Wireline core barrel NEW latching system

CAM LATCH SYSTEM

Patent pending.

A new industry standard Reliable, simple design

Sandviks wireline core barrel now features a direct mechanical cam latching system for increased productivity. Its simple design offers a reliable, easy loading, free falling alternative to current industry standards. RELIABLE direct mechanical advantage for smooth retrieval combines the best features of the spring latch and mechanical latching systems free falling less resistance (drag) in shallow angle holes independent latching action well-suited for tanged or non-tanged locking couplings compatible with variable wall drill rods SIMPLE field service friendly with three-piece design easy maintenance quick and easy loading with less rod box wear no preloading or use of loading sleeve required low cost conversion made easy refer to our conversion pages for details Contact your Sandvik representative today.

Robust, simple three-piece design

spring pin

spring pin

tanged locking coupling

latched

unlatched

latched unlatched

integrated spring

retraction case seated Integrated spring design actuates the latches

retraction case pulled back Mechanically unlatch the inner tube for hassel-free retrieval Independent latching action reduces mislatches

MKT0056/10-09 NB

SANDVIK MINING AND CONSTRUCTION

www.sandvik.com

N Wireline Core Barrel - Cam Latch System

Item Part No
1 2 3 4 5 6 31

N
Description Qty 1 1 1 1 1 1 2 1 2 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1-26 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 BB00001045 Head Assembly BA00000137 Spearhead Point BA00000179 Compression Spring BA00000161 Detent Plunger BA00000165 Coiled Spring Pin 7/16" x 1" BB00000146 Spearhead Base BB00000147 Latch Retracting Case BA00000159 Spring Pin 1/2" x 2" BB00000777 Latch Spring BB00000666 Latch BB00001059 Coiled Spring Pin 1/2" x 1-1/2" BB00000148 Upper Latch Body BB00000149 Landing Shoulder BA00000132 Stainless Steel Ball BA00000131 Bushing BB00000150 Lower Latch Body BA00000441 Nord-Lock Washer BA00000157 Lock Nut BA00000135 Spindle BA00000139 Shut Off Valve - Hard BA00000153 Valve Adjusting Washer BA00000163 Bearing BA00000146 Spindle Bushing BA00000164 Bearing BA00000123 Compression Spring BA00000158 Self Locking Nut BA00000314 Inner Tube Cap Assembly BA00000148 Inner Tube 1.5 m (5 ft) BA00000149 Inner Tube 3.0 m (10 ft) BA00000120 Stop Ring BA00000118 Core Lifter - Fluted BA00000154 Core Lifter Case BA00000156 Locking Coupling - Full Hole BA00000147 Adaptor Coupling BA00000121 Landing Ring BA00000126 Outer Tube 1.5 m (5 ft) BA00000127 Outer Tube 3.0 m (10 ft) BA00000122 Inner Tube Stabilizer BA00000268 Thread Protector

8 9 10 11 12 13 14 32

15 16 17 18 19 20 20 21 22 19

33

18 19 20 21 22

34

23 24 25 26 27

23 24 25

Inner Tube Components 27 28 29 30

26

Outer Tube Components

27 35

31 32 33 34

28 29 36

34 35 36

Patent Pending.

30

1-36

BB00001039

Core Barrel Kit, 3.0 m (10 ft)

NOTE: The head assembly is shipped assembled, all other components are shipped separately and will require assembly.

Sandvik recommends using only Sandvik quality manufactured parts. Sandvik does not guarantee the consistency or quality of other manufacturers. MKT0079 - NB 02/2010 REV1 SANDVIK MINING AND CONSTRUCTION www.miningandconstruction.sandvik.com

