 110 950 see below 15...30 V DC 2,5...> 20 mA 5% typ. 40 mA > 20 mA < 20...< 4 mA RL = 0...300 Ohm 0...+60C green/yellow/green built-in IP 67 2m 3 x 0.75 mm brass PTFE PA

Housing material Active surface Li d

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 60 - AC/DC

Housing M30 x 1.5 Housing material: brass Flush mountable Sensing distance Sn = 10 mm
Certificate:

Technical data Operating distance Sn [mm], flush Mounting 10, yes 10, yes

3-wire AC/DC NO IAS-60-A14 -S 607 300 1 20...250 V AC/DC 300 mA typ. 9 mA typ. 6 V typ. 3.5 mA 25 Hz -25...+70C yellow built-in IP 67 2m 3 x 0.75 mm brass PVC PA

3-wire AC/DC NC IAS-60-A14- 607 500 2 20...250 V AC/DC 300 mA typ. 9 mA typ. 6 V typ. 3.5 mA 25 Hz -25...+70C yellow built-in IP 67 2m 3 x 0.75 mm
All specifications are subject to change without notice. (05/2004)

brass PVC PA

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inducitve Sensors Series 20 - NPN Series 10 - PNP Housing M30 x 1.5 Housing material: brass Non-flush mountable Sensing distance Sn = 15 mm
Certificate:

Technical data Operating distance Sn [mm], flush mounting 15, no 15, no

Electrical version Output Type NPN Art.-No. Connection diagram No.

3-wire DC NO IAS-20-A24-S 211 000 1

4-wire DC Antivalent IAS-20-A24-A 210 980 3

IAS-10-A24-S 111 000 4 10...35 V DC 250 mA < 2.5 V 10 % typ. 15 mA 1 kHz -25...+70C yellow built-in IP 67 2m 3 x 0.75 mm2 brass PVC PA

IAS-10-A24-A 110 980 6 10...35 V DC 2 x 250 mA < 2.5 V 10 % typ. 15 mA 1 kHz -25...+70C green/yellow built-in IP 67 2m 4 x 0.5 mm2 brass PVC PA

Protective circuit Degree of protection IEC 529 Connection cable Housing material Active surface Li d

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 10 - PNP Series 20 - NPN Housing M30 x 1.5 Housing material: brass Non-flush mountable Sensing distance Sn = 15 mm With plastic flange connector M12 x 1
Certificate:

Technical data Operating distance Sn [mm], flush mounting 15, no 15, no

Electrical version Output Type NPN Art.-No. Connection diagram No.

3-pin DC NO

4-pin DC Antivalent IAS-20-A24-A-Y3 210 985 3

IAS-10-A24-S-Y3 111 800 4 10...35 V DC 250 mA < 2.5 V 10 % typ. 15 mA 1 kHz -25...+70C yellow built-in IP 67 plastic flange connector M12 x 1 brass PVC -

IAS-10-A24-A-Y3 110 985 6 10...35 V DC 2 x 250 mA < 2.5 V 10 % typ. 15 mA 1 kHz -25...+70C green/yellow built-in IP 67 plastic flange connector M12 x 1 brass PVC All specifications are subject to change without notice. (05/2004)

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors With Analogue Output Series 10 - IL Housing M30 x 1.5 Housing material: brass Non-flush mountable Operating range 0...15 mm adjustable
Certificate:

0...15, no 5...15 3-wire DC

analogue IAS-10-A24-IL 113 550 see below 15...30 V DC 2,5...> 20mA 5% typ. 40 mA > 20 mA < 20 ...< 4 mA RL = 0...300 Ohm 0...+60C green/yellow/green built-in IP 67 2m 3 x 0.75 mm brass PTFE PA

Housing material Active surface Li d

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 60 - AC/DC

Housing M30 x 1.5 Housing material: brass Non-flush mountable Sensing distance Sn = 15 mm
Certificate:

Technical data Operating distance Sn [mm], flush Mounting 15, no 15, no

3-wire AC/DC NO IAS-60-A24-S 610 500 1 20...250 V AC/DC 300 mA typ. 9 mA typ. 6 V typ. 3.5 mA 25 Hz -25...+70C yellow built-in IP 67 2m 3 x 0.75 mm brass PVC PA

3-wire AC/DC NC IAS-60-A24- 610 700 2 20...250 V AC/DC 300 mA typ. 9 mA typ. 6 V typ. 3.5 mA 25 Hz -25...+70C yellow built-in IP 67 2m 3 x 0.75 mm
All specifications are subject to change without notice. (05/2004)

brass PVC PA

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 10 - PNP Housing = 40 mm Housing material: PA Flush mountable Sensing distance Sn = 20 mm
Certificate:

Technical data Operating distance Sn [mm], flush mounting 20, yes

Electrical version Output Type NPN Art.-No. Connection diagram No.

4-wire DC Antivalent

IAS-10-40-A 119 480 6 10...35 V DC 2 x 250 mA < 2.5 V 10 % typ. 15 mA 250 Hz -25...+70C green/yellow built-in IP 67 2m 4 x 0.5 mm2 PA PA PA

Protective circuit Degree of protection IEC 529 Connection cable Housing material Active surface Li d

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 60 - AC/DC

Housing = 40 mm Housing material: PA Flush mountable Sensing distance Sn = 20 mm

Certificate:

Technical data Operating distance Sn [mm], flush Mounting 20, yes 20, yes

2-wire AC/DC NO IAS-60-40-S 620 900 1 20...250 V AC/DC 300 mA typ. 9 mA typ. 6 V typ. 3.5 mA 25 Hz -25...+70C yellow built-in IP 67 2m 2 x 0.75 mm PA PA PA

2-wire AC/DC NC IAS-60-40- 621 100 2 20...250 V AC/DC 300 mA typ. 9 mA typ. 6 V typ. 3.5 mA 25 Hz -25...+70C yellow built-in IP 67 2m 2 x 0.75 mm
All specifications are subject to change without notice. (05/2004)

PA PA PA

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 20 - NPN Series 10 - PNP Housing = 50 mm Housing material: PA Non-flush mountable Sensing distance Sn = 25 mm
Certificate:

Technical data Operating distance Sn [mm], flush mounting 25, no

Electrical version Output Type NPN Art.-No. Connection diagram No.

4-wire DC Antivalent IAS-20-51-A 219 880 3

IAS-10-51-A 119 880 6 10...35 V DC 2 x 250 mA < 2.5 V 10 % typ. 15 mA 250 Hz -25...+70C green/yellow built-in IP 67 2m 4 x 0.5 mm2 PA PA PA

Protective circuit Degree of protection IEC 529 Connection cable Housing material Active surface Li d

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 10 - PNP Housing = 64 mm Housing material: PA Non-flush mountable Sensing distance Sn = 40 mm
Certificate:

Technical data Operating distance Sn [mm], flush mounting 40, no

Electrical version Output Type NPN Art.-No. Connection diagram No.

4-wire DC Antivalent

IAS-10-62-A 120 153 6 10...35 V DC 2 x 250 mA < 2.5 V 10 % typ. 15 mA 250 Hz -25...+70C green/yellow built-in IP 67 2m 4 x 0.5 mm2 PA PA PA
All specifications are subject to change without notice. (05/2004)

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

ATEX/StEx SERIES 10/20

I T E M

Sensing distance [mm]

Diameter [mm] or with thread

Housing Material

Electrical Version DC 10...30 V II 1 D IP 67 T 101C II 2G EEx m II T4 DMT 01 ATEX E 157 NPN [20], PNP [10] Selection NO [S] and Antivalent [A] see data sheets

Connection

P ag es

brass stainless steel [VA]

Flush 1 2 3 2 5 10

Non-flush M12 x 1 - A12 M18 x 1 - A13 M30 x 1,5 - A24 [VA] brass brass 10, 20 10,20 10, 20 Cable Cable Cable 58 59 60

All specifications are subject to change without notice. (07/2004)

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 20 - NPN-StEx-ATEX Series 10 - PNP-StEx-ATEX Housing M12 x 1 II 1/2 D IP 67 T 101C For use in zone 20 II 2G EEx m II T4 Housing material: stainless steel VA Flush mountable Sensing distance Sn 2 mm
2, yes
4-wire DC
NO
IAS-20-A12-S-StEx
IA 0138
1
IAS-10-A12-S-StEx
IA 0111
4
10...30 V DC
150 mA
< 2.5 V
10 %
typ. 15 mA
2 kHz
-20...+90C
yellow
built-in
IP 67
2m 4 x 0.14 mm2
VA No. 1.4305 PTFE PC

Certificate: DMT 01 ATEX E 157 Technical data

Operating distance Sn [mm], flush mounting
Electrical version
Output
Type NPN
Art.-No.
Connection diagram No.
Type PNP
Art.-No.
Connection diagram No.
Operating voltage (UB)
Output current max. (Ie)
Load current min.
Voltage drop max. (Ud)
Permitted residual ripple max.
No-load current (Io)
Frequency of operating cycles max.
Permitted ambient temperature
LED-display
Protective circuit
Degree of protection IEC 529
Connection cable
Housing material Active surface Li d

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

All specifications are subject to change without notice. (07/2004)

Inductive Sensors Series 20 - NPN-StEx-ATEX Series 10 - PNP-StEx-ATEX Housing M18 x 1 II 1/2 D IP 67 T 101C For use in zone 20 II 2G EEx m II T4 Housing material: brass Flush mountable Sensing distance Sn 5 mm
5, yes

Certificate: DMT 01 ATEX E 157

Technical data Operating distance Sn [mm], flush mounting

Electrical version Output Type NPN Art.-No. Connection diagram No.

