COMPLETION PRODUCTS

PACKERS
SURSUFACE FLOW CONTROL SUBSURFACE SAFETY VALVES

SYSTEMS

HYDRAULIC PERMA-LACH PACKER

LITERATURE TOOL DEMO TOOL DEMO SIMULATOR LITE INTRODUCTION

AHR HYDRAULIC SET PACKER

LITERATURE TOOL DEMO SIMULATOR LITE INTRODUCTION

RH HYDRAULIC SET PACKER

LITERATURE TOOL DEMO SIMULATOR LITE INTRODUCTION

HYDRAULIC PERMA-SERIES
LITERATURE TOOL DEMO SIMULATOR LITE INTRODUCTION
MORE INTRODUCTION
For more information on Halliburton Products and Services visit our Home page at http://www.Halliburton.com

HYDRAULIC VERSA-TRIEVE PACKER

LITERATURE TOOL DEMO SIMULATOR LITE INTRODUCTION

WIRELINE PERMA-SERIES
LITERATURE TOOL DEMO SIMULATOR LITE INTRODUCTION

NON MANDREL MOVEMENT HYD PERMA-SERIES

LITERATURE TOOL DEMO SIMULATOR LITE INTRODUCTION

For more information on Halliburton Products and Services visit our Home page at http://www.Halliburton.com

Testing And Treating Single And Multiple Zone Production

HALLIBURTON

Saves when you buy it. Saves when you run it. Saves when you retrieve it. The hydraulic-set Perma-Lach packer.
Incorporating many features from the fieldproven Perma-Lach design, this hydraulic-set packer offers high performance at a low cost. For most sizes, it handles stimulation pressures to 10,000 psi and operating temperatures to 275 F. There are no hold-down buttons, so theres no chance for leakage around hold-down button O-rings. A simple change of packer elastomers equips the tool for H2S or higher temperature service. Setting and releasing is a study in simplicity. Run it in on tubing, drop a ball or set a slickline plug and apply pressure to set the packer. No tubing manipulation is required. To release, just pull straight up on production tubing. The tools small outer diameter speeds running in. Setting pressures can be field adjusted, allowing multiple packers to be run and set during a single trip. Further simplifying operations, tubing can be spaced out before the packer is set. With its low cost, simple operation and dependable performance, the hydraulic-set Perma-Lach packer will be a field favorite.

Release Mechanism
Proven Perma-Lach release mechanism.

Positive Seal
The outside elements in the triple-seal, multidurometer element package seal off high pressures while the softer inner element molds itself against casing irregularities for leak-proof performance.

Setting Pressures
Setting pressures can be field adjusted.

Secure Hold
Case-carburized slips bite into casing to prevent slippage in either direction. Consistent hardness across tooth section assures a reliable grip even after multiple sets.

Adjustable Shear Release

Easy to adjust shear release values to your completion requirements.

HYDRAULIC-SET PERMA-LACH PACKER

CN02524

The hydraulic-set Perma-Lach packer is versatile when it comes to completion designs. The field adjustable shear values for setting and releasing mean compatibility with a wide variety of equipment and completion procedures. This packer can be used as the lower packer in dual completions. For single string completions, an on-off tool allows the packer to act as a bridge plug for greater safety during tubing changeout. In multi-zone completions requiring a one-trip solution, the adjustable setting and releasing shear values make it simple to set the PermaLach packers in a predetermined sequence.
CN02522 CN02523

Single String Injection/Production

Single String Multi-Zone

Hydraulic-Set Perma-Lach Packer

CASING WEIGHT lb./ft
9.5 - 13.5 13 - 17 17 - 23 23 - 29

CASING SIZE in. (mm)

4.500 (114.30) 5.500 (139.70)

TUBING SIZE in. (mm)

2.375 (60.33) 2.375 (60.33) 2.375 (60.33) 2.875 (73.03) 3.500 (88.90) 2.875 (73.03) 3.500 (88.90) 2.875 (73.03) 3.500 (88.90) 3.500 (88.90) 4.500 (114.30) 3.500 (88.90) 4.500 (114.30)

PACKER OD in. (mm)

3.786 (96.16) 4.700 (119.38) 4.500 (114.30) 5.980 (151.89)/6.000 (152.40) 5.980 (151.89) 5.820 (147.83) 5.820 (147.83) 6.468 (164.29) 6.468 (164.29) 8.452 (214.68) 8.452 (214.68) 8.233 (209.12) 8.233 (209.12)

7.000 (177.80) 29 - 36
CN02521

7.625 (193.68)

29.7 - 39 40 -47

9.625 (244.48)

Dual String Multi-Zone Completion

47 - 53.5

The most important feature of the Hydraulic-Set Perma-Lach packer - the Halliburton specialist who can help you get full value from the tools high-performance features.

Sales of Halliburton products and services will be in accord solely with the terms and conditions contained in the contract between Halliburton and the customer that is applicable to the sale.

CPP5639.

1995 Halliburton Energy Services

Printed in U.S.A.

HALLIBURTON

AHC Hydraulic-Set Packer

This Large Bore Retrievable Packer Combines Permanent Packer Performance with Multiple Retrieval Options for a Total Completion Solution
Halliburtons new Hydraulic Set AHC Packer offers outstanding performance, reliability, and versatility. With this packer you get the performance and reliability of a permanent packer without the time-consuming and costly milling operations normally required to retrieve a permanent packer.
Can Be Configured with Ratch-Latch Head Or Premium Tubing Thread

Reliability and Versatility

The AHCs large inside diameter makes this packer ideal for a wide variety of completion applications. This unique design can be easily configured for monobore completions or into compact multi-bore designs capable of handling dual completions, electric cable, control line and instrument line feedthroughs. Even when configured for multi-bores, the sealing duties are handled by a reliable high performance concentric element package used in single bore applications. No mandrel movement during setting means that multiple AHC packers can be run together in a completion and set simultaneously or selectively. The packer s reliability is enhanced by having few elastomeric seals. The seals that are used are proven, performance tested and positioned to optimize protection of the well.

The Barrel Slip Provides High Load Capability Without Damaging Casing

Proven, Highly Reliable, Three-Piece, Multi-Durometer Element Package To Suit Medium To High Pressure And Temperature Environments Single-Piece Mandrel Eliminates The Need For O-Ring Seals Above The Elements

Retrieving Options - Straight-Shear, Chemical-Cut or Quick-Mill

The release options can be tailored to the completion requirements. If your completion requires a straight shear release packer, the adjustable Shear Release ring is used. For high pressures or high load capabilities, the adjustable Shear Release ring is replaced with a lock ring and the packer is released by chemically cutting the packer mandrel, then retrieving the packer with straight pull on the tubing. No components or metal cuttings are left in the well. In the event the packer must be milled, the slip is located at the top of the packer providing a very short milling distance to release.
CN03186

Setting Piston Below The Elements

Adjustable Start-To-Set Pressure Adjustable Shear Release

U.S. Pat. No. 5,117,906

Hydraulic-Set AHC Retrievable Packers

Releasing Procedures

Straight Shear ReleasingThe AHC packer is released by straight pull on the production tubing.

Chemical Cut ReleasingThe AHC packer is released by chemically cutting the packer mandrel in a predetermined location. This releases the packer so that the production tubing, packer, and tailpipe are pulled intact.

CN03206

Quick-Mill ReleaseThe AHC packer can be retrieved by milling only the external slip which is located at the top of the packer.

Casing Size Casing Weight Packer OD Packer ID

4 1/2 5 /2 7 7 5/8 9 /8
5 1

9.5-11.6 13-17 23-26 29-32 29-39 40-47 47-53

CN03188

3.83 4.72 6.10 5.95 6.44 8.47 8.30

1.885
CN03888 CN03889

2.990 3.950 3.880 3.880 4.95 4.875

No mandrel movement makes the AHC well suited for multi-packer completions

Unique single piece Large I.D. mandrel allows multifor big bore/mono-bore bore capabilities for dual bores, cable feed completions through, control lines, and instrument lines

The reliability, versatility, performance, and ease of service of the AHC packer makes it a prime candidate for consiedration in your completion needs. Contact your Halliburton representative - your Solution ConnectionSM. Visit our website at www.halliburton.com

Sales of Halliburton products and services will be in accord solely with the terms and conditions contained in the contract between Halliburton and the customer that is applicable to the sale.