N2 Wireline Core Barrel - Cam Latch System

Item Part No
1 2 3 4 5 6 31

N2
Description Qty 1 1 1 1 1 1 2 1 2 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1-26 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 BB00001053 Head Assembly BA00000137 Spearhead Point BA00000179 Compression Spring BA00000161 Detent Plunger BA00000165 Coiled Spring Pin 7/16" x 1" BB00000146 Spearhead Base BB00000147 Latch Retracting Case BA00000159 Spring Pin 1/2" x 2" BB00000777 Latch Spring BB00000666 Latch BB00001059 Coiled Spring Pin 1/2" x 1-1/2" BB00000148 Upper Latch Body BB00000589 Landing Shoulder BA00000132 Stainless Steel Ball BA00000131 Bushing BB00000150 Lower Latch Body BA00000441 Nord-Lock Washer BA00000157 Lock Nut BA00000135 Spindle BA00000139 Shut Off Valve - Hard BA00000153 Valve Adjusting Washer BA00000163 Bearing BA00000146 Spindle Bushing BA00000164 Bearing BA00000123 Compression Spring BA00000158 Self Locking Nut BA00000321 Inner Tube Cap Assembly BA00000218 Inner Tube 1.5 m (5 ft) BA00000219 Inner Tube 3.0 m (10 ft) BA00000215 Stop Ring BA00000217 Core Lifter - Fluted BA00000216 Core Lifter Case BA00000156 Locking Coupling - Full Hole BA00000147 Adaptor Coupling BA00000221 Landing Ring BA00000126 Outer Tube 1.5 m (5 ft) BA00000127 Outer Tube 3.0 m (10 ft) BA00000140 Inner Tube Stabilizer BA00000268 Thread Protector

8 9 10 11 12 13 14 32

15 16 17 18 19 20 20 21 22 19

33

18 19 20 21 22

34

23 24 25 26 27

23 24

Inner Tube Components 27 28 29 30 31 32 33 34 34

36

25

26

Outer Tube Components

27 35

28 29

35 36

Patent Pending.

30

1-36

BB00001040

Core Barrel Kit, 3.0 m (10 ft)

NOTE: The head assembly is shipped assembled, all other components are shipped separately and will require assembly. Highlighted items are unique to the N2 wireline system - all other items are common with N wireline system.
Sandvik recommends using only Sandvik quality manufactured parts. Sandvik does not guarantee the consistency or quality of other manufacturers. MKT0079 - NB 02/2010 REV1 SANDVIK MINING AND CONSTRUCTION www.miningandconstruction.sandvik.com

N3 Triple Tube Wireline Core Barrel - Cam Latch System

27 1 2 3 4 5 6 7 36 29 28

N3
Description Qty 1 1 1 1 1 1 2 1 2 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Item Part No 1-26 1 2 3 4 5 6 7 8 9

37

BB00001045 Head Assembly BA00000137 Spearhead Point BA00000179 Compression Spring BA00000161 Detent Plunger BA00000165 Coiled Spring Pin 7/16" x 1" BB00000146 Spearhead Base BB00000147 Latch Retracting Case BA00000159 Spring Pin 1/2" x 2" BB00000777 Latch Spring BB00000666 Latch BB00001059 Coiled Spring Pin 1/2" x 1-1/2" BB00000148 Upper Latch Body BB00000149 Landing Shoulder BA00000132 Stainless Steel Ball BA00000131 Bushing BB00000150 Lower Latch Body BA00000441 Nord-Lock Washer BA00000157 Lock Nut BA00000135 Spindle BA00000139 Shut Off Valve - Hard BA00000153 Valve Adjusting Washer BA00000163 Bearing BA00000146 Spindle Bushing BA00000164 Bearing BA00000123 Compression Spring BA00000158 Self Locking Nut BA00000314 Inner Tube Cap Assembly BA00000197 O Ring BA00000198 Piston BA00000148 Inner Tube 1.5 m (5 ft) BA00000149 Inner Tube 3.0 m (10 ft) BA00000141 Split Tube 1.5 m (5 ft) BA00000142 Split Tube 3.0 m (10 ft) BA00000210 Stop Ring BA00000223 Core Lifter - Fluted BA00000222 Core Lifter Case BA00000382 Pump-Out Adapter BA00000386 Piston Plug BA00000156 Locking Coupling - Full Hole BA00000147 Adaptor Coupling BA00000121 Landing Ring BA00000126 Outer Tube 1.5 m (5 ft) BA00000127 Outer Tube 3.0 m (10 ft) BA00000122 Inner Tube Stabilizer BA00000268 Thread Protector

8 9 10 11 30 12 13 14 15 16 17 18 19 20 20 21 22 23 33 19 31 32 38

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

39

24 25 26 35 34

Inner Tube Components 27 28 29 29

40

30 30 31 32 33 34 35 36 37 38 39 39 40 41

41

Outer Tube Components

1-41

BB00001041

Core Barrel Kit, 3.0 m (10 ft)

NOTE: The head assembly is shipped assembled, all other components are shipped separately and will require assembly. Highlighted items are unique to the triple tube wireline system - all other items are common with the double tube. Items 34 and 35 only used when pumping out the core sample.