5-wire DC Antivalent IAS-20-A13-A-StEx IA 0136 3

IAS-10-A13-A-StEx IA 0110 6 10...30 V DC 2 x 200 mA < 2.5 V 10 % typ. 15 mA 2 kHz -20...+90C green/yellow built-in IP 67 2m 5 x 0.14 mm2 brass PTFE PC

Protective circuit Degree of protection IEC 529 Connection cable Housing material Active surface Li d

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 20 - NPN-StEx-ATEX Series 10 - PNP-StEx-ATEX Housing M30 x 1.5 II 1/2 D IP 67 T 101C For use in zone 20 II 2G EEx m II T4 Housing material: brass Flush mountable Sensing distance Sn 10 mm
10, yes

Certificate: DMT 01 ATEX E 157

Technical data Operating distance Sn [mm], flush mounting

Electrical version Output Type NPN Art.-No. Connection diagram No.

5-wire DC Antivalent IAS-20-A14-A-StEx IA 0137 3

IAS-10-A14-A-StEx IA 0109 6 10...30 V DC 2 x 200 mA < 2.5 V 10 % typ. 15 mA 1 kHz -20...+90C green/yellow built-in IP 67 2m 5 x 0.34 mm2 brass PTFE PC
All specifications are subject to change without notice. (05/2004)

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

ATEX AND ATEX/StEx SERIES 30 (NAMUR)

I T E M

Sensing distance [mm]

Diameter [mm] or with thread

Housing material

Electrical Version Ui = 15 V DC NAMUR [30]

Connection

P ag es

Brass [Ms] Stainless steel [VA] Polyamide [PA] flush non-flush 5 4 8 15 15 4 M5 x 0.5 6.5 M8 x 1 11 M12 x 1 - A12/A22 M18 x 1 - A13/A23 M30 x 1.5 - A14/A24 M32 x 1.5 VA VA VA VA PA Brass Brass Brass Brass, PA

DMT 03 ATEX E 048

1 2 3 4 5 6 7 8 9

0.8 0.8 1.5 1.5 2 5 10 10

30 30 30 30 30 30, 30-StEx 30, 30-StEx 30, 30-StEx 30, 30-StEx

Cable Cable Cable Cable Cable Cable Cable Cable Cable

62 63 64 65 66 67-68 69-70 71-72 73-74

All specifications are subject to change without notice. (07/2004)

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 30 - NAMUR Housing 4 mm II 2 G EEx ia IIC T1-T6 For use in areas where there is a risk of explosion Housing material: stainless steel VA Flush mountable Sensing distance Sn = 0.8 mm
0.8, yes

Certificate: DMT 03 ATEX E 048 Technical data Operating distance Sn [mm], flush mounting

Electrical version Output Type Art.-No. Connection diagram No. Operating voltage (UB) Output current active surface free Output current active surface covered Self-inductance (L) Self-capacitance (C) Permitted residual ripple max. Frequency of operating cycles max. Permitted ambient temperature LED-display

2-wire DC NAMUR DIN 60947-5-6 IAS-30-04-N 300 700 see below Ui = 15 V DC > typ. 2 mA < typ. 1.5 mA 2mH 250 nF 5% 500 Hz -25...+70C -

Degree of protection IEC 529 Connection cable Housing material Active surface Li d

IP 67 2m 2 x 0.14 mm2 All specifications are subject to change without notice. (07/2004)

VA No. 1.4305

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 30 - NAMUR Housing M5 x 0.5 II 2 G EEx ia IIC T1-T6 For use in areas where there is a risk of explosion Housing material: stainless steel VA Flush mountable Sensing distance Sn = 0.8 mm
0.8 , yes

Certificate: DMT 03 ATEX E 048 Technical data Operating distance Sn [mm], flush mounting

2-wire DC NAMUR DIN 60947-5-6 IAS-30-M5-N 300 800 see below Ui = 15 V DC > typ. 2 mA < typ. 1.5 mA 2mH 250 nF 5% 500 Hz -25...+70C -

Degree of protection IEC 529 Connection cable

All specifications are subject to change without notice. (08/2004)

IP 67 2m 2 x 0.14 mm2 VA No. 1.4305 PA -

Housing material Active surface Li d

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Serie 30 - NAMUR Housing 6.5 mm II 2 G EEx ia IIC T1-T6 For use in areas where there is a risk of explosion Housing material: stainless steel VA Flush mountable Sensing distance Sn = 1.5 mm
1.5 , yes

Certificate: DMT 03 ATEX E 048 Technical data Operating distance Sn [mm], flush mounting

2-wire DC NAMUR DIN 60947-5-6 IAS-30-6.5-N 300 900 see below Ui = 15 V DC > typ. 2 mA < typ. 1.5 mA 2mH 250 nF 5% 500 Hz -25...+70C -

Degree of protection IEC 529 Connection cable Housing material Active surface Li d

IP 67 2m 2 x 0.14 mm2 PVC PC

All specifications are subject to change without notice. (08/2004)

VA No. 1.4305

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 30 - NAMUR Housing M8 x 1 II 2 G EEx ia IIC T1-T6 For use in areas where there is a risk of explosion Housing material: stainless steel VA Flush mountable Sensing distance Sn = 1.5 mm
1.5, yes

Certificate: : DMT 03 ATEX E 048 Technical data Operating distance Sn [mm], flush mounting

2-wire DC NAMUR DIN 60947-5-6 IAS-30-M8-N 301 000 see below Ui = 15 V DC > typ. 2 mA < typ. 1.5 mA 2mH 250 nF 5% 500 Hz -25...+70C -

Degree of protection IEC 529 Connection cable

All specifications are subject to change without notice. (08/2004)

IP 67 2m 2 x 0.14 mm2 VA No. 1.4305 PVC PC

Housing material Active surface Li d

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 30 - NAMUR Housing 11 mm II 2 G EEx ia IIC T1-T6 For use in areas where there is a risk of explosion Housing material: PA Non-flush mountable Sensing distance Sn = 5 mm
5, no

Certificate: DMT 03 ATEX E 048 Technical data Operating distance Sn [mm], flush mounting

2-wire DC NAMUR DIN 60947-5-6 IAS-30-14-N 301 500 see below Ui = 15 V DC > typ. 2 mA < typ. 1.5 mA 2mH 250 nF 5% 1 kHz -25...+70C yellow

Degree of protection IEC 529 Connection cable Housing material Active surface Li d

IP 67 2m 2 x 0.14 mm2 PA PA
All specifications are subject to change without notice. (07/2004)

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 30 - NAMUR Housing M12 x 1 II 2 G EEx ia IIC T1-T6 II 1 D IP 67 T 101C For use in areas where there is a risk of explosion Flush mountable Sensing distance Sn = 2 mm
2, yes

Certificate: DMT 03 ATEX E 048 DMT 01 ATEX E 157

Technical data Operating distance Sn [mm], flush mounting

Electrical version Output Type Application/Marking

2-wire DC NAMUR DIN 60947-5-6 IAS-30-A12-N

3-wire DC IAS-30-A12-N-StEx

Ex II 2 G EEx ia IIC T1-T6 Ex II 1 D IP 67 T 101C

Art.-No. Connection diagram No. Operating voltage (UB) Output current active surface free Output current active surface covered Self-inductance (L) Self-capacitance (C) Permitted residual ripple max. Frequency of operating cycles max. Permitted ambient temperature LED-display

300 100 1 Ui = 15 V DC > typ. 2 mA < typ. 1.5 mA 2mH 250 nF 5% 1.5 kHz -25...+70C yellow

IA 0091 2

-20...+90C

Degree of protection IEC 529

All specifications are subject to change without notice. (08/2004)

IP 67 2m 2 x 0.14 mm2 brass PA PA PTFE PC 2m 3 x 0.14 mm2

Connection cable Housing material Active surface Li d

No. 1

No. 2

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 30 - NAMUR Housing M12 x1 II 2 G EEx ia IIC T1-T6 II 1 D IP 67 T 101C For use in areas where there is a risk of explosion Housing material: brass Non-flush mountable Sensing distance Sn = 4 mm
4, no

