Red Text represents additions to ISO 9001:2008

ISO 9001:2008

ISO/TS 16949:2009
Introduction 0.1 General 0.2 Process approach 0.3 Relationship with ISO 9004 0.4 Compatibility with other management systems 0.5 Goal of this Technical Specification 1 Scope1 1.1 General1 1.2 Application 2 Normative references ISO 9000:2005 3 Terms and definitions 3.1 Terms and definitions for the automotive industry 3.1.1 Control Plan 3.1.2 Design Responsible Organization 3.1.3 Error Proofing 3.1.4 Laboratory 3.1.5 Laboratory Scope 3.1.6 Manufacturing 3.1.7 Predictive Maintenance 3.1.8 Preventive Maintenance 3.1.9 Premium Freight 3.1.10 Remote Location 3.1.11 Site 3.1.12 Special Characteristic 4 Quality management system 4.1 General requirements 4.1.1 General requirements Supplemental 4.2 Documentation requirements 4.2.1 General 4.2.2 Quality manual 4.2.3 Control of documents 4.2.3.1 Engineering specifications 4.2.4 Control of records 4.2.4.1 Records retention 5 Management responsibility 5.1 Management commitment 5.1.1 Process efficiency 5.2 Customer focus 5.3 Quality policy 5.4 Planning 5.4.1 Quality objectives 5.4.1.1 Quality objectives Supplemental 5.4.2 Quality management system planning 5.5 Responsibility, authority and communication 5.5.1 Responsibility and authority 5.5.1.1 Responsibility for quality 5.5.2 Management representative 5.5.2.1 Customer representative 5.5.3 Internal communication 5.6 Management review 5.6.1 General 5.6.1.1 Quality management system performance 5.6.2 Review input 5.6.2.1 Review input Supplemental 5.6.3 Review output 6 Resource management 6.1 Provision of resources 6.2 Human resources 6.2.1 General 6.2.2 Competence, training and awareness 6.2.2.1 Product design skills 6.2.2.2 Training 6.2.2.3 Training on the job 6.2.2.4 Employee motivation and empowerment 6.3 Infrastructure 6.3.1 Plant, facility and equipment planning 6.3.2 Contingency plans 6.4 Work environment 6.4.1 Personnel safety to achieve conformity to product requirements 6.4.2 Cleanliness of premises

1. SCOPE 1.1 General 1.2 Application 2 Normative references ISO 9000:2005 3 Terms and definitions

4 Quality management system 4.1 General requirements 4.2 Documentation requirements 4.2.1 General 4.2.2 Quality Manual 4.2.3 Control of Documents 4.2.4 Control of Records 5 MANAGEMENT RESPONSIBILITY 5.1 Management commitment 5.2 Customer focus 5.3 Quality policy 5.4 Planning 5.4.1 Quality Objectives 5.4.2 Quality Management System Planning 5.5 Responsibility, authority and communication 5.5.1 Responsibility and Authority 5.5.2 Management Representative 5.5.3 Internal Communication 5.6 Management Review 5.6.1 General 5.6.2 Review Input 5.6.3 Review Output 6 Resource management 6.1 Provision of resources 6.2 Human resources 6.2.1 General 6.2.2 Competence, Training and Awareness