Patent Pending.

Sandvik recommends using only Sandvik quality manufactured parts. Sandvik does not guarantee the consistency or quality of other manufacturers. MKT0079 - NB 02/2010 REV1 SANDVIK MINING AND CONSTRUCTION www.miningandconstruction.sandvik.com

H Wireline Core Barrel - Cam Latch System

Item Part No
1 2 3 4 5 6 7 31

H
Description Qty 1 1 1 1 1 1 2 1 2 1 1 1 1 1 1 1 1 1 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1-26 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 BB00001190 Head Assembly BA00000137 Spearhead Point BA00000179 Compression Spring BA00000161 Detent Plunger BA00000165 Coiled Spring Pin 7/16" x 1" BB00001202 Spearhead Base BB00001189 Latch Retracting Case BA00000177 Spring Pin 1/2" x 2-3/4" BB00000777 Latch Spring BB00000667 Latch BB00001060 Coiled Spring Pin 1/2" x 2" BB00001185 Upper Latch Body BB00001212 Landing Shoulder BA00000132 Stainless Steel Ball BA00000131 Bushing BB00001191 Lower Latch Body BA00000332 Nord-Lock Washer BA00000194 Lock Nut BA00000196 Spindle BA00000181 Shut Off Valve - Hard BA00000171 Valve Adjusting Washer BA00000211 Bearing BA00000190 Spindle Bushing BA00000163 Bearing BA00000166 Compression Spring BA00000212 Self Locking Nut BA00000317 Inner Tube Cap Assembly BA00000174 Inner Tube 1.5 m (5 ft) BA00000175 Inner Tube 3.0 m (10 ft) BA00000185 Stop Ring BA00000186 Core Lifter - Fluted BA00000188 Core Lifter Case BA00000208 Locking Coupling - Full Hole BA00000195 Adaptor Coupling BA00000182 Landing Ring BA00000199 Outer Tube 1.5 m (5 ft) BA00000200 Outer Tube 3.0 m (10 ft) BA00000205 Inner Tube Stabilizer BA00000204 Thread Protector

8 9 10 11 12 13 14 15 16 17 18 20 20 21 22 34 23 24 25 19 19 33 32

18 19 20 21 22 23 24 25 26 27 27 28 29

Inner Tube Components

26

27

30 31 32 33 34

Outer Tube Components

35

28 29 36

34 35 36

Patent Pending.

30

1-36

BB00001042

Core Barrel Kit, 3.0 m (10 ft)

NOTE: The head assembly is shipped assembled, all other components are shipped separately and will require assembly.

Sandvik recommends using only Sandvik quality manufactured parts. Sandvik does not guarantee the consistency or quality of other manufacturers. MKT0057 - NB 02/2010 SANDVIK MINING AND CONSTRUCTION www.sandvik.com

H3 Triple Tube Wireline Core Barrel - Cam Latch System

27 1 2 3 4 5 6 7 36 29 28

H3
Description Qty 1 1 1 1 1 1 2 1 2 1 1 1 1 1 1 1 1 1 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Item Part No 1-26 1 2 3 4 5 6 7 8 9

37

BB00001190 Head Assembly BA00000137 Spearhead Point BA00000179 Compression Spring BA00000161 Detent Plunger BA00000165 Coiled Spring Pin 7/16" x 1" BB00001202 Spearhead Base BB00001189 Latch Retracting Case BA00000177 Spring Pin 1/2" x 2-3/4" BB00000777 Latch Spring BB00000667 Latch BB00001060 Coiled Spring Pin 1/2 x 2 BB00001185 Upper Latch Body BB00001212 Landing Shoulder BA00000132 Stainless Steel Ball BA00000131 Bushing BB00001191 Lower Latch Body BA00000332 Nord-Lock Washer BA00000194 Lock Nut BA00000196 Spindle BA00000181 Shut Off Valve - Hard BA00000171 Valve Adjusting Washer BA00000211 Bearing BA00000190 Spindle Bushing BA00000163 Bearing BA00000166 Compression Spring BA00000212 Self Locking Nut BA00000317 Inner Tube Cap Assembly BA00000225 O Ring BA00000224 Piston BA00000174 Inner Tube 1.5 m (5 ft) BA00000175 Inner Tube 3.0 m (10 ft) BA00000168 Split Tube 1.5 m (5 ft) BA00000169 Split Tube 3.0 m (10 ft) BA00000227 Stop Ring BA00000228 Core Lifter - Fluted BA00000226 Core Lifter Case BA00000385 Pump-Out Adapter BA00000386 Piston Plug BA00000208 Locking Coupling - Full Hole BA00000195 Adaptor Coupling BA00000182 Landing Ring BA00000199 Outer Tube 1.5 m (5 ft) BA00000200 Outer Tube 3.0 m (10 ft) BA00000205 Inner Tube Stabilizer BA00000204 Thread Protector