Certificate: DMT 03 ATEX E 048 DMT 01 ATEX E 157

Technical data Operating distance Sn [mm], flush mounting

Electrical version Output Type Application/Marking

2-wire DC NAMUR DIN 60947-5-6 IAS-30-A22-N

3-wire DC IAS-30-A22-N-StEx

Ex II 2 G EEx ia IIC T1-T6 Ex II 1 D IP 67 T 101C

300 200 1 Ui = 15 V DC > typ. 2 mA < typ. 1.5 mA 2mH 250 nF 5% 1.5 kHz -25...+70C yellow

IA 0090 2

-20...+90C

Degree of protection IEC 529 Connection cable Housing material Active surface Li d PA PA 2m 2 x 0.14 mm2

IP 67 2m 3 x 0.14 mm2 brass PTFE PC

All specifications are subject to change without notice. (08/2004)

No. 1

No. 2

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 30 - NAMUR Housing M18 x 1 II 2 G EEx ia IIC T1-T6 II 1 D IP 67 T 101C For use in areas where there is a risk of explosion Housing material: brass Flush mountable Sensing distance Sn = 5 mm
5, yes

Certificate: DMT 03 ATEX E 048 DMT 01 ATEX E 157

Technical data Operating distance Sn [mm], flush mounting

Electrical version Output Type Application/Marking

2-wire DC NAMUR DIN 60947-5-6 IAS-30-A13-N

3-wire DC IAS-30-A13-N-StEx

Ex II 2 G EEx ia IIC T1-T6 Ex II 1 D IP 67 T 101C

300 300 1 Ui = 15 V DC > typ. 2 mA < typ. 1.5 mA 2mH 250 nF 5% 1.5 kHz -25...+70C yellow

IA 0092 2

-20...+90C

Degree of protection IEC 529

All specifications are subject to change without notice. (08/2004)

IP 67 2m 2 x 0.34 mm2 brass PA PA PTFE PC 2m 3 x 0.34 mm2

Connection cable Housing material Active surface Li d

No. 1

No. 2

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 30 - NAMUR Housing M18 x 1 II 2 G EEx ia IIC T1-T6 II 1 D IP 67 T 101C For use in areas where there is a risk of explosion Housing material: brass Non-flush mountable Sensing distance Sn = 8 mm
8, no

Certificate:

DMT 03 ATEX E 048 DMT 01 ATEX E 157

Technical data Operating distance Sn [mm], flush mounting

Electrical version Output Type Application/Marking

2-wire DC NAMUR DIN 60947-5-6 IAS-30-A23-N

3-wire DC IAS-30-A23-N-StEx

Ex II 2 G EEx ia IIC T1-T6 Ex II 1 D IP 67 T 101C

300 400 1 Ui = 15 V DC > typ. 2 mA < typ. 1.5 mA 2mH 250 nF 5% 1.5 kHz -25...+70C yellow

IA 0094 2

-20...+90C

Degree of protection IEC 529 Connection cable Housing material Active surface Li d PA PA 2m 2 x 0.34 mm2

IP 67 2m 3 x 0.34 mm2 brass PTFE PC

All specifications are subject to change without notice. (08/2004)

No. 1

No. 2

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 30 - NAMUR Housing M30 x 1.5 II 2 G EEx ia IIC T1-T6 II 1 D IP 67 T 101C For use in areas where there is a risk of explosion Housing material: brass Flush mountable Sensing distance Sn = 10 mm
10, yes

Certificate:

DMT 03 ATEX E 048 DMT 01 ATEX E 157

Technical data Operating distance Sn [mm], flush mounting

Electrical version Output Type Application/Marking

2-wire DC NAMUR DIN 60947-5-6 IAS-30-A14-N

3-wire DC IAS-30-A14-N-StEx

Ex II 2 G EEx ia IIC T1-T6 Ex II 1 D IP 67 T 101C

300 500 1 Ui = 15 V DC > typ. 2 mA < typ. 1.5 mA 2mH 250 nF 5% 1 kHz -25...+70C yellow

IA 0095 2

-20...+90C

Degree of protection IEC 529

All specifications are subject to change without notice. (08/2004)

IP 67 2m 2 x 0.75 mm2 brass PVC PA PTFE PC 2m 3 x 0.75 mm2

Connection cable Housing material Active surface Li d

No. 1

No. 2

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 30 - NAMUR Housing M 30 x 1.5 II 2 G EEx ia IIC T1-T6 II 1 D IP 67 T 101C For use in areas where there is a risk of explosion Housing material: brass Non-flush mountable Sensing distance Sn = 15 mm
15, no

Certificate:

DMT 03 ATEX E 048 DMT 01 ATEX E 157

Technical data Operating distance Sn [mm], flush mounting

Electrical version Output Type Application/Marking

2-wire DC NAMUR DIN 60947-5-6 IAS-30-A24-N

3-wire DC IAS-30-A24-N-StEx

Ex II 2 G EEx ia IIC T1-T6 Ex II 1 D IP 67 T 101C

300 600 1 Ui = 15 V DC > typ.2 mA < typ. 1.5 mA 2mH 250 nF 5% 1 kHz -25...+70C yellow

IA 0096 2

-20...+90C

Degree of protection IEC 529 Connection cable Housing material Active surface Li d PVC PA 2m 2 x 0.75 mm2

IP 67 2m 3 x 0.75 mm2 brass PTFE PC

All specifications are subject to change without notice. (08/2004)

No. 1

No. 2

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Series 30 - NAMUR Housing M32 x 1.5 II 2 G EEx ia IIC T1-T6 II 1 D IP 67 T 101C For use in areas where there is a risk of explosion Housing material: brass Flush mountable Sensing distance Sn = 10 mm
10, yes

Certificate:

DMT 03 ATEX E 048 DMT 01 ATEX E 157

Technical data Operating distance Sn [mm], flush mounting

Electrical version Output Type Application/Marking

2-wire DC NAMUR DIN 60947-5-6 IAS-30-30-N-M32

3-wire DC IAS-30-30-N-M32-StEx

Ex II 2 G EEx ia IIC T1-T6 Ex II 1 D IP 67 T 101C

302 400 1 Ui = 15 V DC > typ. 2 mA < typ. 1.5 mA 2mH 250 nF 5% 1 kHz -25...+70C yellow

IA 0097 2

-20...+90C

Degree of protection IEC 529

All specifications are subject to change without notice. (08/2004)

IP 67 2m 2 x 0.75 mm2 brass PVC PVC PTFE PC 2m 3 x 0.75 mm2

Connection cable Housing material Active surface Li d

No. 1

No. 2

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive Sensors Serie 30 - NAMUR Housing M 32 x 1.5 II 2 G EEx ia IIC T1-T6 II 1 D IP 67 T 101C For use in areas where there is a risk of explosion Housing material: PA Non-flush mountable Sensing distance Sn = 15 mm
15, no

Certificate:

DMT 03 ATEX E 048 DMT 01 ATEX E 157

Technical data Operating distance Sn [mm], flush mounting

Electrical version Output Type Application/Marking IAS-30-35-N-M32

2-wire DC NAMUR DIN 60947-5-6 IAS-30-35-N-M32-StEx Ex II 2 G EEx ia IIC T1-T6 Ex II 1 D IP 67 T 101C

302 800 see below Ui = 15 V DC > typ. 2 mA < typ. 1.5 mA 2mH 250 nF 5% 1 kHz -25...+70C yellow

IA 0098

-20...+90C

Degree of protection IEC 529 Connection cable Housing material Active surface Li d PA

IP 67 2m 2 x 0.75 mm2 PA PA PC
All specifications are subject to change without notice. (08/2004)

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

INDUCTIVE HIGH-TEMPERATURE SENSORS

I T E M

Sensing distance Sn [mm]

Diameter [mm] or with thread or rectangular housing

Housing material

Electrical Version Amplifier 10...35 V DC

Connection Cable

P ag es

Aluminium [AL] Stainless steel [VA] Polyetheretherketone [PEEK]

NPN [20]; PNP[10]

metal flange connector sensor [Y] metal flange connector Amplifier [Y5]

flush 1 2 3 4 5 6 7 -

non-flush 4 8 12 15 20 25 35 M12 x 1 M18 x 1 M22 x 1.5 M30 x 1.5 M32 x 1.5 40 x 40 x 56 40 x 40 x 56 PEEK PEEK PEEK PEEK PEEK, PEEK/VA PEEK/AL PEEK/AL Amplifier ISA Sensor IS Sensor IS Sensor IS Sensor IS Sensor IS Sensor IS Sensor IS Cable Cable Y Y Y Y Y 76 77 78 79 80-81 82 83

98,5 x 64 x 34,5

All specifications are subject to change without notice. (05/2004)

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive High-Temperature Sensors Series - 250

Housing M12 x 1 with sealing screw For connection to the evaluation unit ISA-...-Y5 Housing material: PEEK For an ambient temperature of max. 250 C
Certificate:

Techincal data Operating distance Sn [mm] Sensing distance adjustable at the evaluation unit Mounting: flush/ non-flush Type Art.-No. 4 non-flush IS-250-M12 IA 0117

Permitted ambient temperature Enclosure rating IEC 529 C o n n e c t i o n c a b l e f o r c o n n e c t i o n t o i n d u c t i ve evaluation units ISA-... with plug-in connector Housing material Active surface

