IEMDC 2005 - IEEE International Electric Machines and Drives Conference

Copyright and Reprint Permission: Abstracting is permitted with credit to the source. Libraries are permitted to photocopy beyond the limit of U.S. copyright law for private use of patrons those articles in this volume that carry a code at the bottom of the first page, provided the per-copy fee indicated in the code is paid through Copyright Clearance Center, 222 Rosewood Drive, Danvers, MA 01923. For other copying, reprint or republication permission, write to IEEE Copyrights Manager, IEEE Operations Center, 445 Hoes Lane, P.O. Box 1331, Piscataway, NJ 08855-1331. All rights reserved. Copyright 2005 by the Institute of Electrical and Electronics Engineers, Inc. IEEE Catalog Number: 05EX1023C ISBN: 0-7803-8988-3 Additional copies of this publication are available from: IEEE Service Center P.O. Box 1331 445 Hoes Lane Piscataway, NJ 08854-4150, USA +1 800 678 IEEE (+1 800 678 4333) +1 732 981 1393 +1 732 981 9667 (FAX) Email: [email protected] For CDROM support, please contact: webstracts.com Services, Inc. 2590 Shelley Road North Vancouver, BC Canada V7H 1J9 +1 604-818-4696 [email protected]

Technical Co-Sponsoring Societies

CD Use Instructions
Accessing Papers The papers on this CD-ROM are linked together with this Main PDF file using hypertext links on the paper titles (appears as blue text). A listing of papers organized by session can be found in the Technical Program section of this file. In the Author index, each listed author name includes a list of hypertext titles linked to the papers. Clicking the blue text with your mouse will activate the link and the trigger the loading of the selected paper. Within each paper, a "Return to Previous" bookmark will be visible, use this bookmark to re-load this Main PDF file. More details about using this CD-ROM can be found in the "Navigating this CDROM" section below. Before you can take full advantage of the search capabilities built into this CD-ROM, you need to ensure that Acrobat Reader + Search 4.0 or better is installed on your computer. You can check that the search plug-in is installed by looking for the "Search" menu under "Edit" on the menu bar of the Acrobat program window. This CD-ROM includes installers for Acrobat software for several popular platforms, check the "Install" folder for an executable compatible with your computer. More details about the search capabilities can be found in the "Searching" section on the following page. Navigating This CDROM In addition to the paper title hypertext links, you can use the "Bookmarks" at left to navigate the documents on this CDROM. Ensure that the Bookmarks are visible by selecting "Window" -> "Show Bookmarks" on the menu bar. Another feature of Acrobat useful for navigating are the arrowed buttons on the Acrobat toolbar. These buttons allow you to move backwards and forwards page by page, and jump to the last or first page of an article, and from article to article. Ensure that the toolbar is visible by selecting "Window" -> "Show toolbar" from the menubar. Navigation links are also provided in larger white text found in the bottom border of this Main PDF file, and these links work in the same fashion.

Select from the "Edit" menubar -> "Search" -> "Query" to enable a window into which text strings can be entered. Ensure that the correct index file is being searched, press the "Indexes" button for the list of available indexes. Ensure that a file called "index.pdx (found at the root of the CD-ROM) is listed, and if not, then "add" it to the list. After entering your search string, press the "Search" button and all words in all documents will be scanned for matches. For optimal searching, check that the "Show Fields" option is turned on, this preference can be found under "File" -> "Preferences" -> "Search", then change "Show top 100 Documents" to "Show top 1000" to allow maximum returns from your searches. Troubleshooting Please check the "readme.txt" file at the root of this CD-ROM for hints and known issues with Acrobat. Check the Acrobat Reader Guide under the "Help" menu for detailed instructions on all features discussed above, and more!

Organizing Committee
General Chair Program Co-Chairs Prof. Hamid Toliyat Texas A&M University Prof. Babak Fahimi University of Texas at Arlington Prof. Steven Pekarek Purdue University Finance Chair Exhibits Chair Publication Chair Publicity Chair Dr. Thomas W. Nehl Delphi Corporation Dr. Edward Lovelace SatCon Technology Co. Dr. Mehdi Abolhasani Wavecrest Labs Prof. Longya Xu Ohio state University

On-line Submission Dave Pataky Management webstracts.com

International Advisory Board

Prof. F. Rahman Australia Prof. R. Belmans Belgium Prof. M.A. Rahman Canada Prof. L. Moran Chile Prof. F. Blaabjerg Denmark Prof. G. Capolino France Prof. J.M. Pacas Germany Prof. K. Gopakumar India Prof. J. Faiz Iran Prof. A. Vagati Italy Prof. A. Chiba Japan Prof. S-k. Sul Korea Prof. Marques-Cardoso Portugal Prof. I. Boldea Romania Prof. A. Khambadkone Singapore Prof. T-h. Liu Taiwan Prof. A. Hava Turkey Prof. T.J.E. Miller UK Prof. S. Williamson UK Prof. N.A. Demerdash USA Prof. T.A. Lipo USA

Welcome
On behalf of the Steering Committee, I offer you the warmest of welcomes to San Antonio, Texas, and the 2005 IEEE-IEMDC. This year the conference is being hosted by a Steering Committee representing several universities and industries. Our widely dispersed group is doing our part to support the electric machines and drives industries, which will undoubtedly be improved by your participation in this year's conference. The response to the Call for Papers for the 5th IEMDC was tremendous. We received 460 digests. After thorough reviews, 320 papers were scheduled for oral and poster presentations by the Program Committee. The schedule includes a half day keynote presentations from various leading industries and also six special sessions. This years conference is being held in San Antonio located in the center of our state. It draws its character from the strong European flavor of the city. Our conference hotel will be the Hilton Palacio del Rio, which is located on the cities unique feature, the River Walk. The River Walk was changed from a flood-prone waterway in the 1920's to a below street level treeshaded community of restaurants, hotels, cafes, shops and miles of sidewalk paths along the San Antonio River through the city center and neighborhoods. Within a few minutes from the Hilton is Alamo Park, which contains the restored Alamo Mission where one of the most famous battles for Texas' independence was fought. Try to arrive early Sunday so that you can join your colleagues for our welcome reception at the Hilton. On Monday evening, we will hold our special reception on Hilton Terrace. On Tuesday evening we will have our banquet at the Holton Corte Real which I am sure you will enjoy it. The steering committee and I look forward to seeing you and hope that you will have a fun and memorable experience as well as a scientifically productive week in San Antonio. Hamid Toliyat General Chair, 2005 IEMDC

Welcome
Welcome to the International Conference on Electric Machines and Drives (IEMDC) 2005 in San Antonio, Texas. The original IEMDC was held in 1997. Eight years later it has evolved into a comprehensive technical conference addressing state-of-the-art technologies in electromechanical energy conversion. Undoubtedly, new advances in energy conversion and processing will play a major role in shaping the world for many years to come and hence deserves due attention by governments, academia, and industry. We have noticed this trend in an overwhelming number of excellent submissions. Our technical program includes an interesting variety of topics ranging from micro-electromechanical actuators to large synchronous turbo-generators. The technical program will last three days, from May 16th through May 18th. Four tutorials covering several topics of interest will be held on Sunday, May 15th. We encourage you to stop by and see our representative booths where several industries will be presenting hardware and software necessary for electric machines and drives design and control. In addition to twenty five technical sessions, we have organized six technical tracks addressing special topics of interest. We extend a sincere thank you to the members of organizing committee, international advisory board, reviewers, session organizers, and students who have offered their time, expertise, and ideas throughout this process. It is our hope that at the end of this conference, we would not only gain knowledge to better face the challenges ahead, but also bring back the valuable relationships forged during the conference. We look forward to meeting you in San Antonio.

Babak Fahimi Technical program Co-chair

Steve Pekarek Technical program Co-chair

Tutorials
Design, application, and Installation of IGBT Adjustable Speed AC Drives Dr. Russel J. Kerkman, Engineering Consultant, Rockwell Automation Abstract: ADJUSTABLE-SPEED drives (ASD's) with third generation insulated gate bipolar transistors (IGBT's) dominate the low-voltage adjustable-speed industrial market. The fast rise times of third-generation IGBT's have provided reduced package size and, in combination with high-speed digital signal processors (DSP's), provide performance characteristics comparable to dc drives. However, the fast rise times create significant problems, for example, motor overvoltages, communications interference, and bearing currents. The seminar will address adverse effects generated by modern IGBTs and explore techniques to mitigate them. Areas to be covered include bearings, motors, application equipment, drive sensors, and inverter control. Modern Automotive Systems: Power Electronic and Motor Drive Opportunities and Challenges Dr. Ali Emadi, Illinois Institute of Technology (IIT) Abstract: More electric vehicle (MEV) concept emphasizes utilizing of electrical power to drive more automotive conventional systems and to facilitate new introduced luxury loads. Improving fuel economy, emissions, reliability, and performance are the main motivations towards the MEV concept. In addition, hybrid electric vehicles (HEVs) are promising the most practical solution to reach very high fuel economy as well as very low emissions. Auto manufacturers are also researching fuel cell vehicles (FCVs). FCVs could be considered as an advanced version of the battery powered vehicles in automobiles with all-electric drive train. This presentation intends to focus on engineering fundamentals, power electronic and motor drive applications, as well as state-of-the-art research and development in the areas of MEVs, HEVs, and FCVs. This tutorial addresses the practical issues in automotive power systems. Furthermore, a brief description of the conventional automotive systems and electric and hybrid electric vehicles including series and parallel hybrid propulsion systems will be given. After presenting a comprehensive review of current status and future trends in automotive power electronics and motor drives, this presentation investigates the overall efficiency of HEVs and FCVs. Well-to-wheels efficiency is considered and it is shown that FCVs are not more efficient compared to HEVs. In addition, it will be explained that fuel cells are facing serious practical problems for land vehicles. The infrastructure for FCVs is not available while MEVs and HEVs are like conventional cars with much better fuel economy. In fact, other than higher miles per gallon, improved performance, and lower emissions, MEV and HEV drivers do not face any difference compared to the conventional cars. There is no drastic change in manufacturing MEVs and HEVs for auto industry as well. Other than the fuel infrastructure, on-board hydrogen storage and fuel reforming systems are other main problems to be solved

for FCVs. These require long-term research and development. Significant improvements are also needed to achieve acceptable driving performance and range. Start-up time required for FCVs is also too long. Dynamic interactions between fuel cells, batteries, and power converters causing stability problems are also yet to be addressed. Other than the technical difficulties, which are not clear to be solved in the next 10-20 years, fuel cells and their required power electronic interface are too expensive compared to the MEVs and HEVs. In summary, FCVs are not currently economically feasible. Even if they are practical, their overall efficiency is less than HEVs. Introduction to Object-Oriented Simulation of Drives Patrick L. Chapman and Jonathan W. Kimball, University of Illinois at Urbana-Champaign Abstract: In this tutorial we will discuss an uncommon but interesting approach to simulating electric drives. The method involves building state models of drives from fundamental components. Each component is implemented by the simulationist by only defining the terminal variables and constituent equations. The components are then connected according user wishes with simple "connect" statements. There is no implied definition of input or output - the model does not follow typical signal-flow or block diagram conventions. The model-building algorithm then composes a minimal set of state equations, which can then be integrated with a wide variety of integration algorithms. This eliminates much modeling effort and redundancy on the part of the user. Furthermore, more complicated components can be constructed from simpler ones in object-oriented fashion. From a practical standpoint, this yields convenient variable naming and referencing, as well as excellent modularity. The tutorial will begin with an overview of simulation methods for electric drives that are currently used, with discussion of relative merits. Then, we will present a theoretical discussion of how object-oriented code can be used to generate streamlined state models for switched systems (such as electric drives). Next, we will demonstrate how a commercial software package (Dymola) is used to implement object-oriented modeling. Finally, we show several simulation examples of electric drives that demonstrate the promised advantages. Control of the BLDC Machine with Improved Performance Mehrdad Ehsani, Texas A&M University Abstract: The Brushless DC (BLDC) motor drive system is one of the most popular advanced motor drives. High power density, very compact geometry and high efficiency, along with a simple control are among the main attractions for replacing many adjustable speed applications with this technology. BLDC machine is now mature and increasingly used in automotive, military, traction, aerospace, industrial, and consumer products. In this short course, which is for practicing engineers as well as advanced researchers, we will

address in detail the basics of the BLDC machine, comparing its features with those of other machines, its control strategies and conventional sensorless control techniques. Moreover, Advanced BLDC machine control topics including our novel sensorless position detection technique based on a new physical concept will be presented. Advanced controls are used for improving reliability in case of sensor failure and to maximize the power density, efficiency, and minimize the size and weight of the BLDC generator. The course will end with a discussion of BLDC machine drive application trends. Course topics: Basics of the BLDC machine Salient features of the BLDC Control strategies Conventional sensorless control techniques Advanced sensorless BLDC controls for sensorless high efficiency Advanced BLDC generator control BLDC machine drive application trends

Exhibitions
Ansoft Corporation Ansoft Corporation offers the premier solution for the design and analysis of electric machines and drive systems. See demonstrations of Maxwell, our powerful finite-element solver that includes 3D motion capability; and SIMPLORER, our flexible, multi-domain system simulation software that is ideally suited for power electronics and drive design. You will not find a more powerful, easy-touse integrated solution. Come learn how to SOLVE your toughest design problems! Vector Fields Inc. Vector Fields is a specialist company dedicated to the development and application of computer software for designing electromagnetic devices. Customers include many of the worlds largest corporations, government research laboratories and successful companies, who recognize the importance of sound conceptual design. During the IEMDC Conference and Exhibition, Vector Fields will be highlighting its OPERA software. OPERA is used to simulate rotating systems, and includes nonlinear materials, external drive systems, as well as effects such as friction. Recent enhancements to OPERA also allow the effects of Demagnetization and Temperature to be considered when simulating the performance of electrical machines. Using OPERA to compute and predict electromagnetic performance with confidence gives Vector Fields software users the ability to produce competitive and innovative products, while keeping lead times and costs to a minimum. A Demo version of the software is available upon request contact Vector Fields to get your free copy. MagneForce Software Systems Produces software for design and simulation of rotating electric machinery. MagneForce products combine Finite Element techniques together with various time based circuit models to provide a total electric machine design environment. We analyze both the machine as well as any associated drive/load circuitry to produce both steady-state and transient results. MagneForce simulators compute directly machine performance parameters such as voltages, currents, torque, power and efficiency. Output from MagneForce simulators also consists of the entire set of machine magnetic parameters including inductances, flux density distributions, demagnetization plots and iron loss distributions. This is all done in an easy to learn and use Windows environment. Infolytica Co. Infolytica offers state-of-the-art 2D/3D Electromagnetic simulation software for magnetic, electric, and thermal analyses. Engineers from a wide range of industries use Infolyticas software to design and analyze applications such as electromechanical devices, nondestructive testing (NDT), induction heating, power electronics, sensors, and industrial transformers. Full feature scripting and

parameterization make Infolytica products the flexible solution for your electromagnetic simulation needs. Infolytica also offers a truly innovative design tool for optimizing electromagnetic or thermal devices, using both continuous-valued and discrete-valued variables. Infolyticas electromagnetic simulation software: Reduces manufacturing costs by optimizing your design Reduces time-to-market Reduces the need to fabricate prototypes Improves hardware design Helps engineers meet tight deadlines Allows for quick simulation of prototype variations

Magsoft Co. CAE simulation software for computing electrical, electromagnetic, thermal, and electromechanical behavior, including Flux 2D/3D for transient electromagnetic/electromechanical, and thermal FEM analysis PSCAD for sophisticated real-time transient electric circuit, power system/quality explorations Motor-CAD for simulating the 3D thermal transient response in electric machines GiD for personal pre- and post-processing We build relationships with quality products, specialized training, and agile technical support and consulting. Motorsoft Co. THE LEADING RESOURCE SUPPLIER OF MOTION CONTROL DESIGN TOOLS FOR ELECTRIC MOTOR ENGINEERS, STUDENTS, EDUCATORS & MARKETING PROFESSIONALS. These include SPEED Motor Design Simulation Software, JMAG Electromagnetic Field Analysis Software, WSCAD Electrical and Electronic Design Software, IronCAD 3D CAD Design, VisSim Modeling & Simulation of Complex Systems, Titan Transformer and Inductor Design Software, technical books, marketing reports, motor prototyping accessories, training and seminars. We distribute and manufacture AC, SR, PM brushless and Brushless Servo Motors, various drives and parts. We also manufacture a small dynamometer kit to test, teach & demonstrate motor/drive technology.

Additional Information
Author Information Authors that are presenting in oral sessions are required to attend the author breakfast on the morning of their presentation. At that time they are expected to provide an electronic copy of their presentation to the session chair (via a CD or USB drive). All presentations must be in either powerpoint (.ppt) or PDF (.pdf) format. Travel Information The San Antonio International Airport is serviced by all major airlines. Special discounted airfares for the 2005 IEEE IEMDC05 conference have been negotiated by IEEE Global Travel Services. Travel arrangements using the negotiated air carriers or the carriers of your choice can be made through IEEE Global Travel Services by calling between the hours of 8:30 a.m. and 5:50 p.m. EST Monday through Friday. Within the US and Canada, call 800-879-4333; and outside the US and Canada, call 732-562-5387. Or, you may visit their on-line travel service web site http://www.ieeetravelonline.org/IEMDC/. This secure site offers simple and convenient service through which you can search, reserve, and ticket your travel anytime, anywhere. You may also fax requirements to the IEEE Global Travel Services at 732-562-8815. When faxing, please be sure to include your travel dates, departure and return times, and phone and fax numbers. A Travel Counselor will contact you promptly. Airport Transportation The San Antonio International Airport is located approximately 12 miles from the Hilton Palacio del Rio at the juncture of the Northeast Loop 410 and Highway 281 North. Average charge for a taxi to/from the airport to the hotel is $15.00-$20.00 for one to four people.

Shuttle service at San Antonio International Airport is supplied by SATrans (San Antonio Transit). SATrans offers a curbside service to various downtown hotels from the transportation area outside the baggage area of each terminal. Current charges for SATrans to/from the airport are about $8.00 one-way per person and about $14.00 round-trip per person. Hotel Information The conference hotel will be the Hilton Palacio del Rio on the Riverwalk. As the longest consecutive recipient of the AAA Four Diamond Award in San Antonio, Hilton offers unmatched service and extensive guest amenities, such as private balconies in all rooms. Spanish provincial dcor features Mexican onyx and brass, and inlaid mesquite floors with white oak. The Hilton is bordered on one side by the San Antonio River and is a few minutes away from the Alamo Plaza which contains the famous Alamo Mission. Shopping, entertainment and over 70 restaurants are nearby. Minutes to La Villita Spanish Village, King William Historic District, Hemisfair Plaza, San Antonio Museum of Art and Rivercenter Mall. San Antonio Zoo, Japanese Sunken Gardens, Sea World of Texas and Fiesta Texas are also close by. A block of rooms have been set aside at a special conference rate of $172 + tax per night. Reservations can be made by accessing http://www.palaciodelrio.hilton.com (use "Group Number": IEE), by calling the San Antonio Hilton Palacio del Rio directly (210) 222-1400 or by calling the Hilton central reservation number (800) HILTONS in the US and Canada. In other countries, please call Information and request the local toll free Hilton central reservation number. Hilton Hotel parking is available at a very reasonable $15 per day rate. However, because the conference is being held in the center of San Antonio, which is an easy walking distance or a direct trolley ride to the main city sights, we do not recommend renting a car.

DRIVING DIRECTIONS HILTON PALACIO DEL RIO

200 South Alamo Street San Antonio, Texas 78205 (210) 222-1400

From the South:

-I 37 North and take Commerce Street exit -Turn left at Commerce Street -Follow Commerce Street to Alamo Street (3 lights) -Turn left on Alamo Street -Hotel is at the corner of Alamo Street and Market Street

From the West:

-I 10 East to I 37 South -I 37 South and take Commerce Street exit -Turn right at Commerce Street -Follow Commerce Street to Alamo Street (3 lights) -Turn left on Alamo Street -Hotel is at the corner of Alamo Street and Market Street

From the North:

-I 35 or 281 South to I 37 South -I 37 South and take Commerce Street exit -Turn right at Commerce Street -Follow Commerce Street to Alamo Street (3 lights) -Turn left on Alamo Street -Hotel is at the corner of Alamo Street and Market Street

From the East:

-I 10 West to I 37 North (Downtown) -I 37 North and take Commerce Street exit -Turn left on Commerce Street -Follow Commerce Street to Alamo Street (3 lights) -Turn left on Alamo Street -Hotel is at the corner of Alamo Street and Market Street

IEMDC05 Downtown Map

List of Reviewers
Abdelhamid, Tamer Helmy Abdollahi, Ehsan Abu-Rub, Haithem Afjei, Ebrahim Ahmad, Mukhtar Bacha, Faouzi Bahramgiri, Maryam Beccue, Philip Beig, Abdul Rahiman Bellini, Alberto Benarous, Maamar Benbouzid, Mohamed El Hachemi Boglietti, Aldo Bolognesi, Paolo Botan, Corneliu Bouscayrol, Alain Brauer, John Cale, Jim Cancelliere, Piergiacomo Cao, Wenping Carlson, Renato Cascella, Giuseppe Leonardo Cavagnino, Andrea Chan, Tze-Fun Chancharoensook, Phop Chen, Xikun Corra, Maurcio Corzine, Keith Cunha, Carla Cupertino, Francesco De Belie, Frederik De Paula, Hlder Deken, Bradley Desai, Piyush College of Technological Studies, KUWAIT Amirkabir University of Technology, IRAN Birzeit University, ISRAEL Shahid Beheshti University, IRAN aligarh muslim university, INDIA ESSTT, TUNISIA Niroo Research Institute, IRAN Purdue University, USA National Institute of Technology Suratkal, INDIA University of Parma, ITALY Goodrich Corporation, UK IUT of Brest, University of Western Brittany, FRANCE Politecnico di Torino, ITALY University of Pisa, ITALY Technical University , ROMANIA University of Lille, FRANCE Milwaukee School of Engineering, USA Purdue University, USA University of Cassino, ITALY Sheffield University, UK UFSC, BRAZIL Politecnico di Bari, ITALY Politecnico di Torino, ITALY The Hong Kong Polytechnic University, CHINA The University of New South Wales, AUSTRALIA Huazhong University of Science & Technology , CHINA Universidade Federal de Campina Grande, BRAZIL University of Missouri - Rolla, USA Universidade Federal do Esprito Santo - UFES, BRAZIL Technical Univarsity of Bari, ITALY Gent University (UGent), BELGIUM Universidade Federal de Uberlndia, BRAZIL Purdue University, USA Illinois Institute of Technology, USA

Di Gerlando, Antonino Diallo, Demba Diaz, Harold Jos Diong, Bill Dubey, Rahul El-Refaie, Ayman Emadi, Ali Fahimi, Babak Faiz, Jawad Fatiha, Zidani Ferdowsi, Mehdi Flores Filho, Aly Ferreira French, Chris Friedrich, Guy Frosini, Lucia Fu, Weinong Fu, Zhenxing Fuengwarodsakul, Nisai Ge, Hongjuan Gieras, Jacek Gong, Xiaofeng Gopakumar, K. Guanlin, Li Gupta, Amit Hao, Lei Hess, Herb Hofmann, Heath Hossain, Syed Hutchison, Nathen Ibrahim, Yasser Ide, Kazumasa Iles-Klumpner, Dorin Iyer, Narayanaswamy. P.R. Jacobina, Cursino Jansen, Helm Jayabalan, Ranjit Joshi, Raghuveerraj

Politecnico di Milano, ITALY Laboratoire de Gnie Electrique de Paris, FRANCE Universidad del Valle, COLOMBIA Univ of Texas at El Paso, USA IIT Roorkee, INDIA University of Wisconsin Madison, USA Illinois Institute of Technology, USA University of Missouri-Rolla, USA University of Tehran, IRAN University of Batna, ALGERIA University of Missouri-Rolla, USA Federal University of Rio Grande do Sul, BRAZIL Newcastle University, UK University of Technology of Compiegne, FRANCE Universita' di Pavia, ITALY Ansoft, USA Visteon Corp, USA RWTH Aachen University, GERMANY China Electrotechnical Society, AFGHANISTAN United Technologies Research Center, USA Delta Power Electronics Center, CHINA Indian Institute of Science, INDIA Harbin Institude of Technology , CHINA National University of Singapore, SINGAPORE Wavecrest labs, USA University of Idaho, USA Penn State University, USA Globe Motors, USA Purdue University, USA Aerospace Research Center, EGYPT Hitachi Research Laboratory, Hitachi Ltd., JAPAN ebm-papst St. Georgen, GERMANY University of Technology Sydney, AUSTRALIA Federal University of Campina Grande, BRAZIL Eindhoven University of Technology, NETHERLANDS University of Texas at Arlington, USA College of Technology and Engineering, INDIA

Jurado, Francisco Khersonsky, Yuri Khosrowshahli, Elham Kim, Jang-Mok Kiyoumarsi, Arash Klontz, Keith Koenig, Andreas Kong, Xuejuan Krishnamurthy, Mahesh Kusko, Alexander Kwon, Chunki Lanfranchi, Vincent Lee, Hyung-Woo Lee, Kevin Lee, Sang Bin Leonardi, Franco Levi, Emil Lewis, Tim Li, Weichao Li, Jingchuan Lin, Chang-Shien Lionel, Vido Liu, Liming Liu, Tian-Hua Loop, Benjamin Lu, Bin M.A., Jabbar Manrique Castillo, Paul Andrs Markovic, Miroslav Matin, Kaiser Mazauric, Vincent Mendes, Andr Mezani, Smail Mihet-Popa, Lucian Mu, Xinhua Mueller, Markus Muetze, Annette

University of Jan, SPAIN Consultant, USA Niroo Research Institute, IRAN Pusan National University, KOREA Isfahan University of Technology, IRAN Fisher Electric Technology, USA Purdue University, USA Huazhong University of Science and Technology, CHINA University of Texas at Arlington, USA Exponent Failure Analysis Associates, Inc., USA Purdue University, USA laboratoire d'electromecanique de Compiegne, FRANCE Cornell University, KOREA Eaton, USA Korea University, KOREA Ford Motor Co., USA Liverpool John Moores University, UK United Defense LP, USA Naval University of Engineering, CHINA The Ohio State University, USA North Taiwan Institute of Science and Technology, TAIWAN SATIE, IUPGE Cergy, FRANCE College of Electrical and Electronic Engineering, CHINA National Taiwan University of Science and Technology, TAIWAN Purdue University, USA Georgia Institute of Technology, USA National University of Singapore, SINGAPORE Universidad del Valle, COLOMBIA EPFL, SWITZERLAND Wavecrest Labs, USA Schneider Electric, FRANCE University of Coimbra, PORTUGAL University of Sheffield, UK Politechnica University of Timisoara, ROMANIA Nanjing University of Aeronautics and Astronautics, CHINA University of Edinburgh, UK University of Wisconsin Madison, USA

Nagorny, Aleksandr Nandi, Subhasis Niazi, Peyman Ohm, Dal Ojo, Olorunfemi Oslinger , Jos Pekarek, Steve Pereira, Dionisio Perez-Pinal, Francisco J. Perriard, Yves Phyu, Hla Nu Ponce-Cruz, Pedro Popescu, Mircea Povinelli, Richard Pucci, Marcello Rabinovici, Raul Rahman, Ziaur Rajaei Salmasi, Farzad Rathore, Akshay Regep, Richard Ren, Wamkeue Roger, Daniel Rosu, Marius Salem, Sam Salminen, Pia Schofield, Nigel Sebastian, Tomy SEMAIL, Eric Shima, Kazuo Sicard, Pierre Silva, Viviane- Cristine Sivaprakasam, Arumugam Smith, Alexander Sobczyk, Tadeusz Soltani, G.Reza Spiteri Staines, Cyril Sudhoff, Scott