H00657 9/97

1997 Halliburton Energy Services, Inc.

All Rights Reserved

CN03890

Printed in U.S.A.

Single Retrievable Completions

HALLIBURTON

Save valuable rig time with Halliburtons reliable RH packer

Many operators have saved a tremendous amount of rig time with Halliburtons proven RH packer a hydraulic-set system easily converted to selective set so the same packer can be used for single or multizone wells. It has safe, low-pressure setting requirements, but setting pressures can be easily varied in the field. In any case, the tree can be set and flanged up before setting as the packer does not require mandrel movement to set. A lower set of mechanical slips retains the packer against downward forces and an upper set of pressure-actuated button slips retains the packer in position against differential pressure from below. The more the differential pressure increases below the packer, the harder the Hold-down buttons bite into the casing. And when its time to release, no tubing rotation is required a simple, straight upward pull on the tubing is all thats needed. Fast, simple, straightforward it all adds up to one reliable, time-saving packer.

Sure Hold
Reliable casing bite in all grades including P110 and harder is provided with case-carburized slips. Contoured slips are designed to match the casing ID without belling. Easier packer release stems from the unique dovetail slip design.

Reliable
Durable tungsten-carbide disc inserts in the Hold-down buttons are protected from the casing wall as the packer is lowered into the well.

Positive Sealing
Triple-seal multidurometer element package contains two high durometer end elements. The middle element is softer to seal against casing irregularities and low pressures. End elements have molded, self-retracting springs.

RH PACKER

HN00012

Setting and Releasing Operations

The RH packer is designed to be set by pressuring up the tubing string against a plugging device below the packer. The RH packer has proven to be one of the industrys most reliable, retrievable packers.

Schematic 1: Running In A heavy duty guide at the lower

end of the packer serves as a gage ring.

Schematic 2: Setting After sealing the tubing by either

dropping a sealing ball or landing a plug in a nipple by wireline, pressure applied through the tubing initiates the setting.

Schematic 3: Releasing After pressure differential across

the packer is equalized, a straight upward pull on the tubing string shears the pins designed to release the packer. Large bypass areas in the RH packer aids in retrieving. Sealing ele-

RH Packer
CASING SIZE IN (mm) CASING WEIGHT LB/FT
9.5 - 13.5 4.500 (114.30) 10.5 - 11.6 11.6 - 15.1 11.5 - 13 5.000 (127,00) 15 - 18 18 - 23 5.500 (139,70) 6.000 (152,40) 6.625 (168,28) 13 - 17 17 - 23 20 - 26 17 - 24 24 - 32 17 - 23 20 - 26 23 - 26 7.000 (177,80) 23 - 29 29 - 32 29 - 35 38 - 40 7.625 (193,68) 24 - 29.7 29.7 - 39 24 - 32 32 - 40 36 - 40

PACKER OD IN (mm)
3.75 (95,25) 3.83 (97,28) 3.65 (92,71) 4.31 (109,47) 4.06 (103,12) 4.12 (104,65) 3.91 (99,31) 4.62 (117,35) 4.50 (114,30) 5.00 (127,00) 5.73 (145,54) 5.50 (139,70) 6.19 (157,23) 6.12 (155,45) 6.00 (152,40) 5.88 (149,35) 6.00 (152,40) 5.88 (149,35) 5.77 (146,56) 5.50 (139,70) 6.64 (168,66) 6.40 (162,56) 7.74 (196,60) 7.55 (191,77) 8.62 (218,95) 8.38 (212,85)

PACKER ID IN (mm)
1.62 (41,15) 1.92 (48,77) 1.53 (38,86) 1.94 (49,28) 1.53 (38,86) 1.94 (49,28) 1.91 (48,51) 1.94 (49,28) 1.94 (49,28) 1.92 (48,77) 2.78 (70,61) 2.38 (60,45) 2.38 (60,45) 2.37 (60,20) 2.89 (73,41) 2.38 (60,45) 2.78 (70,61) 2.88 (73,15) 2.38 (60,45) 2.38 (60,45) 2.91 (73,91) 2.89 (73,41) 2.78 (70,61) 2.90 (73,66) 3.00 (76,20) 2.34 (59,44) 3.00 (76,20) 4.73 (120,14) 2.34 (59,44) 3.00 (76,20) 4.73 (120,14) 4.73 (120,14) 4.73 (120,14) 5.00 (127,00)

ments reduce binding or swabbing problems.

Schematic 4: Selective setting A selective setting adapter

assembly is available, allowing any number of packers to be used in a single string. The adapter uses a sleeve and knock-out plug to seal off the pressure setting chamber of the packer. Packers are retrieved in the usual manner. Schematic 1: Running In Schematic 2: Setting Schematic 3: Releasing Schematic 4: Selective Setting

8.625 (219,08)

40 - 47 9.625 (244,48)

8.38 (212,85) 8.38 (212,85) 8.31 (211,07)

47 - 53.5

8.31 (211,07) 8.31 (211,07)

10.750 (273,05) 13.375 (339,73)

40.5 - 45.5 51 - 60.7 61 - 72

9.66 (245,36) 9.44 (239,78) 12.10 (307,34)

Halliburtons RH packer is the standard with a proven performance record. Let your Halliburton representative show you how an RH packer can help you save rig time.

Sales of Halliburton products and services will be in accord solely with the terms and conditions contained in the contract between Halliburton and the customer that is applicable to the sale.

CPP5616

1994 Halliburton Energy Services

Printed in U.S.A.

Permanent HP/HT Completions FracPac and Sand Control Services Highly-deviated and Horizontal Completions

HALLIBURTON

When rig time is a premium, the single-trip Hydraulic-Set, Perma-Series packer offers proven performance and economy
The Hydraulic-Set Perma-Series packer is a permanent drillable production packer that is the singletrip version of the proven Perma-Series packer equipped with a Ratch-Latch head. It is fast becoming a field favorite for highly deviated and/or single trip production and injection applications. It is especially well suited for offshore completions where economics require a single-trip packer.

One Piece Mandrel and Sealbore

eliminates a potential leak path.

Ratch-Latch Sealbore with Seal Anchor

provides high tensile strength and large bore through packer and seals.

Case-Carburized Slips
provide maximum casing contact with uniform slip penetration.

Leading-edge design features include a one-piece mandrel and seal bore that eliminates a potential leak path. Also, the low profile means greater running clearances to help reduce problems that may occur when running in highly deviated and horizontal wells. All premium, metal-to-metal thread connections add to the dependability of the packer.

Metal-To-Metal Backup Shoes

offer a 360 casing wall contact that prevents seal element extrusion.

Setting Piston O-Rings

standard design consists of two Aflas O-rings with PEEK backups, and two Viton O-rings with PEEK backups. This combination provides the downhole condition resistance of the Aflas sealing compound with the cold temperature surface testing integrity of the Viton compound.

Triple Seal Multidurometer Element Package

is a geometric design to seal effectively at high or low temperatures or pressures; available in 325F, 400F and 450F temperature ratings.

Important cost savings are built into the design of the Hydraulic-Set Perma-Series packer, especially when well conditions require exotic materials for the mandrel. A special short head version of the packer means less exotic material is needed and that reduces the cost.

Bottom Sub and Piston Housing

made of a single piece, eliminating a potential O-ring leak path.

Metal-To-Metal
premium thread connections on the packer, seal anchor and Ratch-Latch assembly.

HN00205

HYDRAULIC-SET PERMA-SERIES PACKERS

The Hydraulic-Set Perma-Series packer has proven to be very easy to use in flanged-up completions common in offshore operations. It sets with low pressure, all components are rotationally locked, and materials are suitable for milling. No tubing manipulation is required to set the packer and the HydraulicSet Perma-Series packer is compatible with standard Halliburton accessory equipment.