-70...+250C IP 68 2 m PTFE with VA screen grid lead PEEK PEEK

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

All specifications are subject to change without notice. (05/2004)

Inductive High-Temperature Sensors Series - 250

Housing M18 x 1 with sealing screw For connection to the evaluation unit ISA-...-Y5 Housing material: PEEK For an ambient temperature of max. 250 C
Certificate:

Techincal data Operating distance Sn [mm] Sensing distance adjustable at the evaluation unit Mounting: flush/ non-flush Type Art.-No. 8 non-flush IS-250-M18 IA 0118

-70...+250C IP 68 2 m PTFE with VA screen grid lead PEEK PEEK

Available also with 5 m connection cable: Art.-No. IA 0127

All specifications are subject to change without notice. (05/2004)

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive High-Temperature Sensors Series - 250

Housing M22 x 1.5 For connection to the evaluation unit ISA-...-Y5 Housing material: PEEK/Brass For an ambient temperature of max. 250 C
Certificate:

Techincal data Operating distance Sn [mm] Sensing distance adjustable at the evaluation unit Mounting: flush/ non-flush Type Art.-No. 12 non-flush IS-250-M22-Y IA 0119

Permitted ambient temperature Enclosure rating IEC 529 Connection for inductive evaluation units ISA-... Housing material Active surface

-70...+250C IP 67 metal flange connector PEEK/Brass PEEK

Connection cable is not delivered with the probe (see page 86). Order specifications: 2 m PTFE-cable with VA screen grid lead and connectors Art. No. 193312 5 m PTFE-cable with VA screen grid lead and connectors Art. No. 193313 10 m PTFE-cable with VA screen grid lead and connectors Art. No. 193314
All specifications are subject to change without notice. (05/2004)

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive High-Temperature Sensors Series - 250

Housing M30 x 1.5 For connection to the evaluation unit ISA-...-Y5 Housing material: PEEK/Brass For an ambient temperature of max. 250 C
Certificate:

Techincal data Operating distance Sn [mm] Sensing distance adjustable at the evaluation unit Mounting: flush/ non-flush Type Art.-No. 15 non-flush IS-250-M30-Y IA 0120

Permitted ambient temperature Enclosure rating IEC 529 Connection for inductive evaluation units ISA-... Housing material Active surface

-70...+250C IP 67 metal flange connector PEEK/Brass PEEK

Connection cable is not delivered with the probe (see page 86). Order specifications: 2 m PTFE-cable with VA screen grid lead and connectors Art. No. 193312 5 m PTFE-cable with VA screen grid lead and connectors Art. No. 193313 10 m PTFE-cable with VA screen grid lead and connectors Art. No. 193314 20 m PTFE-cable with VA screen grid lead and connectors Art. No. 193315
All specifications are subject to change without notice. (05/2004)

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive High-Temperature Sensors Series - 250

Housing M32 x 1.5 For connection to the evaluation unit ISA-...-Y5 Housing material: PEEK For an ambient temperature of max. 250 C
Certificate:

Techincal data Operating distance Sn [mm] Sensing distance adjustable at the evaluation unit Mounting: flush/ non-flush Type Art.-No. 20 non-flush IS-250-M32-Y IA 0122

Permitted ambient temperature Enclosure rating IEC 529 Connection for inductive evaluation units ISA-... Housing material Active surface

-70...+250C IP 67 metal flange connector PEEK PEEK

Connection cable is not delivered with the probe (see page 86). Order specifications: 2 m PTFE-cable with VA screen grid lead and connectors Art. No. 193312 5 m PTFE-cable with VA screen grid lead and connectors Art. No. 193313 10 m PTFE-cable with VA screen grid lead and connectors Art. No. 193314 20 m PTFE-cable with VA screen grid lead and connectors Art. No. 193315
All specifications are subject to change without notice. (05/2004)

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive High-Temperature Sensors Series - 250

Housing M32 x 1.5 For connection to the evaluation unit ISA-...-Y5 Housing material: PEEK/VA For an ambient temperature of max. 250 C
Certificate:

Techincal data Operating distance Sn [mm] Sensing distance adjustable at the evaluation unit Mounting: flush/ non-flush Type Art.-No. 20 non-flush IS-250-M32-PEEK/VA-Y IA 0124

Permitted ambient temperature Enclosure rating IEC 529 Connection for inductive evaluation units ISA-... Housing material Active surface

-70...+250C IP 67 metal flange connector PEEK/VA No. 1.4305 PEEK

Connection cable is not delivered with the probe (see page 86). Order specifications: 2 m PTFE-cable with VA screen grid lead and connectors Art. No. 193312 5 m PTFE-cable with VA screen grid lead and connectors Art. No. 193313 10 m PTFE-cable with VA screen grid lead and connectors Art. No. 193314 20 m PTFE-cable with VA screen grid lead and connectors Art. No. 193315
All specifications are subject to change without notice. (05/2004)

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive High-Temperature Sensors Series - 250

Housing 40 x 40 x 56 mm For connection to the evaluation unit ISA-...-Y5 Housing material: PEEK/AL For an ambient temperature of max. 250 C
Certificate:

Techincal data Operating distance Sn [mm] Sensing distance adjustable at the evaluation unit Mounting: flush/ non-flush Type Art.-No. 25 non-flush IS-250-C25-Y IA 0115

Permitted ambient temperature Enclosure rating IEC 529 Connection for inductive evaluation units ISA-... Housing material Active surface

-70...+250C IP 67 metal flange connector PEEK/AL PEEK

Connection cable is not delivered with the probe (see page 86). Order specifications: 2 m PTFE-cable with VA screen grid lead and connectors Art. No. 193312 5 m PTFE-cable with VA screen grid lead and connectors Art. No. 193313 10 m PTFE-cable with VA screen grid lead and connectors Art. No. 193314 20 m PTFE-cable with VA screen grid lead and connectors Art. No. 193315
All specifications are subject to change without notice. (05/2004)

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Inductive High-Temperature Sensors Series - 250

Housing 55 x 55 x 56 mm For connection to the evaluation unit ISA-...-Y5 Housing material: PEEK/AL For an ambient temperature of max. 250 C
Certificate:

Techincal data Operating distance Sn [mm] Sensing distance adjustable at the evaluation unit Mounting: flush/ non-flush Type Art.-No. 35 non-flush IS-250-C35-Y IA 0121

Permitted ambient temperature Enclosure rating IEC 529 Connection for inductive evaluation units ISA-... Housing material Active surface

-70...+250C IP 67 metal flange connector PEEK/AL PEEK

Connection cable is not delivered with the probe (see page 86). Order specifications: 2 m PTFE-cable with VA screen grid lead and connectors Art. No. 193312 5 m PTFE-cable with VA screen grid lead and connectors Art. No. 193313 10 m PTFE-cable with VA screen grid lead and connectors Art. No. 193314 20 m PTFE-cable with VA screen grid lead and connectors Art. No. 193315
All specifications are subject to change without notice. (05/2004)

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

Evaluation Unit For Inductive High-Temperature Sensors Series - 250 PNP Housing 98.5 x 64 x 34.5 mm For connection to inductive high-temperature sensors IS-250-... Housing material: AL
Certificate:

Technical data Operating distance Sn [mm], flush Mounting -

Electrical version Output Type P NP Art.-No. Connection diagram No. ISA-10-250-A-Y5-M12 IA 0133 6

4-pin DC antivalent ISA-10-250-A-Y5-M18 IA 0132 6 ISA-10-250-A-Y5-M22 IA 0131 6

ISA-10-250-A-Y5-M30/M32 IA 0130 6

ISA-10-250-A-Y5-C25 IA 0114 6 10...35 V DC 2 x 250 mA < 2.5 V 10 % typ. 15 mA 50 Hz -25...+70C built-in IP 67 metal flange connector M12 x 1 AL -

ISA-10-250-A-Y5-C35 IA 0129 6

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

All specifications are subject to change without notice. (09/2004)

FEMALE CONNECTORS

Sensor

F emale C o n n ecto r

Article-No. LED green/ yellow 191300

IP Connection

Cablelength

Sensor + length [mm] 26

Version

Type pnp npn pnp/npn

N o. 5 6 9

Fig.

[mm2] 65
3 x 0.5/Pg 7 clampable

[m]

Connector Y3, Y5

+
191350 191500

4 x 0.75/Pg 9 clampable

Y3, Y5

AC/DC

191550

4 x 0.75/Pg 9 clampable

pnp/npn

191900

3 x 0.34

2,5

Y3, Y5

pnp/npn pnp npn pnp/npn

18 21 22 36

192000 192150

3 x 0.34

Y3, Y5

+
192200 192900

3 x 0.34

Y3, Y5

4 x 0.25

Y3, Y5 antivalent Y3, Y5 antivalent

All specifications are subject to change without notice. (05/2004)

pnp/npn

193000

4 x 0.25

pnp/npn pnp pnp/npn

45 46 47

193210 193220 193230 193345

3 x 0.25

Y7, Y8

3 x 0.25

Y7, Y8

68
5 x 0.25

pnp/npn 49a

Y10

pnp/npn AC/DC

193350

5 x 0.25

Y1, Y9

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

MOUNTING BLOCKS

Dimension:

Art.-No. Block No.