National Research Council at NASA Glenn Research Center, USA University of Victoria, CANADA Texas A&M, USA Drivetech, Inc., USA Tennessee Tech University, USA Universidad del Valle, COLOMBIA Purdue University, USA Federal University of Mato Grosso do Sul, BRAZIL IPN, ESIME UC, Universidad Autonoma de San Luis Potosi, MEXICO Ecole Polytechnique Fdrale de Lausanne, SWITZERLAND Institute of High Performance Computing, SINGAPORE ITESM CCM, MEXICO Glasgow University, UK Marquette University, USA CNR, ITALY Ben-Gurion University of The Negev, ISRAEL WaveCrest Laboratories, USA University of Tehran, IRAN University of Victoria, CANADA R. Regep -Electrical Engineering, ISRAEL Universit du Qubec en Abitibi-Tmiscamingue, CANADA LSEE - FSA, FRANCE Ansoft Corporation, USA GE Energy, USA Lappeenranta University of Technology, FINLAND The University of Manchester, UK Delphi Steering Systems, USA L2EP-ENSAM, FRANCE Hitachi Research Lab., Hitachi, Ltd., JAPAN Universit du Qubec Trois-Rivires, CANADA University of So Paulo (USP), BRAZIL Kongu Engineering College, INDIA The University of Manchester, UK Cracow University of Technology, POLAND Niroo Research Institute (NRI), IRAN University of Malta, MALTA Purdue University, USA

Tapia, Juan A. Thelen, Robert Toliyat, Hamid Touhami, Omar Wanbing, Jin Wang, Aimeng Wang, Jiabin Wei, Jiang Weinger, Alexander Wendling, Philippe Wiedenbrug, Ernesto Wolbank, Thomas Wrobel, Rafal Wu, Long Wu, Peng Wu, Ying Xu, Z Yamazaki, Katsumi Yang, Bo-Suk Yeh, Chia-Chou You, Keping Zeroug, Houcine Zhang, Yu Zhang, Jun Zhang, Jinhui Zheng, Liping Zhu, Weidong Zhu, Z.Q. Zhu, Chun Ziling, NIE Zobaa, Ahmed

University of Concepcion, CHILE University of Texas at Austin, USA Texas A&M University, USA Polytechnic National School, ALGERIA Delta Electronics Center(Shanghai), CHINA North China Electric Power University, CHINA University of Sheffield, UK University of Science and Technology of China, CHINA Rockwell Automaton, RUSSIAN FEDERATION Magsoft Corporation, USA Baker Instrument Company, USA Vienna University of Technology, AUSTRIA University of Bristol, UK Georgia Institute of Technology , USA Nanyang Technological University, SINGAPORE Montana State University, USA University of New South Wales, AUSTRALIA Chiba Institute of Technology, JAPAN Pukyong National University, KOREA Marquette University, USA The University of New South Wales, AUSTRALIA University of Sciences and Technology Houari-Boumediene, ALGERIA HuaZhong University of Science and Technology, CHINA The University of New South Wales , AUSTRALIA University of Kentucky, USA University of Central Florida, USA University of Missouri-Rolla, USA University of Sheffield, UK Tsinghua University, CHINA The University of Navy Engineering, CHINA Cairo University, EGYPT

Technical Program
Sunday May 15, 2005 Seminar 1: Design, application, and Installation of IGBT Adjustable Speed AC Drives Presenter: Russel J. Kerkman, Rockwell Automation La Vista, 1:30pm - 5:30pm Seminar 2: Modern Automotive Systems: Power Electronic and Motor Drive Opportunities and Challenges Presenter: Ali Emadi, Illinois Institute of Technology La Reina, 1:30pm - 5:30pm Seminar 3: Introduction to Object-Oriented Simulation of Drives Presenters: Patrick Chapman and Jonathan Kimball, University of Illinois at Urbana-Champaign La Princesa, 1:30pm - 5:30pm Seminar 4: Control of the BLDC Machine with Improved Performance Presenter: Mehrdad Ehsani, Texas A&M University La Duquesa, 1:30pm - 5:30pm

Monday May 16, 2005 Welcome & Plenary Session Chair: H. A. Toliyat, Texas A&M University Session Co-chair: B. Fahimi, University of Texas Arlington Salon del Rey North+Central, 8:00am - 9:30 am Challenges in High Power Machine Design T. Ericsen; Program Officer for Electrical Science & Technology, Office of Naval Research, USA Boeing 787 No-Bleed Electrical Systems Architecture F. Nozari; Technical Fellow, Boeing, Seattle, WA, USA High Temperature Superconducting Motor Development R. Schiferl; Director of Engineering, Rockwell Automation, Cleveland, OH, USA Mechatronics for Automotive Active Safety N. Boules; Director, Dynamics Innovation Center & Materials Engineering, Delphi Corp., USA Challenges and Opportunities in Appliance Industries - An Electrical Drive and Control Perspective F. Ashrafzadeh; Whirlpool, Benton Harbor, MI, USA The Continuing Revolution of PM Motors and Generators P. Mongeau; Vice President Technology, DRS Electric Power Technologies, Inc., Hudson, MA, USA

Poster Session 1 - Diagnostics and Fault Detection Salon del Rey South, 9:30am - 10:30am Condition Monitoring of Generator Stator Winding Inter-Turn Short Circuit Fault Based on Electrically Excited Vibration H.M. Li, S.T. Wan, Y.G. Li, A.M. Wang; North China Electric Power University, CHINA Experimental High Frequency Parameter Identification of AC Electrical Motors A. Boglietti, A. Cavagnino, M. Lazzari; Politecnico di Torino - Dip. Ing. Elettrica, ITALY A Novel Internal Fault Analysis of a Brushless DC Motor Using Winding Function Theory H.W. Lee1, T.H. Kim2, C.H. Choi3; 1Hanyang University, KOREA, 2Texas A&M University, USA, 3R&D Center, POSCON Corporation, KOREA Detection of Bearing Faults in Cage Induction Motors Fed by Frequency Converter using Spectral Analysis of Line Current O. Duque1, M. Prez2, D. Morigo1; 1University of Valladolid, SPAIN, 2Renfe, SPAIN Thermal Behaviour of a Three-Phase Induction Motor Fed by a Fault Tolerant Voltage Source Inverter A.S.M. Mendes1, X.M. Lpez Fernndez2, A.J. Marques Cardoso1; 1University of Coimbra, PORTUGAL, 2University of Vigo, SPAIN A Condition Monitoring Vector Database Approach for Broken Bar Fault Diagnostics of Induction Machines C.-C. Yeh, B. Mirafzal, R.J. Povinelli, N.A.O. Demerdash; Marquette University, USA Extraction of Induction Motor Fault Characteristics in Frequency Domain and Fuzzy Entropy S.H. Lee1, S.S. Kim1, J.M. Kim1, S.H. Lee2, Y.M. Oh2, C.H. Choi2, J.S. Kim2; 1Pusan Univ., KOREA, 2POSCON Co. Ltd., KOREA A Prototype Electrical Actuator for Aircraft Flaps and Slats J.W. Bennett1, B.C. Mecrow1, A.G. Jack1, D.J. Atkinson1, S. Sheldon2, K. Everndon2, G. Mason3, C. Sewell3, D. Cudley4; 1University of Newcastle, UK, 2FR Hi-Temp, UK, 3BAE Systems, UK, 4BAE Systems Regional Aircraft, UK Development of a Solution for an Overheating Problem and Reactive Power Increase in the Three Generator Units of a Hydroelectric Power Plant J.A. Palacios, J.L. Oslinger, H.J. Daz, G.A. Jaramillo ; Research Group in Energy Conversion , COLOMBIA

Design and Performance of a 20kW, 100rpm, Switched Reluctance Generator for a Direct Drive Wind Energy Converter M.A. Mueller; University of Edinburgh, UK Failure Prognosis for Permanent Magnet AC Drives Based on Wavelet Analysis W.G. Zanardelli, E.G. Strangas, S. Aviyente; Michigan State University, USA A Hybrid Converter for High Speed Operation of Switched Reluctance Motor Drives P. Bazzaz1, E. Afjei1, H.A. Toliyat2; 1Shahid Beheshti university, IRAN, 2Texas A&M University, USA 3D Inductance and Impedance Determination Taking Skin Effect into Account I.S. Stefanini, M.M. Markovic, Y.P. Perriard; Swiss Federal Institute of Technology, SWITZERLAND The Impact of Wavelet Selection on Transient Motor Current Signature Analysis H. Douglas, P. Pillay; Clarkson University, USA Research of the Overheating in Three Synchronous Generators of 71,9 MVA. H.J. Diaz, J.L. Oslinger; Research Group in Energy Conversion , COLOMBIA Original 2D Cylindrical Harmonics Method for Identification of the Near Magnetic Stray Field of an Electrical Motor L. Schmerber1,2, L.L. Rouve1, A. Foggia2; 1Laboratoire de Magnetisme du Navire, FRANCE, 2Laboratoire d Electrotechnique de Grenoble, FRANCE Two-Port Circuits Based Hybrid Model of Synchronous Machine R.W. Wamkeue1, B.B. Bensaker1,2; 1University of Quebec, CANADA, 2University of Annaba, ALGERIA Analysis of Synchronous Generator Internal Insulation Failures E.B. Bakie, B.K. Johnson, H.L. Hess, J.D. Law; University of Idaho, USA Weighted Control of Traction Drives with Parallel-connected AC Machines A. Bouscayrol1, M. Pietrzak-David2, P. Delarue1, R. Pena-Eguiluz2, P.E. Vidal2, X. Kestelyn2; 1L2EP, University of Lille, FRANCE, 2LEEI, INP Toulouse, FRANCE

Technical Session 1 - PM machines-I Session Chair: P. Cho, Naval Surface Warfare Center Session Co-chair: Z. Rahman, Wavecrest Labs La Duquesa, 1:30pm - 5:30pm 1P1 Analysis and Test of a High-Speed Axial Flux Permanent Magnet Synchronous Motor L. Zheng1, T.X. Wu1, K.B. Sundaram1, J. Vaidya2, L. Zhao1, D. Acharya1, C.H. Ham1, J. Kapat1, L. Chow1; 1 University of Central Florida, USA, 2Electrodynamic Associates, Inc., USA Synthesis of Cogging Torque Waveform from Analysis of a Single Stator Slot Z.Q. Zhu, S. Ruangsinchaiwanich, D. Howe; University of Sheffield, UK Complete Nonlinear Magnetic-Thermal-Stress Design of Radial Field Multipole NdFeB Permanent Magnet Cylinder M. Rosu1, S. Stanton1, J.R. Brauer2, Z.J. Cendes1; 1Ansoft Corporation, USA, 2Milwaukee School of Engineering, USA Direct Torque Control of a Multi-phase Permanent Magnet Synchronous Motor Drive: Application to a Fivephase One X. Kestelyn, E. Semail, D. Loriol; L2EP - ENSAM, FRANCE High-Torque Low-Torque-Ripple Fractional-Slot PM-Motors P. Salminen1, J. Pyrhnen1, M. Niemel1, J. Mantere2; 1Lappeenranta University of Technology, FINLAND, 2ABB Oy, FINLAND Determination of Parameters for Internal Permanent Magnet Synchronous Motors M.A. Jabbar1, J. Dong1, Z.H.J. Liu2; 1National University of Singapore, SINGAPORE, 3Data Storage Institute, SINGAPORE Concentric Winding BLDC Motor Design W.M. Wang, K.H. Nam, S.Y. Kim; POSTECH University, KOREA

1P2 1P3

1P4

1P5

1P6

1P7

Technical Session 2 - Special applications of machines and drives-I Session Chair: M. Rayner, Toshiba Session Co-chair: M. Rosu, Ansoft La Vista, 1:30pm - 5:30pm 2P1 Sensorless IFOC for Single-Phase Induction Motor Drive System M.B.R. Correa, C.B. Jacobina, P.M. dos Santos, E.C. dos Santos Jr., A.M.N. Lima; Universidade Federal de Campina Grande, BRAZIL Independent Vector Control of Asymmetrical Nine-phase Machines by Means of Series Connection M.J. Duran1, E. Levi2, M. Jones2; 1University of Seville, SPAIN, 2Liverpool John Moores University, UK Low Cost Vector Control for Permanent-Magnet-Synchronmotor with only One DC-Link Current Sensor for Pumping Application S. Soter, R. Wegener, J. Dopheide, B. Kiffer; University of Dortmund, GERMANY On Minimizing the Fluctuations in the Power Generated from a Wave Energy Plant 1 2 3 4 5 S. Muthukumar , S. Kakumanu , S. Sriram , R. Desai , A.A.S. Babar5 V. Jayashankar ; 1Anna University, INDIA, 4 2 Georgia Institute of Technology, USA, 3University of Texas at Austin, USA, Cognizant Technology Solutions India 5 Pvt. Ltd., INDIA, Indian Institute of Technology Madras, INDIA Effects of High Frequency Excitation on the Behavior of a Switched Reluctance Machine M. Krishnamurthy, D. Kaluvagunta, B. Fahimi; University of Texas at Arlington, USA Energy Storage Considerations for a Stand-alone Wave Energy Plant S. Muthukumar1, S. Kakumanu2, S. Sriram3, V. Jayashankar4; 1Anna University, INDIA, 2 Georgia Institute of Technology, USA, 3University of Texas at Austin, USA, 4 Indian Institute of Technology Madras, INDIA

2P2 2P3

2P4

2P5 2P6

Technical Session 3 - Automotive applications-I Session Chair: H. Xu, Whirpool Session Co-chair: O. Mohammed, Florida International University La Princesa, 1:30pm - 5:30pm 3P1 Real-Time Prediction of Torque Availability of an IPM Synchronous Machine Drive for Hybrid Electric Vehicles Z. Fu; Advanced Powertrain Systems, Visteon Corp., USA Comparison of Two Rotor Temperature Estimation Models of a Surface Cooled Squirrel Cage Induction Machine C. Kral, A. Haumer, H. Kapeller, F. Pirker, G. Pascoli; Arsenal Research, AUSTRIA Advancements in Tools and Methods for the Design of Permanent Magnet Integrated Starter Alternators F. Leonardi1, B. Ionescu2; 1Ford Motor Co., USA, 2Ansoft Corporation, USA Switched Reluctance Machine Converter Design for ISA Applications from Engine Cranking Perspectives M.N. Anwar, M. Teimor, S. Swales; Visteon Corporation, USA Advanced Optimization Design Techniques for Automotive Interior Permanent Magnet Synchronous Machines D. Iles-Klumpner1, M. Risticevic1, I. Boldea2; 1ebm-papst St. Georgen, GERMANY, 2University Politehnica of Timisoara, ROMANIA Hybrid Electric Vehicle DC-Bus Traction Drive Harmonics A. von Jouanne1, A. Wallace1, T. Lewis2, M. MillsPrice1, K. Rhinefrank1, W. Bowers1; 1Oregon State University, USA, 2United Defense, L.P., USA Hinfinity Control of Induction Motor with Efficiency Maximum for HEVs Z.L. Nie, W.M. Ma, W.C. Li; The Naval University of Engineering, CHINA

3P2

3P3 3P4 3P5

3P6

3P7

Technical Session 4 - Induction machines-I Session Chair: E. Levi, Liverpool John Moores University Session Co-chair: E. Wiedenbrug, Baker Instrument Co. La Reina,1:30pm - 5:30pm 4P1 4P2 4P3 Analysis of Multi-Phase Induction Machines with Winding Faults J.M. Apsley, S. Williamson; The University of Manchester, UK Detection of Stator Faults in Induction Machines using Residual Saturation Harmonics S. Nandi; University of Victoria, CANADA Calculation of Motor Capacitances for Prediction of Discharge Bearing Currents in Machines of InverterBased Drive System A. Muetze1, A. Binder2; 1University of Wisconsin - Madison, USA, 2Darmstadt University of Technology, GERMANY Fault Signature Modeling and Detection of Inner Race Bearing Defects J.R. Stack1, T.G. Habetler2, R.G. Harley2; 1Naval Surface Warfare Center, USA, 2Georgia Institute of Technology, USA Assessing the Impacts of Rewind and Repeated Rewinds on Induction Motors: Is an Opportunity for ReDesigning the Machine Being Wasted? W. Cao, K. Bradley; University of Nottingham, UK An on-line Technique for Monitoring the Insulation Condition of AC Machine Stator Windings S.B. Lee1, K. Younsi2, G.B. Kliman2; 1Korea University, KOREA, 2GE Global Research Center, USA Monitoring of the Transmission Properties of the Rotor Slip Ring System of Doubly-fed Induction Generators M. Wuerfel, W. Hofmann; University of Technology Chemnitz , GERMANY

4P4

4P5

4P6 4P7

Technical Session 5 - AC/DC Drives-I Session Chair: Z. Fu, Visteon Session Co-chair: T. Wolbank, Vienna University La Corona, 1:30pm - 5:30pm 5P1 Sliding Mode Observer for Wide Speed Range Sensorless Induction Machine Drives: Considerations for Digital Implementation J. Liu, J. Hu, L. Xu; The Ohio State University, USA A Novel Digital Control Technique for Brushless DC Motor Drives: Conduction-Angle Control F. Rodriguez, A. Emadi; Illinois Institute of Technology, USA A Novel Sensorless Control Strategy of Doubly-fed Induction Machines O.A. Mohammed, Z. Liu, S. Liu; Florida International University, USA A Novel H Controller for Wind Turbine Application Operating in Weak Grids M. Rathi, P. Jose, N. Mohan; University of Minnesota, USA A Novel Digital Control Technique for Brushless DC Motor Drives: Current Control P. Desai, A. Emadi; Illinois Institute of Technology, USA Sensorless Control of Induction Motor Drives Equipped with Inverter Output Filter J. Salomki, M. Hinkkanen, J. Luomi; Helsinki University of Technology, FINLAND Position Control of a Sensorless Interior Permanent Magnet Synchronous Motor System J.L. Shi, T.H. Liu, Y.C. Chang; National Taiwan University of Science and Technology, TAIWAN

5P2 5P3 5P4 5P5 5P6 5P7

Special Session 1 - Permanent magnet motor drives Session Chair: L. Parsa, Rensselaer Polytechnic Institute Salon del Rey North, 1:30pm - 5:30pm S1P1 On the Effect of Stator Excitation on Radial and Tangential Flux and Force Densities in a Permanent Magnet Synchronous Machine W. Zhu1, S. Pekarek2, B. Fahimi3; 1University of Missouri-Rolla, USA, 2Purdue University, USA, 3University of Texas at Arlington, USA S1P2 An Investigation of the Effect of Three-Dimensional Tooth Top Protrusions on Magnet Overhang in Radial Flux Motors Z. Rahman; WaveCrest Laboratories, LLC, USA S1P3 Analysis and Comparison of Methods for Determining d- and q-axes Inductances of IPM Machines R. Dutta, M.F. Rahman; The University of New South Wales, AUSTRALIA S1P4 A High Precision Motor Design Method by Finite Element Analysis Considering Stress Distribution in Stator Core A. Daikoku1, M. Nakano1, S. Yamaguchi1, Y. Tani1, Y. Toide1, T. Yoshioka1, H. Arita1, C. Fujino2; 1Mitsubishi Electric Corporation, JAPAN, 2Sun-yell Engineering Company Limited, JAPAN S1P5 Monitoring and Diagnosing of Variable Frequency Drives in the Field Environment Case Studies E. Wiedenbrug1, M. Sanford1, K. Deverell2; 1Baker Instrument Company, USA, 2RCM Technical Inc, CANADA S1P6 Vertical Electrical Motor using Soft Magnetic Composites G. Nord1, P. Jansson1, C.C. Petersen2, T. Yamada3; 1Hgans AB, SWEDEN, 2Quadrant Systems, Inc., USA, 3The Japan Research Institute, Limited, JAPAN S1P7 Axial Flux Motors Using Compacted Insulated Iron Powder and Laminations Design and Test Results A.G. Jack1, B.C. Mecrow1, G. Nord2, P.G. Dickinson3; 1University of Newcastle, UK, 2Hgans AB, SWEDEN, 3 Switched Reluctance Drives Ltd, UK

Poster Session 2 - Modeling and Control of Electric Machines/Drives Salon del Rey South, 3:30pm - 4:30pm Reluctance Network Model of Turbo-Generator and its Application in Rotor Winding Inter-Turn Short Circuit Fault S.T. Wan, A.M. Wang, Y. Wang, Y.G. Li; North China Electric Power University, CHINA An On-line Rotor Resistance Estimator for Induction Machine Drives C. Kwon, S. Sudhoff; Purdue University, USA New Concept of Multi-Phase Inductively-Driven Shaft-less Centrifugal Pumps P. Wu, C. Zhang, K.J. Tseng; Nanyang Technological University, SINGAPORE Double Fed Induction Machine Drive: Proposal of a Speed Sensorless Control Based on a MRAS. S. Carmeli, F. Castelli Dezza, R. Perini; Politecnico di Milano, ITALY A Novel High Frequency Induction Motor with Single-Phase Rotor Conductor and Position Sensor W.-S. Chen1, C.-L. Chen1, C.-S. Lin2,3; 1National Taiwan University, TAIWAN, 2National Taipei University of Technology, TAIWAN, 3Kuang-Wu Institute of Technology, TAIWAN Transient 3-D Thermal Analysis for an Air-Cooled Induction Motor H. Liu, V. Lelos, C. Hearn; The University of Texas at Austin, USA A New Soft-Start Method with Abnormal Over Current Protection Function for Switching Power Supplies Y.C. Ryu, Y.W. Hwang; Fairchild semiconductor, KOREA Analysis and Design of a Novel Direct Flux Control Scheme for Induction Machine J. Zhang, F. Rahman; The University of New South Wales, AUSTRALIA Design Comparison of Two Rotating Electrical Machines for 42V Electric Power Steering G. Aroquiadassou1, H. Henao1, V. Lanfranchi2, F. Betin1, B. Nahidmobarakeh1, G.A. Capolino1, J.M. Biedinger2, G. Friedriech2; 1University of Picardie - Jules Verne, FRANCE, 2University of Technology of Compiegne, FRANCE Three-Phase Model for the Circuit Simulation of Common-Mode Phenomena and Shaft Voltages in AC Motor Drive Systems P. Maki-Ontto, H. Kinnunen, J. Luomi; Helsinki University of Technology, FINLAND

Robust Control against Rotor Resistance Variation for Speed Sensorless Induction Motors Z.G. Lee1, S.K. Jeong1, S.S. You2, J.S. Yoon1; 1Pukyong National University, KOREA, 2Korea Maritime University, KOREA Auxiliary Voltage Sag Ride-Through System for Adjustable-Speed Drives H.J. Nanga Ndjana1,3, P. Sicard1, S. Lahaie2, . Ngandui1; 1Universit du Qubec Trois-Rivires, CANADA, 2 Laboratoire des technologies de l'nergie, IREQ, CANADA, 3Envitech Automation inc., CANADA A Review of Power Converter Topologies for Wind Generators J.A. Baroudi, V.R. Dinavahi, A.M. Knight; University of Alberta, CANADA Desensitization to Voltage Sags of a Rewinder by Using an Active Dancer Roll for Tension Control C. Thiffault1, P. Sicard1, A. Bouscayrol2; 1Universit du Qubec Trois-Rivires, CANADA, 2L2EP Lille - USTL, FRANCE Development of a First-Principles Design Method for Electromechanical Systems and a Linear Induction Machine T.C. O'Connell, P.T. Krein; University of Illinois at Urbana-Champaign, USA Evaluation of the Radiation Thermal Resistance in Industrial Motors A. Boglietti1, A. Cavagnino1, M. Parvis2, A. Vallan2; 1Politecnico di Torino. Elettrica Industriale, ITALY, 2Politecnico di Torino, Elettronica, ITALY Dsp-based Field Oriented Control of PMSM using SVPWM in Radar Servo System A.M. Wang, H.M. Li, P.W. Sun, Y.I. Wang; North China Electric Power University, CHINA

Tuesday May 17, 2005 Technical Session 6 - Switched Reluctance Machines Session Chair: U. Deshpande, DeWalt Industrial Tool Session Co-chair: S. Sudhoff, Purdue University La Corona, 8:00am - 12:00pm 6P1 6P2 A Fourier Series Generalized Geometry Based Analytical Model of Switched Reluctance Machines A. Khalil, I. Husain; The University of Akron, USA Simplified Unbalanced Force Calculation in Switched Reluctance Machines Using Electromagnetic Circuit Model N.H. Fuengwarodsakul1, B. Gu2, S. Schroeder1, R.W. De Doncker1, K. Nam2; 1RWTH Aachen University, GERMANY, 2POSTECH University, KOREA Measurement of Torque Ripple in Mass-Produced Switched-Reluctance Motor Drives A.C. Koenig, S.D. Pekarek; Purdue University, USA A Simplified Analytical Flux Model of Switched Reluctance Motor J. Zhang, A. Radun; University of Kentucky, USA Study of New Stator Pole Geometry for improvement of SRM Torque Profile N. Bhiwapurkar1, A. Jain2, N. Mohan1; 1University of Minnesota, USA, 2Analog Power Design Inc., USA Robust Torque- and Torque-per-Inertia Optimization of a Switched Reluctance Motor using the Taguchi methods A. Omekanda; Delphi Research Labs, USA

6P3 6P4 6P6 6P7

Technical Session 7 - AC/DC Drives-II Session Chair: K. Younsi, General Electric Session Co-chair: M. Pacas, University of Siegen La Duquesa, 8:00am - 12:00pm 7P1 7P2 Power Density Optimization in High Fidelity Power Drive Y. Khersonsky, C. Mak, G. Robinson; L-3 Communications Power Paragon Inc., USA New Optimal Current Control Methods for Energy-Efficient and Wide Speed-Range Operation of HybridField Synchronous Motor S. Shinnaka1, T. Sagawa2; 1Kanagawa University, JAPAN, 2Honda, JAPAN Comparison of Direct-Drive and Geared Generator Concepts for Wind Turbines H. Polinder1, F.F.A. van der Pijl1, G.J. de Vilder2, P. Tavner3; 1Delft University of Technology, NETHERLANDS, 2 Harakosan Europe BV, NETHERLANDS, 3University of Durham, UK Diminution of Current Measurement Error for Vector Controlled AC Motor Drives H.S. Jung, J.M. Kim, C.U. Kim, C. Choi; 1Pusan National University, KOREA, 2OTIS-LG, KOREA Predictive Current Control with Current Error Correction for PM Brushless AC Drives P. Wipasuramonton, Z.Q. Zhu, D. Howe; University of Sheffield, UK Predictive Torque Control of Induction Machines using Immediate Flux Control V. Ambrozic, D. Nedeljkovic, M. Nemec; Faculty of Electrical Engineering, SLOVENIA Stator Power Factor Adjustable Direct Torque Control of Doubly-Fed Induction Machines O.A. Mohammed, Z. Liu, S. Liu; Florida International University, USA