HN00206

Lower Seal Bore (short) Ratch-Latch Head (Most Economical Design)

Upper Seal Bore Ratch-Latch Head (Largest Bore)

Metal-To-Metal Back-Off Sub Head

(optional relatch capability shown)

Hydraulic-Set Perma-Series Packer

CASING SIZE CASING WEIGHT PACKER OD PACKER SEALING BORE PACKER AND SEAL UPPER SEAL BORE ASSEMBLY MINIMUM ID* LOWER SEAL BORE

PACKER AND SEAL ASSEMBLY MINIMUM ID*

5.000 5.500 6.625 7.000

7.625

9.625

10.750

15-21 13-20 20-23 17-32 17-20 17-23 17-20 23-32 23-38 32-44 26.4-39 33.7-45.3 33.7-47.1 36-59.4 40-47 53.5 55.5-60.7

3.96 4.54 4.45 5.468 5.875 6.18 6.25 5.875 5.687 5.468 6.375 6.25 6.18 8.125 8.42 8.31 9.28

3.12 3.5 3.5 4.25 5 4.25 5 4.25 4.25 4.25 5 5 4.25 6.5 7 7.25 7

1.91 2.36 2.36 3.17 3.875 3.17 3.875 3.17 3.17 3.17 3.875 3.875 3.17 4.85 6 6.023 6

2.375 2.375 3.25 4 3.25 4 3.25 3.25 3.25 4 4 3.25 5 6 6 6

1.735 1.735 2.35 2.875 2.35 2.875 2.35 2.35 2.35 2.875 2.875 2.35 3.875 4.85 4.85 4.85

* minimum IDs may vary depending on tubing thread connection

Other sizes available on request.

Sales of Halliburton products and services will be in accord solely with the terms and conditions contained in the contract between Halliburton and the customer that is applicable to the sale.

CPP5619

1995 Halliburton Energy Services

Printed in U.S.A.

Permanent Permanent HP/HT Horizontal Completions

HALLIBURTON

A variety of options in one high-performance production packer the Perma-Series packer

Single or multiple zone completions are served by one of the most advanced permanent packers available in the industry the

Flexible
Multiple receiving heads and bottom sub arrangements provide the flexibility to adapt the PermaSeries packer to your particular completion needs.

Optional Receiving Head Arrangements

hydraulic-set on the workstring, this tool leaves the packer bore free of all setting devices and provides a large production conduit through the packer. The packers contoured C-slip design provides maximum casing contact with uniform slip engagement. Case carburized slips also provide controlled hardness depth and maximum hardness across the tooth section. Should milling become necessary, upper packer components are locked and made of millable materials for fast removal, saving rig time.

Reliable
High or low temperatures, high or low pressures, the triple-seal multidurometer element package provides an effective seal. The metal-to-metal backup shoes provide full 360o casing wall contact. The unique design helps compensate for casing irregularities, preventing seal element extrusion.

Lug-Style Lug-Style Ratch-Latch receiving receiving receiving head for head with head for high vertical scoop guide tensile wells for deviated strength or maximum wells flow capability

HP/HT Capable
A fully engineered HP/HT element system is available for applications of up to 15,000 psi differential pressure at 450oF.

Optional Bottom Sub Arrangements

Dependable
Plain bottom sub for sump packer applications Sealbore extension thread for additional seal surface Tubing or millout extension thread for tailpipe accessories Small running O.D. and internal C-ring slip help prevent upward movement of wedge and a unique C-ring external slip design provides added resistance to presets.
CN01682 CN01685

PERMA-SERIES PACKERS

CN01683

CN01684

Perma-Series packers. Electric-wireline set or

Perma-Series Packer Standard Applications

Perma-Series packers are most often used when 1) high formation, unloading differential or stimulation pressures are anticipated, 2) the tubing needs to be pulled without unseating the packer, 3) high bottomhole temperatures are expected, 4) downhole conditions demand special running clearances.

Perma-Series packers are ideal for high flow rate, permanent production applications; HP/HT completion needs, and to serve as an integral sump packer for either conventional or FracPac sand control completions.

SLIP AND ELEMENT PACKAGE SHOWN IN SET POSITION

Schematic 1: Serving as a temporary bridge plug, tubing anchor or test packer.

Schematic 2: Isolating multi-zone completions.

Schematic 3: Permitting tubing movement and deploying tubing conveyed perforating guns.

Perma-Series Packer
CASING SIZE IN (mm) CASING WEIGHT (LB/FT) 9.5 - 12.6 9.5 - 13.5 13.5 - 15.1 13.5 - 15.1 15 - 21 15 - 21 23.2 - 24.2 13 - 20 13 - 20 20 - 26 20 - 26 20 - 26 17 - 32 17 - 32 20 - 24 17 - 20 17 - 23 20 - 26 23 - 38 23 - 38 23 - 38 26 - 32 26 - 32 32 - 38 32 - 44 32 - 44 26.4 - 33.7 26.4 - 33.7 26.4 - 33.7 33.7 - 39 33.7 - 39 36 - 47 36 - 59.4 36 - 59.4 36 - 59.4 36 - 59.4 40 - 53.5 PACKER OD IN 3.790 3.720 3.600 3.640 3.960 3.960 3.790 4.540 4.540 4.360 4.360 4.360 5.468 5.468 5.687 6.250 6.180 6.000 5.687 5.687 5.687 5.875 5.875 5.687 5.468 5.468 6.375 6.375 6.375 6.180 6.250 8.420 8.120 8.120 8.120 8.120 8.220 (mm) (96,27) (94,49) (91,44) (92,46) (100,58) (100,58) (96,27) (115,32) (115,32) (110,74) (110,74) (110,74) (138,89) (138,89) (144,45) (158,75) (156,97) (152,40) (144,45) (144,45) (144,45) (149,23) (149,23) (144,45) (138,89) (138,89) (161,93) (161,93) (161,93) (156,97) (158,75) (213,87) (206,25) (206,25) (206,25) (206,25) (208,79) SEAL BORE ID IN 2.555 2.375 2.375 2.555 2.555 3.120 2.555 2.750 3.000 2.750 3.000 3.500 2.750 3.250 4.000 4.000 3.250 4.000 2.750 3.250 4.250 4.000 5.000 4.000 2.750 3.250 2.750 3.250 4.000 3.250 4.000 6.000 3.250 4.000 5.000 6.500 6.000 (mm) (64,90) (60,33) (60,33) (64,90) (64,90) (79,25) (64,90) (69,85) (76,20) (69,85) (76,20) (88,90) (69,85) (82,55) (101,60) (101,60) (82,55) (101,60) (69,85) (82,55) (107,95) (101,60) (127,00) (101,60) (69,85) (82,55) (69,85) (82,55) (101,60) (82,55) (101,60) (152,40) (82,55) (101,60) (127,00) (165,10) (152,40) SEAL UNIT ID IN 1.677 1.530 1.530 1.677 1.677 2.390 1.677 1.830 1.927 1.830 1.927 2.510 1.830 2.350 2.970 2.970 2.350 2.970 1.830 2.350 3.250 2.970 3.938 2.970 1.830 2.350 1.830 2.350 2.970 2.350 2.970 4.400 2.350 2.970 3.850 5.000 4.400 (mm) (42,60) (38,86) (38,86) (42.60) (42,60) (60,71) (42,60) (46,48) (48,95) (46,48) (48,95) (63,75) (46,48) (59,69) (75,44) (75,44) (59,69) (75,44) (46,48) (59,69) (82,55) (75,44) (100,03) (75,44) (46,48) (59,69) (46,48) (59,69) (75,44) (59,69) (75,44) (111,76) (59,69) (75,44) (97,79) (127,00) (111,76) 1 2 1 1 1 1 3 1 3 1

4.500 (114,30)

5.000 (127,00)

5.500 (139,70)

6.625 (168,28)

1 1

7.000 (177,80)

7.625 (193,68)

9.625 (244,48)

(1) 1.92 ID Available (2) 1.73 ID Available (3) 2.33 ID Available (4) 4.86 ID Available Other sizes available upon request

See why Halliburtons Perma-Series packers have become a worldwide favorite. Your Halliburton representative will help you choose the one thats right for you.