190150 190200 190250 190300 190350 190400 190450 190030 190050 190100 131 132 133 134 135 136 137 138 139 140

Sensor [mm] 10 11 20 22 30 32 34 40 50 64

a 30 30 45 45 60 60 60 80 80 95

b 20 20 30 30 45 45 45 65 65 80

c 10 10 15 15 15 15 15 15 15 15

d 20 20 30 30 45 45 45 65 65 80

e 4,3 4,3 5,3 5,3 5,3 5,3 5,3 5,3 5,3 5,3

f 8 8 9 9 9 9 9 9 9 9

g 4,5 4,5 6 6 6 6 6 6 6 6

h 10 11 20 22 30 32 34 40 50 64

Nuts M4 M4 M5 M5 M5 M5 M5 M5
All specifications are subject to change without notice. (05/2004)

M5 M5

Dimensions "a" to "h" in mm

FEMALE CONNECTOR, SCREENED

Connection cable
For inductive high-temperature sensors with Lemoconnector and screened cable 2 m Art.-No. 193312 5 m Art.-No. 193313 10 m Art.-No. 193314 20 m Art.-No. 193315

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

PROTECTION CAPS AND PROTECTION SETS

Example: Protection Caps M30/M32 PTFE

PROTECTION CAP
The PTFE protection cap (PEEK and Delrin are also available) is designed for applications where the detected material is highly abrasive, e.g. granules. It is a protection cap for the front cap of the sensor. In the case of damage due to abrasion one only has to change the protection cap and the sensor remains in good condition.

Dimension: Protection Cap M30 PTFE Art.-No. 75000450 PEEK Art.-No. 75000460 Delrin Art.-No. 75000470

Dimension: Protection Cap M32 PTFE Art.-No. 75000400 PEEK Art.-No. 75000410 Delrin Art.-No. 75000420

All specifications are subject to change without notice. (05/2004)

Example: Protection Set M32

PROTECTION SET
The PTFE protection set M32 x 1.5 consists of an internally threaded cover, a Pg9-screwing for cable entry and a rubber gasket between the cover and the sensor. This protection cover serves as improvement to the degree of protection, against infiltration of liquids, for example in applications where the sensor is totally immersed in liquids. The resistance of the material still needs to be checked. The thread of the sensor has to be sealed, for example with PTFE sealing- tape. The protection cover has to be screwed totally up to the end, and then the Pg-screw has to be fixed.

Protection Set M18 Art.-No. 196305 Protection Set M30 Art.-No. 196302 Protection Set M32 Art.-No. 196301

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

NORMS
The products of Rechner Industrie-Elektronik GmbH are designed and checked in accordance with the standards and specifications, DIN - VDE - IEC, for electric and electronic instruments. For new and revised products the newest standards are always used.

Effective standards for proximity switches and sensors: DIN VDE 0660 Part 208: Low-voltage switchgear - additional requirements for inductive proximity switches. DIN VDE 0660 Part 209 Low-voltage switchgear and controlgear, control switches - additional requirements for proximity switches used in safety-related applications. DIN VDE 0660 Part 212 (Replaces DIN 19234) Istrumentation and control technology - electrical position sensors - DC interface for position sensors and switching amplifiers European Standards EN 60947-5-2 Low Voltage Switchgear Part 5 Control circuit devices and switching elements, section 2: proximity switches EN 60947-5-6 Control circuit devices and switching elements, proximity sensors - DC interface for proximity sensors and switching amplifiers (NAMUR) International Standards IEC 947-5-2 Low-voltage switchgear and controlgear Part 5 Control circuit devices and switching elements - Section 2, proximity switches Draft IEC 61934 Control circuit devices and switching elements DC interface for proximity sensors and switching amplifiers (NAMUR) Standards On Explosion Protection DIN EN 50014 Electrical apparatus for potentially explosive environments. General requirements. DIN EN 50020 Electrical apparatus for potentially explosive environments. Intrinsic safety i EN 60079-10 Electrical apparatus for potentially explosive environments. Classification of hazardous areas. EN 60079-14 Electrical apparatus for potentially explosive environments. Classification of hazardous areas (mines excepted).
All specifications are subject to change without notice. (05/2004)

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

NORMS
Norms for quality assurance (QS) DIN ISO 9000-9004 (EN 29000-29 004) Quality assurance (QA) for products and services DIN ISO 9001 Quality assurance in design/development, production, installation and servicing DIN ISO 9002 Quality assurance in production DIN ISO 9003 Quality assurance for final testing only DIN ISO 9004 Quality management and elements of a quality management system RECHNER Industrie-Elektronik-GmbH is certified according to DIN ISO 9001:2000.

- Marking The CE marking represents the manufacturers confirmation that the identified product conforms to applicable standards and directives throughout Europe. The following regulations apply to the RECHNER products. 89/336/EWG EMC Directive (EN 60 947-5-2) 73/23/EWG Low-voltage Directive (compare with VDE 0160, product standard EN 60947-5-2) Directive 94/9/EG Equipment and Protection Systems designed for use in potentially explosive environments
All specifications are subject to change without notice. (07/2004)

RECHNER Industrie-Elektronik GmbH certifies the conformity of its products with each of the applicable directives in a Manufacturers Declaration. In addition RECHNER has a laboratory accredited by DATech for testings according to IEC/EN 60947-5-2 and also an accredited EMC laboratory.

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

SPECIFICATION FOR EXPLOSION PROTECTION

European Union Division of Hazards Explosive mixtures in Group1: mines susceptible to fire damp Group2: areas other than mines Classification of the protection types intrinsic safety/ flame-proof enclosure according to minimum ignition current/limit gap with reference to the minimum ignition energy of representative gases: Group I Methane Group IIA Propane Group IIB Ethylene Group IIC Hydrogen, Acetylene This classification also partially applies to the type of protection n (zone 2 equipment)

North America Explosive mixtures of air with CLASS I: Gases and vapours CLASS II: Dust CLASS III: Fibers Division of CLASS according to ignition energy: CLASS I Group A Acetylene B Hydrogen C Ethylene D Methane CLASS II Group E Metal dust F Coal dust G Grain dust CLASS III No grouping

Ignition Hazards due to Sparks

Ignition Hazards due to Hot Surfaces

Classification into temperature according to IEC 79-8 for maximum surface temperatures at an ambient temperature of 40C under failure conditions: T1 < 450C T2 < 300C T3 < 200C T4 < 135 C T5 < 100C T6 < 85C

The following are classified according to the probability of the occurrence of an explosive atmosphere:

Division of Hazardous Areas

For gases, fumes and vapours: (EN 60079-10) Zone 0 constant or long term 1 occasional 2 rare and short term for dusts: (EN 1127-1) Zone 20 constant or long term or frequent 21 occasional 22 short term or accumulation or layers of dust

for gases and dusts

}
}

Division 1 Division 2

Note (see IEC 79-10): constant or long term > 1000 h/year, occasionally represents 101000 h/year, rare or short term < 10h/year For the ratings of combustible gases and vapours as a basis for classification according to ignition energy, ignition temperature and flash point, see: Redeker, Nabert, Schn/Safety Ratings of Combustible Gases and Vapours PTB Certification Authorities BVS BASEEFA Physikalisch-Technische Bundesanstalt Bergbauversuchsstrecke British Approvals Service for Electrical Equipment in Flammable Atmosphere and others NFPA 497 M CSA Nr. C22-1 UL FM CSA Underwriters Laboratories, USA Factory Mutual Research, USA Canadian Standards Association
All specifications are subject to change without notice. (05/2004)

Safety data

DIN EN 60079-14 (VDE 0165 Part 1) Installation Requirements for explosive gas environments DIN EN 50281-1-2 (VDE 0165 Part 2) for environments with flammable dust

NFPA 70

National Electrical Code Art. 500 Standard for Intrinsically safe operations ...