7P3

7P4 7P5 7P6 7P7

Technical Session 8 - Induction machines-II Session Chair: S. Colby, Schneider Electric Session Co-chair: A. Muetze, University of Wisconsin-Madison La Vista, 8:00am - 12:00pm 8P1 Improvements in Air Flow in the End Region of a Large Totally Enclosed Fan Cooled Induction Motor C. Micallef1,2, S.J. Pickering1, K. Simmons1, K. Bradley1; 1University of Nottingham, UK, 2University of Malta, MALTA Stray Load Loss Analysis of Cage Induction Motors Considering Inter-Bar Currents Using 3-D Finite Element Method K. Yamazaki, Y. Watanabe; Chiba Institute of Technology, JAPAN A Robust Rotor Temperature Estimator for Induction Machines in the Face of Changing Cooling Conditions and Unbalanced Supply Z. Gao, T.G. Habetler, R.G. Harley; Georgia Institute of Technology, USA A New Epstein Frame for Lamination Core Loss Measurements at High Frequencies and Flux Densities T.L. Mthombeni1, P. Pillay1, R. Strnat2; 1Clarkson University, USA, 2KJS Associates, Inc. Magnetics Engineering, USA Power Losses in Small Inverter-Fed Induction Motors A.M. Knight1, P.D. Malliband2, C.Y. Leong2, R.A. McMahon2; 1University of Alberta, CANADA, 2University of Cambridge, UK, An Online Rotor Time Constant Estimator for the Induction Machine K. Wang1, J. Chiasson1, M. Bodson2, L.M. Tolbert1,3; 1The University of Tennessee, USA, 2The University of Utah, USA, 3Oak Ridge National Laboratory, USA Induction Motor Stator and Rotor Winding Temperature Estimation Using Signal Injection Method Y. Wu, H. Gao; Montana State University, USA

8P2

8P3

8P4

8P5

8P6

8P7

Technical Session 9 - PM machines-II Session Chair: L. Hao, Wavecrest Labs Session Co-chair: Y. Perriard, Ecole Polytechnique Federale de Lausanne La Reina, 8:00am - 12:00pm 9P1 9P2 Study of High Frequency Model of Permanent Magnet Motor O.A. Mohammed, S. Ganu, S. Liu, Z. Liu, N. Abed; Florida International University, USA Curvilinear Finite Elements for Modeling the Sliding Surface in Rotating Electrical Machines and its Applications W.N. Fu1, Z. Zhang2, P. Zhou1, D. Lin1, S. Stanton1, Z.J. Cendes1; 1Ansoft Corporation, USA, 2Whirlpool Corporation, USA Design Aspects of a High Speed Permanent Magnet Synchronous Motor / Generator for Flywheel Applications A.S. Nagorny1, N.V. Dravid2, R.H. Jansen3, B.H. Kenny2; 1National Research Council, USA, 2NASA Glenn Research Center, USA, 3University of Toledo, USA Optimal Shape Design of Interior Permanent-Magnet Synchronous Motor A. Kiyoumarsi , M. Moallem; Isfahan University of Technology, IRAN Optimisation of a Brushless Motor Excited by Multi-Polar Permanent Magnet Array P.H. Mellor, R. Wrobel; University of Bristol, UK Design Considerations for a Direct Drive Brushless PM Machine with Concentrated Windings R. Wrobel, P.H. Mellor; University of Bristol , UK A Low-Cost and Efficient Permanent Magnet Assisted Synchronous Reluctance Motor Drive P. Niazi1, H. Toliyat1, D. Cheong2, J. Kim2; 1Texas A&M University, USA, 2LG Electronics, KOREA

9P3

9P4 9P5 9P6 9P7

Technical Session 10 - PM motor drives Session Chair: L. Petersen, Office of Naval Research Session Co-chair: M. Ferdowsi, University of Missouri-Rolla Central, 8:00am - 12:00pm 10P1 Minimum Torque Ripple Control of Permanent Magnet Synchronous Motor in the Stationary Reference Frame J. Zeng, P. Degobert, J.-P. Hautier; L2EP, ENSAM, FRANCE 10P2 Adaptive Observer Combined with HF Signal Injection for Sensorless Control of PMSM Drives A. Piippo, J. Luomi; Helsinki University of Technology, FINLAND 10P3 High Reliable Near-Zero Speed Control for Sinusoidal PMSM Drives with Low Resolution Position Sensors F. Carella, A. Lidozzi, L. Solero, A. Di Napoli, F. Crescimbini; University of Roma Tre - DIMI, ITALY 10P4 A Fractional Slot Axial Flux PM Direct Drive P. Cancelliere1, V. Delli Colli1, F. Marignetti1, M. Scarano1, I. Boldea2, M. Topor2; 1DAEIMI - University of Cassino , ITALY, 2Technical University of Timisoara , ROMANIA 10P5 A Nonlinear Model for Synchronous Machines to Describe High-Frequency Signal Based Position Estimators F.M.L.L. De Belie, J.A.A. Melkebeek, L. Vandevelde, R.K. Boel, K.R. Geldhof, T.J. Vyncke; Ghent University, EESA, BELGIUM 10P6 An Adaptive Sliding Stator Flux Observer for a Direct Torque Controlled IPM Motor Drive Z. Xu, F. Rahman; The University of New South Wales, AUSTRALIA 10P7 Synergetic Control of PMSM Drives for High Dynamic Applications T. Bogani, A. Lidozzi, L. Solero, A. Di Napoli; University of Roma Tre, ITALY

Special Session 2 - Fault tolerance, diagnostics and survivability of adjustable speed motor drives Session Chair: M. Abolhasani, Wavecrest Labs Salon del Rey North, 8:00am - 12:00pm S2P1 Induction Drives Diagnosis by Signal Injection: Effectiveness and Severity Classification A. Bellini1, C. Concari2, G. Franceschini2, E. Lorenzani2, C. Tassoni2; 1University of Modena and Reggio Emilia, ITALY, 2University of Parma, ITALY S2P2 A Novel Multiphase Fault Tolerant High Torque Density Permanent Magnet Motor Drive for Traction Application M.T. Abolhassani; Wavecrest Labs, USA S2P3 Resistance Estimation for Temperature Determination in PMSMs through Signal Injection S.D. Wilson, G.W. Jewell, P.J. Stewart; The University of Sheffield, UK S2P4 Broken Rotor Bars Fault Detection in Squirrel Cage Induction Machines A. Yazidi, H. Henao, G.A. Capolino; University of Picardie - Jules Verne, FRANCE S2P5 Fuzzy Detection and Diagnosis of Fault Modes in a Voltage-Fed PWM Inverter Induction Motor F. Zidani1, D. Diallo2, M.E.H. Benbouzid3, R. Nat-Sad1; 1LSPIE, University of Batna, ALGERIA, 2LGEP, University of Paris XI, FRANCE, 3LIME, University of Western Brittany, FRANCE S2P6 An Online Adaptive Stator Winding Temperature Estimator Based on a Hybrid Thermal Model for Induction Machines Z. Gao, T.G. Habetler, R.G. Harley; Georgia Institute of Technology, USA S2P7 On Innovative Methods of Induction Motor Inter-Turn and Broken-Bar Fault Diagnostics B. Mirafzal, N.A.O. Demerdash; Marquette University, USA S2P8 Operating Induction Motor Drives with Turn-to-Turn Faults C. Gerada, K. Bradley, M. Sumner, P. Wheeler; University of Nottingham, UK

Poster Session 3 - Drive System Topologies and Control Salon del Rey South, 9:00am - 10:00am Parallel Operation System of High Frequency modularized UPS Based on Distributed Logic Control X. Chen1, L. Li2, H. Shan1, Y. Kang1, J. Chen1; 1Huazhong University of Science and Technology, CHINA, 2 Zhengzhou University Of Light Industry, CHINA An Adaptive Maximum Torque Per Amp Control Strategy C. Kwon, S. Suhdoff; Purdue University, USA Component Minimized AC-AC Single-Phase to Three-Phase-Four-Wire Converters C.B. Jacobina, E.C. Santos Jr., M.B.R. Correa, A.M.N. Lima; DEE-UFCG, BRAZIL The Restrain of the Dead Time Effects in Parallel Inverters Y. Zhang, X. Chen, Y. Kang, J. Chen; Huazhong University of Science and Technology, CHINA Adaptive Field-Oriented Control of Induction Motor for HEVs Z.L. Nie, W.M. Ma, W.C. Li; The Naval University of Engineering, CHINA Multi Drives Modulation Synchronization via Field-Bus C. Attaianese, V. Nardi, G. Tomasso, D. Capraro; University of Cassino, ITALY A Comparative Study of Kalman Filtering for Sensorless Control of a Permanent-Magnet Synchronous Motor Drive P. Borsje, T.F. Chan, Y.K. Wong, S.L. Ho; The Hong Kong Polytechnic University, CHINA Linear Switched Reluctance Motor. A New Topology for Fault Tolerant Traction Applications D.S.B. Fonseca, C.P. Cabrita, M.R.A. Calado; University of Beira Interior, PORTUGAL A Simple Neutral-point Voltage Balancing Control Method for Three-level NPC PWM VSI Inverters L. Lin, Y.P. Zou, Z. Wang, H.Y. Jin; Huazhong University of Science and Technology, CHINA Development of Sensorless Vector Control for a PMSM Running up to 60,000 rpm S. Chi, L. Xu; The Ohio State University, USA Genetic Algorithm Optimized Fuzzy Repetitive Controller for Low Cost UPS Inverter Applications B.Y. Liu, S.X. Duan, Y. Kang, J. Chen; Huazhong University of Science and Technology, CHINA

A High-Performance Five-Level Single-Phase Inverter Using Repetitive Control and State Feedback C.Z. Wang, Y.P. Zou, H.Y. Jin, K. Ding, Y. Zhang, X.L. Xu; Huazhong University of Science and Technology, CHINA Three-Phase to Three-Phase-Four-Wire Five-Leg Converters C.B. Jacobina, I.S. Freitas, E.R.C. Silva, A.M.N. Lima; DEE-UFCG, BRAZIL Design and Test of a Ironless, Three Degree-of-freedom, Magnetically Levitated Linear Actuator with Moving Magnets J.W. Jansen, J.M. van Essen, C.M.M. van Lierop, E.A. Lomonova, A.J.A. Vandenput; Eindhoven University of Technology, NETHERLANDS Thermal Analysis of Linear Variable Reluctance Motor for Manufacturing Automation Applications N. Chayopitak, D.G. Taylor; Georgia Institute of Technology, USA

Technical Session 11 - Synchronous Machines Session Chair: S. Salem, General Electric Session Co-chair: P. Wendling, Magsoft La Corona, 1:30pm - 5:30pm 11P1 Design of a Super-High Speed Permanent Magnet Synchronous Motor for Cryogenic Applications L. Zheng1, T.X. Wu1, D. Acharya1, K.B. Sundaram1, J. Vaidya2, L. Zhao1, L. Zhou1, K. Murty1, C.H. Ham1, N. Arakere3, J. Kapat1, L. Chow1; 1University of Central Florida, USA, 2Electrodynamic Associates, Inc., USA, 3 Department of MAE, University of Florida, USA 11P2 New Dynamic Mathematical Model and New Dynamic Vector Simulators of Hybrid-Field Synchronous Motor S. Shinnaka; Kanagawa University, JAPAN 11P3 A Study of Synchronous Machine Modeling about Synchronizing Phenomena D. Hiramatsu1, K. Koyanagi 3, K. Hirayama1, Y. Uemura1, M. Kakiuchi1, T. Satoh4, K. Nagasaka5, S. Nagano1; 1 Toshiba Corporation, JAPAN, 2Tepco Systema Corporation, JAPAN, 3Kitashiba Electric Corporation, JAPAN, 4 Tokyo University of Agriculture and Technology, JAPAN 11P4 Multi-Physics Simulation of a Synchronous Claw-Pole Alternator for Automotive Applications S. Schulte, K. Hameyer; RWTH Aachen University, GERMANY 11P5 Design Considerations on Fractional-Slot Fault-Tolerant Synchronous Motors N. Bianchi, M. Dai Pre', G. Grezzani, S. Bolognani; University Padova, ITALY 11P6 Air-cooled Large Turbine Generator with Multiple-pitched Ventilation Ducts M. Fujita, Y. Kabata, T. Tokumasu, M. Kakiuchi, H. Shiomi, S. Nagano; Toshiba Corporation, JAPAN 11P7 Optimal Excitation of Permanent Magnet Synchronous Machines via Direct Computation of Electromagnetic Force Components W. Zhu1, B. Fahimi2, S. Pekarek3; 1University of Missouri-Rolla, USA, 2University of Texas at Arlington, USA, 3 Purdue University, USA

Technical Session 12 - AC/DC Drives-III Session Chair: T. Lewis, United Defense L.P. Session Co-chair: E. Lin, Baldor Electric La Duquesa, 1:30pm - 5:30pm 12P1 Modeling, Simulation and Analysis of a Homopolar Generator with Input Limiter I.S. Kim1, D.K. Choi1, S.H. Choi2, S.J. Seong3; 1Agency for Defense Development, KOREA, 2Kyongju Aerospace Electrical Systems Co., Ltd, KOREA, 3Chungnam National University, KOREA 12P2 A New Concentrated Windings Surface Mounted Permanent Magnet Synchronous Machine for Wind Energy Application M.T. Abolhassani; Wavecrest Labs, USA 12P3 Analytical Force Determination in an Electromagnetic Actuator M. Markovic, M. Jufer, Y. Perriard; Ecole Polytechnique Federale de Lausanne, SWITZERLAND 12P4 IGBT and PN Junction Diode Loss Modeling for System Simulations B. Cassimere1, S. Sudhoff1, B. Cassimere1, D. Aliprantis2, M. Swinney3; 1Purdue University, USA, 2Greek Army, GREECE, 3Reliance Electric, USA 12P5 Saturation Modulation in Voltage Zero Sequence-Based Encoderless Techniques - Part I: Harmonic Analysis A. Consoli1, G. Scarcella1, A. Testa2, G. Bottiglieri1; 1DIEES - University of Catania, ITALY, 2DFMTFA - University of Messina, ITALY 12P6 Field Oriented Control of a Synchronous Drive D. Beliaev1, A. Weinger1, R. Paes2, S. Weigel2; 1Rockwell Automation, RUSSIAN FEDERATION, 2Rockwell Automation, CANADA 12P7 A New Technique for Pulse-Width-Modulation using Direct Torque Control of a Virtual Motor J. Faiz, A.H. Pouramini; University of Tehran, IRAN

Technical Session 13 - Induction machines-III Session Chair: A. Mohammed, Texas Instruments Session Co-chair: O. Ojo, Tennessee Tech La Vista, 1:30pm - 5:30pm 13P1 Failure Detection in Converter Fed Induction Machines under Different Operation Conditions L. Mihet Popa1, J.M. Pacas2; 1Politehnica University of Timisoara, ROMANIA, 2Siegen University, GERMANY 13P2 The Effect of Inter-bar Currents in a PSC Motor S. Williamson, C.Y. Poh; The University of Manchester, UK 13P3 Finite Element Analysis for Field Currents and Reactances of Doubly Fed Induction Generators for Wind Turbines K. Shima1, K. Ide1, K. Nishihama1, T. Fujigaki2, S. Mizutani2, M. Iizuka2; 1Hitachi Research Laboratory, Hitachi, Ltd., JAPAN, 2Hitachi Works, Hitachi Ltd., JAPAN 13P4 Performance of Motors with Die-cast Copper Rotors in Industrial and Agricultural Pumping Applications D.T. Peters1, J.G. Cowie1, E.F. Brush2, R. Kimmich3, M. Doppelbauer3; 1Copper Develpment Association Inc., USA, 2 BBF Associates, USA, 3SEW Eurodrive GmbH, GERMANY 13P5 Advanced Induction Motor Endring Design Features for High Speed Applications M.T. Caprio, V. Lelos, J.D. Herbst, J. Upshaw; The University of Texas at Austin, USA 13P6 Dynamic Simulation of Induction Machines Taken into Account Winding Distribution, Slotting and Saturation Effects A. Rentschler , A. Binder; Darmstadt University of Technology , GERMANY 13P7 Two Techniques for Modeling an Induction Motor with Skewed Slots with a Time-Stepping 2D-3D Finite Element Method P. Wendling1, Y. Le Floch2, P. Lombard2, A. Akabar3, L. Sadi-Haddad4; 1Magost Coporation, USA, 2Cedrat SA, FRANCE, 3EDF, FRANCE, 4L.M.B.E-Amiens, FRANCE

Technical Session 14 - PM machines-III Session Chair: K. Klontz, Fisher Electric Technology Session Co-chair: Tian-Hua Liu Salon del Rey North, 1:30pm - 5:30pm 14P1 Genetic Algorithm Based Design of a Permanent Magnet Synchronous Machine S.D. Sudhoff1, J. Cale1, B. Cassimere1, M. Swinney2; 1Purdue University, USA, 2Rockwell Automation/Reliance Electric, USA 14P2 Torque Ripple Tester for a Permanent Magnet Synchronous Motor S.H. Hossain1, S.G. Gebhart1, U.D. Deshpande1, D. Smith2; 1Globe Motors, USA, 2Black and Decker, USA 14P3 Optimization of the Constant Power Speed Range of a Saturated Permanent Magnet Synchronous Motor L. Jolly, M.A. Jabbar, Q. Liu; National University of Singapore, SINGAPORE 14P4 On-Line Parameter Estimation of Permanent Magnet Assisted Synchronous Reluctance Motor Drives P. Niazi, H. Toliyat; Texas A&M University, USA 14P5 Fast and Smooth Initial Position and Magnet Polarity Estimation of Salient and Near Zero Saliency PM Synchronous Machines M.C. Harke, D. Raca, R.D. Lorenz; University of Wisconsin - Madison, USA 14P6 A Speed Control of an Interior Permanent Magnet Motor Drive Ensuring Minimum Electrical Loss O. Ojo, Z. Wu; Tennessee Tech. University, USA 14P7 Performance Control of PMSM Drives Using a Self-tuning PID X. Xiao, Y.D. Li, M. Li; Tsinghua University, CHINA

Technical Session 15 - Industrial drives-I Session Chair: D. Rendusara, Schlumberger Session Co-chair: Y. Khersonsky, L3 Communications Central, 1:30pm - 5:30pm 15P1 A New Direct Torque Control Strategy for the Minimization of Common-mode emissions M. Cirrincione1, M. Pucci1, G. Vitale1, G. Cirrincione2; 1ISSIA-CNR, ITALY, 2University of Picardie - Jules Verne, ITALY 15P2 Calculation of the Influence of Insulated Bearings and Insulated Inner Bearing Seats on Circulating Bearing Currents in Machines of Inverter-Based Drive Systems A. Muetze1, A. Binder2; 1University of Wisconsin - Madison, USA, 2Darmstadt University of Technology, GERMANY 15P3 A New Strategy for Differential Overvoltages and Common-Mode Currents Determination in PWM Induction Motor Drives H. de Paula1, M.L.R. Chaves1, D.A. Andrade1, J.L. Domingos2, M.A.A. de Freitas3; 1Universidade Federal de Uberlndia, BRAZIL, 2CEFET - GO, BRAZIL, 3UEMG, BRAZIL, 15P4 Accurate Adaptive Integration Algorithms for Induction Machine Drive over a Wide Speed Range M. Zerbo, P. Sicard, A. Ba-Razzouk; Universit du Qubec Trois-Rivires, CANADA 15P5 Open-Loop Speed Estimator Design for Online Induction Machine Synchronous Speed tracking M. Zerbo, A. Ba-Razzouk, P. Sicard; Universit du Qubec Trois-Rivires, CANADA 15P6 Speed Sensor-less Control of Induction Machine Based on Carrier Signal Injection and Smooth-air-gap Induction Machine Model G. Wang1, H. Hofmann1, A. El-Antably2; 1The Pennsylvania State University, USA, 2General Motors Corporation, USA 15P7 Squirrel-Cage Induction Machine Broken Bars Fault Detection in Adjustable Speed Drives C.C.M. Cunha1, B.J. Cardoso Filho2; 1Universidade Federal do Esprito Santo, BRAZIL, 2Universidade Federal de Minas Gerais, BRAZIL 15P8 Dual Estimators for Position and Current Sensorless SRM Drives Based on the Decomposed Model F.R. Salmasi; University of Tehran, IRAN

Special Session 3 - Micromachines Session Chair: A. Emadi, Illinois Institute of Technology La Reina, 1:30pm - 5:30pm S3P1 Micromachines: Principles of Operation, Dynamics, and Control S. Irudayaraj, A. Emadi; Illinois Institute of Technology, USA S3P2 Operational Characteristics of Variable Capacitance Micromotor Drives: A Preliminary Investigation M. Krishnamurthy, A. Jindal, B. Fahimi; University of Texas at Arlington, USA S3P3 Efficiency Issues in Variable-Capacitance Micromotor Drives P.L. Chapman; University of Illinois at Urbana-Champaign, USA S3P4 Optimal Design of a Micro Axial Flux Switched-Reluctance Motor C.-T. Liu1, Y.-M. Chen1, D.-C. Pang2; 1National Sun Yat-sen University, TAIWAN, 2National Kaohsiung University of Applied Sciences, TAIWAN S3P5 A Hybrid High speed Electrical Micromachine for Micro Scale Power Generation S.S. Stevens, J.D. Driesen, R.B. Belmans; Katholieke Universiteit Leuven, BELGIUM S3P6 Integrated Solution for Micro Power Generation S. Stevens1, R. D'hulst1, T. Stevens1, T. Waumans1, R. Van den Braembussche2, J. Driesen1, J. Peirs1, R. Belmans1, F. Verplaetsen1, M. Baelmans1, D. Reynaerts1; 1Katholieke Universiteit Leuven, BELGIUM, 2von Karman Institute for Fluid Dynamics, BELGIUM

Poster Session 4 - Specialty Machines/Drives Salon del Rey South, 3:30pm - 4:30pm The Modeling and Simulation of a Permanent Magnet Synchronous Motor with Direct Torque Control Based on MATLAB/SIMULINK Z. Lu1, H. Sheng2, H. Hess1, K. Buck1; 1University of Idaho, USA, 2Virginia Institute of Technology and State University, USA FEM Analyses for the Design and Modeling of a Novel Flywheel Energy Storage System Assisted by Integrated Magnetic Bearing C. Zhang, P. Wu, K.J. Tseng; Nanyang Technological University, SINGAPORE Design and Operation Aspects of Field Regulated PM Synchronous Machines with Concentrated Armature Windings A. Di Gerlando, G. Foglia, R. Perini, M. Ubaldini; Politecnico di Milano, ITALY Modelling and Test Validation of High Speed Universal Motors Fed via a Triac A. Di Gerlando, R. Perini; Politecnico di Milano, ITALY Analytical and Numerical Study of a New Kind of PM Brushless Motor with Trapezoidal EMF for Low Cost and Low Inertia Applications J.F. Charpentier; French Naval Academy, FRANCE Axial Flux Permanent Magnet Generator with Concentrated Winding for Small Wind Power Applications A. Parviainen1, J. Pyrhnen1, P. Kontkanen2; 1Lappeenranta University of Technology, FINLAND, 2KylmaTec Ky, FINLAND A New Transverse Flux Permanent Motor for Direct Drive Application G.Q. Bao, J.Z. Jiang; Shanghai University, CHINA Back EMF Calculations for Axial-Gap Permanent Magnet Synchronous Motors (AGPMSM) with Disc Magnets J M. Bailey1, B. Ozpineci1, G.W. Ott1, D.S. Daniels2; 1Oak Ridge National Laboratory, USA, 2The University of North Florida, USA

Torque Analysis of Combined 2D FEM and Lumped Parameter Method for a Hybrid Stepping Motor S. Kang, D. Lieu; UC Berkeley, USA Electromagnetic Analysis of High Speed Machines with Diametrically Magnetized Rotor, Considering Slotting Effect and Applied to New Magnetization Modeling S.M. Jang1, J.Y. Choi1, D.J. You1, H.S. Yang2; 1Chungnam Nat'l Univ., KOREA, 2Samsung Techwin Co. Ltd., KOREA Homopolar and Bipolar Hybrid Excitation Synchronous Machines L. Vido1, M. Gabsi2, M. Lcrivain2, Y. Amara3, F. Chabot4; 1SATIE, IUPGE Cergy, FRANCE, 2SATIE, ENS Cachan, FRANCE, 3L2ES, Technical University of Belfort-Montbliard , FRANCE, 4PSA, PEUGEOT CITRON, FRANCE Cogging Torque Prediction by Superposition of Torque due to Pole Transition over Slot Z.J. Liu1, J.T. Li1,2, M.A. Jabbar2; 1Data Storage Institute, SINGAPORE, 2National University of Singapore, SINGAPORE Dynamic Characteristic Analysis and Control Parameter Estimation of Tubular Type Moving-Magnet Linear Actuator with Halbach Array S.M. Jang1, J.Y. Choi1, H.W. Cho1, S.H. Lee2; 1Chungnam Nat'l Univ., KOREA, 2LG Digital Appliance Lab. , KOREA A Novel Linear Actuator using a Low Cost Stepper Motor with Integrated Stall Detection D. Frachon, A. Foucaut, E. Rondot, J. Alzingre; Moving Magnet Technologies, FRANCE A Study of the Optimum Stator Winding Arrangement of LIM in Maglev Systems T. Mishima, S. Hiraoka, T. Nomura; Kure College of Technology, JAPAN Cogging Force and its Estimation using a Neural Network Based on 2D Field Model of PMLSM B. Shao, Z.-T. Cao, H.-P. Chen, G.-G. He; Institution Of Applied Physics, CHINA An Analytical Solution for the Normal Force in Linear Actuators A.F. Flores Filho, M.A. da Silveira, R.P. Homrich; Laboratory of Electrical Machines, Drives and Energy, BRAZIL Analytical Modeling of an Axial Flux Permanent Magnet Synchronous Generator for Wind Energy Application J. Azzouzi, G. Barakat, B. Dakyo; GREAH, FRANCE

Cogging Torque Reduction in an Axial Flux PM Machine with Extended Speed Range A. Letelier, J.A. Tapia, R. Wallace, M.A. Valenzuela; University of Concepcion, CHILE

Wednesday May 18, 2005 Technical Session 16 - Switched Reluctance and Synchronous Machines Session Chair: C. Hyunh, Calnetix Session Co-chair: A. Radun, University of Kentucky La Corona, 8:00am - 12:00pm 16P1 Influence of Higher Harmonics in the End Region Magnetic Field on Eddy Currents in the Stator Clamping System of Hydro Generators E. Schmidt1, G. Traxler-Samek2, A. Schwery2; 1Vienna University of Technology, AUSTRIA, 2Hydro Generator Technology Center, ALSTOM (Switzerland) Ltd., SWITZERLAND 16P2 Acoustic Noise in Switched Reluctance Drives: An Aerodynamic Problem? J.O. Fiedler, K.A. Kasper, R.W. DeDoncker; ISEA RWTH Aachen University, GERMANY 16P3 A New Low-noise Two-phase Switched Reluctance Motor W.A. Pengov, J.R. Hendershot, T.J.E. Miller; 1SR Traction, USA, 2Fisher, USA, 3SPEED Lab, UK 16P4 Impact of Continuous Conduction on the Constant Power Speed Range of the Switched Reluctance Motor J.S. Lawler, J.M. Bailey, J.W. McKeever, P.J. Otaduy; 1University of Tennessee, USA, 2Oak Ridge National Laboratory, USA 16P5 Performance Characteristics of a Transverse Flux Generator J.F. Gieras; United Technologies Research Center, USA 16P6 Computation of the Mutual Inductance between Rotor and Stator of Synchronous Claw-Pole Alternators regarding Claw Chamfers S. Schulte, K. Hameyer; RWTH Aachen University, GERMANY 16P7 Rapid Analytical Optimization of Eddy Current Shield Thickness for Associated Loss Minimization in Electrical Machines M.R. Shah1, S.B. Lee2; 1GE Global Research Center, USA, 2Korea University, KOREA