Sales of Halliburton products and services will be in accord solely with the terms and conditions contained in the contract between Halliburton and the customer that is applicable to the sale. H01107 8/98 1998 Halliburton Energy Services Inc. All Rights Reserved Printed in U.S.A.

HN00127

CN01686

Deviated or horizontal completions Tubing conveyed perforating (TCP) Stimulation and FracPacsm service

HALLIBURTON

The Hydraulic-Set Versa-Trieve packers unique anti-preset mechanism system helps eliminate the problems that can be encountered when running a packer in horizontal and highly deviated wells. The hydraulic setting piston is isolated from unexpected load forces that may accidently set the packer.

Seal Anchor Threaded and Pinned to Prevent Backoff

Move this packer until its in the right place!

Anti-preset mechanism helps ensure that the packer does not set until the setting piston moves. No tubing rotation is necessary during setting or retrieving.

The Hydraulic-Set Versa-Trieve packer brings real value to conventional wells too. The singletrip capabilities of this packer make it ideal for use with Halliburtons VannSystem tubing-conveyed perforating guns. And, since the packer is mechanically held in the set position, it is ideally suited for stimulation operations where tubing contraction and mechanical shock loads may release a straight pull-to-release packer.

Anti-Rotation Lug Locks Exterior Components to Facilitate Milling

Designs available to meet all environments.

Triple-seal, multidurometer packer element seals against high and low pressure and against casing irregularities. Metallurgy of standard packer is for H2S service. Exotic metals and elastomers are available.

More trouble-free running in, positive setting and holding, and fast, dependable retrieving mean the Hydraulic-Set Versa-Trieve can really help lower overall costs for highly deviated or horizontal well completions or completions involving tubing conveyed perforating and stimulation operations.
HN00413

Protected C-Ring Release Mechanism

HYDRAULIC-SET VERSA-TRIEVE PACKER

HN00203

Single-Trip Retrievable Packer for High Angle/TCP/Stimulation Completions

Dependable Setting and Retrieving

Bi-directional case-carburized slips hold against pressure from above and below in all casing grades. The slips are located beneath the packer elements, away from debris, simplifying releasing and retrieval. If, for some reason, milling is required, critical external components are rotationally locked.

HN00411

HN00410

Running

HN00412

Triple Seal Multidurometer Element Package

Bi-Directional Case-Carburized Slips

Set

Hydraulic Set Versa-Trieve Packer

CASING SIZE CASING WEIGHT PACKER OD PACKER ID

(in) 5.500

(mm) 139.70

(lb/ ft) 14-17 20-23 17-23

(in) 4.87 4.50 6.19 6.00 5.92 5.77 6.68 6.44 6.19 6.17 8.52 8.30

(mm) 118.62 114.30 156.72 152.72 150.68 146.56 169.67 163.58 156.72 156.72 216.41 210.82

(in) 2.750 3.250 3.880 3.250 3.880 3.250 3.000 3.250 3.880 3.250 3.880 3.250 3.880 3.250 3.880 3.880 5.000 3.880 5.000

(mm) 69.85 82.55 98.55 82.55 98.55 82.55 76.20 82.55 98.55 82.55 98.55 82.55 98.55 82.55 98.55 98.55 127.00 98.55 127.00

7.000

177.80

23-29 26-32 32-38 24-29.7

7.825

193.68

29.7-39 42.8

7.750

196.85

46.1-48.6 36-43.5

9.625

244.48 43.5-53.5

Other sizes available on request.

Production seal assembly ID typically compatible with tubing that has comparable ID to packer bore.

HN00409

Retrieving Tool

Sales of Halliburton products and services will be in accord solely with the terms and conditions contained in the contract between Halliburton and the customer that is applicable to the sale.

CPP5618

1995 Halliburton Energy Services

Printed in U.S.A.

HALLIBURTON

Wireline-Set Perma-Series Packers

Halliburtons Wireline-Set Perma-Series packers are effective, differential production packers for single or multizone completions. These permanent packers may be electric-wireline or hydraulically set on the workstring. They are also designed to leave the packer bore free of all setting devices and maintain a large fluid bypass area through the packer. Operating envelopes are a graphical representation of the safe combination of differential pressure and applied tubing loads and are available for most Perma-Series packers. Applications
high formation, unloading differential, or stimulation pressure areas pulling tubing without unseating packers high bottomhole temperatures downhole conditions demand special running clearance twin-flow chemical injections systems

Features and Benefits

upper internal slip design retains the setting force throughout the packer assembly; lower internal slips prevent upward movement of the upper wedge while running internal locking-slip ring aids in fast removal, saving rig time if milling becomes necessary triple-seal multidurometer seal element package effective at high or low temperatures and pressures metal-to-metal backup shoes with 360 casing wall contact prevent seal element extrusion and offer reliable sealing under ultrahigh pressures contoured C-slip design provides maximum casing contact with uniform slip engagement case carburized slips provide controlled hardness depth and maximum hardness across tooth section core of slip retains original metallic structure for easy milling maintains a large fluid bypass area through the packer saves rig time provides flexibility with multiple receiving head and bottom sub options can be adapted for high-pressure/high-temperature applications
Perma-Series Wireline-Set Packer

Special Shear Arrangement

Receiving Head

Upper Internal Slips

Case-Carburized Upper Slips Lower Internal Slips

Triple-Seal Multidurometer Elements

Metal Back-Up Shoes

Case-Carburized Lower Slips

Production packers for single or multizone completions.

WELLSTAR
LITERATURE TOOL DEMO SIMULATOR LITE

SUPERIOR PERFORMANCE
LITERATURE TOOL DEMO SIMULATOR LITE

For more information on Halliburton Products and Services visit our Home page at http://www.Halliburton.com

HALLIBURTON

Tubing Retrievable Subsurface Safety Valve

Ultimate Design Solution For Reliability Unsurpassed Performance Full Metal-to-Metal Well Containment

Spherical sealing flapper providing unsurpassed MTM sealing

CN03155

Patented Design Recognized by Petroleum Engineering International for Engineering Innovation.

CN03162

The Worlds Most Reliable Safety Valve Setting Tomorrows Standards In Reliability

SP The Ultimate Design Solution for Reliability

The reliability of the Halliburton SP Non-Elastomer Rod Piston TRSV starts with design that is confirmed through industry leading verification and is seen through industry leading performance. Sole emphasis is placed on minimizing life cycle costs as opposed to minimizing equipment build cost. The SP Non-Elastomer Rod Piston TRSV represents a comprehensive design solution for reliability. Design reliability analysis quickly illustrates the SP valves attention to the critical design reliability issues. Performance based sealing. Enhanced metallurgy for critical items. Debris isolation/protection Mechanical loading of critical items.

SP Reliability Features
TM

Sealing
100% MTM well containment in closed position. Verified metal-to-metal flapper seal. Metal-to-metal flapper seat connection. Flapper passes low pressure nitrogen leakage verification through 120 slam closures (API Class II Sand Test consist of 7 slam closures). Each body connection verified to full capability combining external/internal pressure, maximum temperature and compression/tensile loading. Non-elastomer dynamic seals with metal-to-metal static seal in the open and closed position. The metal-to-metal seal is independently verified during the manufacturing process without the dynamic seals in place, ensuring metal-to-metal integrity with every valve made. Hydraulic system isolated from well pressure by metal-to-metal seal when valve is open.

Enhanced Metallurgy
Upgraded materials for all critical items. Selective metallurgy upgrade can alter the design reliability by 500% to 1000% in many cases.