NFPA 493

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

TYPE SELECTION IN ARTICLE NUMBER ORDER

Art.-No. Type Description
100110 100200 100300 100310 100500 101010 101200 101250 101700 101900 102300 102350 102400 102500 103001 103050 103060 103068 103100 103200 105750 105751 105780 105785 105800 106600 108350 108380 108385 108400 109200 109300 110950 110980 110985 111000 111800 113550 113610 113650 114010 114110 114400 114450 114500 114510 114610 114650 114900 115000 115300 115350 116900 117000 119480 IAS-10-M8-S IAS-10-M8-S-Y7 IAS-10-M8- IAS-10-M8--Y7 IAS-10-A11-S IAS-10-A11- IAS-10-A21-S IAS-10-A21- IAS-10-A12-S IAS-10-A12- IAS-10-A12-S-Y5 IAS-10-A12--Y5 IAS-10-A22-S IAS-10-A22- IAS-10-A22-S-Y5 IAS-10-A22--Y5 IAS-10-A13-A IAS-10-A13-A-Y5 IAS-10-A13-S IAS-10-A13- IAS-10-A13-IL IAS-10-A13-IL-Y3 IAS-10-A23-A IAS-10-A23-A-Y3 IAS-10-A23-S IAS-10-A23-S-Y3 IAS-10-A23-IL IAS-10-A14-A IAS-10-A14-A-Y3 IAS-10-A14-S IAS-10-A14-S-Y3 IAS-10-A14--Y3 IAS-10-A14-IL IAS-10-A24-A IAS-10-A24-A-Y3 IAS-10-A24-S IAS-10-A24-S-Y3 IAS-10-A24-IL IAS-10-04-S IAS-10-04- IAS-10-M5-S IAS-10-M5- IAS-10-M5-S-Y7 IAS-10-M5--Y7 IAS-10-6.5/15-S IAS-10-6.5-S-LED IAS-10-6.5--LED IAS-10-6.5/15- IAS-10-6.5-S-Y7 IAS-10-6.5--Y7 IAS-10-14-S IAS-10-14- IAS-10-23-S-M22 IAS-10-23--M22 IAS-10-40-A

Page
23 24 23 24 22 22 25 25 27 27 28 28 30 30 31 31 34 36 34 34 35 37 39 41 39 41 40 45 46 45 46 46 47 49 50 49 50 51 16 16 17 17 18 18 19 20 20 19 21 21 26 26 43 43 53

Art.-No.
119880 120153 190030 190050 190100 190150 190200 190250 190300 190350 190400 190450 191300 191350 191500 191550 191900 192000 192150 192200 192900 193000 193210 193220 193230 193312 193313 193314 193315 193345 193350 196301 196302 196305 200500 201200 201700 201900 202300 202400 202500 203050 203060 203067 203100 205780 205785 205800 208380 208385 208400 210980 210985 211000 213610

Type Description
IAS-10-51-A IAS-10-62-A Mounting block No. 138 40D, PA Mounting block No. 139 50D, PA Mounting block No. 140 64D, PA Mounting block No. 131 10D, PA Mounting block No. 132 11D, PA Mounting block No. 133 20D, PA Mounting block No. 134 22D, PA Mounting block No. 135 30D, PA Mounting block No. 136 32D, PA Mounting block No. 137 34D, PA Female connector No. 5, angled Female connector No. 6, angled Female connector No. 9, angled Female connector No. 9A, angled Female connector No. 16, angled Female connector No. 18, straight Female connector No. 21, angled Female connector No. 22, angled Female connector No. 36, straight Female connector No. 38, angled Female connector No. 45, straight Female connector No. 46, angled Female connector No. 47, angled Female connector IS-HT, 2 m, screened Female connector IS-HT, 5 m, screened Female connector IS-HT, 10 m, screened Female connector IS-HT, 20 m, screened Female connector No. 49a, angled Female connector No. 50, angled Protection set M32/PTFE Protection set M30/PTFE Protection set M18/PTFE IAS-20-A11-S IAS-20-A21-S IAS-20-A12-S IAS-20-A12- IAS-20-A12-S-Y5 IAS-20-A22-S IAS-20-A22- IAS-20-A22--Y5 IAS-20-A13-A IAS-20-A13-A-Y5 IAS-20-A13-S IAS-20-A23-A IAS-20-A23-A-Y3 IAS-20-A23-S IAS-20-A14-A IAS-20-A14-A-Y3 IAS-20-A14-S IAS-20-A24-A IAS-20-A24-A-Y3 IAS-20-A24-S IAS-20-04-S

Page
55 56 86 86 86 86 86 86 86 86 86 86 85 85 85 85 85 85 85 85 85 85 85 85 85 86 86 86 86 85 85 87 87 87 22 25 27 27 28 30 30 31 34 36 34 39 41 39 45 46 45 49 50 49 16

All specifications are subject to change without notice. (05/2004)

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

TYPE SELECTION IN ARTICLE NUMBER ORDER

Art.-No.
213650 214010 214110 214500 217300 219880 300100 300200 300300 300400 300500 300600 300700 300800 300900 301000 301500 302400 302800 600300 600500 600700 600900 601000 601200 604100 604300 607300 607500 610500 610700 614900 620900 621100 75000400 75000410 75000420 75000450 75000460 75000470 IA0090 IA0091 IA0092 IA0094 IA0095 IA0096 IA0097 IA0098 IA0109 IA0110 IA0111 IA0114 IA0115 IA0117 IA0118

Type Description
IAS-20-04- IAS-20-M5-S IAS-20-M5- IAS-20-6.5/15-S IAS-20-30-S IAS-20-51-A IAS-30-A12-N, ATEX IAS-30-A22-N, ATEX IAS-30-A13-N, ATEX IAS-30-A23-N, ATEX IAS-30-A14-N, ATEX IAS-30-A24-N, ATEX IAS-30-04-N IAS-30-M5-N IAS-30-6.5-N IAS-30-M8-N IAS-30-14-N, ATEX IAS-30-30-N-M32, ATEX IAS-30-35-N-M32, ATEX IAS-60-A12-S IAS-60-A12- IAS-60-A22-S IAS-60-A22- IAS-60-A13-S IAS-60-A13- IAS-60-A23-S IAS-60-A23- IAS-60-A14-S IAS-60-A14- IAS-60-A24-S IAS-60-A24- IAS-60-14-S-M12 IAS-60-40-S IAS-60-40- Protection cap M32 PTFE Protection cap M32 PEEK Protection cap M32 Delrin Protection cap M30 PTFE Protection cap M30 PEEK Protection cap M30 Delrin IAS-30-A22-N-StEx, ATEX IAS-30-A12-N-StEx, ATEX IAS-30-A13-N-StEx, ATEX IAS-30-A23-N-StEx, ATEX IAS-30-A14-N-StEx, ATEX IAS-30-A24-N-StEx, ATEX IAS-30-30-N-M32-StEx, ATEX IAS-30-35-N-M32-StEx, ATEX IAS-10-A14-A-StEx IAS-10-A13-A-StEx IAS-10-A12-S-StEx ISA-10-250-A-Y5-C25 IS-250-C25-Y IS-250-M12 IS-250-M18

Page
16 17 17 19 44 55 67 68 69 70 71 72 62 63 64 65 66 73 74 29 29 32 32 38 38 42 42 48 48 52 52 33 54 54 87 87 87 87 87 87 68 67 69 70 71 72 73 74 60 59 58 84 82 76 77

Art.-No. Type Description

IA0119 IA0120 IA0121 IA0122 IA0124 IA0127 IA0129 IA0130 IA0131 IA0132 IA0133 IA0136 IA0137 IA0138 IS-250-M22-Y IS-250-M30-Y IS-250-C35-Y IS-250-M32-Y IS-250-M32-PEEK/VA-Y IS-250-M18, 5 m ISA-10-250-A-Y5-C35 ISA-10-250-A-Y5-M30/M32 ISA-10-250-A-Y5-M22 ISA-10-250-A-Y5-M18 ISA-10-250-A-Y5-M12 IAS-20-A13-A-StEx IAS-20-A14-A-StEx IAS-20-A12-S-StEx

Page
78 79 83 80 81 77 84 84 84 84 84 59 60 58

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

All specifications are subject to change without notice. (05/2004)

TYPE SELECTION IN TYPE DESCRIPTION ORDER

Type Description
Female connector IS-HT, 2 m, screened Female connector IS-HT, 5 m, screened Female connector IS-HT, 10 m, screened Female connector IS-HT, 20 m, screened Female connector No. 5, angled Female connector No. 6, angled Female connector No. 9, angled Female connector No. 9A, angled Female connector No. 16, angled Female connector No. 18, straight Female connector No. 21, angled Female connector No. 22, angled Female connector No. 36, straight Female connector No. 38, angled Female connector No. 45, straight Female connector No. 46, angled Female connector No. 47, angled Female connector No. 49a, angled Female connector No. 50, angled IAS-10-04- IAS-10-04-S IAS-10-14- IAS-10-14-S IAS-10-23--M22 IAS-10-23-S-M22 IAS-10-40-A IAS-10-51-A IAS-10-6.5/15- IAS-10-6.5/15-S IAS-10-6.5--LED IAS-10-6.5--Y7 IAS-10-6.5-S-LED IAS-10-6.5-S-Y7 IAS-10-62-A IAS-10-A11- IAS-10-A11-S IAS-10-A12- IAS-10-A12--Y5 IAS-10-A12-S IAS-10-A12-S-StEx IAS-10-A12-S-Y5 IAS-10-A13-A IAS-10-A13-A-StEx IAS-10-A13-A-Y5 IAS-10-A13-IL IAS-10-A13-IL-Y3 IAS-10-A13- IAS-10-A13-S IAS-10-A14-A IAS-10-A14-A-StEx IAS-10-A14-A-Y3 IAS-10-A14-IL IAS-10-A14--Y3 IAS-10-A14-S IAS-10-A14-S-Y3

