Catalog 1308242 Issued 3-03 (pdf revised 1-06)
P&B
RT series (DC Coil)
16 Amp PC Board Miniature Relay
File E22575 File LR15734 NR 6106
Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application.
Features
SPST through DPDT contact arrangements. Immersion cleanable and flux tight versions available. VDE 10mm spacing, 5kV dielectric, coil to contacts. UL Class F (155C) coil insulation system. Conforms to UL 508, 1873, 353 and 1950. Low profile; 15.7mm height. Sensitive coil; 400mW. Withstand surge voltage of 10,000V. Potter & Brumfield or Schrack brand.
Coil Data @ 25C
Voltage: 5 to 110VDC. Nominal Power @ 25C: 400mW. Duty Cycle: Continuous. Initial Insulation Resistance: 10,000 megohms, min., at 25C, 500VDC and 50% rel. humidity. Coil Construction: UL Class F (155C).
Coil Data @ 25C
Nominal Voltage VDC 005 006 009 012 018 024 048 060 110 DC Resistance in Ohms 10% 62 90 202 360 810 1,440 5,760 9,000 30,250 Must Operate Voltage VDC 3.5 4.2 6.3 8.4 12.6 16.8 33.6 42.0 77 .0 Nominal Coil Current (mA) 50/60Hz. 80 66.7 44.4 33.3 22.2 16.7 8.3 8.0 4.3
Contact Data
Arrangements: 1 Form A (SPST-NO) Wiring Diagram Code 1, 2,3. 2 Form A (DPST-NO) Wiring Diagram Code 5. 1 Form C (SPDT) Wiring Diagram Code 1, 2, 3. 2 Form C (DPDT) Wiring Diagram Code 5. Material: Silver-nickel 90/10. Minimum Load: 12V/100mA. Expected Mechanical Life: 10 million operations. Initial Contact Resistance: 100 milliohms max @ 1A 12VDC.
Designed to meet UL/CSA/VDE ratings @ 25C with relay properly vented. Remove vent nib after soldering and cleaning.
Ratings @ 25C Code NO/NC Load 1 10A/10A @ 277VAC 10A/10A @ 30VDC 12A/12A @ 250VAC 12A/12A @ 30VDC 3/4 HP @ 480VAC* 1/2 HP @ 240VAC* 1/3 HP @ 120VAC* 48 LRA/10 FLA @ 240VAC* TV-3 @ 120VAC* A300, 720VA @ 240VAC* 3 16A/16A @ 250VAC 20A/20A @ 277VAC 20A/20A @ 24VDC 16A/16A @ 30VDC 1 HP @ 480VAC* 1 HP @ 240VAC* 1/2 HP @ 120VAC* 60 LRA/10 FLA @ 250VAC* TV-5 @ 120VAC* A300, 720VA @ 240VAC* B300, 360VA @ 240VAC** 8A/8A @ 277VAC 8A/8A @ 30VDC 10A/10A @ 250VAC 10A/10A @ 30VDC 1/2 HP @ 240VAC* 1/4 HP @ 120VAC* 34.8 LRA/6 FLA @ 120VAC* 17 .4 LRA/5 FLA @ 240VAC* B300, 360VA @ 240VAC* TV-3 @120VAC* Type Resistive/GP Resistive Resistive/GP Resistive Motor Motor Motor Motor Tungsten Pilot Duty Resistive/GP Resistive/GP Resistive Resistive Motor Motor Motor Motor Tungsten Pilot Duty Pilot Duty Resistive/GP Resistive Resistive/GP Resistive Motor Motor Motor Motor Pilot Duty Tungsten Operations 100K 100K 30K 30K 6K 6K 6K 30K 25K 30K 50K 30K 30K 30K 6K 6K 6K 30K 25K 30K 30K 100K 100K 30K 30K 6K 6K 30K 30K 30K 25K
Max. Ambient Temp. vs. Coil Voltage
Applied Coil Voltage (% of rated nom.)
300 260 220 180 140 100 60 B 0 A 40 60 20 80 Max. Allowable Ambient Temp. (C) 100 0A 8A 12A 16A
A: Coil temperature = Ambient temperature. B: 110% of nominal coil voltage at rated contact load.
Operate Data @ 25C
Must Operate Voltage(DC): 70% of nominal. Must Release Voltage(DC): 10% of nominal. Operate Time (Excluding Bounce): 7 ms, typ., 15ms max. at nom. voltage. Release Time (Excluding Bounce): 3 ms, typ., 6ms max. at nom. voltage.
Environmental Data
Temperature Range: Storage: -40C to +105C. Operating: -40C to +85C at rated current. Vibration, Operational N.O.:0.065(1.65mm) max. excursions from 10 - 55 Hz: N.C.:0.032(0.82mm) max. excursions from 10 - 55 Hz: with no contact opening >10s.