Debris/Isolation Protection
Wiper ring on upper flow tube and metal-to-metal flow tube seating at the bottom isolate critical components during well production. Upper wiper ring also prevents circulation of well fluids through the inner spring chamber during valve closure. Maximized piston area/closing spring force. Selective internal exercise profile provides ability to manipulate flow tube.

CN03163

The Halliburton SP Valve provides the solution to achieving todays life-of-thereservoir completion designs.
TM

Mechanical Loading
Concentric thrust bearing eliminates torsional effects of helical spring and wear of dynamic seals. Flow tube shock absorber protects flow tube, dynamic seals, rod piston and upper MTM hydraulic seal from slam closure. Rigid flow tube concentrically guided at both ends minimizes piston rod loading. Increased rod piston size providing increased durability.

Halliburtons Metal-To-Metal Technology Providing Unsurpassed Reliability

Superior Performance 7 Years Without a Single Hydraulic Failure
The Halliburton SP hydraulic actuator system is the ultimate design solution for overall reliability. This is supported by the fact that the SP Valve established the performance standard for hydraulic actuation, with over 1,250 valve years of operation and no failures. Actuator design is consistent through all sizes and pressure ranges, providing easy correlation of performance. The solid top sub construction provides for virtually unlimited pressure capability of the hydraulic chamber. The manufacturing process individually confirms the metal-to-metal sealing of the hydraulic actuator of each and every valve further ensuring reliability.
Upper MTM Hydraulic Seal

Non-Elastomer Dynamic Seals

Lower MTM Hydraulic Seal

Premium Metal-to-Metal Body Connections

Each Halliburton body joint design is verified to the full working envelope using the Halliburton Deep Well Simulator. This allows verification of not only burst and tension, but also collapse and compression, which others often ignore due to expensive fixturing required to conduct this type testing. Halliburton does not conduct any same as qualification of TRSV body connections. Every body joint size and design goes through the full rigorous verification test.

True Metal-to-Metal Flapper Sealing

True metal-to-metal sealing, provides superior reliability and durability at the critical stage of valve closure. Recognized by Petroleum Engineering International for innovative engineering, the patented spherical sealing flapper design provides unsurpassed metal-to-metal sealing. The flapper seat is coupled to the valve body by utilizing a torqued metal-to-metal seal. This eliminates cyclic seal loading experienced by other comparative designs. Each new design is thoroughly tested including a tortuous slam closure test exceeding API 14A Class 1 and 2 by nearly 20 fold.

CN03165

E E R G I N E N
E L

I N TE

T
I

PE T

A
L

SPECIAL

EN

MERITORIOUS AWA R D

FOR G GIN N I EER IN N O VA T I O N

Halliburton Deep Well Simulator

The Halliburton Deep Well Simulator allows equipment to be tested under simulated well conditions. This advanced system is used extensively by Halliburton to test equipment intended for hot, high pressure, high temperature gas or fluid environment while simultaneously applying tension or compression loads or dynamic manipulation. Tests have been successfully conducted in simulated conditions up to 400 degrees Fahrenheit, 20,000 psi hydrostatic pressure and more than 400,000 lbs compression and 600,000 lbs tension. Use of this simulator allows Halliburton to accelerate development of new equipment designs and sealing technology to provide answers to the increasing demands of todays industry.
Hot Air Flow Path Hot Air Discharge Hot Air Return

Tool Loading Jack Power Pack for Tool Loading Jack Load Flange

Heating System Air Handler and Controls

Rigorous Testing Program

Each SP TRSV design undergoes extensive testing well beyond the industry guidelines established by API 14A, including as a minimum the following: API 14A functional test API 14A Class 1 and 2 verification testing at Halliburton API facility API 14A Class 1 and 2 third party verification testing and certification Combined pressure (full external and internal) and temperature (maximum rated and ambient) tests under compression and tension loads. Differential opening and slam closure testing Extensive sand closure testing using North Sea endurance testing standards, e.g. higher flow rates and increased number of cycles, 120 closures at higher flow rates versus only 7 closures as required in API 14A.

SSSV

CN03762

Halliburton Deep Well Simulator

Sales of Halliburton products and services will be in accord solely with the terms and conditions contained in the contract between Halliburton and the customer that is applicable to the sale.

H00104 5/97

1997 Halliburton Energy Services, Inc.

Printed in U.S.A

HALLIBURTON

WellStar

TM

Tubing Retrievable Subsurface Safety Valve

Compact Design and Premium Material Unique Actuation with Superior Durability Full Metal-to-Metal Well Containment

Spherical sealing flapper providing unsurpassed MTM sealing

CN03155

CN02677

Simple, Compact Design For Optimum Reliability And Durability

WellStar Sets the Standard

for cost-effective, dependable TRSV performance by minimizing long term maintenance costs, and production shutdowns due to valve failure. WellStar safety valves are the product of Halliburtons most recent advances in valve design technology. These hydraulic operated, downhole tubing retrievable safety valves provide reliability and economy through a number of design innovations. The Simple Compact Design of the WellStar provides a reliable cost-effective safety valve ensuring trouble free operation. The valve contains two metal-to-metal body connections with only one connection being exposed to tubing pressure. The single piece actuator enhances the valves unique compact design and provides smooth operation and superior durability.

fluid, preventing exposure of the spring and dynamic seal surfaces to wellbore fluids and debris. The flapper closure mechanism is fully protected by the flow tube during production.

Lock Open Communication System Eliminates Construction Seals

Hydraulic/Spring Chamber Not Exposed To Well Fluids

Superior Durability is achieved by maximized opening and closing forces of the WellStar safety valve. The enlarged piston area provides maximum capability in opening the valve when solids are present. Likewise the enlarged piston area (increasing well assist closure) and the stronger power spring (typically more than double other comparative designs) provides reliability of closure in debris situations. The piston area and flapper shut-in area are balanced to provide flapper protection against differential opening.

Full Metal-to-Metal Well Containment is achieved providing superior reliability at the critical stage of valve closure. The patented, award winning, spherical sealing flapper design provides true reliability and unsurpassed metal-to-metal sealing. The flapper seat is coupled to the valve body by utilizing a torqued metal-tometal seal. This eliminates cyclic seal loading experienced by other comparative designs. Each new design is thoroughly tested including a tortous slam closure test exceeding API 14A Class 1 and 2 by nearly 20 fold. Each metal-tometal WellStar body connection is verified for durability through combined load verification testing with full external/internal pressure, maximum temperature and compressive/tensile loading.

Premium Material Construction

is provided through enhanced metallurgy selection while providing an economical valve. All components in the WellStar valve are made from a minimum of 9Cr-1Mo material for a 9Cr-1Mo valve or a minimum of 13Cr material for any component in a 13Cr valve. Upgrading of valve materials was reported by SINTEF as one of the factors contributing to reliability improvements seen between their Phase III and IV Subsurface Safety Valve Reliability Reports.*
Full MTM Flapper and Seat System

The Unique Hydraulic Actuation uses a single-piece piston/flow tube which eliminates seals and connections. It provides for a smooth operation and rugged durability during well production. The critical internal components of the valve are exposed only to clean hydraulic

CN02675

*SINTEF Reports STF75F89030 and STF75 F91038, Reliability of Surface Controlled Subsurface Safety Valves-Phase III and Phase IV, Foundation for Scientific and Industrial Research at the Norwegian Institute of Technology

Halliburton WellStar Tubing Retrievable Safety Valve Design Innovations

Feature Sealing 100% MTM Well Containment In Closed Position Verified Metal-To-Metal Flapper Seal Metal-To-Metal Flapper Seat Connection Flapper Seat Design Eliminates Cyclic Seal Loading Number Of Well Containing Body Seals Flapper Passes Low Pressure Nitrogen Leakage Verification Through 120 Slam Closures (API Class II Sand Test Consist Of 7 Slam Closures) Each Body Connection Verified To Full Capability Combining External/Internal Pressure, Maximum Temperature And Compression/Tensile Loading Debris/Corrosion Protection Majority Of Internal Components Isolated From Well Fluids And Exposed To Clean Hydraulic Fluid Single Piece Piston/Flow Tube (Enhanced Protection Due To Minimized Componentry) Upper End Of Flow Tube Fully Isolated From Well Debris Enlarged Piston Area/Maximized Closing Spring Force* Flapper Mechanism Isolated From Wellbore By MTM Seating Of The Flow Tube Below The Flapper Premium Material Policy Permanent Lock Open System No Additional Seals Required To Incorporate Secondary Communication Capability Single-Trip Operation (Minimizes Cost And Safety Concerns) Surface Verification Throughout Lock Open Process Yes No Yes No Yes Yes Yes Yes 1 Yes No No No No Typically 2 Or More No WellStar Other Comparative TRSV