Technical Session 17 - AC/DC Drives-IV Session Chair: S. Hossain, Globe Motors Session Co-chair: H. Hess, University of Idaho La Reina, 8:00am - 12:00pm 17P1 Combined Inverter Design and Motor Selection to Meet 42V Automotive System Targets A. Kwasinski, P. Krein; University of Illinois at Urbana-Champaign, USA 17P2 Distributed Control of Hybrid Motor Drives S. Lu, K.A. Corzine, T.H. Fikse; 1University of Missouri-Rolla, USA, 2Naval Surface Warfare Center, USA 17P3 A Current Source Inverter with Advanced External Circuit and Control Method S. Kwak, H. Toliyat; Texas A&M University, USA 17P4 VSI Parallel Operation for Active Filtering in High Power Drives C. Attaianese, V. Nardi, G. Tomasso; University of Cassino, ITALY 17P5 WTHD-Optimal Staircase Modulation of Single-Phase Multilevel Inverters B. Diong, K. Corzine; 1Texas Christian University, USA, 2University of Missouri-Rolla, USA 17P6 Five-Leg Converter Dual-Winding AC Drive Systems C.B. Jacobina1, R.S. Miranda2, M.B.R. Correa1, A.M.N. Lima1, N. Rocha1; 1DEE-UFCG, BRAZIL, 2CEFET-MA, BRAZIL 17P7 A Novel Discrete Control Technique of Matrix Converter for the Vector Control of Permanent Magnet Synchronous Motor H.J. Ge, X.H. Mu, S.H. Zhang, B. Zhou; Nanjing University of Aeronautics and Astronautics, CHINA

Technical Session 18 - Induction machines-IV Session Chair: B. Kenny, NASA Session Co-chair: M. Zolghadri, NC A&T State University La Duquesa, 8:00am - 12:00pm 18P1 A Genetic Algorithm Based Induction Machine Characterization Procedure C. Kwon, S. Sudhoff; Purdue University, USA 18P2 A Survey of Efficiency Estimation Methods of In-Service Induction Motors with Considerations of Condition Monitoring Requirements B. Lu, T. Habetler, R. Harley; Georgia Institute of Technology, USA 18P3 AC Drive Systems Using Four-Leg Converter with Maximum DC-Bus Voltage Utilization C.B. Jacobina, E.C. Santos Junior, M.B.R. Correa, E.R.C. Silva, A.M.N. Lima; DEE-UFCG, BRAZIL 18P4 Sensorless Control of Induction Machines by Combining Fundamental Wave Models with Transient Excitation Technique T.M. Wolbank, R. Woehrnschimmel, H. Giuliani, J.L. Machl; Vienna University of Technology, AUSTRIA 18P5 Variable Frequency Control of an Induction Motor Drive with Reduced Switching Devices O. Ojo, Z. Wu, G. Dong, S. Asuri; Tennessee Tech. University, USA 18P6 Sensorless Speed, Position and Torque Control using AC Machine Saliencies C. Spiteri Staines1, C. Caruana1, N. Teske2, J. Cilia1, G.M. Asher3; 1University of Malta, MALTA, 2Siemens, GERMANY, 3University of Nottingham, UK 18P7 Evaluation of a Re-Rated Induction Machine M. Amrhein, P.T. Krein, B.I. Fierro; University of Illinois at Urbana-Champaign, USA

Technical Session 19 - Industrial drives-II Session Chair: J. Shoemaker, United Defense L.P. Session Co-chair: K. Younsi, General Electric La Vista, 8:00am - 12:00pm 19P1 Impact of Inductor Placement on the Performance of Adjustable Speed Drives Under Input Voltage Unbalance and Sag Conditions K.L. Lee1, T.M. Jahns2, D.W. Novotny2, T.A. Lipo2, W.E. Berkopec1, V. Blasko3; 1Eaton, USA, 2University of Wisconsin - Madison, USA, 3Otis Elevator Co., USA 19P2 Advanced Control of Cascaded Multilevel Drives Based on P-Q Theory S. Lu1, K.A. Corzine1, T.H. Fikse2; 1University of Missouri-Rolla, USA, 2Naval Surface Warfare Center, USA 19P3 Design Considerations for Neutral Point Clamped Converters A. Bendre, R. Cuzner, S. Krstic; DRS Power & Control Technologies, Inc. , USA 19P4 Comparison of Lamination Iron Losses Supplied by PWM Voltages: US and European Experiences A. Boglietti1, A. Cavagnino1, L. Mthombeni2, P. Pillay2; 1Politecnico di Torino - Dip. Ing. Elettrica Ind., ITALY, 2 Clarkson University, USA 19P5 A General Space Vector PWM Algorithm for Multilevel Inverters, Including Operation in Overmodulation Range A.K. Gupta, A.M. Khambadkone; National University of Singapore, SINGAPORE 19P6 Three-Level Inverter Scheme with Common Mode Voltage Elimination and DC-Link Capacitor Voltage Balancing for an Open End Winding Induction Motor Drive R.S. Kanchan, P.N. Tekwani, K. Gopakumar; CEDT, Indian Institute of Science, INDIA 19P7 A Time-Domain Rotating Machine Model for Switching Overvoltage Studies using Network Synthesis for the Winding Impedance V. Venegas1, E. Melgoza1, J.L. Guardado1, R. Mota2, R. Escarela3; 1Instituto Tecnologico de Morelia, MEXICO, 2 Instituto Politecnico Nacional, MEXICO, 3Universidad Autonoma Metropolitana, MEXICO

Technical Session 20 - PM machines-IV Session Chair: S. Waiker, DeWalt Industrial Tool Co. Session Co-chair: M. Mueller, University of Edinburgh La Princesa, 8:00am - 12:00pm 20P1 Round the World Flight with Solar Aircraft: Complex System Optimization Process Y. Perriard, P. Ragot, M. Markovic; Ecole Polytechnique Fdrale de Lausanne, SWITZERLAND 20P2 EKF-based Hybrid Controller for Permanent Magnet Brushless Motors Combining Hall Sensors and a FluxObserver-based Sensorless Technique Y.F. Shi, Z.Q. Zhu, D. Howe; University of Sheffield, UK 20P3 A Tubular Generator for Marine Energy Direct Drive Applications P. Cancelliere, F. Marignetti, V. Delli Colli, R. Di Stefano, M. Scarano; DAEIMI - University of Cassino , ITALY 20P4 Paralleling of Stator Coils in Permanent Magnet Machines M. Islam, S. Mir, T. Sebastian; Delphi Steering Systems, USA 20P5 Optimization of Electric Motor for a Solar Airplane Application P. Ragot, M. Markovic, Y. Perriard; Ecole Polytechnique Federale de Lausanne, SWITZERLAND 20P6 Ultrahigh Speed Permanent Magnet Motor/Generator for Aerospace Flywheel Energy Storage Applications W. Wang, H. Hofmann, C.E. Bakis; The Pennsylvania State University, USA 20P7 Design of a PM Wind Generator, Optimised for Energy Capture over a Wide Operating Range M.A. Khan1, P. Pillay2; 1University of Cape Town, SOUTH AFRICA, 2Clarkson University, USA

Special Session 4 - Automotive applications of electric drives and controls Session Chair: J. Miller, J-N-J Designs, P.L.C. Salon del Rey North, 8:00am - 12:00pm S4P1 Field Weakening Operation of High Torque Density Five-Phase Permanent Magnet Motor Drives L. Parsa1, N. Kim2, H. Toliyat2; 1Rensselaer Polytechnic Institute, USA, 2Texas A&M University, USA S4P2 Comparative Assessment of Ultra-capacitors and Advanced Battery Energy Storage Systems in PowerSplit Electronic-CVT Vehicle PowerTrains. J.M. Miller1, P.J. McCleer2, M. Everett3; 1J-N-J Miller Designs, P.L.C., USA, 2Maxwell Technologies, Inc., USA, 3 McCleer Power, Inc., USA S4P3 A Linear Permanent Magnet Generator for a Free-Piston Energy Converter J. Wang, D. Howe; University of Sheffield, UK S4P4 Integrated Starter Generator: Need of an Optimal Design and Control Approach. Application to a Permanent Magnet Machine G. Friedrich1, L. Chedot1,2, J.M. Biedinger1, P. Macret1; 1Compiegne Electric Drive Laboratory, FRANCE, 2VALEO systmes lectriques 2, rue A. Boulle, FRANCE S4P5 Modeling of a Switched Reluctance Drive System for a 'Convoy Vehicle' J.D. Ferreira Rodriguez1, A.C. Renfrew2; 1Universidad de Los Andes, VENEZUELA, 2University of Manchester, UK S4P6 Multi-motor Synchronization Technique applied in Traction Devices F.J. Perez-Pinal 1, C. Nuez2, R. Alvarez2; 1IPN, ESIME UC, Universidad Autonoma de San Luis Potosi, MEXICO, 2 Universidad Autonoma de San Luis Potosi, MEXICO S4P7 Design Methodology of Drive Train for a Series-Parallel Hybrid Electric Vehicle (SPHEV) and its Power Flow Control Strategy A. Halvai Niasar1, H. Moghbelli2, A. Vahedi1; 1Iran University of Science & Technology, IRAN, 2Isfahan University of Technology, IRAN

Special Session 5 - Magnetically levitated systems and linear motor drives Session Chair: J. Kirtley, Massachusetts Institute of Technology Salon del Rey Central, 8:00am - 12:00pm S5P1 Linear Synchronous Motor Design R.D. Thornton; MagneMotion Inc., USA S5P2 Quench in High-Temperature Superconducting Motor Field Coils: Experimental Results S.D. Umans, B.A. Shoykhet; 1Consultant, USA, 2Rockwell Automation, USA S5P3 Design of Linear Variable Reluctance Motor Using Computer-Aided Design Assistant N. Chayopitak, D.G. Taylor; Georgia Institute of Technology, USA S5P4 On Electromagnetic Response of the Field Oriented Linear Induction Motor Drives R. Jayabalan1, B. Fahimi1; 1University of Texas at Arlington, USA, 2University of Missouri-Rolla, USA S5P5 Development Status of the General Atomics Urban Maglev Project S. Gurol; General Atomics, USA S5P6 Design and Control of a Linear Propulsion System for an Elevator Using Linear Switched Reluctance Motor Drives H.S. Lim, R. Krishnan, N.S. Lobo; Virginia Tech, USA

Poster Session 5 - Numerical analysis and Modeling of Electromechanical energy Salon del Rey South, 9:00am - 10:00am Thermal Analysis of Induction and Synchronous Reluctance Motors A. Boglietti1, A. Cavagnino1, M. Pastorelli1, A. Vagati1, D. Staton2; 1Politecnico di Torino - Dip. Ing. Elettrica , ITALY, 2 Motor Design Ltd, UK Finite Element Eddy Current Computations in Turbogenerator Solid Rotors and Imperfect Stators R.E. Rettler1, J.R. Brauer2, M. Ravenstahl3; 1ReGENco LLC, USA, 2Milwaukee School of Engineering, USA, 3 Ansoft Corporation, USA Performance Analysis of a 3-Phase Induction Machine with Inclined Static Eccentricity X. Li, S. Nandi; University of Victoria, CANADA Computational Optimization of the Run-up Performance of a HDD Spindle Motor H.N. Phyu1, M.A. Jabbar 2, Z.J. Liu 3; 1Institute of High Performance Computing, SINGAPORE, 2National University of Singapore, SINGAPORE, 3Data Storage Institute, SINGAPORE Analytical Prediction and Reduction of the Cogging Torque in Interior Permanent Magnet Motor G.-H. Kang1, J. Hur2; 1Motor-Net International, KOREA, 2Korea Electronics Technology Institute, KOREA Factors Affecting the Accurate Prediction of Iron Losses in Electrical Machines D.M. Ionel1, M. Popescu2, S.J. Dellinger3, T.J.E. Miller2, M.I. McGilp2, R.J. Heideman1; 1A O Smith Corporation, Corporate Technology Center, USA, 2Glasgow University, UK, 3A O Smith, Electrical Products Company, USA Iron Loss Analysis of Interior Permanent Magnet Synchronous Motors -Variation of Main Loss Factors Due to Driving Condition K. Yamazaki, Y. Seto; Chiba Institute of Technology, JAPAN Towards a Global Optimization of Electromechanical Energy Converters via Exploitation of Convex Characteristics A. Muetze; University of Wisconsin - Madison, USA Spectral Analysis of Novel Hybrid Modulated Asymmetric 5-level Inverter Z.C. Wu,, Y.P. Zou,, K. Ding,; Huazhong University of Science and Technology, CHINA

Induction Motor Model for the Analysis of Capacitive and Induced Shaft Voltages P. Maki-Ontto, J. Luomi; Helsinki University of Technology, FINLAND Practical Analysis Method for Claw-pole type Generator using 2-Dimensional Equivalent model S.O. Kwon1, J.Y. Lee1, J.P. Hong1, Y.S. Lim2, Y. Hur2; 1Changwon National University, KOREA, 2Daewoo Precision, KOREA Application of Response Surface Methodology Combined with Experimental Design for Improving Torque Performance of Interior Permanent Magnet Synchronous Motor S.I. Kim1, J.Y. Lee1, J.P. Hong1, Y.K. Kim2; 1Changwon National University, KOREA, 2Samsung Electronics Co., LTD., KOREA A New Method For Analysis of Rotor Broken Bar Fault in Induction Machines M. Haji1, S.M. Madani2; 1Texas A&M University, USA, 2University of Puerto Rico, PUERTO RICO A Comparative Study of Switched Reluctance Motors with Conventional and Toroidal Windings J.Y. Lee1, B.K. Lee2, J.J. Lee1, J.P. Hong1; 1Changwon National University, KOREA, 2Korea Electrotechnology Research Institute, KOREA

Technical Session 21 - PM machines-V Session Chair: J. Piech, Otis Elevators Session Co-chair: Z. Zhu, University of Sheffield La Corona, 1:30pm - 5:30pm 21P1 Low Cost Sensorless Control of Permanent Magnet Motors. An Overview and Evaluation. D. Montesinos1, S. Galceran1, A. Sudri1, O. Gomis1, F. Blaabjerg2; 1CITCEA - UPC, SPAIN, 2Institute of Energy Technology, DENMARK 21P2 Nonlinear Adaptive Position Control of an Interior Permanent Magnet Synchronous Motor J. Lau, M. Uddin; Lakehead University, CANADA 21P3 Performance Comparison between Low-Speed Axial-Flux and Radial-Flux Permanent-Magnet Machines Including Mechanical Constraints A. Parviainen1, J. Pyrhnen1, M. Niemel1, J. Mantere2; 1Lappeenranta University of Technology , FINLAND, 2ABB Oy, FINLAND 21P4 Scalability of Surface PM Machines with Concentrated Windings Designed to Achieve Wide Speed Ranges of Constant-Power Operation A.M. EL-Refaie, T.M. Jahns; University of Wisconsin - Madison, USA 21P5 Developing a Brushless Permanent Magnet Synchronous Drive for a X-Ray Microscope Condenser in UltraHigh Vacuum J. Merwerth1, A. Oswald1, M. Hrz1, H.-G. Herzog1, T. Eimller2, R. Vatter2, H.-D. Castanjen2; 1Fachgebiet Energiewandlungstechnik, Technische Universitt Mnchen, GERMANY, 2Max-Planck-Institut fr Metallforschung, GERMANY 21P6 A New Trapezoidal Shaped-Pole Permanent Magnet Machine T.A. Lipo1, S.M. Madani2, C.E. Nio2, D. Lugo2; 1University of Wisconsin, USA, 2University of Puerto Rico, PUERTO RICO 21P7 The Chorus Meshcon Solution for Starter-Generators I.W. Cox, J.S. Edelson; Chorus Motors plc, GIBRALTAR

Technical Session 22 - AC/DC Drives-V Session Chair: B.K. Lee, KEIT Session Co-chair: L. Petersen, Office of Naval Research La Duquesa, 1:30pm - 5:30pm 22P1 Comparative Study of Stabilizing Controllers for Brushless DC Motor Drive Systems X.Y. Liu1, A.J. Forsyth2; 1The University of Birmingham, UK, 2The University of Manchester, UK 22P2 A Fast Optimal Flux Search Controller with Improved Steady State Behavior for DTC Based Induction Motor Drives S. Kaboli1, E. Vahdati-Khajeh1, M. Zolghadri1, A. Homaifar2; 1Sharif University of Technology, IRAN, 2North Carolina A&T State University, USA 22P3 Time-Domain Design of Motor Drive Current Regulators Using Genetic Algorithms B. Cassimere1, S. Sudhoff1, B. Cassimere1, D. Aliprantis3, M. Swinney2; 1Purdue University, USA, 2Greek Army, GREECE, 3Reliance Electric, USA 22P3 The Neutral Point Clamped Resonant DC Link Converter A New Three Level Soft Switched Topology I.T. Wallace1, A.R. Bendre2, G. Venkataramanan3; 1Eaton Corporation, Innovation Center, USA, 2DRS Power & Control Technologies, Inc. , USA, 3University of Wisconsin - Madison, USA 22P4 On the Performance of Optimal Flux Search Controller for DTC Based Induction Motor Drives S. Kaboli1, M. Zolghadri1, E. Vahdati-khajeh1, A. Homaifar2; 1Sharif university of Technology, IRAN, 2North Carolina A&T State University, USA 22P5 Design Considerations for Reactive Elements and Control Parameters for Three Phase Boost Rectifiers B. Shi1, G. Venkataramanan1, N. Sharma2; 1University of Wisconsin - Madison, USA, 2Hamilton Sundstrand, USA 22P6 A Self-adaptive Space Phasor Based Hysteresis Current Controller with Switching of Adjacent Inverter Voltage Vectors for Three-level Voltage Source Inverter Fed Induction Motor Drive P.N. Tekwani, R.S. Kanchan, K. Gopakumar; CEDT, Indian Institute of Science, INDIA

Technical Session 23 - Automotive applications-II Session Chair: A. Omekanda, Delphi Session Co-chair: A. Emadi, Illinois Institute of Technology La Princesa, 1:30pm - 5:30pm 23P1 Designs for a New, Quick-Response, Latching Electromagnetic Valve J. Kim, D.K. Lieu; University of California at Berkeley, USA 23P2 Current/Voltage Based Detection of Faults in Gears Coupled to Electric Motors S. Rajagopalan1, T.G. Habetler1, R.G. Harley1, T. Sebastian2, B. Lequesne3; 1Georgia Institute of Technology, USA, 2Delphi Saginaw Steering Systems, USA, 3Delphi Research Labs, USA 23P3 Design Procedure for Brushless PM Traction Machines for Electric Vehicle Applications N. Schofield1, C. Giraud-Audine2; 1The University of Manchester, UK, 2Metz University, FRANCE 23P4 A H2 PEM Fuel Cell and High Energy Dense Battery Hybrid Energy Source for an Urban Electric Vehicle N. Schofield1, H.T. Yap1, C.M. Bingham2; 1The University of Manchester, UK, 2The University of Sheffield, UK 23P5 Optimization of Power Flow Management in a Fuel-Cell Supplied Vehicle for Public City Transportation M. Andriollo, T. Bertoncelli, S. Carmeli, M. Tamburrino; Polytechnic of Milan, ITALY 23P6 Performance Analysis of Two BDCM Drives for Traction Applications H. Zeroug1, B. Boukais2; 1University of Sciences and Technology Houari-Boumediene, ALGERIA, 2University of Mouloud Mammeri, ALGERIA 23P7 High Power Interleaved Boost Converter in Fuel Cell Hybrid Electric Vehicle H. Xu, X. Wen, E. Qiao, X. Guo, L. Kong; Institute of Electrical Engineering, Chinese Academy of Sciences, CHINA

Technical Session 24 - Special applications of machines and drives-II Session Chair: J. Gieras, United Technologies Session Co-chair: P. Krein, UIUC La Reina, 1:30pm - 5:30pm 24P1 Time Harmonics Investigation of Stator and Rotor Currents of a Dedicated Induction Machine L. Donadio1, M. Zucca1, A. Bellini2, C. Concari3, E. Lorenzani3; 1IEN Galileo Ferraris, ITALY, 2DISMI, University of Modena and Reggio Emilia, ITALY, 3University of Parma, ITALY 24P2 Passive Contactless Levitated Axial Flux Machine with Permanent Magnetic Disc Rotor for a Implantable Ventricular Assist Device M. Hoerz1,3, H.G. Herzog1,3, N. Mendler2,3; 1Fachgebiet Energiewandlungstechnik, GERMANY, 2Deutsches Herzzentrum, GERMANY, 3Technische Universitaet Muenchen, GERMANY 24P3 Space Mapping Optimization of a Cylindrical Voice Coil Actuator L. Encica, J. Makarovic, E.A. Lomonova, A.J.A. Vandenput; Eindhoven University of Technology, NETHERLANDS 24P4 Sensorless Operation of a Permanent Magnet Generator for Aircraft S.G. Burrow1, P.H. Mellor1, P. Churn1, T. Sawata2, M. Holme2; 1University of Bristol, UK, 2Goodrich Corporation, Electromagnetic Systems Technical Centre, UK 24P5 Control of Machine of Welding MIG using Controller Fuzzy P.V.J. Petronio1, D.M.B. Bolhosa1, M.S. Sadala2, A. Cezar1; 1Federal University of Para, BRAZIL, 2Federal Center of Education Technology of Para , BRAZIL 24P6 AC Impedance Measurement Techniques Y.L. Familiant1, K.A. Corzine1, J. Huang1, M. Belkhayat2; 1University of Missouri-Rolla, USA, 2Newport News Shipbuilding, USA 24P7 Reduced Switch Count Multi-Motor Drive Systems C.B. Jacobina1, O.I. da Silva1,2, E.C. Santos Jr.1, A.M.N. Lima1; 1DEE-UFCG, BRAZIL, 2CEFET-PE, BRAZIL

Technical Session 25 - Fault tolerance and diagnostics Session Chair: M. K. Guven, Caterpillar Session Co-chair: E. Levi, Liverpool John Moores University La Vista, 1:30pm - 5:30pm 25P1 The Design of Fault Tolerant Machines for Aerospace Applications G.J. Atkinson1, B.C. Mecrow1, A.G. Jack1, D.J. Atkinson1, P. Sanga2, M. Benarous2; 1University of Newcastle Upon Tyne, UK, 2Goodrich Corporation, UK 25P2 Design and Initial Testing of an Outer Rotating Segmented Rotor Switched Reluctance Machine for an Aeroengine Shaft-Line-Embedded Starter / Generator R. Hall, A.G. Jack, B.C. Mecrow; University of Newcastle Upon Tyne, UK 25P3 The Effect of Induction Motor Rotor Eccentricity on Surge Test Data X. Huang1, T. Habetler1, R. Harley1, E. Wiedenbrug2; 1Georgia Institute of Technology, USA, 2Baker Instrument Company , USA 25P4 Mechanical Load Fault Detection in Induction Motors by Stator Current Time-Frequency Analysis M. Bldt1, M. Chabert2, J. Faucher 1, B. Dagues1; 1Laboratoire dElectrotechnique et dElectronique Industrielle , FRANCE, 2ENSEEIHT / IRIT / TSA, FRANCE 25P5 Separating Load Torque Oscillation and Rotor Fault Effects in Stator Current-Based Motor Condition Monitoring L. Wu, T. Habetler, R. Harley; Georgia Institute of Technology, USA 25P6 Application of Supervised and Unsupervised Neural Networks for Broken Rotor Bar Detection in Induction Motors F. Cupertino, V. Giordano, E. Mininno, L. Salvatore; Politecnico di Bari, ITALY 25P7 Elimination of Position and Current Sensors in High Performance Adjustable Speed AC Drives H. Wang1, B. Fahimi2, S. Pekarek3; 1Pioneer Magnetics, USA, 2University of Texas at Arlington, USA, 3Purdue University, USA

Special Session 6 - Large turbogenerators maintenance and life expectancy Session Chair: M. El-Sharkawi, University of Washington Salon del Rey North, 1:30pm - 5:30pm S6P1 Fretting Fatigue of Slot-dovetail in Turbo-generator Rotor Shaft H. Ito, S. Takahashi, K. Matsuyama, H. Koinuma, S. Harada, Y. Yoshioka, K. Nagata; Toshiba Corporation, JAPAN S6P2 Condition Assessment of Rotating Machine Winding Insulation by Analysis of Charging and Discharging Currents G. Soltani1, E. David2, H. Akbari1, H. Mehrjerdi1; 1Niroo Research Institute(NRI), IRAN, 2Ecole de Technologie Superieure, Montreal, Canada, CANADA S6P3 Comparison of the Vibration of 2-Pole and 4-Pole Cylindrical-rotor Alternators due to Shorted-turns in the Field Winding I. Kerszenbaum1, G. Klempner2; 1Southern California Edison, USA, 2Nuclear Safety Solutions, USA S6P4 Root-cause Diagnostics of Generator Service Failures C.V. Maughan; Maughan Engineering Consultants, USA

Poster Session 6 - Miscellaneous applications of electromechanical energy conversion devices Salon del Rey South, 3:30pm - 4:30pm Control System of Doubly Fed Induction Generators Based Wind Turbines with Production Limits F. Jurado; University of Jaen, SPAIN On-line monitoring of Insulation Aging in AC Motors Fed by PWM Inverters P. Werynski, D. Roger, R. Corton, J.F. Brudny; LSEE - Universit d'Artois, FRANCE PZT Actuators for Active Compensation of S.R.M. Vibration: Open-loop Experimental Results X. Mininger1, M. Gabsi1, M. Lcrivain1, E. Lefeuvre2, C. Richard2, D. Guyomar2; 1SATIE, UMR CNRS 8029, ENS de Cachan, FRANCE, 2LGEF, INSA de Lyon, FRANCE A Novel Soft-Switching Converter for Switched Reluctance Motor: Analysis, Design and Experimental Results J.W. Luo, Q.H. Zhan; Huazhong University of Science and Technology, CHINA Effect of Unbalanced Supply Conditions on the Performance of Induction Machines for Aerospace Applications J.F. Eastham1, M. Benarous2; 1University of Bath, UK, 2Goodrich Corporation, Electromagnetic Systems Technical Centre, UK A New Condition Monitoring and Fault Diagnosis System of Induction Motors using Artificial Intelligent Algorithms T. Han1, B.S. Yang1, J.M. Lee2,; 1Pukyong National University, KOREA, 2Reseach Center, Hyundai Heavy Industries Co, Ltd., KOREA Matrix Converter Control for High Speed Generators T.J. Sobczyk, T. Sienko; Cracow University of Technology, POLAND An Improved Rotor Resistance Identification for Bearingless Induction Motors D. Akamatsu1, A. Chiba1, T. Fukao2, M.A. Rahman3; 1Tokyo University of Science, JAPAN, 2Musashi Institute of Technology, JAPAN, 3Memorial University of Newfoundland, CANADA

Axial Flux Concentration Technique Applied to the Design of Permanent Magnet Motors: Theoretical Aspects and their Numerical and Experimental Validation I.C. Chabu, V.C. Silva, S.I. Nabeta, M.A.M. Afonso, J.R. Cardoso; Escola Politcnica da Universidade de So Paulo, LMAG/PEA, BRAZIL A New Efficiency Optimization Method on Vector Control of Induction Motors J. Li1, L. Xu1, Z. Zhang2; 1The Ohio State University, USA, 2Whirlpool Corporation, USA Encoderless Operation of Induction Motor using a MRAS Observer with Zero Drift Feedback Integrator Q. Gao1, C. Spiteri Staines1, G.M. Asher1, M. Sumner2; 1University of Nottingham, UK, 2University of Malta, MALTA Reduction of Torque Ripple in AC Motor Drives for Electric Power Steering G.H. Lee1, G.Y. Nam2, J.Y. Lee1, J.P. Hong1, C.M. Lee1, G.S. Choi3; 1Changwon National University, KOREA, 2 Korea Electrotechnology Research Institute, KOREA, 3Daewoo Precision Industries Co. LTD., KOREA A Novel High-Speed Flywheel Based DC Voltage Source with Soft Handover Capability M.M. Flynn1, A. Paylan2; 1University of Texas, USA, 2Vycon Inc., USA Saturation Modulation in Voltage Zero Sequence-Based Encoderless Techniques - Part II: Implementation Issues A. Consoli1, G. Scarcella1, G. Scelba1, S. Royak2, M. Harbaugh2; 1DIEES - University of Catania, ITALY, 2Rockwell Automation, USA

Author Index
Select a letter below to jump directly to that section of the Author Index:

A G M S

B H N T

C I O U Y

D J P V Z

E K Q W

F L R X

Abed, N.