Art.-No. Page
193312 193313 193314 193315 191300 191350 191500 191550 191900 192000 192150 192200 192900 193000 193210 193220 193230 193345 193350 113650 113610 115350 115300 117000 116900 119480 119880 114650 114500 114610 115000 114510 114900 120153 101010 100500 101900 102350 101700 IA0111 102300 103060 IA0110 103068 105750 105751 103200 103100 108380 IA0109 108385 110950 109300 108400 109200 86 86 86 86 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 16 16 26 26 43 43 53 55 19 19 20 21 20 21 56 22 22 27 28 27 58 28 34 59 36 35 37 34 34 45 60 46 47 46 45 46

Type Description
IAS-10-A21- IAS-10-A21-S IAS-10-A22- IAS-10-A22--Y5 IAS-10-A22-S IAS-10-A22-S-Y5 IAS-10-A23-A IAS-10-A23-A-Y3 IAS-10-A23-IL IAS-10-A23-S IAS-10-A23-S-Y3 IAS-10-A24-A IAS-10-A24-A-Y3 IAS-10-A24-IL IAS-10-A24-S IAS-10-A24-S-Y3 IAS-10-M5- IAS-10-M5--Y7 IAS-10-M5-S IAS-10-M5-S-Y7 IAS-10-M8- IAS-10-M8--Y7 IAS-10-M8-S IAS-10-M8-S-Y7 IAS-20-04- IAS-20-04-S IAS-20-30-S IAS-20-51-A IAS-20-6.5/15-S IAS-20-A11-S IAS-20-A12- IAS-20-A12-S IAS-20-A12-S-StEx IAS-20-A12-S-Y5 IAS-20-A13-A IAS-20-A13-A-StEx IAS-20-A13-A-Y5 IAS-20-A13-S IAS-20-A14-A IAS-20-A14-A-StEx IAS-20-A14-A-Y3 IAS-20-A14-S IAS-20-A21-S IAS-20-A22- IAS-20-A22--Y5 IAS-20-A22-S IAS-20-A23-A IAS-20-A23-A-Y3 IAS-20-A23-S IAS-20-A24-A IAS-20-A24-A-Y3 IAS-20-A24-S IAS-20-M5- IAS-20-M5-S IAS-30-04-N

Art.-No. Page
101250 101200 102500 103050 102400 103001 105780 105785 108350 105800 106600 110980 110985 113550 111000 111800 114110 114450 114010 114400 100300 100310 100110 100200 213650 213610 217300 219880 214500 200500 201900 201700 IA0138 202300 203060 IA0136 203067 203100 208380 IA0137 208385 208400 201200 202500 203050 202400 205780 205785 205800 210980 210985 211000 214110 214010 300700 25 25 30 31 30 31 39 41 40 39 41 49 50 51 49 50 17 18 17 18 23 24 23 24 16 16 44 55 19 22 27 27 58 28 34 59 36 34 45 60 46 45 25 30 31 30 39 41 39 49 50 49 17 17 62

All specifications are subject to change without notice. (05/2004)

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

TYPE SELECTION IN TYPE DESCRIPTION ORDER

Type Description
IAS-30-14-N, ATEX IAS-30-30-N-M32, ATEX IAS-30-30-N-M32-StEx, ATEX IAS-30-35-N-M32, ATEX IAS-30-35-N-M32-StEx, ATEX IAS-30-6.5-N IAS-30-A12-N, ATEX IAS-30-A12-N-StEx, ATEX IAS-30-A13-N, ATEX IAS-30-A13-N-StEx, ATEX IAS-30-A14-N, ATEX IAS-30-A14-N-StEx, ATEX IAS-30-A22-N, ATEX IAS-30-A22-N-StEx, ATEX IAS-30-A23-N, ATEX IAS-30-A23-N-StEx, ATEX IAS-30-A24-N, ATEX IAS-30-A24-N-StEx, ATEX IAS-30-M5-N IAS-30-M8-N IAS-60-14-S-M12 IAS-60-40- IAS-60-40-S IAS-60-A12- IAS-60-A12-S IAS-60-A13- IAS-60-A13-S IAS-60-A14- IAS-60-A14-S IAS-60-A22- IAS-60-A22-S IAS-60-A23- IAS-60-A23-S IAS-60-A24- IAS-60-A24-S IS-250-C25-Y IS-250-C35-Y IS-250-M12 IS-250-M18 IS-250-M18, 5 m IS-250-M22-Y IS-250-M30-Y IS-250-M32-PEEK/VA-Y IS-250-M32-Y ISA-10-250-A-Y5-C25 ISA-10-250-A-Y5-C35 ISA-10-250-A-Y5-M12 ISA-10-250-A-Y5-M18 ISA-10-250-A-Y5-M22 ISA-10-250-A-Y5-M30/M32 Mounting block No. 131 10D, PA Mounting block No. 132 11D, PA Mounting block No. 133 20D, PA Mounting block No. 134 22D, PA Mounting block No. 135 30D, PA

Art.-No. Page Type Description

301500 302400 IA0097 302800 IA0098 300900 300100 IA0091 300300 IA0092 300500 IA0095 300200 IA0090 300400 IA0094 300600 IA0096 300800 301000 614900 621100 620900 600500 600300 601200 601000 607500 607300 600900 600700 604300 604100 610700 610500 IA0115 IA0121 IA0117 IA0118 IA0127 IA0119 IA0120 IA0124 IA0122 IA0114 IA0129 IA0133 IA0132 IA0131 IA0130 190150 190200 190250 190300 190350 66 73 73 74 74 64 67 67 69 69 71 71 68 68 70 70 72 72 63 65 33 54 54 29 29 38 38 48 48 32 32 42 42 52 52 82 83 76 77 77 78 79 81 80 84 84 84 84 84 84 86 86 86 86 86 Mounting block No. 136 32D, PA Mounting block No. 137 34D, PA Mounting block No. 138 40D, PA Mounting block No. 139 50D, PA Mounting block No. 140 64D, PA Protection cap M30 Delrin Protection cap M30 PEEK Protection cap M30 PTFE Protection cap M32 Delrin Protection cap M32 PEEK Protection cap M32 PTFE Protection set M18/PTFE Protection set M30/PTFE Protection set M32/PTFE

Art.-No. Page
190400 190450 190030 190050 190100 75000470 75000460 75000450 75000420 75000410 75000400 196305 196302 196301 86 86 86 86 86 87 87 87 87 87 87 87 87 87

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

All specifications are subject to change without notice. (05/2004)

RECHNER Industrie-Elektronik GmbH Gaustrae 8-10 D-68623 Lampertheim Tel. +49 (0) 62 06 50 07-0 Fax +49 (0) 62 06 50 07-20 email [email protected] www.rechner-sensors.de

SENSORS FOR INDUSTRIAL AUTOMATION INDUCTIVE CAPACITIVE OPTOELECTRONIC MAGNETO-RESISTIVE CALORIMETRIC

Ask for further catalogues CAPACITIVE SENSORS KAS CAPACITIVE SENSORS KXS MAGNETORESISTIVE SENSORS OPTOELECTRONIC SENSORS ISOLATING SWITCHING AMPLIFIERS AND POWER SUPPLIES CAPACITIVE LEVEL MEASURING SYSTEMS FLOW SENSORS

Your Representative:

Gaustrae 8-10
Tel. +49 (0) 62 06 50 07-0 www.rechner-sensors.de

INDUSTRIE-ELEKTRONIK GmbH 68623 Lampertheim Germany

Fax Intl. +49 (0) 62 06 50 07-20 e-mail: [email protected]

