SDH Digital Microwave Radio Transport Solution
SDH Digital Microwave Radio Transport Solution
Features Fully compliant STM/1 system for 6-23 GHz with 155 Mbps or 155 Mbps + 7E1 capacity. High Spectrum efficiency using 128QAM. Adaptive Transmit Power Control (ATPC) and low receiver threshold for maximum link performance, reliability and stability. STM-1 interface available as either electrical or optical. Automatic Gain Control (AGC) function to compensate IF cable length. Hot standby Tx protection switching with hitless Rx protection switching. Local management via CIT to facilitate commissioning. Equipment configuration stored onto flash memory (USB). NMS with integral routing and management of ODUs and remote IDUs. Built-in testing functions to facilitate commissioning and troubleshooting. Wide operating range on power supply. Compact and light weight for rapid and easy installation. Product Description Hiperion Digital Microwave Radio Link Systems allow transmission links to be established rapidly and easily to meet a variety of transmission needs, delivering cost savings and enabling rapid network rollout. The Hiperion GS155 SDH solution comprises of: antennas, outdoor units, indoor units and NMS. The Hiperion GS-155 SDH radio system is a full-featured 155Mbit/s transmission solution designed to seamlessly incorporate radio links into a fibre-based synchronous network. The Hiperion GS-155 SDH radio covers the full band of frequencies from 6 GHz to 38 GHz, and uses ASIC technology to achieve a high level of integration to provide low cost, high performance, and long term reliability that is unmatchable in the industry. The system features a fully compliant SDH regenerator and provides additional benefits including automatic protection switching, in-band management using the radio overhead, and tight
integration with existing SDH element management systems. The Hiperion GS-155 SDH radio system forms a cost effective, highly competitive STM-1 point-to-point microwave radio system meets current global carrier-grade standards for reliability, quality, and environmental compliance. The Hiperion GS-155 SDH IDU is available in two models: The STM/1 (155 Mbps), and the STM/1+ (155 Mbps + 7E1) which includes a 7E1 Add/Drop MUX. Common applications include access, backhaul and trunk infrastructure. Please contact us for exact and detailed product requirements for the application(s) concerned, and assistance in planning your link or network. All Hiperion Digital Microwave Radio Products conform to the relevant ITU, ETSI, FCC and ANSI standards, and are covered by a three-year warranty. Electrical System Frequency Range GHz 6GHz 7GHz 8GHz 11GHz 13GHz 15GHz 18GHz 23GHz
14. 17. 21.2 5.925- 7.10- 7.90- 10.67- 12.8050700-23 7. 110 7.90 8. 50 11.7 13.20 15.30 19.70 .60 F.3837 F.385- F.386- F.387 F.497- F.636- F.595- F.637(Lower) 7 6 -9 6 3 3 3 F.3847 (Upper) 128QAM 1010 1008 420 or or 1 or 12 490 008 32 27.5 28
252. 04 119, 490, ITU-R RF (Lower) 154 or MHz 126 or 500 Tx/Rx Spacing 350 161 311.32 or530 (Upper) RF Channel MHz 28 Bandwidth Tx power at Antenna port dBm 21 (2dB tolerance) Tx Power 0 to Control Range dBm +21 (1 dB step) Rx AGC dB > 60 Control Range Receive Sensitivity @ ddBm -6 8 BER = 1x10-6 (Guarantee Frequency ppm 2.5 Stability Residual BER < 1x10 Supported RF 1+0, 1+1 Configurations Radio Hot standby/ Space diversity Protection diversity
-13
266
19
18
17
0 to +19
0 to +18
0 to +17
-67
-6 6
/ Frequency
SDH Standards Compliance Line Rate SDH Aggregate SDH Termination SDH Protection
ITU-T G.703, G.825, G.957 Mbit/s 158 SFP Transceiver, Electrical or Optical S-1.1, L-1.1 Regenerator Section Termination STM-1 Port Protection 350 (up-conversion), 140 (downconversion)
IF Frequencies MHz
Frequency ppm 10 Stability Noise Figure dB < 5.5 < Power Supply VDC -20 to -60V 1+0 < 55 W 1+1 < 110 IF Connection N-type connector, Belden 9913/RG-8, up on ODU to 300m RSSI Connection on BNC ODU Remote IDU Out-of-band access Mechanical - ODU Dimensions (H mm 279 x 240 x92 x W x D) Weight kg 4.2 Operating C -33 to +55 Option -55 to +65 Temperature Operational Altitude Above m 4500 Mean Sea Level (ma Operating % <100 Humidity Electrical - IDU Payload Electrical (CC4), Optical (LC) Interface WSC Interface Mbit/s 2.048, G.703, E1, BNC WSC Interface ppm 50 Bit Deviation Async (<19.2kbit/s) / Sync (64kbit/s), RSAUX Interface -9 422 protocol, DB Voice EOW 4-wire, RJ-22 Interface USB USB 1.0 for flash storage only F-interface, VT-100, via local CIT RS-232, CIT DB-9 Q-interface, SNMP, Ethernet 10/100 BaseNMS T, RJ-45
o
6.5
Remote IDU Access Programmable User I/O Interface Front Panel LEDs Mechanical - IDU Dimensions for planning mm purposes (H x W x D) Weight for planning kg purposes Operational C Temperature Operational Altitude Above m Mean Sea Level (ma Operational Humidity % (max)
o
44 x 438 x 280
5 -5 to +55
4500