TM

Yes

Typically No

Yes

No

Yes Yes Yes All Components 9Cr-1Mo Or Better For Any Component In A 9Cr-1Mo Valve

No No No

Typically Contains Lower Grade Materials

Yes Yes

No No

* Size of piston area and spring force has a direct relationship to reliability in debris

Rigorous Testing Program

Each Wellstar TRSV design undergoes extensive testing well beyond the industry guidelines established by API 14A, including as a minimum the following: API 14A functional test API 14A Class 1 and 2 verification testing at Halliburton API facility API 14A Class 1 and 2 third party verification testing and certification Combined pressure (full external and internal) and temperature (maximum rated and ambient) tests under compression and tension loads. Differential opening and slam closure testing Extensive sand closure testing using North Sea endurance testing standards, e.g. higher flow rates and increased number of cycles, 120 closures at higher flow rates versus only 7 closures as required in API 14A.

Halliburton WellStar Tubing Retrievable Safety Valve General Specifications

TM

Tubing Size in. 2-3/8

2-7/8

3-1/2

4-1/2

Maximum OD in. mm 3.63 92 3.70 94 3.97 101 4.59 117 4.65 118 4.91 125 5.09 129 5.20 132 5.62 143 6.62 168 6.73 171 6.97 177

Internal Lock Packing Bore Profile* in. mm 1.875 48 X

2.313

59

2.813

71

3.813

97

Pressure Rating psi kg/cm2 5,000 352 5,000 352 10,000 703 5,000 325 5,000 325 10,000 703 5,000 325 5,000 325 10,000 703 5,000 325 5,000 325 7,500 527

Length in. 47.1 mm 1196

51.2

1300

56.3

1430

63.5

1613

*Genuine Otis X Profile

Permanent Lock Open System

The WellStar valve is designed to be permanently locked open when operating conditions dictate the necessity. Permanent lock open is achieved using a simplified single-trip operation that minimizes both costs and safety concerns associated with multiple well intervention. The single trip lock open procedure combines mechanical (slickline) and hydraulic operations and offers operational simplicity and surface verification not found in other lock open systems. The innovative WellStar lock open/communication system eliminates potential leak paths which are typically found in other comparative lock open systems.

Sales of Halliburton products and services will be in accord solely with the terms and conditions contained in the contract between Halliburton and the customer that is applicable to the sale.

H00105 1/97

1997 Halliburton Energy Services, Inc.

Printed in U.S.A.

DURASLEEVE
LITERATURE TOOL DEMO TOOL DEMO SIMULATOR LITE INTRODUCTION

MONOLOCK
LITERATURE TOOL DEMO SIMULATOR LITE INTRODUCTION

RPT
LITERATURE TOOL DEMO SIMULATOR LITE INTRODUCTION

MIRAGE
LITERATURE TOOL DEMO TOOL DEMO SIMULATOR LITE INTRODUCTION
MORE INTRODUCTION
For more information on Halliburton Products and Services visit our Home page at http://www.Halliburton.com

SAFETY SET
LITERATURE TOOL DEMO TOOL DEMO SIMULATOR LITE INTRODUCTION

For more information on Halliburton Products and Services visit our Home page at http://www.Halliburton.com

HALLIBURTON

DURASLEEVE CIRCULATION/PRODUCTION SLEEVE

Improved Performance With Non-Elastomer Design

HN00188

Halliburtons new non-elastomer DURASLEEVE circulation/production sleeve is the new standard for sliding sleeve performance. Innovative design features offer improved durability and performance.

Low shifting forces DURATEF ECM non-elastomer seals High pressure equalizing ability

Built-in Halliburton nipple profile Improved shifting system Lowest total cost sleeve available

Test conditions - 5,000 psi (345 bar) external pressure, 325F (165C)

Nitrile Nitrile Seal* Seal* 3000 2500 2000 1500 1000

PEEK PEEK Seal Seal

Shifting Force (lbs)

Improved seal material and high pressure equalizing features are major innovations built into Halliburton's DURASLEEVE circulation/ production sleeve. These improvements set new performance standards for all sliding sleeve devices in the industry. Halliburton's leadingedge design and manufacturing Engineered Engineered Composite technology, with over Composite Seal Seal 100 years of combined sleeve design experience provides these highperformance features.

The new DURATEF ECM seal is a non500 elastomer engineered 0 composite material *The Engineering Test Lab used the nitrile seal as a benchmark to compare the PEEK seal and the engineered composite seal. HN00189 (ECM) available only from Halliburton. DURATEF ECM is so advanced that temperature Lower shifting forces are shown and pressure ranges for testing have been dramatically in the chart above. Even expanded dramatically, resulting in a new after shifting the DURASLEEVE 100 times, specification for sleeves. During testing, shifting force with DURATEF ECM seal, DURASLEEVE devices were repeatedly opened the new Engineered Composite Material, against 5000 psi (345 bar) differential pressure was 80% less than with PEEK seals. with no seal damage.

Built-in Landing Nipple

A Halliburton nipple profile and polished pack-off area serve as a location to install flow control devices. Available profiles include Halliburtons Otis X, R, FBN, and RPT. Additional nipple profiles are available on request.

Improved Port Configuration

Chance of seal damage is reduced by a new equalizing port configuration. Port size is optimized to prevent damage to equalizing shifting tools and to minimize time.

HN00191

Equalizing Feature
Equalizing ports in the inner sleeve allow pressure differential between the tubing and casing to equalize before shifting to full-open position and without seal damage.

Improved Seals
Halliburtons exclusive DURATEF non-elastomer Engineered Composite Material seal provides positive pressure sealing through repeated sleeve operation. Stationary packing arrangement is less susceptible to damage during sleeve travel.

High Strength Body Threads

These threads make the sleeves easier to disassemble, even in exotic materials. This cuts the time required, helps prevent galling of threads and reduces the cost to redress.

HN00190

Sliding Sleeve Feature Scorecard

Halliburton DURASLEEVE Sliding Sleeve Maximum Recommended Equalizing Pressure Differential Average Shifting Force To Open Or Close* Staged Equalizing Tool To Prevent Premature Opening Non-Elastomer Seals And Body Joint Connections Anti-Galling Body Joint Thread Profile For Cheaper, Faster Redress 5000 psi Conventional Sliding Sleeve 1500 psi

<500 lbs Yes

>1500 lbs No

Yes Yes

Yes No

*Note: * Note:Shifting Shiftingforce forcefor forcomparison comparisonwas wasmeasured measuredat atzero zeropressure pressuredifferential differentialwith withsleeves sleevesin in new condition. Actual shifting force may vary due to well conditions and length of time installed.

CN02366

FOR MORE INFORMATION, CONTACT YOUR LOCAL HALLIBURTON REPRESENTATIVE YOUR SOLUTION CONNECTION .
SM

North America Halliburton Center 5151 San Felipe Houston, Texas 77056 USA Phone: 713-624-7474 Fax: 713-624-7580

Europe / Africa Halliburton 150 The Broadway Wimbledon London SW19 1RX England Phone: 0181-544-5000 Fax: 0181-544-6655

Latin America Halliburton Center 5151 San Felipe Houston, Texas 77056 USA Phone: 713-624-3300 Fax: 713-624-3320

Middle East / CIS 1101-1104 Al Moosa Tower Abu Dhabi Highway P.O. Box 3111 Dubai United Arab Emirates Phone: 971-4-310666 Fax: 971-4-310442

Asia / Pacific / China 100 Gul Circle Jurong, Singapore 2262 Republic of Singapore Phone: 65-861-6811 Fax: 65-862-3453

Sales of Halliburton products and services will be in accord solely with the terms and conditions contained in the contract between Halliburton and the customer that is applicable to the sale. CPP5622 1995 Halliburton Company Printed in U.S.A.