CAPE Physics Unit 2 2016 Mark Scheme
75% (8)
CAPE Physics Unit 2 2016 Mark Scheme
16 pages
Verilog Code For Mac Unit
100% (6)
Verilog Code For Mac Unit
4 pages
OmniBAS Troubleshooting 01 en
100% (2)
OmniBAS Troubleshooting 01 en
218 pages
AI 210 Instrumentation
No ratings yet
AI 210 Instrumentation
61 pages
PNP NPN Sensors
No ratings yet
PNP NPN Sensors
9 pages
BR Safety 2014 en PDF
No ratings yet
BR Safety 2014 en PDF
40 pages
Temperature-Measurements-01 IIT Roorkee
No ratings yet
Temperature-Measurements-01 IIT Roorkee
47 pages
AI 210 Instrumentation
No ratings yet
AI 210 Instrumentation
59 pages
Analog
No ratings yet
Analog
16 pages
How Is The Assignment of The MPI DP Interface Defined
100% (1)
How Is The Assignment of The MPI DP Interface Defined
10 pages
Instruction Manual: Pid Based Pressure Loop Trainer
No ratings yet
Instruction Manual: Pid Based Pressure Loop Trainer
28 pages
Chapter 7 - Feedback Controllers
50% (2)
Chapter 7 - Feedback Controllers
44 pages
Api I C3 1 LD
100% (1)
Api I C3 1 LD
97 pages
Basics of Thermowell Design and Selection - IsA
No ratings yet
Basics of Thermowell Design and Selection - IsA
3 pages
Instrumentation and Process Control - Instrumentation
100% (1)
Instrumentation and Process Control - Instrumentation
10 pages
MID Flow Sensor Brochure UK
No ratings yet
MID Flow Sensor Brochure UK
6 pages
PLC Input Output
No ratings yet
PLC Input Output
16 pages
Industrial Safety Supply, Inc.: Francisco A. Lopez
100% (1)
Industrial Safety Supply, Inc.: Francisco A. Lopez
29 pages
Industrial Training
No ratings yet
Industrial Training
49 pages
Step 7 Elementary Data Types
No ratings yet
Step 7 Elementary Data Types
3 pages
Feedforward On Temperature Control Systems.
100% (2)
Feedforward On Temperature Control Systems.
3 pages
Training - Level
No ratings yet
Training - Level
37 pages
Sensors
No ratings yet
Sensors
64 pages
8 A-D Converter
No ratings yet
8 A-D Converter
30 pages
IC Fabrication - An Introduction
No ratings yet
IC Fabrication - An Introduction
37 pages
PLC For Beginners
100% (3)
PLC For Beginners
41 pages
Proximity Sensors
No ratings yet
Proximity Sensors
59 pages
Lecture 1
100% (1)
Lecture 1
39 pages
Low Cost Temperature Sensor Device
No ratings yet
Low Cost Temperature Sensor Device
17 pages
PLCs and Pneumatic Systems
0% (2)
PLCs and Pneumatic Systems
5 pages
CH - 1 Digital Systems
No ratings yet
CH - 1 Digital Systems
44 pages
1Ch1-Introduction To Microprocessor and Computer, Brey Barry
No ratings yet
1Ch1-Introduction To Microprocessor and Computer, Brey Barry
110 pages
Temperature Control System Group 4.
No ratings yet
Temperature Control System Group 4.
3 pages
RS485 Data Transmission Module 433MHz RF Data Transceiver 2km PLC Wireless Controller
No ratings yet
RS485 Data Transmission Module 433MHz RF Data Transceiver 2km PLC Wireless Controller
4 pages
ACOUSTIC CAMERA Introduction
No ratings yet
ACOUSTIC CAMERA Introduction
9 pages
Ip TV User Guide All STB
No ratings yet
Ip TV User Guide All STB
22 pages
ProximitySensorsCompared InductiveCapacitivePhotoelectricUltrasonic
No ratings yet
ProximitySensorsCompared InductiveCapacitivePhotoelectricUltrasonic
60 pages
EL5000 Hardware Introduction
No ratings yet
EL5000 Hardware Introduction
39 pages
Instrumentation
No ratings yet
Instrumentation
16 pages
Instrumentation Basics - 01 - Pressure Measurement
100% (1)
Instrumentation Basics - 01 - Pressure Measurement
47 pages
Programmable Logic Controller: Shankar Jothyraj
No ratings yet
Programmable Logic Controller: Shankar Jothyraj
39 pages
Cci PDF
No ratings yet
Cci PDF
4 pages
Application of DCS in Cement Manufacturing Process
100% (6)
Application of DCS in Cement Manufacturing Process
48 pages
sw400dc Swing Gate Manual
No ratings yet
sw400dc Swing Gate Manual
26 pages
Pressure Measurement
No ratings yet
Pressure Measurement
59 pages
Samson 3730
100% (1)
Samson 3730
88 pages
Flow Computer: XFC 6200/6201EX
No ratings yet
Flow Computer: XFC 6200/6201EX
8 pages
Instrumentation and Controls
No ratings yet
Instrumentation and Controls
30 pages
S71500 PLC Selection List
No ratings yet
S71500 PLC Selection List
28 pages
Meter of Network Parameters Nd20 Type: User'S Manual
No ratings yet
Meter of Network Parameters Nd20 Type: User'S Manual
35 pages
Asia-Pacific Industrial Automation And Control Systems Market
No ratings yet
Asia-Pacific Industrial Automation And Control Systems Market
47 pages
Using Accelerometers in A Data Acquisition System
No ratings yet
Using Accelerometers in A Data Acquisition System
10 pages
Risk Assessment
No ratings yet
Risk Assessment
38 pages
Control 101 The Process Control Loop Controllers, Types of Control
No ratings yet
Control 101 The Process Control Loop Controllers, Types of Control
59 pages
Pressure Measurement
No ratings yet
Pressure Measurement
37 pages
What Is Industrial Automation
100% (1)
What Is Industrial Automation
9 pages
Motion control A Complete Guide
From Everand
Motion control A Complete Guide
Gerardus Blokdyk
No ratings yet
Capacitive Sensors
No ratings yet
Capacitive Sensors
192 pages
Basic Instrumentation
No ratings yet
Basic Instrumentation
55 pages
Endress Hauser
No ratings yet
Endress Hauser
24 pages
Weidmuller Analog Signal Conditioners
No ratings yet
Weidmuller Analog Signal Conditioners
65 pages
Iot For Engineers Ece3501 Digital Assignment-1: L.Anirudh 18bec0559
No ratings yet
Iot For Engineers Ece3501 Digital Assignment-1: L.Anirudh 18bec0559
28 pages
2nd Review Document
No ratings yet
2nd Review Document
6 pages
Bearing Inspection
No ratings yet
Bearing Inspection
20 pages
Rothe Erde GMBH Slewing Bearing
No ratings yet
Rothe Erde GMBH Slewing Bearing
6 pages
Grease Sampling Set
No ratings yet
Grease Sampling Set
4 pages
NetherLocks Process Safety
No ratings yet
NetherLocks Process Safety
9 pages
Chart Recorders
100% (1)
Chart Recorders
4 pages
ABB Electric Motor Water Cooled
100% (1)
ABB Electric Motor Water Cooled
147 pages
Regasification Hamworthy
100% (1)
Regasification Hamworthy
19 pages
Read First: Symmetra LX Startup Guide Extended Run Cabinets
No ratings yet
Read First: Symmetra LX Startup Guide Extended Run Cabinets
2 pages
AT89C51 Microcontroller
No ratings yet
AT89C51 Microcontroller
8 pages
Certificaciones Centro de Control 30 PTS CC El Eden
No ratings yet
Certificaciones Centro de Control 30 PTS CC El Eden
32 pages
Digital Electronics MCQ
No ratings yet
Digital Electronics MCQ
23 pages
Data Sheet For Earthing and Lightning Protection Systems
No ratings yet
Data Sheet For Earthing and Lightning Protection Systems
3 pages
18.03 Pset 5 PDF
No ratings yet
18.03 Pset 5 PDF
23 pages
Resistive Potentiometer
100% (1)
Resistive Potentiometer
7 pages
INTERVIEW
No ratings yet
INTERVIEW
4 pages
Abdullah Et Al - 2006
No ratings yet
Abdullah Et Al - 2006
7 pages
558 Series: Snap-In LED .156" (3.96 MM) Mounting Hole
No ratings yet
558 Series: Snap-In LED .156" (3.96 MM) Mounting Hole
2 pages
TP Modulation FM
No ratings yet
TP Modulation FM
9 pages
XGY1000 Head Tracker
No ratings yet
XGY1000 Head Tracker
14 pages
Pterra Report
No ratings yet
Pterra Report
63 pages
Deluxe Test Probe Kit Assembly Instruction by KK4HXJ - Revised
No ratings yet
Deluxe Test Probe Kit Assembly Instruction by KK4HXJ - Revised
6 pages
MIMO
100% (1)
MIMO
23 pages
NHPC Dulhasti 1
No ratings yet
NHPC Dulhasti 1
2 pages
Mr-Je - C Servo Amplifier Instruction Manual (Cc-Link Ie Field Network Basic)
No ratings yet
Mr-Je - C Servo Amplifier Instruction Manual (Cc-Link Ie Field Network Basic)
94 pages
UCS5603-IC-Datasheet- NDF1617 PIXEL
No ratings yet
UCS5603-IC-Datasheet- NDF1617 PIXEL
14 pages
PHILIPS 170s7fs00
No ratings yet
PHILIPS 170s7fs00
71 pages
Ariston Ab108xit 2
No ratings yet
Ariston Ab108xit 2
87 pages
Tda1013b PDF
No ratings yet
Tda1013b PDF
11 pages
Report Lab Test Itt300
No ratings yet
Report Lab Test Itt300
37 pages
2 - Efficiency Worksheet
No ratings yet
2 - Efficiency Worksheet
4 pages
1les100001zb Specification-Guide
No ratings yet
1les100001zb Specification-Guide
13 pages
593b6740 3
No ratings yet
593b6740 3
72 pages
Factory Acceptance Cover Certificate-DS-ES of GUL
No ratings yet
Factory Acceptance Cover Certificate-DS-ES of GUL
4 pages
Physics 3204: Worksheet4: Solenoids and Magnetic Field
50% (2)
Physics 3204: Worksheet4: Solenoids and Magnetic Field
4 pages