* Form A only ** Form B only
Initial Dielectric Strength
Between Open Contacts: >1,000VAC (1 minute). Between Poles (code 5): >2,500VAC (1 minute). Between Coil and Contacts: >5,000VAC (1 minute). Surge Voltage (DC): >10,000VAC x (1.2 x 50 sec).
Dimensions are shown for
Mechanical Data
Termination: Printed circuit terminals. Enclosures: RT 1, 2, 3, 4: Flux-tight, top vented, plastic case. RT B, C, D, E: Immersion cleanable, plastic case. Weight: 0.35 oz. (10g) approximately.
Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover.
446 reference purposes only.
Dimensions are in inches over (millimeters) unless otherwise specified.
Catalog 1308242 Issued 3-03 (pdf revised 1-06)
P&B
Ordering Information (DC Coil Models)
Typical Part Number B
RT
012
1. Basic Series: RT = Miniature, printed circuit board relay. 2. Enclosure: 1 = 1 pole 12A, Pinning 3.5mm, flux-tight (Code 1). B = 1 pole 12A, Pinning 3.5mm, sealed (Code 1). 2 = 1 pole 12A, Pinning 5mm, flux-tight (Code 2). C = 1 pole 12A, Pinning 5mm, sealed (Code 2). 3 = 1 pole 16A, Pinning 5mm, flux-tight (Code 3). D = 1 pole 16A, Pinning 5mm, sealed (Code 3). 4 = 2 pole 8A, Pinning 5mm, flux-tight (Code 5). E = 2 pole 8A, Pinning 5mm, sealed (Code 5). 3. Contact Arrangement: 1 = 1 Form C (SPDT) (Requires wiring diagram codes 1, 2 or 3.) 2 = 2 Form C (DPDT) (Requires wiring diagram code 5.) 3 = 1 Form A (SPST-NO) (Requires wiring diagram codes 1, 2 or 3.) 4 = 2 Form A (DPST-NO) (Requires wiring diagram code 5.) 4. Contact Material: 4 = Silver-nickel 90/10 (standard stock). 5. Coil Voltage: 005 = 5VDC 009 = 9VDC 018 = 18VDC 048 = 48VDC 110 = 110VDC 006 = 6VDC 012 = 12VDC 024 = 24VDC 060 = 60VDC 5. Coil Insulation Classification, Brand and Case Color F = UL Class F , Potter & Brumfield Brand, Black Case Leave Blank = UL Class F , Schrack Brand, Orange Case
Our authorized distributors are more likely to stock the following items for immediate delivery.
RT114012F RTB14012F RT114024F RTB14024F RTB14005F RTB34012F RTB34024F RT314012F RT314024F RTD14005F RTD14012F RTD14024F RTD34012F RT424012F RT424024F RTE24005F RTE24012F RTE24024F RTE44012F RTE44024F
Outline Dimensions
.62 (15.7) .50 (12.7) 6X .031 X .020 (.80 X .52) 1.14 (29)
Breaking Capacity
1 Pole
50 A Contact Current B Contact Current 10 5 2 1 0.5 0.1 10 10 5 2 1 0.5 0.1 10 A B 50
2 Pole
2X .020 X .020 (.52 X .52) .17 (4.3)
20
50 100 DC Voltage
200 300
20
50 100 DC Voltage
200 300
PC Board Layouts (Bottom View)
1 Pole 12A 3.5mm
.051 DIA. (1.30) .276 (7 .0) .800 (20.32) .400 (10.16) .800 (20.32)
1 Pole 12A 5mm
.051 DIA. (1.30)
1 Pole 16A 2 Pole 8A 5mm
.051 DIA. (1.30)
A: 16A Version. B: 12A Version.
A: 1 Contact. B: 2 Contacts in series.
Contact Life for Resistive AC Load (Typical)
.400 (10.16) .800 (20.32)
107
A: 8A Model B: 12A Model C: 16A Model
Operations
106 B 10
5
051 DIA. (1.30)
.300 (7 .62)
.051 DIA. (1.30)
.300 (7 .62)
.051 DIA. (1.30)
.300 (7 .62)
Code 1
Code 2
Code 3 & 5
Notes: 1. On single throw models, only necessary terminals are present. 2. With the recommended PCB hole sizes, a grid with a pattern from 0.0984 to 0.1 in (2.5 - 2.54 mm) can be used.
104 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 Breaking Capacity (kVA)
Wiring Diagrams (Bottom View)
1 Pole 12A 1 Pole 16A 2 Pole 8A
Note: Data from 250VAC @ 70C.
Codes 1 & 2
Code 3
Code 5 Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: 447 Refer to inside back cover.
Note: On single throw models, only necessary terminals are present.
Dimensions are shown for reference purposes only.