HALLIBURTON

Monolock Lock System

Lower Cost Options And Improved Reliability With The Halliburton Monolock Lock System
The ultimate solution to setting flow controls or plugs in monobore completions may be the ability to set a device anywhere in the tubing stringa challenge that Halliburton has met through its unique nippleless lock system, the Monolock Lock System. Halliburtons Monolock is designed to be set anywhere in a given size of tubing, casing, or liner. It differs from a conventional lock mandrel in that the Monolock does not require either a profile or a seal bore in the tubing string. Also, the Monolock is retained in position by slips rather than keys. It may be used in conjunction with the Halliburton FBN Fullbore Nipple System or any other selective nipple and lock system. The Monolock plug was designed for retrievable bridge plug applications and can be adapted to install bottomhole pressure gauges and other flow control devices. Also, the Monolock can be used to plug tubing below the hanger for wellhead repairs. It can be run in wells with landing nipples or other types of restrictions as long as the run OD is smaller than the restriction ID. The Monolock may be set hydraulically on coiled tubing, explosively on conductor line or slickline (in conjunction with an electronic triggering device), or electro-mechanically on slickline. Setting the Monolock with a Downhole Power Unit (DPU) and running/retrieving tool on slickline can help lower installation and retrieval costs. Once set, the Monolock and associated plug assembly holds pressure from either direction. In fact, the Monolock is designed to withstand differential pressures of up to 10,000 psi. The Monolock can be retrieved by slickline or coiled tubing.
Single-Piece Sealing Element

CN02001

One Piece Barrel Slip

Monolock Plug

Economical And Reliable Completion Products

Features and Benefits

Lock is designed to be run and retrieved on slickline. Cost savings result from the ability to plug a well without rig intervention by using lower-cost options such as slickline. Setting mechanism permits lock to be set anywhere in the tubing, liner, or casing. Slip design permits setting in unsupported pipe without deforming the pipe. Slip configuration ensures centralized setting, even in high-angle wells. Seal element is a one-piece design, making it suitable for a wide range of conditions. Seal element is located above the slip to ensure the slip is kept free of debris. Interface between the releasing mechanism and seal element provides element retractability during retrieval process. Belleville spring energizer provides sufficient force across the seal element to create strong initial sealing capability during pressure reversals across the assembly.

Specifications Tubing/Casing Data

Tbg/Csg Size (in.) 3.5 4.5 4.5 4.5 4.5 5 5 5 5.5 5.5 5.5 7 7 7 7 7 7 7 7 7 Weight (lb) 9.3 12.6 13.5 13.5 15.5 15 18 18 17 20 23 23 26 29 26 29 32 32 35 38 Nominal ID (in.) 2.992 3.958 3.920 3.920 3.826 4.408 4.276 4.276 4.892 4.778 4.670 6.366 6.276 6.184 6.276 6.184 6.094 6.094 6.004 5.920 Drift (in.) 2.867 3.833 3.795 3.795 3.701 4.283 4.151 4.151 4.767 4.653 4.545 6.241 6.151 6.059 6.151 6.059 5.969 5.969 5.879 5.795 Standard Nipple ID (in.) 2.813 3.813 3.813 3.688 3.688 4.125 4.125 4.000 4.562 4.562 4.562 6.000 6.000 6.000 5.963 5.963 5.963 5.750 5.750 5.750 Max OD (in.) 2.78 3.78 3.78 3.66 3.66 4.09 4.09 3.97 4.53 4.53 4.53 5.97 5.97 5.97 5.92 5.92 5.92 5.72 5.72 5.72

Monolock Data
Fish Neck (in.) 1.810 1.380 1.380 1.380 1.380 1.380 1.380 1.380 1.810 1.810 1.810 2.310 2.310 2.310 2.310 2.310 2.310 2.620 2.620 2.620 Pressure Rating (psi) 8,100 6,700 7,200 7,200 8,300 6,600 8,100 8,100 6,200 7,300 8,000 5,000 5,800 6,500 5,800 6,500 7,200 6,700 7,200 7,200 Part Number 21ML27810 21ML37810 21ML36610 21ML40910 21ML39710 21ML55010

21ML59710

21ML59210

21ML1

Sales of Halliburton products and services will be in accord solely with the terms and conditions contained in the contract between Halliburton and the customer that is applicable to the sale.

H00018

1996 Halliburton Company

Printed in U.S.A.

HALLIBURTON

RPT High Pressure No-Go Lock System

RPT no-go landing nipples and lock mandrels are designed for high pressure, high temperature large bore completions. The RPT System was developed for use in the stringent North Sea environment and has been successfully used in fields around the world.
TUBING RETRIEVABLE SAFETY VALVE WITH TOP NO-GO NIPPLE PROFILE

Features and Benefits

All RPT lock mandrels are designed for 10,000 psi pressure rating from above and below for positive plugging in high pressure well conditions. Ideal for tapered no-go nipple completion design. Seal Bore is optimized to provide maximum I. D. through the completion string. No-go shoulder in landing nipple provides positive locator for lock mandrel. RPT lock mandrels are run and retrieved using the industry standard X-Line service tools and procedures providing simple, reliable operation.
TOP NO-GO LANDING NIPPLE HIGH PRESSURE LOCKING KEYS RPT PROFILE POSITIVE NO-GO LOCATING SHOULDER HIGH TEMPERATURE PACKING STACK
CNO3206

DURASLEEVE SLIDING SLEEVE WITH TOP NO-GO NIPPLE PROFILE

RPT Plug and Landing Nipple

TOP NO-GO SERIES LANDING NIPPLE

Typical Completion Utilizing RPT System

Safe, Simple, Reliable System for Critical Wells

CNOO101

TOP NO-GO SERIES LANDING NIPPLE

Operation
Halliburton RPT No-Go Landing Nipples provide a means of running a series of nipples in a tubing string when a stepdown completion with a large through-bore is required. The Halliburton Landing Nipples are designed to accept Halliburton RPT Lock Mandrels with a minimum rated working pressure of 10,000 psi, both upstream and downstream. Since the Lock Mandrel No-Go locates on top of the nipples polished bore, there are no secondary restrictions normally associated with bottom no-go profiles. The No-Go Nipple provides positive location of the lock and minimizes the possibility of misruns. Nipple bores are stepped down in approximately 1/8-inch increments to minimize loss of throughbore ID. Halliburton RPT Lock Mandrels within a given size range are designed to use the same running tool, pulling tool, and equalizing prong.