Study of High Frequency Model of Permanent Magnet Motor

Abolhassani, M.T.

A Novel Multiphase Fault Tolerant High Torque Density Permanent Magnet Motor Drive for Traction Application A New Concentrated Windings Surface Mounted Permanent Magnet Synchronous Machine for Wind Energy Application

Acharya, D.

Analysis and Test of a High-Speed Axial Flux Permanent Magnet Synchronous Motor Design of a Super-High Speed Permanent Magnet Synchronous Motor for Cryogenic Applications

Afjei, E.

A Hybrid Converter for High Speed Operation of Switched Reluctance Motor Drives

Afonso, M.A.M.

Axial Flux Concentration Technique Applied to the Design of Permanent Magnet Motors: Theoretical Aspects and their Numerical and Experimental Validation

Akabar, A.

Two Techniques for Modeling an Induction Motor with Skewed Slots with a Time-Stepping 2D-3D Finite Element Method

Akamatsu, D.

An Improved Rotor Resistance Identification for Bearingless Induction Motors

Aliprantis, D.

IGBT and PN Junction Diode Loss Modeling for System Simulations Time-Domain Design of Motor Drive Current Regulators Using Genetic Algorithms

Alvarez, R.

Multi-motor Synchronization Technique applied in Traction Devices

Alves Andrade, D.

A New Strategy for Differential Overvoltages and Common-Mode Currents Determination in PWM Induction Motor Drives

Alzingre, J.

A Novel Linear Actuator using a Low Cost Stepper Motor with Integrated Stall Detection

Amara, Y.

Homopolar and Bipolar Hybrid Excitation Synchronous Machines

Ambrozic, V.

Predictive Torque Control of Induction Machines using Immediate Flux Control

Amrhein, M.

Evaluation of a Re-Rated Induction Machine

Andriollo, M.

Optimization of Power Flow Management in a Fuel-Cell Supplied Vehicle for Public City Transportation

Antnio Arantes de Freitas, M.

A New Strategy for Differential Overvoltages and Common-Mode Currents Determination in PWM Induction Motor Drives

Anwar, M.N.

Switched Reluctance Machine Converter Design for ISA Applications from Engine Cranking Perspectives

Apsley, J.M.

Analysis of Multi-Phase Induction Machines with Winding Faults

Arakere, N.

Design of a Super-High Speed Permanent Magnet Synchronous Motor for Cryogenic Applications

Arita, H.

A High Precision Motor Design Method by Finite Element Analysis Considering Stress Distribution in Stator Core

Aroquiadassou, G.

Design Comparison of Two Rotating Electrical Machines for 42V Electric Power Steering

Asher, G.M.

Sensorless Speed, Position and Torque Control using AC Machine Saliencies Encoderless Operation of Induction Motor using a MRAS Observer with Zero Drift Feedback Integrator

Asuri, S.

Variable Frequency Control of an Induction Motor Drive with Reduced Switching Devices

Atkinson, D.J.

A Prototype Electrical Actuator for Aircraft Flaps and Slats The Design of Fault Tolerant Machines for Aerospace Applications

Atkinson, G.J.

The Design of Fault Tolerant Machines for Aerospace Applications

Attaianese, C.

Multi Drives Modulation Synchronization via Field-Bus VSI Parallel Operation for Active Filtering in High Power Drives

Aviyente, S.

Failure Prognosis for Permanent Magnet AC Drives Based on Wavelet Analysis

Azzouzi, J.

Analytical Modeling of an Axial Flux Permanent Magnet Synchronous Generator for Wind Energy Application

Ba-Razzouk, A.

Accurate Adaptive Integration Algorithms for Induction Machine Drive over a Wide Speed Range Open-Loop Speed Estimator Design for Online Induction Machine Synchronous Speed tracking

Babar, A.A.S.

On Minimizing the Fluctuations in the Power Generated from a Wave Energy Plant

Baelmans, M.

Integrated Solution for Micro Power Generation

Bailey, J.M.

Impact of Continuous Conduction on the Constant Power Speed Range of the Switched Reluctance Motor

Bailey, J M.

Back EMF Calculations for Axial-Gap Permanent Magnet Synchronous Motors (AGPMSM) with Disc Magnets

Bakie, E.B.

Analysis of Synchronous Generator Internal Insulation Failures

Bakis, C.E.

Ultrahigh Speed Permanent Magnet Motor/Generator for Aerospace Flywheel Energy Storage Applications

Bao, G.Q.

A New Transverse Flux Permanent Motor for Direct Drive Application

Barakat, G.

Analytical Modeling of an Axial Flux Permanent Magnet Synchronous Generator for Wind Energy Application

Baroudi, J.A.

A Review of Power Converter Topologies for Wind Generators

Bazzaz, P.

A Hybrid Converter for High Speed Operation of Switched Reluctance Motor Drives

Beliaev, D.

Field Oriented Control of a Synchronous Drive

Belkhayat, M.

AC Impedance Measurement Techniques

Bellini, A.

Induction Drives Diagnosis by Signal Injection: Effectiveness and Severity Classification Time Harmonics Investigation of Stator and Rotor Currents of a Dedicated Induction Machine

Belmans, R.

Integrated Solution for Micro Power Generation

Belmans, R.B.

A Hybrid High speed Electrical Micromachine for Micro Scale Power Generation

Benarous, M.

The Design of Fault Tolerant Machines for Aerospace Applications Effect of Unbalanced Supply Conditions on the Performance of Induction Machines for Aerospace Applications

Benbouzid, M.E.H.

Fuzzy Detection and Diagnosis of Fault Modes in a Voltage-Fed PWM Inverter Induction Motor

Bendre, A.

Design Considerations for Neutral Point Clamped Converters

Bendre, A.R.

The Neutral Point Clamped Resonant DC Link Converter A New Three Level Soft Switched Topology

Bennett, J.W.

A Prototype Electrical Actuator for Aircraft Flaps and Slats

Bensaker, B.B.

Two-Port Circuits Based Hybrid Model of Synchronous Machine

Berkopec, W.E.

Impact of Inductor Placement on the Performance of Adjustable Speed Drives Under Input Voltage Unbalance and Sag Conditions

Bertoncelli, T.

Optimization of Power Flow Management in a Fuel-Cell Supplied Vehicle for Public City Transportation

Betin, F.

Design Comparison of Two Rotating Electrical Machines for 42V Electric Power Steering

Bhiwapurkar, N.

Study of New Stator Pole Geometry for improvement of SRM Torque Profile

Bianchi, N.

Design Considerations on Fractional-Slot Fault-Tolerant Synchronous Motors

Biedinger, J.M.

Design Comparison of Two Rotating Electrical Machines for 42V Electric Power Steering Integrated Starter Generator: Need of an Optimal Design and Control Approach. Application to a Permanent Magnet Machine

Binder, A.

Calculation of Motor Capacitances for Prediction of Discharge Bearing Currents in Machines of Inverter-Based Drive System Dynamic Simulation of Induction Machines Taken into Account Winding Distribution, Slotting and Saturation Effects Calculation of the Influence of Insulated Bearings and Insulated Inner Bearing Seats on Circulating Bearing Currents in Machines of Inverter-Based Drive Systems

Bingham, C.M.

A H2 PEM Fuel Cell and High Energy Dense Battery Hybrid Energy Source for an Urban Electric Vehicle

Blaabjerg, F.

Low Cost Sensorless Control of Permanent Magnet Motors. An Overview and Evaluation.

Blasko, V.

Impact of Inductor Placement on the Performance of Adjustable Speed Drives Under Input Voltage Unbalance and Sag Conditions

Bldt, M.

Mechanical Load Fault Detection in Induction Motors by Stator Current Time-Frequency Analysis

Bodson, M.

An Online Rotor Time Constant Estimator for the Induction Machine

Boel, R.K.

A Nonlinear Model for Synchronous Machines to Describe High-Frequency Signal Based Position Estimators

Bogani, T.

Synergetic Control of PMSM Drives for High Dynamic Applications

Boglietti, A.

Experimental High Frequency Parameter Identification of AC Electrical Motors Evaluation of the Radiation Thermal Resistance in Industrial Motors Comparison of Lamination Iron Losses Supplied by PWM Voltages: US and European Experiences Thermal Analysis of Induction and Synchronous Reluctance Motors

Boldea, I.

Advanced Optimization Design Techniques for Automotive Interior Permanent Magnet Synchronous Machines A Fractional Slot Axial Flux PM Direct Drive

Bolhosa, D.M.B.

Control of Machine of Welding MIG using Controller Fuzzy

Bolognani, S.

Design Considerations on Fractional-Slot Fault-Tolerant Synchronous Motors

Borsje, P.

A Comparative Study of Kalman Filtering for Sensorless Control of a Permanent-Magnet Synchronous Motor Drive

Bottiglieri, G.

Saturation Modulation in Voltage Zero Sequence-Based Encoderless Techniques - Part I: Harmonic Analysis

Boukais, B.

Performance Analysis of Two BDCM Drives for Traction Applications

Bouscayrol, A.

Weighted Control of Traction Drives with Parallel-connected AC Machines Desensitization to Voltage Sags of a Rewinder by Using an Active Dancer Roll for Tension Control

Bowers, W.

Hybrid Electric Vehicle DC-Bus Traction Drive Harmonics

Bradley, K.

Assessing the Impacts of Rewind and Repeated Rewinds on Induction Motors: Is an Opportunity for Re-Designing the Machine Being Wasted? Improvements in Air Flow in the End Region of a Large Totally Enclosed Fan Cooled Induction Motor Operating Induction Motor Drives with Turn-to-Turn Faults

Brauer, J.R.

Complete Nonlinear Magnetic-Thermal-Stress Design of Radial Field Multipole NdFeB Permanent Magnet Cylinder Finite Element Eddy Current Computations in Turbogenerator Solid Rotors and Imperfect Stators

Brudny, J.F.

On-line monitoring of Insulation Aging in AC Motors Fed by PWM Inverters

Brush, E.F.

Performance of Motors with Die-cast Copper Rotors in Industrial and Agricultural Pumping Applications

Buck, K.

The Modeling and Simulation of a Permanent Magnet Synchronous Motor with Direct Torque Control Based on MATLAB/SIMULINK

Burrow, S.G.

Sensorless Operation of a Permanent Magnet Generator for Aircraft

Cabrita, C.P.

Linear Switched Reluctance Motor. A New Topology for Fault Tolerant Traction Applications

Calado, M.R.A.

Linear Switched Reluctance Motor. A New Topology for Fault Tolerant Traction Applications

Cale, J.

Genetic Algorithm Based Design of a Permanent Magnet Synchronous Machine

Cancelliere, P.

A Fractional Slot Axial Flux PM Direct Drive A Tubular Generator for Marine Energy Direct Drive Applications

Cao, W.

Assessing the Impacts of Rewind and Repeated Rewinds on Induction Motors: Is an Opportunity for Re-Designing the Machine Being Wasted?

Cao, Z.-T.

Cogging Force and its Estimation using a Neural Network Based on 2D Field Model of PMLSM

Capolino, G.A.

Design Comparison of Two Rotating Electrical Machines for 42V Electric Power Steering Broken Rotor Bars Fault Detection in Squirrel Cage Induction Machines

Capraro, D.

Multi Drives Modulation Synchronization via Field-Bus

Caprio, M.T.

Advanced Induction Motor Endring Design Features for High Speed Applications

Cardoso, A.J.M.

Thermal Behaviour of a Three-Phase Induction Motor Fed by a Fault Tolerant Voltage Source Inverter

Cardoso, J.R.

Axial Flux Concentration Technique Applied to the Design of Permanent Magnet Motors: Theoretical Aspects and their Numerical and Experimental Validation

Carella, F.

High Reliable Near-Zero Speed Control for Sinusoidal PMSM Drives with Low Resolution Position Sensors

Carmeli, S.

Double Fed Induction Machine Drive: Proposal of a Speed Sensorless Control Based on a MRAS. Optimization of Power Flow Management in a Fuel-Cell Supplied Vehicle for Public City Transportation

Caruana, C.

Sensorless Speed, Position and Torque Control using AC Machine Saliencies

Cassimere, B.

IGBT and PN Junction Diode Loss Modeling for System Simulations IGBT and PN Junction Diode Loss Modeling for System Simulations Genetic Algorithm Based Design of a Permanent Magnet Synchronous Machine Time-Domain Design of Motor Drive Current Regulators Using Genetic Algorithms Time-Domain Design of Motor Drive Current Regulators Using Genetic Algorithms

Castanjen, H.-D.

Developing a Brushless Permanent Magnet Synchronous Drive for a X-Ray Microscope Condenser in Ultra-High Vacuum

Castelli Dezza, F.

Double Fed Induction Machine Drive: Proposal of a Speed Sensorless Control Based on a MRAS.

Cavagnino, A.

Experimental High Frequency Parameter Identification of AC Electrical Motors Evaluation of the Radiation Thermal Resistance in Industrial Motors Comparison of Lamination Iron Losses Supplied by PWM Voltages: US and European Experiences Thermal Analysis of Induction and Synchronous Reluctance Motors

Cendes, Z.J.

Complete Nonlinear Magnetic-Thermal-Stress Design of Radial Field Multipole NdFeB Permanent Magnet Cylinder Curvilinear Finite Elements for Modeling the Sliding Surface in Rotating Electrical Machines and its Applications

Cezar, A.

Control of Machine of Welding MIG using Controller Fuzzy

Chabert, M.

Mechanical Load Fault Detection in Induction Motors by Stator Current Time-Frequency Analysis

Chabot, F.

Homopolar and Bipolar Hybrid Excitation Synchronous Machines

Chabu, I.C.

Axial Flux Concentration Technique Applied to the Design of Permanent Magnet Motors: Theoretical Aspects and their Numerical and Experimental Validation

Chan, T.F.

A Comparative Study of Kalman Filtering for Sensorless Control of a Permanent-Magnet Synchronous Motor Drive

Chang, Y.C.

Position Control of a Sensorless Interior Permanent Magnet Synchronous Motor System

Chapman, P.L. Efficiency Issues in Variable-Capacitance Micromotor Drives Charpentier, J.F.

Analytical and Numerical Study of a New Kind of PM Brushless Motor with Trapezoidal EMF for Low Cost and Low Inertia Applications

Chaves, L.R.M.

A New Strategy for Differential Overvoltages and Common-Mode Currents Determination in PWM Induction Motor Drives

Chayopitak, N.

Thermal Analysis of Linear Variable Reluctance Motor for Manufacturing Automation Applications Design of Linear Variable Reluctance Motor Using Computer-Aided Design Assistant

Chedot, L.

Integrated Starter Generator: Need of an Optimal Design and Control Approach. Application to a Permanent Magnet Machine

Chen, C.-L.

A Novel High Frequency Induction Motor with Single-Phase Rotor Conductor and Position Sensor

Chen, H.-P.

Cogging Force and its Estimation using a Neural Network Based on 2D Field Model of PMLSM

Chen, J.

Parallel Operation System of High Frequency modularized UPS Based on Distributed Logic Control The Restrain of the Dead Time Effects in Parallel Inverters Genetic Algorithm Optimized Fuzzy Repetitive Controller for Low Cost UPS Inverter Applications

Chen, W.-S.

A Novel High Frequency Induction Motor with Single-Phase Rotor Conductor and Position Sensor

Chen, X.

Parallel Operation System of High Frequency modularized UPS Based on Distributed Logic Control The Restrain of the Dead Time Effects in Parallel Inverters

Chen, Y.-M.

Optimal Design of a Micro Axial Flux Switched-Reluctance Motor

Cheong, D.

A Low-Cost and Efficient Permanent Magnet Assisted Synchronous Reluctance Motor Drive

Chi, S.

Development of Sensorless Vector Control for a PMSM Running up to 60,000 rpm

Chiasson, J.

An Online Rotor Time Constant Estimator for the Induction Machine

Chiba, A.

An Improved Rotor Resistance Identification for Bearingless Induction Motors

Cho, H.W.

Dynamic Characteristic Analysis and Control Parameter Estimation of Tubular Type Moving-Magnet Linear Actuator with Halbach Array

Choi, C.

Diminution of Current Measurement Error for Vector Controlled AC Motor Drives

Choi, C.H.

A Novel Internal Fault Analysis of a Brushless DC Motor Using Winding Function Theory Extraction of Induction Motor Fault Characteristics in Frequency Domain and Fuzzy Entropy

Choi, D.K.

Modeling, Simulation and Analysis of a Homopolar Generator with Input Limiter

Choi, G.S.

Reduction of Torque Ripple in AC Motor Drives for Electric Power Steering

Choi, J.Y.

Electromagnetic Analysis of High Speed Machines with Diametrically Magnetized Rotor, Considering Slotting Effect and Applied to New Magnetization Modeling Dynamic Characteristic Analysis and Control Parameter Estimation of Tubular Type Moving-Magnet Linear Actuator with Halbach Array

Choi, S.H.

Modeling, Simulation and Analysis of a Homopolar Generator with Input Limiter

Chow, L.

Analysis and Test of a High-Speed Axial Flux Permanent Magnet Synchronous Motor Design of a Super-High Speed Permanent Magnet Synchronous Motor for Cryogenic Applications

Churn, P.

Sensorless Operation of a Permanent Magnet Generator for Aircraft

Cilia, J.

Sensorless Speed, Position and Torque Control using AC Machine Saliencies

Cirrincione, G.

A New Direct Torque Control Strategy for the Minimization of Common-mode emissions

Cirrincione, M.

A New Direct Torque Control Strategy for the Minimization of Common-mode emissions

Concari, C.

Induction Drives Diagnosis by Signal Injection: Effectiveness and Severity Classification Time Harmonics Investigation of Stator and Rotor Currents of a Dedicated Induction Machine

Consoli, A.

Saturation Modulation in Voltage Zero Sequence-Based Encoderless Techniques - Part I: Harmonic Analysis Saturation Modulation in Voltage Zero Sequence-Based Encoderless Techniques - Part II: Implementation Issues

Correa, M.B.R.

Sensorless IFOC for Single-Phase Induction Motor Drive System Component Minimized AC-AC Single-Phase to Three-Phase-Four-Wire Converters Five-Leg Converter Dual-Winding AC Drive Systems AC Drive Systems Using Four-Leg Converter with Maximum DC-Bus Voltage Utilization

Corton, R.

On-line monitoring of Insulation Aging in AC Motors Fed by PWM Inverters

Corzine, K.

WTHD-Optimal Staircase Modulation of Single-Phase Multilevel Inverters

Corzine, K.A.

Distributed Control of Hybrid Motor Drives Advanced Control of Cascaded Multilevel Drives Based on P-Q Theory AC Impedance Measurement Techniques

Cowie, J.G.

Performance of Motors with Die-cast Copper Rotors in Industrial and Agricultural Pumping Applications

Cox, I.W.

The Chorus Meshcon Solution for Starter-Generators

Crescimbini, F.

High Reliable Near-Zero Speed Control for Sinusoidal PMSM Drives with Low Resolution Position Sensors

Cudley, D.

A Prototype Electrical Actuator for Aircraft Flaps and Slats

Cupertino, F.

Application of Supervised and Unsupervised Neural Networks for Broken Rotor Bar Detection in Induction Motors

Cuzner, R.

Design Considerations for Neutral Point Clamped Converters

D'hulst, R.

Integrated Solution for Micro Power Generation

da Silva, O.I.

Reduced Switch Count Multi-Motor Drive Systems

da Silveira, M.A.

An Analytical Solution for the Normal Force in Linear Actuators

Dagues, B.

Mechanical Load Fault Detection in Induction Motors by Stator Current Time-Frequency Analysis

Dai Pre', M.

Design Considerations on Fractional-Slot Fault-Tolerant Synchronous Motors

Daikoku, A.

A High Precision Motor Design Method by Finite Element Analysis Considering Stress Distribution in Stator Core

Dakyo, B.

Analytical Modeling of an Axial Flux Permanent Magnet Synchronous Generator for Wind Energy Application

Daniels, D.S.

Back EMF Calculations for Axial-Gap Permanent Magnet Synchronous Motors (AGPMSM) with Disc Magnets

De Belie, F.M.L.L.

A Nonlinear Model for Synchronous Machines to Describe High-Frequency Signal Based Position Estimators

De Doncker, R.W.

Simplified Unbalanced Force Calculation in Switched Reluctance Machines Using Electromagnetic Circuit Model Acoustic Noise in Switched Reluctance Drives: An Aerodynamic Problem?

de Paula, H.

A New Strategy for Differential Overvoltages and Common-Mode Currents Determination in PWM Induction Motor Drives

de Vilder, G.J.

Comparison of Direct-Drive and Geared Generator Concepts for Wind Turbines

Degobert, P.

Minimum Torque Ripple Control of Permanent Magnet Synchronous Motor in the Stationary Reference Frame

Delarue, P.

Weighted Control of Traction Drives with Parallel-connected AC Machines

Delli Colli, V.

A Fractional Slot Axial Flux PM Direct Drive A Tubular Generator for Marine Energy Direct Drive Applications

Dellinger, S.J.

Factors Affecting the Accurate Prediction of Iron Losses in Electrical Machines

Demerdash, N.A.O.

A Condition Monitoring Vector Database Approach for Broken Bar Fault Diagnostics of Induction Machines On Innovative Methods of Induction Motor Inter-Turn and Broken-Bar Fault Diagnostics

Desai, P.

A Novel Digital Control Technique for Brushless DC Motor Drives: Current Control

Desai, R.

On Minimizing the Fluctuations in the Power Generated from a Wave Energy Plant

Deshpande, U.D.

Torque Ripple Tester for a Permanent Magnet Synchronous Motor

Di Gerlando, A.

Design and Operation Aspects of Field Regulated PM Synchronous Machines with Concentrated Armature Windings Modelling and Test Validation of High Speed Universal Motors Fed via a Triac

Di Napoli, A.

High Reliable Near-Zero Speed Control for Sinusoidal PMSM Drives with Low Resolution Position Sensors Synergetic Control of PMSM Drives for High Dynamic Applications

Di Stefano, R.

A Tubular Generator for Marine Energy Direct Drive Applications

Diallo, D.

Fuzzy Detection and Diagnosis of Fault Modes in a Voltage-Fed PWM Inverter Induction Motor

Diaz, H.J.

Research of the Overheating in Three Synchronous Generators of 71,9 MVA.

Daz, H.J.

Development of a Solution for an Overheating Problem and Reactive Power Increase in the Three Generator Units of a Hydroelectric Power Plant

Dickinson, P.G.

Axial Flux Motors Using Compacted Insulated Iron Powder and Laminations Design and Test Results

Dinavahi, V.R.

A Review of Power Converter Topologies for Wind Generators

Ding, K.

A High-Performance Five-Level Single-Phase Inverter Using Repetitive Control and State Feedback Spectral Analysis of Novel Hybrid Modulated Asymmetric 5-level Inverter

Diong, B.

WTHD-Optimal Staircase Modulation of Single-Phase Multilevel Inverters

Donadio, L.

Time Harmonics Investigation of Stator and Rotor Currents of a Dedicated Induction Machine

Dong, G.

Variable Frequency Control of an Induction Motor Drive with Reduced Switching Devices

Dong, J.

Determination of Parameters for Internal Permanent Magnet Synchronous Motors

Dopheide, J.

Low Cost Vector Control for Permanent-Magnet-Synchronmotor with only One DC-Link Current Sensor for Pumping Application

Doppelbauer, M.

Performance of Motors with Die-cast Copper Rotors in Industrial and Agricultural Pumping Applications

dos Santos, P.M.

Sensorless IFOC for Single-Phase Induction Motor Drive System

dos Santos Jr., E.C.

Sensorless IFOC for Single-Phase Induction Motor Drive System

Douglas, H.

The Impact of Wavelet Selection on Transient Motor Current Signature Analysis

Dravid, N.V.

Design Aspects of a High Speed Permanent Magnet Synchronous Motor / Generator for Flywheel Applications

Driesen, J.

Integrated Solution for Micro Power Generation

Driesen, J.D.

A Hybrid High speed Electrical Micromachine for Micro Scale Power Generation

Duan, S.X.

Genetic Algorithm Optimized Fuzzy Repetitive Controller for Low Cost UPS Inverter Applications

Duque, O.

Detection of Bearing Faults in Cage Induction Motors Fed by Frequency Converter using Spectral Analysis of Line Current

Duran, M.J.

Independent Vector Control of Asymmetrical Nine-phase Machines by Means of Series Connection

Dutta, R.

Analysis and Comparison of Methods for Determining d- and q-axes Inductances of IPM Machines

Eastham, J.F.

Effect of Unbalanced Supply Conditions on the Performance of Induction Machines for Aerospace Applications

Edelson, J.S.

The Chorus Meshcon Solution for Starter-Generators

Eimller, T.

Developing a Brushless Permanent Magnet Synchronous Drive for a X-Ray Microscope Condenser in Ultra-High Vacuum

El-Antably, A.

Speed Sensor-less Control of Induction Machine Based on Carrier Signal Injection and Smooth-air-gap Induction Machine Model

EL-Refaie, A.M.

Scalability of Surface PM Machines with Concentrated Windings Designed to Achieve Wide Speed Ranges of Constant-Power Operation

Emadi, A.

A Novel Digital Control Technique for Brushless DC Motor Drives: Conduction-Angle Control A Novel Digital Control Technique for Brushless DC Motor Drives: Current Control Micromachines: Principles of Operation, Dynamics, and Control

Encica, L.

Space Mapping Optimization of a Cylindrical Voice Coil Actuator

Escarela, R.

A Time-Domain Rotating Machine Model for Switching Overvoltage Studies using Network Synthesis for the Winding Impedance

Everett, M.

Comparative Assessment of Ultra-capacitors and Advanced Battery Energy Storage Systems in PowerSplit Electronic-CVT Vehicle PowerTrains.

Fahimi, B.