6.3 Infrastructure

6.4 Work environment

Red Text represents additions to ISO 9001:2008

ISO 9001:2008
7 Product realization 7.1 Planning of product realization

ISO/TS 16949:2009
7 Product realization 7.1 Planning of product realization 7.1.1 Planning of product realization Supplemental 7.1.2 Acceptance criteria 7.1.3 Confidentiality 7.1.4 Change control 7.2 Customer-related processes 7.2.1 Determination of requirements related to the product 7.2.1.1 Customer-designated special characteristics 7.2.2 Review of requirements related to the product 7.2.2.1 Review of requirements related to the product Supplemental 7.2.2.2 Organization manufacturing feasibility 7.2.3 Customer communication 7.2.3.1 Customer communication Supplemental 7.3 Design and development 7.3.1 Design and development planning 7.3.1.1 Multidisciplinary approach 7.3.2 Design and development inputs 7.3.2.1 Product design input 7.3.2.2 Manufacturing process design input 7.3.2.3 Special characteristics 7.3.3 Design and development outputs 7.3.3.1 Product design outputs Supplemental 7.3.3.2 Manufacturing process design output 7.3.4 Design and development review 7.3.4.1 Monitoring 7.3.5 Design and development verification 7.3.6 Design and development validation 7.3.6.1 Design and development validation Supplemental 7.3.6.2 Prototype program 7.3.6.3 Product approval process 7.3.7 Control of design and development changes 7.4 Purchasing 7.4.1 Purchasing process 7.4.1.1 Statutory and regulatory conformity 7.4.1.2 Supplier quality management system development 7.4.1.3 Customer-approved sources 7.4.2 Purchasing information 7.4.3 Verification of purchased product 7.4.3.1 Incoming product conformity to requirements 7.4.3.2 Supplier monitoring 7.5 Production and service provision 7.5.1 Control of production and service provision 7.5.1.1 Control plan 7.5.1.2 Work instructions 7.5.1.3 Verification of job set-ups 7.5.1.4 Preventive and predictive maintenance 7.5.1.5 Management of production tooling 7.5.1.6 Production scheduling 7.5.1.7 Feedback of information from service 7.5.1.8 Service agreement with customer 7.5.2 Validation of processes for production and service provision 7.5.2.1 Validation of processes for production and service provision Supplemental 7.5.3 Identification and traceability 7.5.3.1 Identification and traceability Supplemental 7.5.4 Customer property 7.5.4.1 Customer-owned production tooling 7.5.5 Preservation of product 7.5.5.1 Storage and inventory 7.6 Control of monitoring and measuring equipment 7.6.1 Measurement system analysis 7.6.2 Calibration/verification records 7.6.3 Laboratory requirements 7.6.3.1 Internal laboratory 7.6.3.2 External laboratory

7.2 Customer-related processes 7.2.1 Determination of requirements related to the product 7.2.2 Review of requirements related to the product

7.2.3 Customer Communication 7.3 Design and development 7.3.1 Design and Development Planning 7.3.2 Design and Development Inputs

7.3.3 Design and Development Outputs

7.3.4 Design and Development Review 7.3.5 Design and Development Verification 7.3.6 Design and Development Validation

7.3.7 Control of Design and Development Changes 7.4 Purchasing 7.4.1 Purchasing Process

7.4.2 Purchasing Information 7.4.3 Verification of Purchased Product

7.5 Production and service provision 7.5.1 Control of Production and Service Provision

7.5.2 Validation of Processes for Production and Service Provision 7.5.3 Identification and Traceability 7.5.4 Customer Property 7.5.5 Preservation of Product 7.6 Control of monitoring and measuring Equipment

Red Text represents additions to ISO 9001:2008

ISO 9001:2008
8 Measurement, analysis and improvement 8.1 General

ISO/TS 16949:2009
8 Measurement, analysis and improvement 8.1 General 8.1.1 Identification of statistical tools 8.1.2 Knowledge of basic statistical concepts 8.2 Monitoring and measurement 8.2.1 Customer satisfaction 8.2.1.1 Customer satisfaction Supplemental 8.2.2 Internal audit 8.2.2.1 Quality management system audit 8.2.2.2 Manufacturing process audit 8.2.2.3 Product audit 8.2.2.4 Internal audit plans 8.2.2.5 Internal auditor qualification 8.2.3 Monitoring and measurement of processes 8.2.3.1 Monitoring and measurement of manufacturing processes 8.2.4 Monitoring and measurement of product 8.2.4.1 Layout inspection and functional testing 8.2.4.2 Appearance items 8.3 Control of nonconforming product 8.3.1 Control of nonconforming product Supplemental 8.3.2 Control of reworked product 8.3.3 Customer information 8.3.4 Customer waiver 8.4 Analysis of data 8.4.1 Analysis and use of data 8.5 Improvement 8.5.1 Continual improvement 8.5.1.1 Continual improvement of the organization 8.5.1.2 Manufacturing process improvement 8.5.2 Corrective action 8.5.2.1 Problem solving 8.5.2.2 Error-proofing 8.5.2.3 Corrective action impact 8.5.2.4 Rejected product test/analysis 8.5.3 Preventive action Annex A (normative) Control plan A.1 Phases of the control plan A.2 Elements of the control plan

8.2 Monitoring and measurement 8.2.1 Customer Satisfaction 8.2.2 Internal Audit

8.2.3 Monitoring and Measurement of Processes 8.2.4 Monitoring and Measurement of Product

8.3 Control of nonconforming product

8.4 Analysis of data 8.5 Improvement 8.5.1 Continual Improvement

8.5.2 Corrective Action

8.5.3 Preventive Action