RPTTM Profile and Lock Dimensions

Nipple Profile
(Minimum ID) IN MM IN

Lock Mandrel ID
MM IN

Tubing Size

Seal Bore

OD
MM

2 3/8

1.500 1.625 1.781 1.875 2.000 2.188 2.313 2.000 2.188 2.313 3.000 3.125 3.313 3.437 3.562 3.688 3.750 3.813 4.000 4.188 4.313 4.437 4.500 4.562 4.688 5.500 5.625 5.750 5.875 5.963 6.250

38.10 41.28 45.24 47.63 50.80 55.58 58.75 50.80 55.58 58.75 76.20 79.38 84.15 87.30 90.47 93.68 95.25 96.85 101.60 106.38 109.55 112.70 114.30 115.87 119.08 139.70 142.88 146.05 149.23 151.46 158.75

.750 .750 .750 .750 1.120 1.120 1.120 1.120 1.120 1.120 1.750 1.750 1.750 1.940 1.940 1.940 1.940 1.940 1.940 2.750 2.750 2.750 2.750 2.750 2.750 3.680 3.680 3.680 3.680 3.680 3.680

19.05 19.05 19.05 19.05 28.45 28.45 28.45 28.45 28.45 28.45 44.50 44.50 44.50 49.28 49.28 49.28 49.28 49.28 49.28 69.85 69.85 69.85 69.85 69.85 69.85 93.48 93.48 93.48 93.48 93.48 93.48

1.560 1.685 1.841 1.935 2.060 2.248 2.373 2.060 2.248 2.373 3.060 3.210 3.395 3.520 3.650 3.770 3.807 3.895 4.090 4.270 4.395 4.520 4.550 4.650 4.760 5.585 5.710 5.840 5.940 6.025 6.330

39.62 42.80 46.76 49.15 52.32 57.10 60.27 52.32 57.10 60.27 77.72 81.53 86.23 89.41 92.71 95.76 96.70 98.93 103.89 108.46 111.63 114.81 115.57 118.11 120.90 141.86 145.03 148.34 150.88 153.04 160.78

2 7/8

3 1/2

4 - 4 1/2

4 1/2 - 5

5 1/2

Sales of Halliburton products and services will be in accord solely with the terms and conditions contained in the contract between Halliburton and the customer that is applicable to the sale. H00039 1996 Halliburton Company Printed in U.S.A.

HALLIBURTON

Mirage Disappearing Plug

The Halliburton Mirage Disappearing Plug is a plugging device designed to run as an integral part of the tubing. The plug can be used to set a hydraulic-set packer or to test the tubing string. It is activated by hydraulic pressure, eliminating the need to use wireline or coiled tubing to run and retrieve the plugging device. Once the plug has been expended, the plug material will dissolve and disintegrate leaving full tubing ID through the plug. A fill sub is run above the mirage plug when tubing autofill is required. Applications
horizontal and high angle wells where slickline or CTU intervention after completion is undesirable setting production and isolation packers testing tubing wells where retrievable plug after use is undesirable

Features and Benefits

testing tubing can be accomplished without delay or problems associated with other plugging methods soft expend feature minimizes shock damage to formation reduces completion costs by eliminating trips to install and retrieve plugging device water used to dissolve plug is carried with the tool a diaphragm is run in the top of the tool to keep debris off plug matrix full nonrestrictive ID after expending plug maximum particle size after the plug material has disintegrated is 1 mm, eliminating any well debris can be mechanically activated by wireline as a backup multiple pressure cycle capability hold differential pressure from above and below automatic expend after last pressure cycle reduces well risk, reduces number of slickline or CTU trips in the hole, allows multiple pressure tests prior to expending

Mirage Disappearing Plug

Cost-effective completion technology

HALLIBURTON

Safety Set Lock Mandrel System

Halliburtons SAFETYSET lock mandrel system is a drive-down, jar-up-to-set, no-go type system designed specifically for surfacecontrolled subsurface safety valve (SCSSV) applications. This patented system consists of a SAFETY SET lock mandrel, running tool, and unlocking tool. The SAFETY SET lock mandrel system is designed to help ensure valve-set integrity and hydraulic control communication to the safety valve. The design features a locking sleeve that moves upward in the direction of flow to establish a locked safety valve. This locking allows unlimited drive-down action without the possibility of presetting the lock while it travels downhole. A no-go shoulder on the lock mandrel provides positive locating within the landing nipple. This system is designed to minimize operator guess work at the surface by requiring two independent conditions to exist before the running tool will release. The SCSSV must be pressured open for the lock keys to expand. Only when the locking sleeve is locked in place will the running tool release. A running tool retrieved to the surface without the lock and valve indicates a functional valve securely locked into the landing nipple.

Applications
uniquely designed for wirelineretrievable SCSSV applications high flow rates

Options
designs are available for all RQ and RPT landing nipple profiles models can be designed to land and lock in any safety valve landing nipple with a no-go ID staggered-bore SAFETYSET lock mandrels are available for safety valve landing nipple installations

Features
lock mandrel can only lock in the nipple after control line integrity is established no shear pins in the running tool running tool can be released only after lock mandrel locks and SCSSV is operable large ID locking sleeve locks in the direction of flow optimum pressure rating design on lock mandrel anti-vibration ring in lock mandrel

Benefits
helps eliminate the possibility of subsurface safety valves being left downhole without proper installation or without control line pressure integrity no shear pin damage to safety equipment, seals, or sealing bores no presetting or false set indications from premature pin shearing helps avoid a possible flow-out of the subsurface safety valves to surface minimal metal-to-metal abrasion from vibration lock system is protected from accidental unlocking by slickline tools passing through the ID

Safety Set Lock Mandrel System

Reliable subsurface flow control technology

STPP SINGLE-TRIP PerfPac COMPLETION SYSTEM

LITERATURE TOOL DEMO SIMULATOR LITE INTRODUCTION

For more information on Halliburton Products and Services visit our Home page at http://www.Halliburton.com

STPP Single-Trip PerfPac Completion System

TM

Perforate, complete and clean up in a single run

eparate trips for perforation, completion, and clean up are no longer required. Halliburtons Single-Trip PerfPac System provides cost effective, single run completions with an innovative design that combines all required equipment on a single string.

Perforating

FracPacking

Completing

Single run system saves time and money

Save rig time. Halliburtons single-trip completion saves a minimum of two runs in the hole for faster completions. Begin production sooner. The decreased number of runs means the well can be brought on line earlier. Meet all completion needs. The Single-Trip PerfPac System is extremely flexible. It can be configured to perform a water frac, high rate water pack, FracPac, Slurry Pac, or a gravel pack. Minimize fluid loss, avoid well control problems. Single-trip speed means faster completions that help prevent excessive loss of expensive completion fluids to the formation.
Champ IV

MPT Setting Tool Versa-Trieve Packer

Versa-Trieve Production Packer w/Foot Valve

Fluid Loss Flapper Blank Versa-Trieve Packer w/Fluid Loss Flapper

Breakthrough performance using proven technology

MPT gravel pack service tool prevents premature setting of the gravel pack packer during perforation, allowing the packer and TCP guns to be run together. A non-rotating tool, it eliminates the need to rotate downhole to separate from the gravel pack packer. It also easily converts to a washdown tool. Big bore packer accommodates a larger ID/OD ratio, allowing the TCP guns to pass through the sump packer. Champ Packer eliminates the need to displace the entire wellbore with nitrogen. By confining displacement to the tubing, less nitrogen is used and better control of the underbalance pressure and TCP firing is achieved. OMNI Valve eliminates the need to move tubing to kill the well after perforating. P-110 grade blank prevents the collapse of the screen and blank. TCP gun systems are available in a wide variety of sizes to optimize completion performance.

Screen Sump Seals TCP

BBP Sump Packer

This Single-Trip PerfPac System was configured for a shallow, high-pressure environment. Variations of the system are available for highly-deviated, normal and below-normal pressured wells.

Save rig time, cut fluid loss, stop well control problems

HN01104

Efficient Single-Trip completion saves Texaco over $1.3 million

Offshore Louisiana: Texaco was using ZnBr2 to control high pressure in a well with TVD of 6,300 ft and BHP of 7,000 psi. Excessive amounts of the expensive completion fluid were being lost to the formation. Halliburton designed a Single-Trip PerfPac System to minimize rig time and cut fluid loss. The system performed TCP perforating and a FracPac sand control treatment during a single run. The completion was performed as planned, saving over 3-1/2 days of rig time and hundreds of barrels of ZnBr2. The entire completion saved an estimated $1.376 million compared to a previous completion in the same field. The well is producing 2,000 BOPD and 1.446 MCFD sand free.

HalliburtonYour Solutions ConnectionSM Contact your local Halliburton representative for more information on how an efficient Single-Trip PerfPac System completion can save you money.

Sales of Halliburton products and services will be in accord solely with the terms and conditions contained in the contract between Halliburton and the customer that is applicable to the sale. H00142 01/97 1997 Halliburton Energy Services, Inc. Printed in U.S.A.