Jabatan Kejuruteraan Mekatronik dan Robotik Fakulti Kejuruteraan Elektrik dan Elektronik Universiti Tun Hussein Onn Malaysia
BEH41103 Mechatronics Mechanism
Tutorial 1
1. A gear box has an input speed of 2000 rev/min clockwise and an output speed of 500 rev/min anticlockwise. The input power is 50kW and the efficiency is 60%. Determine the following: i. The input torque.(238.7 Nm) ii. The output power. (30kW) iii. The output torque. (573 Nm) iv. The holding torque. (334.3 Nm clockwise) 2. A gear box must produce an output power and torque of 40kW and 60Nm when the input shaft rotates at 1000 rev/min. Determine the following: i. The gear ratio. (0.1571) ii. The input power assuming an efficiency of 70%. (57.14kW) 3. A simple gear train has 2 spur gears. The input gear has 20 teeth and the output gear has 100 teeth. The input rotates at 2000 rev/min clockwise. Calculate the gear ratio and the output speed. (5 and 400 rev/min anticlockwise). 4. The input torque is 15Nm and the efficiency is 65%. Calculate the output power and the holding torque (2 042 W and 33.75 Nm clockwise) 5. Gear A is the input and revolves at 1200 rev/min clockwise viewed from the left end. The input torque is 30Nm and the efficiency is 70%. Gear A has 50 teeth Gear B has 150 teeth Gear C has 30 teeth Gear D has 60 teeth
Calculate the following:
i. ii. iii.
The output speed and its direction. (200 rev/min clockwise) The output power. (2639 W) The fixing torque. (156 Nm anticlockwise)
6. An epicyclic gear box is designed as shown. The input D rotates at 200 rev/min clockwise viewed from the left with a torque of 40Nm. The efficiency is 75%.
Calculate the following. i. The gear box (16:1) ii. The output speed and its direction (12.5 rev/min clockwise) iii. The power output. (628.3W) iv. The holding torque. (520 Nm anti-clockwise) 7. An epicyclic gear box is designed as shown. The input A rotates at 100 rev/min clockwise viewed from the right with a torque of 20 Nm. The efficiency is 65%.
Calculate the following. i. The gear box ratio. (1:5) ii. The output speed and its direction. (500 rev/min clockwise) iii. The power output. (136.1 W) iv. The holding torque. (22.6 Nm anticlockwise)
8. An epicyclic gear box as shown has fixed sun gear D and the internal gear C is the output with 400 teeth. The planet gears B have 150 teeth. The input is the arm/cage A. The output must deliver 5 kW of power at 900 rev/min. The input power is 7 kW.
Calculate the following. i. The gear box ratio. (1:5) ii. The input speed and its direction. (180 rev/min same direction as input) iii. The efficiency. (71.4%) iv. The holding torque. (424.4 Nm) 9. An epicyclic gear box as shown has a fixed sun gear B with 150 teeth. Gear C has 30 teeth and it is compounded with D which has 130 teeth. The input shaft delivers 200 W at 2400 rev/min. The gear box efficiency is 55%.
Calculate the following. i. The number of teeth on E. (50) ii. The gear box ratio. (12:1) iii. The output speed and its direction (200 rev/min in reverse direction) iv. The holding torque. (4.46 Nm)
10. An epicyclic gear box is designed as shown. The number of teeth on D is 80 and on B is 40.
The input D rotates at 300 rev/min clockwise viewed from the left and case C is allowed to rotate at 150 rev/min in the opposite direction. Calculate the speed of shaft A. (-75 rev/min)