Effects of High Frequency Excitation on the Behavior of a Switched Reluctance Machine on the Effect of Stator Excitation on Radial and Tangential Flux and Force Densities in a Permanent Magnet Synchronous Machine Optimal Excitation of Permanent Magnet Synchronous Machines via Direct Computation of Electromagnetic Force Components Operational Characteristics of Variable Capacitance Micromotor Drives: A Preliminary Investigation on Electromagnetic Response of the Field Oriented Linear Induction Motor Drives Elimination of Position and Current Sensors in High Performance Adjustable Speed AC Drives

Faiz, J.

A New Technique for Pulse-Width-Modulation using Direct Torque Control of a Virtual Motor

Familiant, Y.L.

AC Impedance Measurement Techniques

Faucher , J.

Mechanical Load Fault Detection in Induction Motors by Stator Current Time-Frequency Analysis

Ferreira Rodriguez, J.D.

Modeling of a Switched Reluctance Drive System for a 'Convoy Vehicle'

Fiedler, J.O.

Acoustic Noise in Switched Reluctance Drives: An Aerodynamic Problem?

Fierro, B.I.

Evaluation of a Re-Rated Induction Machine

Fikse, T.H.

Distributed Control of Hybrid Motor Drives Advanced Control of Cascaded Multilevel Drives Based on P-Q Theory

Flores Filho, A.F.

An Analytical Solution for the Normal Force in Linear Actuators

Flynn, M.M.

A Novel High-Speed Flywheel Based DC Voltage Source with Soft Handover Capability

Foggia, A.

Original 2D Cylindrical Harmonics Method for Identification of the Near Magnetic Stray Field of an Electrical Motor

Foglia, G.

Design and Operation Aspects of Field Regulated PM Synchronous Machines with Concentrated Armature Windings

Fonseca, D.S.B.

Linear Switched Reluctance Motor. A New Topology for Fault Tolerant Traction Applications

Forsyth, A.J.

Comparative Study of Stabilizing Controllers for Brushless DC Motor Drive Systems

Foucaut, A.

A Novel Linear Actuator using a Low Cost Stepper Motor with Integrated Stall Detection

Frachon, D.

A Novel Linear Actuator using a Low Cost Stepper Motor with Integrated Stall Detection

Franceschini, G.

Induction Drives Diagnosis by Signal Injection: Effectiveness and Severity Classification

Freitas, I.S.

Three-Phase to Three-Phase-Four-Wire Five-Leg Converters

Friedrich, G.

Integrated Starter Generator: Need of an Optimal Design and Control Approach. Application to a Permanent Magnet Machine

Friedriech, G.

Design Comparison of Two Rotating Electrical Machines for 42V Electric Power Steering

Fu, W.N.

Curvilinear Finite Elements for Modeling the Sliding Surface in Rotating Electrical Machines and its Applications

Fu, Z.

Real-Time Prediction of Torque Availability of an IPM Synchronous Machine Drive for Hybrid Electric Vehicles

Fuengwarodsakul, N.H.

Simplified Unbalanced Force Calculation in Switched Reluctance Machines Using Electromagnetic Circuit Model

Fujigaki, T.

Finite Element Analysis for Field Currents and Reactances of Doubly Fed Induction Generators for Wind Turbines

Fujino, C.

A High Precision Motor Design Method by Finite Element Analysis Considering Stress Distribution in Stator Core

Fujita, M.

Air-cooled Large Turbine Generator with Multiple-pitched Ventilation Ducts

Fukao, T.

An Improved Rotor Resistance Identification for Bearingless Induction Motors

Gabsi, M.

Homopolar and Bipolar Hybrid Excitation Synchronous Machines PZT Actuators for Active Compensation of S.R.M. Vibration: Open-loop Experimental Results

Galceran, S.

Low Cost Sensorless Control of Permanent Magnet Motors. An Overview and Evaluation.

Ganu, S.

Study of High Frequency Model of Permanent Magnet Motor

Gao, H.

Induction Motor Stator and Rotor Winding Temperature Estimation Using Signal Injection Method

Gao, Q.

Encoderless Operation of Induction Motor using a MRAS Observer with Zero Drift Feedback Integrator

Gao, Z.

A Robust Rotor Temperature Estimator for Induction Machines in the Face of Changing Cooling Conditions and Unbalanced Supply An Online Adaptive Stator Winding Temperature Estimator Based on a Hybrid Thermal Model for Induction Machines

Ge, H.J.

A Novel Discrete Control Technique of Matrix Converter for the Vector Control of Permanent Magnet Synchronous Motor

Gebhart, S.G.

Torque Ripple Tester for a Permanent Magnet Synchronous Motor

Geldhof, K.R.

A Nonlinear Model for Synchronous Machines to Describe High-Frequency Signal Based Position Estimators

Gerada, C.

Operating Induction Motor Drives with Turn-to-Turn Faults

Gieras, J.F.

Performance Characteristics of a Transverse Flux Generator

Giordano, V.

Application of Supervised and Unsupervised Neural Networks for Broken Rotor Bar Detection in Induction Motors

Giraud-Audine, C.

Design Procedure for Brushless PM Traction Machines for Electric Vehicle Applications

Giuliani, H.

Sensorless Control of Induction Machines by Combining Fundamental Wave Models with Transient Excitation Technique

Gomis, O.

Low Cost Sensorless Control of Permanent Magnet Motors. An Overview and Evaluation.

Gopakumar, K.

Three-Level Inverter Scheme with Common Mode Voltage Elimination and DC-Link Capacitor Voltage Balancing for an Open End Winding Induction Motor Drive A Self-adaptive Space Phasor Based Hysteresis Current Controller with Switching of Adjacent Inverter Voltage Vectors for Three-level Voltage Source Inverter Fed Induction Motor Drive

Grezzani, G.

Design Considerations on Fractional-Slot Fault-Tolerant Synchronous Motors

Gu, B.

Simplified Unbalanced Force Calculation in Switched Reluctance Machines Using Electromagnetic Circuit Model

Guardado, J.L.

A Time-Domain Rotating Machine Model for Switching Overvoltage Studies using Network Synthesis for the Winding Impedance

Guo, X.

High Power Interleaved Boost Converter in Fuel Cell Hybrid Electric Vehicle

Gupta, A.K.

A General Space Vector PWM Algorithm for Multilevel Inverters, Including Operation in Overmodulation Range

Guyomar, D.

PZT Actuators for Active Compensation of S.R.M. Vibration: Open-loop Experimental Results

Habetler, T.

A Survey of Efficiency Estimation Methods of In-Service Induction Motors with Considerations of Condition Monitoring Requirements The Effect of Induction Motor Rotor Eccentricity on Surge Test Data Separating Load Torque Oscillation and Rotor Fault Effects in Stator Current-Based Motor Condition Monitoring

Habetler, T.G.

Fault Signature Modeling and Detection of Inner Race Bearing Defects A Robust Rotor Temperature Estimator for Induction Machines in the Face of Changing Cooling Conditions and Unbalanced Supply An Online Adaptive Stator Winding Temperature Estimator Based on a Hybrid Thermal Model for Induction Machines Current/Voltage Based Detection of Faults in Gears Coupled to Electric Motors

Haji, M.

A New Method For Analysis of Rotor Broken Bar Fault in Induction Machines

Hall, R.

Design and Initial Testing of an Outer Rotating Segmented Rotor Switched Reluctance Machine for an Aeroengine Shaft-Line-Embedded Starter / Generator

Halvai Niasar, A.

Design Methodology of Drive Train for a Series-Parallel Hybrid Electric Vehicle (SPHEV) and its Power Flow Control Strategy

Ham, C.H.

Analysis and Test of a High-Speed Axial Flux Permanent Magnet Synchronous Motor Design of a Super-High Speed Permanent Magnet Synchronous Motor for Cryogenic Applications

Hameyer, K.

Multi-Physics Simulation of a Synchronous Claw-Pole Alternator for Automotive Applications Computation of the Mutual Inductance between Rotor and Stator of Synchronous Claw-Pole Alternators regarding Claw Chamfers

Han, T.

A New Condition Monitoring and Fault Diagnosis System of Induction Motors using Artificial Intelligent Algorithms

Harada, S.

Fretting Fatigue of Slot-dovetail in Turbo-generator Rotor Shaft

Harbaugh, M.

Saturation Modulation in Voltage Zero Sequence-Based Encoderless Techniques - Part II: Implementation Issues

Harke, M.C.

Fast and Smooth Initial Position and Magnet Polarity Estimation of Salient and Near Zero Saliency PM Synchronous Machines

Harley, R.

A Survey of Efficiency Estimation Methods of In-Service Induction Motors with Considerations of Condition Monitoring Requirements The Effect of Induction Motor Rotor Eccentricity on Surge Test Data Separating Load Torque Oscillation and Rotor Fault Effects in Stator Current-Based Motor Condition Monitoring

Harley, R.G.

Fault Signature Modeling and Detection of Inner Race Bearing Defects A Robust Rotor Temperature Estimator for Induction Machines in the Face of Changing Cooling Conditions and Unbalanced Supply An Online Adaptive Stator Winding Temperature Estimator Based on a Hybrid Thermal Model for Induction Machines Current/Voltage Based Detection of Faults in Gears Coupled to Electric Motors

Haumer, A.

Comparison of Two Rotor Temperature Estimation Models of a Surface Cooled Squirrel Cage Induction Machine

Hautier, J.-P.

Minimum Torque Ripple Control of Permanent Magnet Synchronous Motor in the Stationary Reference Frame

He, G.-G.

Cogging Force and its Estimation using a Neural Network Based on 2D Field Model of PMLSM

Hearn, C.

Transient 3-D Thermal Analysis for an Air-Cooled Induction Motor

Heideman, R.J.

Factors Affecting the Accurate Prediction of Iron Losses in Electrical Machines

Henao, H.

Design Comparison of Two Rotating Electrical Machines for 42V Electric Power Steering Broken Rotor Bars Fault Detection in Squirrel Cage Induction Machines

Hendershot, J.R.

A New Low-noise Two-phase Switched Reluctance Motor

Herbst, J.D.

Advanced Induction Motor Endring Design Features for High Speed Applications

Herzog, H.-G.

Developing a Brushless Permanent Magnet Synchronous Drive for a X-Ray Microscope Condenser in Ultra-High Vacuum

Herzog, H.G.

Passive Contactless Levitated Axial Flux Machine with Permanent Magnetic Disc Rotor for a Implantable Ventricular Assist Device

Hess, H.

The Modeling and Simulation of a Permanent Magnet Synchronous Motor with Direct Torque Control Based on MATLAB/SIMULINK

Hess, H.L.

Analysis of Synchronous Generator Internal Insulation Failures

Hinkkanen, M.

Sensorless Control of Induction Motor Drives Equipped with Inverter Output Filter

Hiramatsu, D.

A Study of Synchronous Machine Modeling about Synchronizing Phenomena

Hiraoka, S.

A Study of the Optimum Stator Winding Arrangement of LIM in Maglev Systems

Hirayama, K.

A Study of Synchronous Machine Modeling about Synchronizing Phenomena

Ho, S.L.

A Comparative Study of Kalman Filtering for Sensorless Control of a Permanent-Magnet Synchronous Motor Drive

Hoerz, M.

Passive Contactless Levitated Axial Flux Machine with Permanent Magnetic Disc Rotor for a Implantable Ventricular Assist Device

Hofmann, H.

Speed Sensor-less Control of Induction Machine Based on Carrier Signal Injection and Smooth-air-gap Induction Machine Model Ultrahigh Speed Permanent Magnet Motor/Generator for Aerospace Flywheel Energy Storage Applications

Hofmann, W.

Monitoring of the Transmission Properties of the Rotor Slip Ring System of Doubly-fed Induction Generators

Holme, M.

Sensorless Operation of a Permanent Magnet Generator for Aircraft

Homaifar, A.

A Fast Optimal Flux Search Controller with Improved Steady State Behavior for DTC Based Induction Motor Drives on the Performance of Optimal Flux Search Controller for DTC Based Induction Motor Drives

Homrich, R.P.

An Analytical Solution for the Normal Force in Linear Actuators

Hong, J.P.

Practical Analysis Method for Claw-pole type Generator using 2-Dimensional Equivalent model Application of Response Surface Methodology Combined with Experimental Design for Improving Torque Performance of Interior Permanent Magnet Synchronous Motor A Comparative Study of Switched Reluctance Motors with Conventional and Toroidal Windings Reduction of Torque Ripple in AC Motor Drives for Electric Power Steering

Hrz, M.

Developing a Brushless Permanent Magnet Synchronous Drive for a X-Ray Microscope Condenser in Ultra-High Vacuum

Hossain, S.H.

Torque Ripple Tester for a Permanent Magnet Synchronous Motor

Howe, D.

Synthesis of Cogging Torque Waveform from Analysis of a Single Stator Slot Predictive Current Control with Current Error Correction for PM Brushless AC Drives EKF-based Hybrid Controller for Permanent Magnet Brushless Motors Combining Hall Sensors and a FluxObserver-based Sensorless Technique A Linear Permanent Magnet Generator for a Free-Piston Energy Converter

Hu, J.

Sliding Mode Observer for Wide Speed Range Sensorless Induction Machine Drives: Considerations for Digital Implementation

Huang, J.

AC Impedance Measurement Techniques

Huang, X.

The Effect of Induction Motor Rotor Eccentricity on Surge Test Data

Hur, J.

Analytical Prediction and Reduction of the Cogging Torque in Interior Permanent Magnet Motor

Hur, Y.

Practical Analysis Method for Claw-pole type Generator using 2-Dimensional Equivalent model

Husain, I.

A Fourier Series Generalized Geometry Based Analytical Model of Switched Reluctance Machines

Hwang, Y.W.

A New Soft-Start Method with Abnormal Over Current Protection Function for Switching Power Supplies

Ide, K.

Finite Element Analysis for Field Currents and Reactances of Doubly Fed Induction Generators for Wind Turbines

Iizuka, M.

Finite Element Analysis for Field Currents and Reactances of Doubly Fed Induction Generators for Wind Turbines

Iles-Klumpner, D.

Advanced Optimization Design Techniques for Automotive Interior Permanent Magnet Synchronous Machines

Ionel, D.M.

Factors Affecting the Accurate Prediction of Iron Losses in Electrical Machines

Ionescu, B.

Advancements in Tools and Methods for the Design of Permanent Magnet Integrated Starter Alternators

Irudayaraj, S.

Micromachines: Principles of Operation, Dynamics, and Control

Islam, M.

Paralleling of Stator Coils in Permanent Magnet Machines

Ito, H.

Fretting Fatigue of Slot-dovetail in Turbo-generator Rotor Shaft

Jabbar, M.A.

Determination of Parameters for Internal Permanent Magnet Synchronous Motors Optimization of the Constant Power Speed Range of a Saturated Permanent Magnet Synchronous Motor Cogging Torque Prediction by Superposition of Torque due to Pole Transition over Slot Computational Optimization of the Run-up Performance of a HDD Spindle Motor

Jack, A.G.

A Prototype Electrical Actuator for Aircraft Flaps and Slats Axial Flux Motors Using Compacted Insulated Iron Powder and Laminations Design and Test Results The Design of Fault Tolerant Machines for Aerospace Applications Design and Initial Testing of an Outer Rotating Segmented Rotor Switched Reluctance Machine for an Aeroengine Shaft-Line-Embedded Starter / Generator

Jacobina, C.B.

Sensorless IFOC for Single-Phase Induction Motor Drive System Component Minimized AC-AC Single-Phase to Three-Phase-Four-Wire Converters Three-Phase to Three-Phase-Four-Wire Five-Leg Converters Five-Leg Converter Dual-Winding AC Drive Systems AC Drive Systems Using Four-Leg Converter with Maximum DC-Bus Voltage Utilization Reduced Switch Count Multi-Motor Drive Systems

Jahns, T.M.

Impact of Inductor Placement on the Performance of Adjustable Speed Drives Under Input Voltage Unbalance and Sag Conditions Scalability of Surface PM Machines with Concentrated Windings Designed to Achieve Wide Speed Ranges of Constant-Power Operation

Jain, A.

Study of New Stator Pole Geometry for improvement of SRM Torque Profile

Jang, S.M.

Electromagnetic Analysis of High Speed Machines with Diametrically Magnetized Rotor, Considering Slotting Effect and Applied to New Magnetization Modeling Dynamic Characteristic Analysis and Control Parameter Estimation of Tubular Type Moving-Magnet Linear Actuator with Halbach Array

Jansen, J.W.

Design and Test of a Ironless, Three Degree-of-freedom, Magnetically Levitated Linear Actuator with Moving Magnets

Jansen, R.H.

Design Aspects of a High Speed Permanent Magnet Synchronous Motor / Generator for Flywheel Applications

Jansson, P.

Vertical Electrical Motor using Soft Magnetic Composites

Jaramillo , G.A.

Development of a Solution for an Overheating Problem and Reactive Power Increase in the Three Generator Units of a Hydroelectric Power Plant

Jayabalan, R.

on Electromagnetic Response of the Field Oriented Linear Induction Motor Drives

Jayashankar, V.

On Minimizing the Fluctuations in the Power Generated from a Wave Energy Plant Energy Storage Considerations for a Stand-alone Wave Energy Plant

Jeong, S.K.

Robust Control against Rotor Resistance Variation for Speed Sensorless Induction Motors

Jewell, G.W.

Resistance Estimation for Temperature Determination in PMSMs through Signal Injection

Jiang, J.Z.

A New Transverse Flux Permanent Motor for Direct Drive Application

Jin, H.Y.

A Simple Neutral-point Voltage Balancing Control Method for Three-level NPC PWM VSI Inverters A High-Performance Five-Level Single-Phase Inverter Using Repetitive Control and State Feedback

Jindal, A.

Operational Characteristics of Variable Capacitance Micromotor Drives: A Preliminary Investigation

Johnson, B.K.

Analysis of Synchronous Generator Internal Insulation Failures

Jolly, L.

Optimization of the Constant Power Speed Range of a Saturated Permanent Magnet Synchronous Motor

Jones, M.

Independent Vector Control of Asymmetrical Nine-phase Machines by Means of Series Connection

Jose, P.

A Novel H Controller for Wind Turbine Application Operating in Weak Grids

Jufer, M.

Analytical Force Determination in an Electromagnetic Actuator

Jung, H.S.

Diminution of Current Measurement Error for Vector Controlled AC Motor Drives

Jurado, F.

Control System of Doubly Fed Induction Generators Based Wind Turbines with Production Limits

Kabata, Y.

Air-cooled Large Turbine Generator with Multiple-pitched Ventilation Ducts

Kaboli, S.

A Fast Optimal Flux Search Controller with Improved Steady State Behavior for DTC Based Induction Motor Drives on the Performance of Optimal Flux Search Controller for DTC Based Induction Motor Drives

Kakiuchi, M.

A Study of Synchronous Machine Modeling about Synchronizing Phenomena Air-cooled Large Turbine Generator with Multiple-pitched Ventilation Ducts

Kaluvagunta, D.

Effects of High Frequency Excitation on the Behavior of a Switched Reluctance Machine

Kanchan, R.S.

Three-Level Inverter Scheme with Common Mode Voltage Elimination and DC-Link Capacitor Voltage Balancing for an Open End Winding Induction Motor Drive A Self-adaptive Space Phasor Based Hysteresis Current Controller with Switching of Adjacent Inverter Voltage Vectors for Three-level Voltage Source Inverter Fed Induction Motor Drive

Kang, G.-H.

Analytical Prediction and Reduction of the Cogging Torque in Interior Permanent Magnet Motor

Kang, S.

Torque Analysis of Combined 2D FEM and Lumped Parameter Method for a Hybrid Stepping Motor

Kang, Y.

Parallel Operation System of High Frequency modularized UPS Based on Distributed Logic Control The Restrain of the Dead Time Effects in Parallel Inverters Genetic Algorithm Optimized Fuzzy Repetitive Controller for Low Cost UPS Inverter Applications

Kapat, J.

Analysis and Test of a High-Speed Axial Flux Permanent Magnet Synchronous Motor Design of a Super-High Speed Permanent Magnet Synchronous Motor for Cryogenic Applications

Kapeller, H.

Comparison of Two Rotor Temperature Estimation Models of a Surface Cooled Squirrel Cage Induction Machine

Kasper, K.A.

Acoustic Noise in Switched Reluctance Drives: An Aerodynamic Problem?

Kenny, B.H.

Design Aspects of a High Speed Permanent Magnet Synchronous Motor / Generator for Flywheel Applications

Kerszenbaum, N.S.

Comparison of the Vibration of 2-Pole and 4-Pole Cylindrical-rotor Alternators due to Shorted-turns in the Field Winding

Kestelyn, X.

Weighted Control of Traction Drives with Parallel-connected AC Machines Direct Torque Control of a Multi-phase Permanent Magnet Synchronous Motor Drive: Application to a Five-phase One

Khalil, A.

A Fourier Series Generalized Geometry Based Analytical Model of Switched Reluctance Machines

Khambadkone, A.M.

A General Space Vector PWM Algorithm for Multilevel Inverters, Including Operation in Overmodulation Range

Khan, M.A.

Design of a PM Wind Generator, Optimised for Energy Capture over a Wide Operating Range

Khersonsky, Y.

Power Density Optimization in High Fidelity Power Drive

Kiffer, B.

Low Cost Vector Control for Permanent-Magnet-Synchronmotor with only One DC-Link Current Sensor for Pumping Application

Kim, C.U.

Diminution of Current Measurement Error for Vector Controlled AC Motor Drives

Kim, I.S.

Modeling, Simulation and Analysis of a Homopolar Generator with Input Limiter

Kim, J.

A Low-Cost and Efficient Permanent Magnet Assisted Synchronous Reluctance Motor Drive Designs for a New, Quick-Response, Latching Electromagnetic Valve

Kim, J.M.

Extraction of Induction Motor Fault Characteristics in Frequency Domain and Fuzzy Entropy Diminution of Current Measurement Error for Vector Controlled AC Motor Drives

Kim, J.S.

Extraction of Induction Motor Fault Characteristics in Frequency Domain and Fuzzy Entropy

Kim, N.

Field Weakening Operation of High Torque Density Five-Phase Permanent Magnet Motor Drives

Kim, S.I.

Application of Response Surface Methodology Combined with Experimental Design for Improving Torque Performance of Interior Permanent Magnet Synchronous Motor

Kim, S.S.

Extraction of Induction Motor Fault Characteristics in Frequency Domain and Fuzzy Entropy

Kim, S.Y.

Concentric Winding BLDC Motor Design

Kim, T.H.

A Novel Internal Fault Analysis of a Brushless DC Motor Using Winding Function Theory

Kim, Y.K.

Application of Response Surface Methodology Combined with Experimental Design for Improving Torque Performance of Interior Permanent Magnet Synchronous Motor

Kimmich, R.

Performance of Motors with Die-cast Copper Rotors in Industrial and Agricultural Pumping Applications

Kinnunen, H.

Three-Phase Model for the Circuit Simulation of Common-Mode Phenomena and Shaft Voltages in AC Motor Drive Systems

Kiyoumarsi , A.

Optimal Shape Design of Interior Permanent-Magnet Synchronous Motor

Klempner, N.S.

Comparison of the Vibration of 2-Pole and 4-Pole Cylindrical-rotor Alternators due to Shorted-turns in the Field Winding

Kliman, G.B.

An on-line Technique for Monitoring the Insulation Condition of AC Machine Stator Windings

Knight, A.M.

A Review of Power Converter Topologies for Wind Generators Power Losses in Small Inverter-Fed Induction Motors

Koenig, A.C.

Measurement of Torque Ripple in Mass-Produced Switched-Reluctance Motor Drives

Koinuma, H.

Fretting Fatigue of Slot-dovetail in Turbo-generator Rotor Shaft

Kong, L.

High Power Interleaved Boost Converter in Fuel Cell Hybrid Electric Vehicle

Kontkanen, P.

Axial Flux Permanent Magnet Generator with Concentrated Winding for Small Wind Power Applications

Koyanagi , K.

A Study of Synchronous Machine Modeling about Synchronizing Phenomena

Kral, C.

Comparison of Two Rotor Temperature Estimation Models of a Surface Cooled Squirrel Cage Induction Machine

Krein, P.

Combined Inverter Design and Motor Selection to Meet 42V Automotive System Targets

Krein, P.T.

Development of a First-Principles Design Method for Electromechanical Systems and a Linear Induction Machine Evaluation of a Re-Rated Induction Machine

Krishnamurthy, M.

Effects of High Frequency Excitation on the Behavior of a Switched Reluctance Machine Operational Characteristics of Variable Capacitance Micromotor Drives: A Preliminary Investigation

Krishnan, R.

Design and Control of a Linear Propulsion System for an Elevator Using Linear Switched Reluctance Motor Drives

Krstic, S.

Design Considerations for Neutral Point Clamped Converters

Kwak, S.

A Current Source Inverter with Advanced External Circuit and Control Method

Kwasinski, A.

Combined Inverter Design and Motor Selection to Meet 42V Automotive System Targets

Kwon, C.

An On-line Rotor Resistance Estimator for Induction Machine Drives An Adaptive Maximum Torque Per Amp Control Strategy A Genetic Algorithm Based Induction Machine Characterization Procedure

Kwon, S.O.

Practical Analysis Method for Claw-pole type Generator using 2-Dimensional Equivalent model

Lahaie, S.

Auxiliary Voltage Sag Ride-Through System for Adjustable-Speed Drives

Lanfranchi, V.

Design Comparison of Two Rotating Electrical Machines for 42V Electric Power Steering

Lau, J.

Nonlinear Adaptive Position Control of an Interior Permanent Magnet Synchronous Motor

Law, J.D.

Analysis of Synchronous Generator Internal Insulation Failures

Lawler, J.S.

Impact of Continuous Conduction on the Constant Power Speed Range of the Switched Reluctance Motor

Lazzari, M.

Experimental High Frequency Parameter Identification of AC Electrical Motors

Le Floch, Y.

Two Techniques for Modeling an Induction Motor with Skewed Slots with a Time-Stepping 2D-3D Finite Element Method

Lcrivain, M.

Homopolar and Bipolar Hybrid Excitation Synchronous Machines PZT Actuators for Active Compensation of S.R.M. Vibration: Open-loop Experimental Results

Lee, B.K.

A Comparative Study of Switched Reluctance Motors with Conventional and Toroidal Windings

Lee, C.M.

Reduction of Torque Ripple in AC Motor Drives for Electric Power Steering

Lee, G.H.

Reduction of Torque Ripple in AC Motor Drives for Electric Power Steering

Lee, H.W.

A Novel Internal Fault Analysis of a Brushless DC Motor Using Winding Function Theory

Lee, J.J.

A Comparative Study of Switched Reluctance Motors with Conventional and Toroidal Windings

Lee, J.M.

A New Condition Monitoring and Fault Diagnosis System of Induction Motors using Artificial Intelligent Algorithms

Lee, J.Y.

Practical Analysis Method for Claw-pole type Generator using 2-Dimensional Equivalent model Application of Response Surface Methodology Combined with Experimental Design for Improving Torque Performance of Interior Permanent Magnet Synchronous Motor A Comparative Study of Switched Reluctance Motors with Conventional and Toroidal Windings Reduction of Torque Ripple in AC Motor Drives for Electric Power Steering

Lee, K.L.

Impact of Inductor Placement on the Performance of Adjustable Speed Drives Under Input Voltage Unbalance and Sag Conditions

Lee, S.B.

An on-line Technique for Monitoring the Insulation Condition of AC Machine Stator Windings Rapid Analytical Optimization of Eddy Current Shield Thickness for Associated Loss Minimization in Electrical Machines

Lee, S.H.