8 9 10 11 12 13 14 15 16 17 18 19 20 20 21 22 23 24 25 26 33 31 32 19 38 30

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

39

Inner Tube Components

34 35

27 28 29 29
40

30 30 31 32 33 34 35 36 37

41

Outer Tube Components

1-41

BB00001043

Core Barrel Kit, 3.0 m (10 ft)

38 39 39 40 41

NOTE: The head assembly is shipped assembled, all other components are shipped separately and will require assembly. Highlighted items are unique to the triple tube system - all other items are common with the double tube. Items 34 and 35 only used when pumping out the core sample.

Patent Pending.

Sandvik recommends using only Sandvik quality manufactured parts. Sandvik does not guarantee the consistency or quality of other manufacturers. MKT0057 - NB 02/2010 SANDVIK MINING AND CONSTRUCTION www.sandvik.com

Wireline core barrel Conversion kit

To have you up and running with the new industry standard, Sandvik has put together an all inclusive kit to ensure your conversion is made easy.

LINK LATCH TO CAM LATCH SYSTEM - N/N2/N3 Item Part No 1 2 3 4 5 6 7 Description Qty 1 2 1 2 1 1 1 BB00001032 Conversion Kit BB00000777 Latch Spring BB00000666 Latch BB00001059 Coiled Spring Pin 1/2" x 1-1/2" BA00000159 Spring Pin 1/2" x 2" BB00000234 Drift Pin (for Spring Pin) BB00000235 Drift Pin (for Coiled Spring Pin) BB00001031 Instruction Card (not shown)

Steps outlining the conversion from link latch to cam latch: 1. 2. 3. 4. 5. 6. Remove link latch components as indicated in green Reinstall the spearhead and retraction case components Place the latch spring in the spring pocket between the two latches Keeping these three items together, insert them into the upper latch body through the window in the retraction case Pull up the retraction case to install the new coiled spring pin Release the retraction case and fold in the latches to reinstall the spring pin

NOTE: It is recommend that while upgrading, the spring pin should be replaced with the coiled spring pin included in this kit (item #3). Recommended Tools: Hammer Rachet and 9/16 in socket (14 mm) 4 in (100 mm) socket extension Drift Tool

For detailed step by step instructions and your conversion kit, contact your Sandvik representative today.

Patent pending.

Sandvik recommends using only Sandvik quality manufactured parts. Sandvik does not guarantee the consistency or quality of other manufacturers. MKT0026 - NB 02/2010 SANDVIK MINING AND CONSTRUCTION www.sandvik.com

Wireline core barrel Conversion kit

To have you up and running with the new industry standard, Sandvik has put together an all inclusive kit to ensure your conversion is made easy.

LINK LATCH TO CAM LATCH SYSTEM - H/H3 Item Part No 1 2 3 4 5 6 7 Description Qty 1 2 1 2 1 1 1 BB00001194 Conversion Kit BB00000777 Latch Spring BB00000667 Latch BB00001060 Coiled Spring Pin 1/2" x 2" BA00000177 Spring Pin 1/2" x 2-3/4" BB00000234 Drift Pin (for Spring Pin) BB00000235 Drift Pin (for Coiled Spring Pin) BB00001031 Instruction Card (not shown)

Steps outlining the conversion from link latch to cam latch: 1. 2. 3. 4. 5. 6. Remove link latch components as indicated in green Reinstall the spearhead and retraction case components Place the latch spring in the spring pocket between the two latches Keeping these three items together, insert them into the upper latch body through the window in the retraction case Pull up the retraction case to install the new coiled spring pin Release the retraction case and fold in the latches to reinstall the spring pin

NOTE: It is recommend that while upgrading, the spring pin should be replaced with the coiled spring pin included in this kit (item #3). Recommended Tools: Hammer Rachet and 9/16 in socket (14 mm) 4 in (100 mm) socket extension Drift Tool

For detailed step by step instructions and your conversion kit, contact your Sandvik representative today.