Extraction of Induction Motor Fault Characteristics in Frequency Domain and Fuzzy Entropy Dynamic Characteristic Analysis and Control Parameter Estimation of Tubular Type Moving-Magnet Linear Actuator with Halbach Array

Lee, Z.G.

Robust Control against Rotor Resistance Variation for Speed Sensorless Induction Motors

Lefeuvre, E.

PZT Actuators for Active Compensation of S.R.M. Vibration: Open-loop Experimental Results

Lelos, V.

Transient 3-D Thermal Analysis for an Air-Cooled Induction Motor Advanced Induction Motor Endring Design Features for High Speed Applications

Leonardi, F.

Advancements in Tools and Methods for the Design of Permanent Magnet Integrated Starter Alternators

Leong, C.Y.

Power Losses in Small Inverter-Fed Induction Motors

Lequesne, B.

Current/Voltage Based Detection of Faults in Gears Coupled to Electric Motors

Letelier, A.

Cogging Torque Reduction in an Axial Flux PM Machine with Extended Speed Range

Levi, E.

Independent Vector Control of Asymmetrical Nine-phase Machines by Means of Series Connection

Lewis, T.

Hybrid Electric Vehicle DC-Bus Traction Drive Harmonics

Li, H.M.

Condition Monitoring of Generator Stator Winding Inter-Turn Short Circuit Fault Based on Electrically Excited Vibration Dsp-based Field Oriented Control of PMSM using SVPWM in Radar Servo System

Li, J.

A New Efficiency Optimization Method on Vector Control of Induction Motors

Li, J.T.

Cogging Torque Prediction by Superposition of Torque due to Pole Transition over Slot

Li, L.

Parallel Operation System of High Frequency modularized UPS Based on Distributed Logic Control

Li, M.

Performance Control of PMSM Drives Using a Self-tuning PID

Li, W.C.

Hinfinity Control of Induction Motor with Efficiency Maximum for HEVs Adaptive Field-Oriented Control of Induction Motor for HEVs

Li, X.

Performance Analysis of a 3-Phase Induction Machine with Inclined Static Eccentricity

Li, Y.D.

Performance Control of PMSM Drives Using a Self-tuning PID

Li, Y.G.

Condition Monitoring of Generator Stator Winding Inter-Turn Short Circuit Fault Based on Electrically Excited Vibration Reluctance Network Model of Turbo-Generator and its Application in Rotor Winding Inter-Turn Short Circuit Fault

Lidozzi, A.

High Reliable Near-Zero Speed Control for Sinusoidal PMSM Drives with Low Resolution Position Sensors Synergetic Control of PMSM Drives for High Dynamic Applications

Lieu, D.

Torque Analysis of Combined 2D FEM and Lumped Parameter Method for a Hybrid Stepping Motor

Lieu, D.K.

Designs for a New, Quick-Response, Latching Electromagnetic Valve

Lim, H.S.

Design and Control of a Linear Propulsion System for an Elevator Using Linear Switched Reluctance Motor Drives

Lim, Y.S.

Practical Analysis Method for Claw-pole type Generator using 2-Dimensional Equivalent model

Lima, A.M.N.

Sensorless IFOC for Single-Phase Induction Motor Drive System Component Minimized AC-AC Single-Phase to Three-Phase-Four-Wire Converters Three-Phase to Three-Phase-Four-Wire Five-Leg Converters Five-Leg Converter Dual-Winding AC Drive Systems AC Drive Systems Using Four-Leg Converter with Maximum DC-Bus Voltage Utilization Reduced Switch Count Multi-Motor Drive Systems

Lin, C.-S.

A Novel High Frequency Induction Motor with Single-Phase Rotor Conductor and Position Sensor

Lin, D.

Curvilinear Finite Elements for Modeling the Sliding Surface in Rotating Electrical Machines and its Applications

Lin, L.

A Simple Neutral-point Voltage Balancing Control Method for Three-level NPC PWM VSI Inverters

Lipo, T.A.

Impact of Inductor Placement on the Performance of Adjustable Speed Drives Under Input Voltage Unbalance and Sag Conditions A New Trapezoidal Shaped-Pole Permanent Magnet Machine

Liu, B.Y.

Genetic Algorithm Optimized Fuzzy Repetitive Controller for Low Cost UPS Inverter Applications

Liu, C.-T.

Optimal Design of a Micro Axial Flux Switched-Reluctance Motor

Liu, H.

Transient 3-D Thermal Analysis for an Air-Cooled Induction Motor

Liu, J.

Sliding Mode Observer for Wide Speed Range Sensorless Induction Machine Drives: Considerations for Digital Implementation

Liu, Q.

Optimization of the Constant Power Speed Range of a Saturated Permanent Magnet Synchronous Motor

Liu, S.

A Novel Sensorless Control Strategy of Doubly-fed Induction Machines Stator Power Factor Adjustable Direct Torque Control of Doubly-Fed Induction Machines Study of High Frequency Model of Permanent Magnet Motor

Liu, T.H.

Position Control of a Sensorless Interior Permanent Magnet Synchronous Motor System

Liu, X.Y.

Comparative Study of Stabilizing Controllers for Brushless DC Motor Drive Systems

Liu, Z.

A Novel Sensorless Control Strategy of Doubly-fed Induction Machines Stator Power Factor Adjustable Direct Torque Control of Doubly-Fed Induction Machines Study of High Frequency Model of Permanent Magnet Motor

Liu, Z.H.J.

Determination of Parameters for Internal Permanent Magnet Synchronous Motors

Liu, Z.J.

Cogging Torque Prediction by Superposition of Torque due to Pole Transition over Slot Computational Optimization of the Run-up Performance of a HDD Spindle Motor

Lobo, N.S.

Design and Control of a Linear Propulsion System for an Elevator Using Linear Switched Reluctance Motor Drives

Lombard, P.

Two Techniques for Modeling an Induction Motor with Skewed Slots with a Time-Stepping 2D-3D Finite Element Method

Lomonova, E.A.

Design and Test of a Ironless, Three Degree-of-freedom, Magnetically Levitated Linear Actuator with Moving Magnets Space Mapping Optimization of a Cylindrical Voice Coil Actuator

Lpez Fernndez, X.M.

Thermal Behaviour of a Three-Phase Induction Motor Fed by a Fault Tolerant Voltage Source Inverter

Lorenz, R.D.

Fast and Smooth Initial Position and Magnet Polarity Estimation of Salient and Near Zero Saliency PM Synchronous Machines

Lorenzani, E.

Induction Drives Diagnosis by Signal Injection: Effectiveness and Severity Classification Time Harmonics Investigation of Stator and Rotor Currents of a Dedicated Induction Machine

Loriol, D.

Direct Torque Control of a Multi-phase Permanent Magnet Synchronous Motor Drive: Application to a Five-phase One

Lu, B.

A Survey of Efficiency Estimation Methods of In-Service Induction Motors with Considerations of Condition Monitoring Requirements

Lu, S.

Distributed Control of Hybrid Motor Drives Advanced Control of Cascaded Multilevel Drives Based on P-Q Theory

Lu, Z.

The Modeling and Simulation of a Permanent Magnet Synchronous Motor with Direct Torque Control Based on MATLAB/SIMULINK

Lugo, D.

A New Trapezoidal Shaped-Pole Permanent Magnet Machine

Luis Domingos, J.

A New Strategy for Differential Overvoltages and Common-Mode Currents Determination in PWM Induction Motor Drives

Luo, J.W.

A Novel Soft-Switching Converter for Switched Reluctance Motor: Analysis, Design and Experimental Results

Luomi, J.

Sensorless Control of Induction Motor Drives Equipped with Inverter Output Filter Three-Phase Model for the Circuit Simulation of Common-Mode Phenomena and Shaft Voltages in AC Motor Drive Systems Adaptive Observer Combined with HF Signal Injection for Sensorless Control of PMSM Drives Induction Motor Model for the Analysis of Capacitive and Induced Shaft Voltages

Ma, W.M.

Hinfinity Control of Induction Motor with Efficiency Maximum for HEVs Adaptive Field-Oriented Control of Induction Motor for HEVs

Machl, J.L.

Sensorless Control of Induction Machines by Combining Fundamental Wave Models with Transient Excitation Technique

Macret, P.

Integrated Starter Generator: Need of an Optimal Design and Control Approach. Application to a Permanent Magnet Machine

Madani, S.M.

A New Method For Analysis of Rotor Broken Bar Fault in Induction Machines A New Trapezoidal Shaped-Pole Permanent Magnet Machine

Mak, C.

Power Density Optimization in High Fidelity Power Drive

Makarovic, J.

Space Mapping Optimization of a Cylindrical Voice Coil Actuator

Maki-Ontto, P.

Three-Phase Model for the Circuit Simulation of Common-Mode Phenomena and Shaft Voltages in AC Motor Drive Systems Induction Motor Model for the Analysis of Capacitive and Induced Shaft Voltages

Malliband, P.D.

Power Losses in Small Inverter-Fed Induction Motors

Mantere, J.

High-Torque Low-Torque-Ripple Fractional-Slot PM-Motors Performance Comparison between Low-Speed Axial-Flux and Radial-Flux Permanent-Magnet Machines Including Mechanical Constraints

Marignetti, F.

A Fractional Slot Axial Flux PM Direct Drive A Tubular Generator for Marine Energy Direct Drive Applications

Markovic, M.

Analytical Force Determination in an Electromagnetic Actuator Round the World Flight with Solar Aircraft: Complex System Optimization Process Optimization of Electric Motor for a Solar Airplane Application

Markovic, M.M.

3D Inductance and Impedance Determination Taking Skin Effect into Account

Mason, G.

A Prototype Electrical Actuator for Aircraft Flaps and Slats

Matsuyama, K.

Fretting Fatigue of Slot-dovetail in Turbo-generator Rotor Shaft

Maughan, N.S.

Root-cause Diagnostics of Generator Service Failures

McCleer, P.J.

Comparative Assessment of Ultra-capacitors and Advanced Battery Energy Storage Systems in PowerSplit Electronic-CVT Vehicle PowerTrains.

McGilp, M.I.

Factors Affecting the Accurate Prediction of Iron Losses in Electrical Machines

McKeever, J.W.

Impact of Continuous Conduction on the Constant Power Speed Range of the Switched Reluctance Motor

McMahon, R.A.

Power Losses in Small Inverter-Fed Induction Motors

Mecrow, B.C.

A Prototype Electrical Actuator for Aircraft Flaps and Slats Axial Flux Motors Using Compacted Insulated Iron Powder and Laminations Design and Test Results The Design of Fault Tolerant Machines for Aerospace Applications Design and Initial Testing of an Outer Rotating Segmented Rotor Switched Reluctance Machine for an Aeroengine Shaft-Line-Embedded Starter / Generator

Melgoza, E.

A Time-Domain Rotating Machine Model for Switching Overvoltage Studies using Network Synthesis for the Winding Impedance

Melkebeek, J.A.A.

A Nonlinear Model for Synchronous Machines to Describe High-Frequency Signal Based Position Estimators

Mellor, P.H.

Optimisation of a Brushless Motor Excited by Multi-Polar Permanent Magnet Array Design Considerations for a Direct Drive Brushless PM Machine with Concentrated Windings Sensorless Operation of a Permanent Magnet Generator for Aircraft

Mendes, A.S.M.

Thermal Behaviour of a Three-Phase Induction Motor Fed by a Fault Tolerant Voltage Source Inverter

Mendler, N.

Passive Contactless Levitated Axial Flux Machine with Permanent Magnetic Disc Rotor for a Implantable Ventricular Assist Device

Merwerth, J.

Developing a Brushless Permanent Magnet Synchronous Drive for a X-Ray Microscope Condenser in Ultra-High Vacuum

Micallef, C.

Improvements in Air Flow in the End Region of a Large Totally Enclosed Fan Cooled Induction Motor

Mihet Popa, L.

Failure Detection in Converter Fed Induction Machines under Different Operation Conditions

Miller, J.M.

Comparative Assessment of Ultra-capacitors and Advanced Battery Energy Storage Systems in PowerSplit Electronic-CVT Vehicle PowerTrains.

Miller, T.J.E.

A New Low-noise Two-phase Switched Reluctance Motor Factors Affecting the Accurate Prediction of Iron Losses in Electrical Machines

MillsPrice, M.

Hybrid Electric Vehicle DC-Bus Traction Drive Harmonics

Mininger, X.

PZT Actuators for Active Compensation of S.R.M. Vibration: Open-loop Experimental Results

Mininno, E.

Application of Supervised and Unsupervised Neural Networks for Broken Rotor Bar Detection in Induction Motors

Mir, S.

Paralleling of Stator Coils in Permanent Magnet Machines

Mirafzal, B.

A Condition Monitoring Vector Database Approach for Broken Bar Fault Diagnostics of Induction Machines On Innovative Methods of Induction Motor Inter-Turn and Broken-Bar Fault Diagnostics

Miranda, R.S.

Five-Leg Converter Dual-Winding AC Drive Systems

Mishima, T.

A Study of the Optimum Stator Winding Arrangement of LIM in Maglev Systems

Mizutani, S.

Finite Element Analysis for Field Currents and Reactances of Doubly Fed Induction Generators for Wind Turbines

Moallem, M.

Optimal Shape Design of Interior Permanent-Magnet Synchronous Motor

Moghbelli, H.

Design Methodology of Drive Train for a Series-Parallel Hybrid Electric Vehicle (SPHEV) and its Power Flow Control Strategy

Mohammed, O.A.

A Novel Sensorless Control Strategy of Doubly-fed Induction Machines Stator Power Factor Adjustable Direct Torque Control of Doubly-Fed Induction Machines Study of High Frequency Model of Permanent Magnet Motor

Mohan, N.

A Novel H Controller for Wind Turbine Application Operating in Weak Grids Study of New Stator Pole Geometry for improvement of SRM Torque Profile

Montesinos, D.

Low Cost Sensorless Control of Permanent Magnet Motors. An Overview and Evaluation.

Morigo, D.

Detection of Bearing Faults in Cage Induction Motors Fed by Frequency Converter using Spectral Analysis of Line Current

Mota, R.

A Time-Domain Rotating Machine Model for Switching Overvoltage Studies using Network Synthesis for the Winding Impedance

Mthombeni, L.

Comparison of Lamination Iron Losses Supplied by PWM Voltages: US and European Experiences

Mthombeni, T.L.

A New Epstein Frame for Lamination Core Loss Measurements at High Frequencies and Flux Densities

Mu, X.H.

A Novel Discrete Control Technique of Matrix Converter for the Vector Control of Permanent Magnet Synchronous Motor

Mueller, M.A.

Design and Performance of a 20kW, 100rpm, Switched Reluctance Generator for a Direct Drive Wind Energy Converter

Muetze, A.

Calculation of Motor Capacitances for Prediction of Discharge Bearing Currents in Machines of Inverter-Based Drive System Calculation of the Influence of Insulated Bearings and Insulated Inner Bearing Seats on Circulating Bearing Currents in Machines of Inverter-Based Drive Systems Towards a Global Optimization of Electromechanical Energy Converters via Exploitation of Convex Characteristics

Murty, K.

Design of a Super-High Speed Permanent Magnet Synchronous Motor for Cryogenic Applications

Muthukumar, S.

On Minimizing the Fluctuations in the Power Generated from a Wave Energy Plant Energy Storage Considerations for a Stand-alone Wave Energy Plant

Nabeta, S.I.

Axial Flux Concentration Technique Applied to the Design of Permanent Magnet Motors: Theoretical Aspects and their Numerical and Experimental Validation

Nagano, S.

A Study of Synchronous Machine Modeling about Synchronizing Phenomena Air-cooled Large Turbine Generator with Multiple-pitched Ventilation Ducts

Nagasaka, K.

A Study of Synchronous Machine Modeling about Synchronizing Phenomena

Nagata, K.

Fretting Fatigue of Slot-dovetail in Turbo-generator Rotor Shaft

Nagorny, A.S.

Design Aspects of a High Speed Permanent Magnet Synchronous Motor / Generator for Flywheel Applications

Nahidmobarakeh, B.

Design Comparison of Two Rotating Electrical Machines for 42V Electric Power Steering

Nakano, M.

A High Precision Motor Design Method by Finite Element Analysis Considering Stress Distribution in Stator Core

Nam, G.Y.

Reduction of Torque Ripple in AC Motor Drives for Electric Power Steering

Nam, K.

Simplified Unbalanced Force Calculation in Switched Reluctance Machines Using Electromagnetic Circuit Model

Nam, K.H.

Concentric Winding BLDC Motor Design

Nandi, S.

Detection of Stator Faults in Induction Machines using Residual Saturation Harmonics Performance Analysis of a 3-Phase Induction Machine with Inclined Static Eccentricity

Nanga Ndjana, H.J.

Auxiliary Voltage Sag Ride-Through System for Adjustable-Speed Drives

Nardi, V.

Multi Drives Modulation Synchronization via Field-Bus VSI Parallel Operation for Active Filtering in High Power Drives

Nat-Sad, R.

Fuzzy Detection and Diagnosis of Fault Modes in a Voltage-Fed PWM Inverter Induction Motor

Nedeljkovic, D.

Predictive Torque Control of Induction Machines using Immediate Flux Control

Nemec, M.

Predictive Torque Control of Induction Machines using Immediate Flux Control

Ngandui, .

Auxiliary Voltage Sag Ride-Through System for Adjustable-Speed Drives

Niazi, P.

A Low-Cost and Efficient Permanent Magnet Assisted Synchronous Reluctance Motor Drive On-Line Parameter Estimation of Permanent Magnet Assisted Synchronous Reluctance Motor Drives

Nie, Z.L.

Hinfinity Control of Induction Motor with Efficiency Maximum for HEVs Adaptive Field-Oriented Control of Induction Motor for HEVs

Niemel, M.

High-Torque Low-Torque-Ripple Fractional-Slot PM-Motors Performance Comparison between Low-Speed Axial-Flux and Radial-Flux Permanent-Magnet Machines Including Mechanical Constraints

Nio, C.E.

A New Trapezoidal Shaped-Pole Permanent Magnet Machine

Nishihama, K.

Finite Element Analysis for Field Currents and Reactances of Doubly Fed Induction Generators for Wind Turbines

Nomura, T.

A Study of the Optimum Stator Winding Arrangement of LIM in Maglev Systems

Nord, G.

Vertical Electrical Motor using Soft Magnetic Composites Axial Flux Motors Using Compacted Insulated Iron Powder and Laminations Design and Test Results

Novotny, D.W.

Impact of Inductor Placement on the Performance of Adjustable Speed Drives Under Input Voltage Unbalance and Sag Conditions

Nuez, C.

Multi-motor Synchronization Technique applied in Traction Devices

O'Connell, T.C.

Development of a First-Principles Design Method for Electromechanical Systems and a Linear Induction Machine

Oh, Y.M.

Extraction of Induction Motor Fault Characteristics in Frequency Domain and Fuzzy Entropy

Ojo, O.

A Speed Control of an Interior Permanent Magnet Motor Drive Ensuring Minimum Electrical Loss Variable Frequency Control of an Induction Motor Drive with Reduced Switching Devices

Omekanda, A.

Robust Torque- and Torque-per-Inertia Optimization of a Switched Reluctance Motor using the Taguchi methods

Oslinger, J.L.

Development of a Solution for an Overheating Problem and Reactive Power Increase in the Three Generator Units of a Hydroelectric Power Plant Research of the Overheating in Three Synchronous Generators of 71,9 MVA.

Oswald, A.

Developing a Brushless Permanent Magnet Synchronous Drive for a X-Ray Microscope Condenser in Ultra-High Vacuum

Otaduy, P.J.

Impact of Continuous Conduction on the Constant Power Speed Range of the Switched Reluctance Motor

Ott, G.W.

Back EMF Calculations for Axial-Gap Permanent Magnet Synchronous Motors (AGPMSM) with Disc Magnets

Ozpineci, B.

Back EMF Calculations for Axial-Gap Permanent Magnet Synchronous Motors (AGPMSM) with Disc Magnets

Pacas, J.M.

Failure Detection in Converter Fed Induction Machines under Different Operation Conditions

Paes, R.

Field Oriented Control of a Synchronous Drive

Palacios, J.A.

Development of a Solution for an Overheating Problem and Reactive Power Increase in the Three Generator Units of a Hydroelectric Power Plant

Pang, D.-C.

Optimal Design of a Micro Axial Flux Switched-Reluctance Motor

Parsa, L.

Field Weakening Operation of High Torque Density Five-Phase Permanent Magnet Motor Drives

Parviainen, A.

Axial Flux Permanent Magnet Generator with Concentrated Winding for Small Wind Power Applications Performance Comparison between Low-Speed Axial-Flux and Radial-Flux Permanent-Magnet Machines Including Mechanical Constraints

Parvis, M.

Evaluation of the Radiation Thermal Resistance in Industrial Motors

Pascoli, G.

Comparison of Two Rotor Temperature Estimation Models of a Surface Cooled Squirrel Cage Induction Machine

Pastorelli, M.

Thermal Analysis of Induction and Synchronous Reluctance Motors

Paylan, A.

A Novel High-Speed Flywheel Based DC Voltage Source with Soft Handover Capability

Peirs, J.

Integrated Solution for Micro Power Generation

Pekarek, S.

on the Effect of Stator Excitation on Radial and Tangential Flux and Force Densities in a Permanent Magnet Synchronous Machine Optimal Excitation of Permanent Magnet Synchronous Machines via Direct Computation of Electromagnetic Force Components Elimination of Position and Current Sensors in High Performance Adjustable Speed AC Drives

Pekarek, S.D.

Measurement of Torque Ripple in Mass-Produced Switched-Reluctance Motor Drives

Pena-Eguiluz, R.

Weighted Control of Traction Drives with Parallel-connected AC Machines

Pengov, W.A.

A New Low-noise Two-phase Switched Reluctance Motor

Prez, M.

Detection of Bearing Faults in Cage Induction Motors Fed by Frequency Converter using Spectral Analysis of Line Current

Perez-Pinal, F.J.

Multi-motor Synchronization Technique applied in Traction Devices

Perini, R.

Double Fed Induction Machine Drive: Proposal of a Speed Sensorless Control Based on a MRAS. Design and Operation Aspects of Field Regulated PM Synchronous Machines with Concentrated Armature Windings Modelling and Test Validation of High Speed Universal Motors Fed via a Triac

Perriard, Y.

Analytical Force Determination in an Electromagnetic Actuator Round the World Flight with Solar Aircraft: Complex System Optimization Process Optimization of Electric Motor for a Solar Airplane Application

Perriard, Y.P.

3D Inductance and Impedance Determination Taking Skin Effect into Account

Peters, D.T.

Performance of Motors with Die-cast Copper Rotors in Industrial and Agricultural Pumping Applications

Petersen, C.C.

Vertical Electrical Motor using Soft Magnetic Composites

Petronio, P.V.J.

Control of Machine of Welding MIG using Controller Fuzzy

Phyu, H.N.

Computational Optimization of the Run-up Performance of a HDD Spindle Motor

Pickering, S.J.

Improvements in Air Flow in the End Region of a Large Totally Enclosed Fan Cooled Induction Motor

Pietrzak-David, M.

Weighted Control of Traction Drives with Parallel-connected AC Machines

Piippo, A.

Adaptive Observer Combined with HF Signal Injection for Sensorless Control of PMSM Drives

Pillay, P.

The Impact of Wavelet Selection on Transient Motor Current Signature Analysis A New Epstein Frame for Lamination Core Loss Measurements at High Frequencies and Flux Densities Comparison of Lamination Iron Losses Supplied by PWM Voltages: US and European Experiences Design of a PM Wind Generator, Optimised for Energy Capture over a Wide Operating Range

Pirker, F.

Comparison of Two Rotor Temperature Estimation Models of a Surface Cooled Squirrel Cage Induction Machine

Poh, C.Y.

The Effect of Inter-bar Currents in a PSC Motor

Polinder, H.

Comparison of Direct-Drive and Geared Generator Concepts for Wind Turbines

Popescu, M.

Factors Affecting the Accurate Prediction of Iron Losses in Electrical Machines

Pouramini, A.H.

A New Technique for Pulse-Width-Modulation using Direct Torque Control of a Virtual Motor

Povinelli, R.J.

A Condition Monitoring Vector Database Approach for Broken Bar Fault Diagnostics of Induction Machines

Pucci, M.

A New Direct Torque Control Strategy for the Minimization of Common-mode emissions

Pyrhnen, J.

High-Torque Low-Torque-Ripple Fractional-Slot PM-Motors Axial Flux Permanent Magnet Generator with Concentrated Winding for Small Wind Power Applications Performance Comparison between Low-Speed Axial-Flux and Radial-Flux Permanent-Magnet Machines Including Mechanical Constraints

Qiao, E.

High Power Interleaved Boost Converter in Fuel Cell Hybrid Electric Vehicle

Raca, D.

Fast and Smooth Initial Position and Magnet Polarity Estimation of Salient and Near Zero Saliency PM Synchronous Machines

Radun, A.

A Simplified Analytical Flux Model of Switched Reluctance Motor

Ragot, P.

Round the World Flight with Solar Aircraft: Complex System Optimization Process Optimization of Electric Motor for a Solar Airplane Application

Rahman, F.

Analysis and Design of a Novel Direct Flux Control Scheme for Induction Machine An Adaptive Sliding Stator Flux Observer for a Direct Torque Controlled IPM Motor Drive

Rahman, M.A.

An Improved Rotor Resistance Identification for Bearingless Induction Motors

Rahman, M.F.

Analysis and Comparison of Methods for Determining d- and q-axes Inductances of IPM Machines

Rahman, Z.

An Investigation of the Effect of Three-Dimensional Tooth Top Protrusions on Magnet Overhang in Radial Flux Motors

Rajagopalan, S.

Current/Voltage Based Detection of Faults in Gears Coupled to Electric Motors

Rathi, M.

A Novel H Controller for Wind Turbine Application Operating in Weak Grids

Ravenstahl, M.

Finite Element Eddy Current Computations in Turbogenerator Solid Rotors and Imperfect Stators

Renfrew, A.C.

Modeling of a Switched Reluctance Drive System for a 'Convoy Vehicle'

Rentschler , A.

Dynamic Simulation of Induction Machines Taken into Account Winding Distribution, Slotting and Saturation Effects

Rettler, R.E.

Finite Element Eddy Current Computations in Turbogenerator Solid Rotors and Imperfect Stators

Reynaerts, D.

Integrated Solution for Micro Power Generation

Rhinefrank, K.

Hybrid Electric Vehicle DC-Bus Traction Drive Harmonics

Richard, C.

PZT Actuators for Active Compensation of S.R.M. Vibration: Open-loop Experimental Results

Risticevic, M.

Advanced Optimization Design Techniques for Automotive Interior Permanent Magnet Synchronous Machines

Robinson, G.

Power Density Optimization in High Fidelity Power Drive

Rocha, N.

Five-Leg Converter Dual-Winding AC Drive Systems

Rodriguez, F.

A Novel Digital Control Technique for Brushless DC Motor Drives: Conduction-Angle Control

Roger, D.

On-line monitoring of Insulation Aging in AC Motors Fed by PWM Inverters

Rondot, E.

A Novel Linear Actuator using a Low Cost Stepper Motor with Integrated Stall Detection

Rosu, M.

Complete Nonlinear Magnetic-Thermal-Stress Design of Radial Field Multipole NdFeB Permanent Magnet Cylinder

Rouve, L.L.