Patent pending.

Sandvik recommends using only Sandvik quality manufactured parts. Sandvik does not guarantee the consistency or quality of other manufacturers. MKT0026 - NB 02/2010 SANDVIK MINING AND CONSTRUCTION www.sandvik.com

Wireline core barrel conversion assemblies

SPRING LATCH TO CAM LATCH SYSTEM - N/N3 Item Part No 1-15 1 2 3 4 5 6 7 8 9 Description Qty 1 1 1 1 1 1 2 1 2 1 1 1 1 1 1 BB00001072 Conversion Assembly BA00000137 Spearhead Point BA00000179 Compression Spring (not shown) BA00000161 Detent Plunger BA00000165 Coiled Spring Pin 7/16" x 1" BB00000146 Spearhead Base BB00000147 Latch Retracting Case BA00000159 Spring Pin 1/2" x 2" BB00000777 Latch Spring BB00000666 Latch BB00001059 Coiled Spring Pin 1/2" x 1-1/2" BB00000148 Upper Latch Body BB00000149 Landing Shoulder BA00000132 Stainless Steel Ball, 22 mm (not shown) BA00000131 Bushing (not shown) BB00000150 Lower Latch Body

3 4

8 9 10 11

10 11 12 13 14 15

12

SPRING LATCH TO CAM LATCH SYSTEM - N2 Item Part No 1-15 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Description Qty 1 1 1 1 1 1 2 1 2 1 1 1 1 1 1 BB00001073 Conversion Assembly BA00000137 Spearhead Point BA00000179 Compression Spring (not shown) BA00000161 Detent Plunger BA00000165 Coiled Spring Pin 7/16" x 1" BB00000146 Spearhead Base BB00000147 Latch Retracting Case BA00000159 Spring Pin 1/2" x 2" BB00000777 Latch Spring BB00000666 Latch BB00001059 Coiled Spring Pin 1/2" x 1-1/2" BB00000148 Upper Latch Body BB00000589 Landing Shoulder BA00000132 Stainless Steel Ball, 22 mm (not shown) BA00000131 Bushing (not shown) BB00000150 Lower Latch Body

15

NOTE: The only difference between these two kits is the landing shoulder (item #12). These conversion assemblies can be used to convert most competitor core barrels, including link latch. Contact your Sandvik representative today.

Patent pending.
Sandvik recommends using only Sandvik quality manufactured parts. Sandvik does not guarantee the consistency or quality of other manufacturers. MKT0026 - NB 04/2009 SANDVIK MINING AND CONSTRUCTION www.miningandconstruction.sandvik.com

1 2 3 4 5 6

Wireline core barrel Conversion assemblies

SPRING LATCH TO CAM LATCH SYSTEM - H/H3 Item Part No 1-15 1 2 3 4 Description Qty 1 1 1 1 1 1 2 1 2 1 1 1 1 1 1 BB00001195 Conversion Assembly BA00000137 Spearhead Point BA00000179 Compression Spring BA00000161 Detent Plunger BA00000165 Coiled Spring Pin 7/16" x 1" BB00001202 Spearhead Base BB00001189 Latch Retracting Case BA00000177 Spring Pin 1/2" x 2-3/4" BB00000777 Latch Spring BB00000667 Latch BB00001060 Coiled Spring Pin 1/2" x 2" BB00001185 Upper Latch Body BB00001212 Landing Shoulder BA00000132 Stainless Steel Ball, 22 mm (not shown) BA00000131 Bushing (not shown) BB00001191 Lower Latch Body

5 6 7 8 9 10 11 12 13 14 15

9 10 11

12

These conversion assemblies can be used to convert most competitor core barrels, including link latch. Contact your Sandvik representative today.

15

Patent pending.
Sandvik recommends using only Sandvik quality manufactured parts. Sandvik does not guarantee the consistency or quality of other manufacturers. MKT0026 - NB 02/2010 SANDVIK MINING AND CONSTRUCTION www.miningandconstruction.sandvik.com

N Wireline Core Barrel - Cam Latch System

Item Description
1

N BB00001028 BA00000137 BA00000179 BA00000161 BA00000165 BA00000159 BB00000777 BB00000666 BB00001059 BA00000132 BA00000131 BB00000149 BA00000441 BA00000157 BA00000139 BA00000163 BA00000146 BA00000164 BA00000158 BA00000134 BA00000120 BA00000118 BA00000154 BA00000121 BA00000122

N2 BB00001029 BA00000137 BA00000179 BA00000161 BA00000165 BA00000159 BB00000777 BB00000666 BB00001059 BA00000132 BA00000131 BB00000589 BA00000441 BA00000157 BA00000139 BA00000163 BA00000146 BA00000164 BA00000158 BA00000134 BA00000215 BA00000217 BA00000216 BA00000221 BA00000140

N3 BB00001030 BA00000137 BA00000179 BA00000161 BA00000165 BA00000159 BB00000777 BB00000666 BB00001059 BA00000132 BA00000131 BB00000149 BA00000441 BA00000157 BA00000139 BA00000163 BA00000146 BA00000164 BA00000158 BA00000134 BA00000197 BA00000210 BA00000223 BA00000222 BA00000121 BA00000122

Qty 1 2 1 2 4 2 4 4 1 4 2 1 1 4 2 1 2 2 2 5 5 20 5 2 4

Consumables Kit 1 Spearhead Point 2 Compression Spring

4

2 3 5 7 6 8 9 10 11 12 13 14 15

3 Detent Plunger 4 Coiled Spring Pin 5 Spring Pin 6 Latch Spring 7 Latch 8 Coiled Spring 9 Stainless Steel Ball 10 Bushing 11 Landing Shoulder 12 Nord-Lock Washer 13 Lock Nut 14 Shut Off Valve (Hard) 15 Thrust Bearing 16 Spindle Bushing 17 Thrust Bearing 18 Self Locking Nut 19 Hydraulic Grease Fitting 20 O Ring 21 Stop Ring 22 Core Lifter 23 Core Lifter Case 24 Landing Ring 25 Inner Tube Stabilizer

16

17 18 19 20 21 22

NOTE: Based on the average usage for 1000 m of drilling.

23

24

25

Sandvik recommends using only Sandvik quality manufactured parts. Sandvik does not guarantee the consistency or quality of other manufacturers. MKT0028 - NB 04/2009 SANDVIK MINING AND CONSTRUCTION www.sandvik.com

H Wireline Core Barrel - Cam Latch System

Item Description
1

H BB00001192 BA00000137 BA00000179 BA00000161 BA00000165 BA00000177 BB00000777 BB00000667 BB00001060 BA00000132 BA00000131 BB00001212 BA00000332 BA00000194 BA00000181 BA00000211 BA00000190 BA00000163 BA00000212 BA00000134 BA00000185 BA00000186 BA00000188 BA00000182 BA00000205

H3 BB00001193 BA00000137 BA00000179 BA00000161 BA00000165 BA00000177 BB00000777 BB00000667 BB00001060 BA00000132 BA00000131 BB00001212 BA00000332 BA00000194 BA00000181 BA00000211 BA00000190 BA00000163 BA00000212 BA00000134 BA00000227 BA00000228 BA00000226 BA00000182 BA00000205

Qty 1 2 1 2 4 2 4 4 1 4 2 1 1 4 2 1 2 2 2 5 20 5 2 4

Consumables Kit 1 Spearhead Point 2 Compression Spring

4

2 3 5 7 6 8 9 10 11 12 13 14 15

3 Detent Plunger 4 Coiled Spring Pin 5 Spring Pin 6 Latch Spring 7 Latch 8 Coiled Spring 9 Stainless Steel Ball 10 Bushing 11 Landing Shoulder 12 Nord-Lock Washer 13 Lock Nut 14 Shut Off Valve (Hard) 15 Thrust Bearing 16 Spindle Bushing 17 Thrust Bearing 18 Self Locking Nut 19 Hydraulic Grease Fitting 21 Stop Ring 22 Core Lifter 23 Core Lifter Case 24 Landing Ring 25 Inner Tube Stabilizer

16

17 18 19 20 21 22

NOTE: Based on the average usage for 1000 m of drilling.

23

24

25

Sandvik recommends using only Sandvik quality manufactured parts. Sandvik does not guarantee the consistency or quality of other manufacturers. MKT0028 - NB 02/2010 SANDVIK MINING AND CONSTRUCTION www.miningandconstruction.sandvik.com