Original 2D Cylindrical Harmonics Method for Identification of the Near Magnetic Stray Field of an Electrical Motor

Royak, S.

Saturation Modulation in Voltage Zero Sequence-Based Encoderless Techniques - Part II: Implementation Issues

Ruangsinchaiwanich, S.

Synthesis of Cogging Torque Waveform from Analysis of a Single Stator Slot

Ryu, Y.C.

A New Soft-Start Method with Abnormal Over Current Protection Function for Switching Power Supplies

Sadala, M.S.

Control of Machine of Welding MIG using Controller Fuzzy

Sadi-Haddad, L.

Two Techniques for Modeling an Induction Motor with Skewed Slots with a Time-Stepping 2D-3D Finite Element Method

Sagawa, T.

New Optimal Current Control Methods for Energy-Efficient and Wide Speed-Range Operation of Hybrid-Field Synchronous Motor

Salmasi, F.R.

Dual Estimators for Position and Current Sensorless SRM Drives Based on the Decomposed Model

Salminen, P.

High-Torque Low-Torque-Ripple Fractional-Slot PM-Motors

Salomki, J.

Sensorless Control of Induction Motor Drives Equipped with Inverter Output Filter

Salvatore, L.

Application of Supervised and Unsupervised Neural Networks for Broken Rotor Bar Detection in Induction Motors

Sandeep, K.

Energy Storage Considerations for a Stand-alone Wave Energy Plant On Minimizing the Fluctuations in the Power Generated from a Wave Energy Plant

Sanga, P.

The Design of Fault Tolerant Machines for Aerospace Applications

Santos Jr., E.C.

Component Minimized AC-AC Single-Phase to Three-Phase-Four-Wire Converters Reduced Switch Count Multi-Motor Drive Systems AC Drive Systems Using Four-Leg Converter with Maximum DC-Bus Voltage Utilization

Satoh, T.

A Study of Synchronous Machine Modeling about Synchronizing Phenomena

Sawata, T.

Sensorless Operation of a Permanent Magnet Generator for Aircraft

Scarano, M.

A Fractional Slot Axial Flux PM Direct Drive A Tubular Generator for Marine Energy Direct Drive Applications

Scarcella, G.

Saturation Modulation in Voltage Zero Sequence-Based Encoderless Techniques - Part I: Harmonic Analysis Saturation Modulation in Voltage Zero Sequence-Based Encoderless Techniques - Part II: Implementation Issues

Scelba, G.

Saturation Modulation in Voltage Zero Sequence-Based Encoderless Techniques - Part II: Implementation Issues

Schmerber, L.

Original 2D Cylindrical Harmonics Method for Identification of the Near Magnetic Stray Field of an Electrical Motor

Schmidt, E.

Influence of Higher Harmonics in the End Region Magnetic Field on Eddy Currents in the Stator Clamping System of Hydro Generators

Schofield, N.

Design Procedure for Brushless PM Traction Machines for Electric Vehicle Applications A H2 PEM Fuel Cell and High Energy Dense Battery Hybrid Energy Source for an Urban Electric Vehicle

Schroeder, S.

Simplified Unbalanced Force Calculation in Switched Reluctance Machines Using Electromagnetic Circuit Model

Schulte, S.

Multi-Physics Simulation of a Synchronous Claw-Pole Alternator for Automotive Applications Computation of the Mutual Inductance between Rotor and Stator of Synchronous Claw-Pole Alternators regarding Claw Chamfers

Schwery, A.

Influence of Higher Harmonics in the End Region Magnetic Field on Eddy Currents in the Stator Clamping System of Hydro Generators

Sebastian, T.

Paralleling of Stator Coils in Permanent Magnet Machines Current/Voltage Based Detection of Faults in Gears Coupled to Electric Motors

Semail, E.

Direct Torque Control of a Multi-phase Permanent Magnet Synchronous Motor Drive: Application to a Five-phase One

Seong, S.J.

Modeling, Simulation and Analysis of a Homopolar Generator with Input Limiter

Seto, Y.

Iron Loss Analysis of Interior Permanent Magnet Synchronous Motors -Variation of Main Loss Factors Due to Driving Condition

Sewell, C.

A Prototype Electrical Actuator for Aircraft Flaps and Slats

Shah, M.R.

Rapid Analytical Optimization of Eddy Current Shield Thickness for Associated Loss Minimization in Electrical Machines

Shan, H.

Parallel Operation System of High Frequency modularized UPS Based on Distributed Logic Control

Shao, B.

Cogging Force and its Estimation using a Neural Network Based on 2D Field Model of PMLSM

Sharma, N.

Design Considerations for Reactive Elements and Control Parameters for Three Phase Boost Rectifiers

Sheldon, S.

A Prototype Electrical Actuator for Aircraft Flaps and Slats

Sheng, H.

The Modeling and Simulation of a Permanent Magnet Synchronous Motor with Direct Torque Control Based on MATLAB/SIMULINK

Shi, B.

Design Considerations for Reactive Elements and Control Parameters for Three Phase Boost Rectifiers

Shi, J.L.

Position Control of a Sensorless Interior Permanent Magnet Synchronous Motor System

Shi, Y.F.

EKF-based Hybrid Controller for Permanent Magnet Brushless Motors Combining Hall Sensors and a FluxObserver-based Sensorless Technique

Shima, K.

Finite Element Analysis for Field Currents and Reactances of Doubly Fed Induction Generators for Wind Turbines

Shinnaka, S.

New Optimal Current Control Methods for Energy-Efficient and Wide Speed-Range Operation of Hybrid-Field Synchronous Motor New Dynamic Mathematical Model and New Dynamic Vector Simulators of Hybrid-Field Synchronous Motor

Shiomi, H.

Air-cooled Large Turbine Generator with Multiple-pitched Ventilation Ducts

Shoykhet, B.A.

Quench in High-Temperature Superconducting Motor Field Coils: Experimental Results

Sicard, P.

Auxiliary Voltage Sag Ride-Through System for Adjustable-Speed Drives Desensitization to Voltage Sags of a Rewinder by Using an Active Dancer Roll for Tension Control Accurate Adaptive Integration Algorithms for Induction Machine Drive over a Wide Speed Range Open-Loop Speed Estimator Design for Online Induction Machine Synchronous Speed tracking

Sienko, T.

Matrix Converter Control for High Speed Generators

Silva, E.R.C.

Three-Phase to Three-Phase-Four-Wire Five-Leg Converters AC Drive Systems Using Four-Leg Converter with Maximum DC-Bus Voltage Utilization

Silva, V.C.

Axial Flux Concentration Technique Applied to the Design of Permanent Magnet Motors: Theoretical Aspects and their Numerical and Experimental Validation

Simmons, K.

Improvements in Air Flow in the End Region of a Large Totally Enclosed Fan Cooled Induction Motor

Smith, D.

Torque Ripple Tester for a Permanent Magnet Synchronous Motor

Sobczyk, T.J.

Matrix Converter Control for High Speed Generators

Solero, L.

High Reliable Near-Zero Speed Control for Sinusoidal PMSM Drives with Low Resolution Position Sensors Synergetic Control of PMSM Drives for High Dynamic Applications

Soter, S.

Low Cost Vector Control for Permanent-Magnet-Synchronmotor with only One DC-Link Current Sensor for Pumping Application

Spiteri Staines, C.

Sensorless Speed, Position and Torque Control using AC Machine Saliencies Encoderless Operation of Induction Motor using a MRAS Observer with Zero Drift Feedback Integrator

Sriram, S.

On Minimizing the Fluctuations in the Power Generated from a Wave Energy Plant Energy Storage Considerations for a Stand-alone Wave Energy Plant

Stack, J.R.

Fault Signature Modeling and Detection of Inner Race Bearing Defects

Stanton, S.

Complete Nonlinear Magnetic-Thermal-Stress Design of Radial Field Multipole NdFeB Permanent Magnet Cylinder Curvilinear Finite Elements for Modeling the Sliding Surface in Rotating Electrical Machines and its Applications

Staton, D.

Thermal Analysis of Induction and Synchronous Reluctance Motors

Stefanini, I.S.

3D Inductance and Impedance Determination Taking Skin Effect into Account

Stevens, S.

Integrated Solution for Micro Power Generation

Stevens, S.S.

A Hybrid High speed Electrical Micromachine for Micro Scale Power Generation

Stevens, T.

Integrated Solution for Micro Power Generation

Stewart, P.J.

Resistance Estimation for Temperature Determination in PMSMs through Signal Injection

Strangas, E.G.

Failure Prognosis for Permanent Magnet AC Drives Based on Wavelet Analysis

Strnat, R.

A New Epstein Frame for Lamination Core Loss Measurements at High Frequencies and Flux Densities

Sudhoff, S.

An On-line Rotor Resistance Estimator for Induction Machine Drives IGBT and PN Junction Diode Loss Modeling for System Simulations A Genetic Algorithm Based Induction Machine Characterization Procedure Time-Domain Design of Motor Drive Current Regulators Using Genetic Algorithms

Sudhoff, S.D.

Genetic Algorithm Based Design of a Permanent Magnet Synchronous Machine

Sudri, A.

Low Cost Sensorless Control of Permanent Magnet Motors. An Overview and Evaluation.

Suhdoff, S.

An Adaptive Maximum Torque Per Amp Control Strategy

Sumner, M.

Operating Induction Motor Drives with Turn-to-Turn Faults Encoderless Operation of Induction Motor using a MRAS Observer with Zero Drift Feedback Integrator

Sun, P.W.

Dsp-based Field Oriented Control of PMSM using SVPWM in Radar Servo System

Sundaram, K.B.

Analysis and Test of a High-Speed Axial Flux Permanent Magnet Synchronous Motor Design of a Super-High Speed Permanent Magnet Synchronous Motor for Cryogenic Applications

Swales, S.

Switched Reluctance Machine Converter Design for ISA Applications from Engine Cranking Perspectives

Swinney, M.

IGBT and PN Junction Diode Loss Modeling for System Simulations Genetic Algorithm Based Design of a Permanent Magnet Synchronous Machine Time-Domain Design of Motor Drive Current Regulators Using Genetic Algorithms

Takahashi, S.

Fretting Fatigue of Slot-dovetail in Turbo-generator Rotor Shaft

Tamburrino, M.

Optimization of Power Flow Management in a Fuel-Cell Supplied Vehicle for Public City Transportation

Tani, Y.

A High Precision Motor Design Method by Finite Element Analysis Considering Stress Distribution in Stator Core

Tapia, J.A.

Cogging Torque Reduction in an Axial Flux PM Machine with Extended Speed Range

Tassoni, C.

Induction Drives Diagnosis by Signal Injection: Effectiveness and Severity Classification

Tavner, P.

Comparison of Direct-Drive and Geared Generator Concepts for Wind Turbines

Taylor, D.G.

Thermal Analysis of Linear Variable Reluctance Motor for Manufacturing Automation Applications Design of Linear Variable Reluctance Motor Using Computer-Aided Design Assistant

Teimor, M.

Switched Reluctance Machine Converter Design for ISA Applications from Engine Cranking Perspectives

Tekwani, P.N.

Three-Level Inverter Scheme with Common Mode Voltage Elimination and DC-Link Capacitor Voltage Balancing for an Open End Winding Induction Motor Drive A Self-adaptive Space Phasor Based Hysteresis Current Controller with Switching of Adjacent Inverter Voltage Vectors for Three-level Voltage Source Inverter Fed Induction Motor Drive

Teske, N.

Sensorless Speed, Position and Torque Control using AC Machine Saliencies

Testa, A.

Saturation Modulation in Voltage Zero Sequence-Based Encoderless Techniques - Part I: Harmonic Analysis

Thiffault, C.

Desensitization to Voltage Sags of a Rewinder by Using an Active Dancer Roll for Tension Control

Thornton, R.D.

Linear Synchronous Motor Design

Toide, Y.

A High Precision Motor Design Method by Finite Element Analysis Considering Stress Distribution in Stator Core

Tokumasu, T.

Air-cooled Large Turbine Generator with Multiple-pitched Ventilation Ducts

Tolbert, L.M.

An Online Rotor Time Constant Estimator for the Induction Machine

Toliyat, H.

A Low-Cost and Efficient Permanent Magnet Assisted Synchronous Reluctance Motor Drive On-Line Parameter Estimation of Permanent Magnet Assisted Synchronous Reluctance Motor Drives A Current Source Inverter with Advanced External Circuit and Control Method Field Weakening Operation of High Torque Density Five-Phase Permanent Magnet Motor Drives

Toliyat, H.A.

A Hybrid Converter for High Speed Operation of Switched Reluctance Motor Drives

Tomasso, G.

Multi Drives Modulation Synchronization via Field-Bus VSI Parallel Operation for Active Filtering in High Power Drives

Topor, M.

A Fractional Slot Axial Flux PM Direct Drive

Traxler-Samek, G.

Influence of Higher Harmonics in the End Region Magnetic Field on Eddy Currents in the Stator Clamping System of Hydro Generators

Tseng, K.J.

New Concept of Multi-Phase Inductively-Driven Shaft-less Centrifugal Pumps FEM Analyses for the Design and Modeling of a Novel Flywheel Energy Storage System Assisted by Integrated Magnetic Bearing

Ubaldini, M.

Design and Operation Aspects of Field Regulated PM Synchronous Machines with Concentrated Armature Windings

Uddin, M.

Nonlinear Adaptive Position Control of an Interior Permanent Magnet Synchronous Motor

Uemura, Y.

A Study of Synchronous Machine Modeling about Synchronizing Phenomena

Umans, S.D.

Quench in High-Temperature Superconducting Motor Field Coils: Experimental Results

Upshaw, J.

Advanced Induction Motor Endring Design Features for High Speed Applications

Vagati, A.

Thermal Analysis of Induction and Synchronous Reluctance Motors

Vahdati-Khajeh, E.

A Fast Optimal Flux Search Controller with Improved Steady State Behavior for DTC Based Induction Motor Drives on the Performance of Optimal Flux Search Controller for DTC Based Induction Motor Drives

Vahedi, A.

Design Methodology of Drive Train for a Series-Parallel Hybrid Electric Vehicle (SPHEV) and its Power Flow Control Strategy

Vaidya, J.

Analysis and Test of a High-Speed Axial Flux Permanent Magnet Synchronous Motor Design of a Super-High Speed Permanent Magnet Synchronous Motor for Cryogenic Applications

Valenzuela, M.A.

Cogging Torque Reduction in an Axial Flux PM Machine with Extended Speed Range

Vallan, A.

Evaluation of the Radiation Thermal Resistance in Industrial Motors

Van den Braembussche, R.

Integrated Solution for Micro Power Generation

van der Pijl, F.F.A.

Comparison of Direct-Drive and Geared Generator Concepts for Wind Turbines

van Essen, J.M.

Design and Test of a Ironless, Three Degree-of-freedom, Magnetically Levitated Linear Actuator with Moving Magnets

van Lierop, C.M.M.

Design and Test of a Ironless, Three Degree-of-freedom, Magnetically Levitated Linear Actuator with Moving Magnets

Vandenput, A.J.A.

Design and Test of a Ironless, Three Degree-of-freedom, Magnetically Levitated Linear Actuator with Moving Magnets Space Mapping Optimization of a Cylindrical Voice Coil Actuator

Vandevelde, L.

A Nonlinear Model for Synchronous Machines to Describe High-Frequency Signal Based Position Estimators

Vatter, R.

Developing a Brushless Permanent Magnet Synchronous Drive for a X-Ray Microscope Condenser in Ultra-High Vacuum

Venegas, V.

A Time-Domain Rotating Machine Model for Switching Overvoltage Studies using Network Synthesis for the Winding Impedance

Venkataramanan, G.

The Neutral Point Clamped Resonant DC Link Converter A New Three Level Soft Switched Topology Design Considerations for Reactive Elements and Control Parameters for Three Phase Boost Rectifiers

Verplaetsen, F.

Integrated Solution for Micro Power Generation

Vidal, P.E.

Weighted Control of Traction Drives with Parallel-connected AC Machines

Vido, L.

Homopolar and Bipolar Hybrid Excitation Synchronous Machines

Vitale, G.

A New Direct Torque Control Strategy for the Minimization of Common-mode emissions

von Jouanne, A.

Hybrid Electric Vehicle DC-Bus Traction Drive Harmonics

Vyncke, T.J.

A Nonlinear Model for Synchronous Machines to Describe High-Frequency Signal Based Position Estimators

Wallace, A.

Hybrid Electric Vehicle DC-Bus Traction Drive Harmonics

Wallace, I.T.

The Neutral Point Clamped Resonant DC Link Converter A New Three Level Soft Switched Topology

Wallace, R.

Cogging Torque Reduction in an Axial Flux PM Machine with Extended Speed Range

Wamkeue, R.W.

Two-Port Circuits Based Hybrid Model of Synchronous Machine

Wan, S.T.

Condition Monitoring of Generator Stator Winding Inter-Turn Short Circuit Fault Based on Electrically Excited Vibration Reluctance Network Model of Turbo-Generator and its Application in Rotor Winding Inter-Turn Short Circuit Fault

Wang, A.M.

Condition Monitoring of Generator Stator Winding Inter-Turn Short Circuit Fault Based on Electrically Excited Vibration Reluctance Network Model of Turbo-Generator and its Application in Rotor Winding Inter-Turn Short Circuit Fault Dsp-based Field Oriented Control of PMSM using SVPWM in Radar Servo System

Wang, C.Z.

A High-Performance Five-Level Single-Phase Inverter Using Repetitive Control and State Feedback

Wang, G.

Speed Sensor-less Control of Induction Machine Based on Carrier Signal Injection and Smooth-air-gap Induction Machine Model

Wang, H.

Elimination of Position and Current Sensors in High Performance Adjustable Speed AC Drives

Wang, J.

A Linear Permanent Magnet Generator for a Free-Piston Energy Converter

Wang, K.

An Online Rotor Time Constant Estimator for the Induction Machine

Wang, W.

Ultrahigh Speed Permanent Magnet Motor/Generator for Aerospace Flywheel Energy Storage Applications

Wang, W.M.

Concentric Winding BLDC Motor Design

Wang, Y.

Reluctance Network Model of Turbo-Generator and its Application in Rotor Winding Inter-Turn Short Circuit Fault

Wang, Y.I.

Dsp-based Field Oriented Control of PMSM using SVPWM in Radar Servo System

Wang, Z.

A Simple Neutral-point Voltage Balancing Control Method for Three-level NPC PWM VSI Inverters

Watanabe, Y.

Stray Load Loss Analysis of Cage Induction Motors Considering Inter-Bar Currents Using 3-D Finite Element Method

Waumans, T.

Integrated Solution for Micro Power Generation

Wegener, R.

Low Cost Vector Control for Permanent-Magnet-Synchronmotor with only One DC-Link Current Sensor for Pumping Application

Weigel, S.

Field Oriented Control of a Synchronous Drive

Weinger, A.

Field Oriented Control of a Synchronous Drive

Wen, X.

High Power Interleaved Boost Converter in Fuel Cell Hybrid Electric Vehicle

Wendling, P.

Two Techniques for Modeling an Induction Motor with Skewed Slots with a Time-Stepping 2D-3D Finite Element Method

Werynski, P.

On-line monitoring of Insulation Aging in AC Motors Fed by PWM Inverters

Wheeler, P.

Operating Induction Motor Drives with Turn-to-Turn Faults

Wiedenbrug, E.

The Effect of Induction Motor Rotor Eccentricity on Surge Test Data

Williamson, S.

Analysis of Multi-Phase Induction Machines with Winding Faults The Effect of Inter-bar Currents in a PSC Motor

Wilson, S.D.

Resistance Estimation for Temperature Determination in PMSMs through Signal Injection

Wipasuramonton, P.

Predictive Current Control with Current Error Correction for PM Brushless AC Drives

Woehrnschimmel, R.

Sensorless Control of Induction Machines by Combining Fundamental Wave Models with Transient Excitation Technique

Wolbank, T.M.

Sensorless Control of Induction Machines by Combining Fundamental Wave Models with Transient Excitation Technique

Wong, Y.K.

A Comparative Study of Kalman Filtering for Sensorless Control of a Permanent-Magnet Synchronous Motor Drive

Wrobel, R.

Optimisation of a Brushless Motor Excited by Multi-Polar Permanent Magnet Array Design Considerations for a Direct Drive Brushless PM Machine with Concentrated Windings

Wu, L.

Separating Load Torque Oscillation and Rotor Fault Effects in Stator Current-Based Motor Condition Monitoring

Wu, P.

New Concept of Multi-Phase Inductively-Driven Shaft-less Centrifugal Pumps FEM Analyses for the Design and Modeling of a Novel Flywheel Energy Storage System Assisted by Integrated Magnetic Bearing

Wu, T.X.

Analysis and Test of a High-Speed Axial Flux Permanent Magnet Synchronous Motor Design of a Super-High Speed Permanent Magnet Synchronous Motor for Cryogenic Applications

Wu, Y.

Induction Motor Stator and Rotor Winding Temperature Estimation Using Signal Injection Method

Wu, Z.

A Speed Control of an Interior Permanent Magnet Motor Drive Ensuring Minimum Electrical Loss Variable Frequency Control of an Induction Motor Drive with Reduced Switching Devices

Wu, Z.C.

Spectral Analysis of Novel Hybrid Modulated Asymmetric 5-level Inverter

Wuerfel, M.

Monitoring of the Transmission Properties of the Rotor Slip Ring System of Doubly-fed Induction Generators

Xiao, X.

Performance Control of PMSM Drives Using a Self-tuning PID

Xu, H.

High Power Interleaved Boost Converter in Fuel Cell Hybrid Electric Vehicle

Xu, L.

Sliding Mode Observer for Wide Speed Range Sensorless Induction Machine Drives: Considerations for Digital Implementation Development of Sensorless Vector Control for a PMSM Running up to 60,000 rpm A New Efficiency Optimization Method on Vector Control of Induction Motors

Xu, X.L.

A High-Performance Five-Level Single-Phase Inverter Using Repetitive Control and State Feedback

Xu, Z.

An Adaptive Sliding Stator Flux Observer for a Direct Torque Controlled IPM Motor Drive

Yamada, T.

Vertical Electrical Motor using Soft Magnetic Composites

Yamaguchi, S.

A High Precision Motor Design Method by Finite Element Analysis Considering Stress Distribution in Stator Core

Yamazaki, K.

Stray Load Loss Analysis of Cage Induction Motors Considering Inter-Bar Currents Using 3-D Finite Element Method Iron Loss Analysis of Interior Permanent Magnet Synchronous Motors -Variation of Main Loss Factors Due to Driving Condition

Yang, B.S.

A New Condition Monitoring and Fault Diagnosis System of Induction Motors using Artificial Intelligent Algorithms

Yang, H.S.

Electromagnetic Analysis of High Speed Machines with Diametrically Magnetized Rotor, Considering Slotting Effect and Applied to New Magnetization Modeling

Yap, H.T.

A H2 PEM Fuel Cell and High Energy Dense Battery Hybrid Energy Source for an Urban Electric Vehicle

Yazidi, A.

Broken Rotor Bars Fault Detection in Squirrel Cage Induction Machines

Yeh, C.-C.

A Condition Monitoring Vector Database Approach for Broken Bar Fault Diagnostics of Induction Machines

Yoon, J.S.

Robust Control against Rotor Resistance Variation for Speed Sensorless Induction Motors

Yoshioka, T.

A High Precision Motor Design Method by Finite Element Analysis Considering Stress Distribution in Stator Core

Yoshioka, Y.

Fretting Fatigue of Slot-dovetail in Turbo-generator Rotor Shaft

You, D.J.

Electromagnetic Analysis of High Speed Machines with Diametrically Magnetized Rotor, Considering Slotting Effect and Applied to New Magnetization Modeling

You, S.S.

Robust Control against Rotor Resistance Variation for Speed Sensorless Induction Motors

Younsi, K.

An on-line Technique for Monitoring the Insulation Condition of AC Machine Stator Windings

Zanardelli, W.G.

Failure Prognosis for Permanent Magnet AC Drives Based on Wavelet Analysis

Zeng, J.

Minimum Torque Ripple Control of Permanent Magnet Synchronous Motor in the Stationary Reference Frame

Zerbo, M.

Accurate Adaptive Integration Algorithms for Induction Machine Drive over a Wide Speed Range Open-Loop Speed Estimator Design for Online Induction Machine Synchronous Speed tracking

Zeroug, H.

Performance Analysis of Two BDCM Drives for Traction Applications

Zhan, Q.H.

A Novel Soft-Switching Converter for Switched Reluctance Motor: Analysis, Design and Experimental Results

Zhang, C.

New Concept of Multi-Phase Inductively-Driven Shaft-less Centrifugal Pumps FEM Analyses for the Design and Modeling of a Novel Flywheel Energy Storage System Assisted by Integrated Magnetic Bearing

Zhang, J.

Analysis and Design of a Novel Direct Flux Control Scheme for Induction Machine A Simplified Analytical Flux Model of Switched Reluctance Motor

Zhang, S.H.

A Novel Discrete Control Technique of Matrix Converter for the Vector Control of Permanent Magnet Synchronous Motor

Zhang, Y.

The Restrain of the Dead Time Effects in Parallel Inverters A High-Performance Five-Level Single-Phase Inverter Using Repetitive Control and State Feedback

Zhang, Z.

Curvilinear Finite Elements for Modeling the Sliding Surface in Rotating Electrical Machines and its Applications A New Efficiency Optimization Method on Vector Control of Induction Motors

Zhao, L.

Analysis and Test of a High-Speed Axial Flux Permanent Magnet Synchronous Motor Design of a Super-High Speed Permanent Magnet Synchronous Motor for Cryogenic Applications

Zheng, L.

Analysis and Test of a High-Speed Axial Flux Permanent Magnet Synchronous Motor Design of a Super-High Speed Permanent Magnet Synchronous Motor for Cryogenic Applications

Zhou, B.

A Novel Discrete Control Technique of Matrix Converter for the Vector Control of Permanent Magnet Synchronous Motor

Zhou, L.

Design of a Super-High Speed Permanent Magnet Synchronous Motor for Cryogenic Applications

Zhou, P.

Curvilinear Finite Elements for Modeling the Sliding Surface in Rotating Electrical Machines and its Applications

Zhu, W.

on the Effect of Stator Excitation on Radial and Tangential Flux and Force Densities in a Permanent Magnet Synchronous Machine Optimal Excitation of Permanent Magnet Synchronous Machines via Direct Computation of Electromagnetic Force Components

Zhu, Z.Q.

Synthesis of Cogging Torque Waveform from Analysis of a Single Stator Slot Predictive Current Control with Current Error Correction for PM Brushless AC Drives EKF-based Hybrid Controller for Permanent Magnet Brushless Motors Combining Hall Sensors and a FluxObserver-based Sensorless Technique

Zidani, F.

Fuzzy Detection and Diagnosis of Fault Modes in a Voltage-Fed PWM Inverter Induction Motor

Zolghadri, M.

A Fast Optimal Flux Search Controller with Improved Steady State Behavior for DTC Based Induction Motor Drives on the Performance of Optimal Flux Search Controller for DTC Based Induction Motor Drives

Zou, Y.P.

A Simple Neutral-point Voltage Balancing Control Method for Three-level NPC PWM VSI Inverters A High-Performance Five-Level Single-Phase Inverter Using Repetitive Control and State Feedback Spectral Analysis of Novel Hybrid Modulated Asymmetric 5-level Inverter

Zucca, M.

Time Harmonics Investigation of Stator and Rotor Currents of a Dedicated Induction Machine