QUICK-START GUIDE

NUMARK N4

Installation and Setup

The Numark N4 is a class compliant USB plug and play device and requires no further driver installation. 1. Download and install the latest version of Serato DJ from http://serato. com/dj/downloads 2. Connect your Numark N4 to an available USB Port. 3. Open Serato DJ

Serato DJ Activation
To find out how to activate Serato DJ by either starting your free 14 day trial, or purchasing a license for Serato DJ, click here for the most up to date information.

1 2 3 4 5 6

8 9 10 11 12 13 14

15 16 17 18 19 20 21

22

23

24

25 26

# 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

Numark N4 Control POWER SWITCH POWER INPUT CORD HOOK USB INPUT USB IN REC/TIMECODE BALANCED OUTPUT R BALANCED OUTPUT L (XLR) GROUNDING LUG MASTER OUTPUT BOOTH OUTPUT LINE/PHONO INPUT 4 INPUT 3 LINE/PHONO MIC 1 GAIN MIC 1 INPUT MIC 2 INPUT MIC 2 GAIN TREBLE BASS MIC OFF/ON SOURCE PC/INPUT 3 SOURCE PC/INPUT 4 CF CONTOUR HEADPHONES HEADPHONES

Function Power On/Off Connect power supply Secures cable Connect USB cable to/from computer N/A Master Output (XLR) Master Output (XLR) Used to ground turntables Master Output (RCA) Booth Output (RCA) Selects between Line/Phono for Input 4 RCA input for external devices RCA input for external devices Selects between Line/Phono for Input 3 Controls the mic level being sent to Master Output Mic Input 1 Mic Input 2 Controls the mic level being sent to Master Output Adjusts high (treble) frequencies for Mic Inputs Adjusts low (bass) frequencies for Mic Inputs Mic Channel On/Off Toggle between Serato DJ (PC) or input 3 Toggle between Serato DJ (PC) or input 4 Adjusts the slope of Crossfader 1/8 "Headphone Output 1/4 "Headphone Output

Looping
You have up to 8 loops per track in Serato DJ, and the choice between either manual or auto loops. You can choose whether you have 4 loops (and 4 cuepoints) showing on screen, or 8 loops. To switch between Manual and Auto looping, click (Manual) or (Auto) onscreen. You can also halve or double the loop length in either manual or auto modes. Numark N4 Control LOOP IN LOOP IN LOOP OUT LOOP OUT RELOOP TIME/ELAPSED REMAINING Manual Loop Mode Set loop in point (Loop not active) Adjust loop in point (Loop active) Set loop out point (If loop in point is set) Adjust loop out point (Loop active) Activates and jumps to Loop Loop On/Off Loop Shift Left Loop Shift Right Shift Halve Loop Length Double Loop Length

NOTE: The best way to edit the in and out points of a manual loop is with the jog wheel/platter on your Numark N4. Simply hit the LOOP IN or LOOP OUT button, depending on which end of the loop you want to adjust, and then rotate the platter to set the in or out point. NOTE: You can also save a loop to the next available free loop slot in the software. To do this, either click the button in the manual/auto loop tab or click on an available loop slot. Your loops are saved to the file and recalled the next time it is loaded. They are not lost if the file is moved or renamed.

DJ-FX
The DJ-FX in Serato DJ are powered by iZotope. Click the FX tab to open the FX panel. Select either 1, 2, 3, 4 or M to assign the selected effect bank to a deck or Master Output. There are two available modes in the DJ-FX. Single FX Mode allows you to select one effect per FX bank, and has multiple parameters that can be adjusted. Multi FX Mode allows you to select up to three effects per FX bank, and adjust only one parameter, the FX Depth. The same effects available in Single FX mode are available in Multi FX mode, as well as some additional presets. You can select between the two FX modes by clicking either the Single FX mode button or Multi FX mode button

Numark N4 Control FX 1 ON (Button) FX 2 ON (Button) FX 3 ON (Button) FX AUTO/TAP (Button) FX 1 PARAM (Knob) FX 2 PARAM (Knob) FX 3 PARAM (Knob) FX BEATS/MULTI (Knob) Effect On/Off

Single FX Mode Adjust FX Parameter 2 Adjust FX Parameter 4 Tap to the desired FX tempo. To return to AUTO mode, press and hold Adjust FX Parameter 1 Adjust FX Parameter 3 Adjust FX Parameter 5 Adjust Beats Multiplier

Multi FX Mode Slot 1 Effect On/Off Slot 2 Effect On/Off Slot 3 Effect On/Off Tap to the desired FX tempo. To return to AUTO mode, press and hold Adjust Slot 1 FX Parameter Adjust Slot 2 FX Parameter Adjust Slot 3 FX Parameter Adjust Beats Multiplier

Shift

Select Effect in Slot 1 Select Effect in Slot 2 (Multi FX) Select Effect in Slot 3 (Multi FX)

SERATO VIDEO
Serato Video is a software plugin for Serato Software which adds the ability to playback and mix video files, use effects and fader transitions with your Serato DJ Controller, an additional MIDI controller or your mouse/keyboard. For more information on Serato Video go to http://serato.com/video

MIDI
The MIDI control feature in Serato DJ provides the ability to map Serato DJ software functions to MIDI controller functions such as keyboards, triggers, sliders, and knobs. Integrating MIDI controllers into your Serato DJ setup can improve live performance usability, such as hitting pads on a MIDI controller to trigger Loops and Cue Points. For more information download the Serato DJ manual by going to http:// serato.com/dj/downloads NOTE: You can not MIDI Map your Numark N4, you will need to connect an additional MIDI controller to use these MIDI functions.

Controller
14 13 12 11 10

15

16 17 18 19

20

21

22

23

24 25 26

27

9 8 7 6 5
CUE CUE

35

34

33

32

31 30 29 28

NOTE: SHIFT button is used with other buttons that have shift modifier functions. # 1 2 Numark N4 Control PLAY/PAUSE CUE Play/Pause Add/Trigger Temp Cue Function Stutter Play Jump to start of track (more than 2 Sec elapsed) Previous track (less than 2 sec elapsed) SHIFT Function

3 4 5 6 7 8 9 10 11

PLATTER PITCH BEND -/+ SYNC TAP SCRATCH KEYLOCK PITCH RANGE LOOP CONTROLS TEMPO FADER

Touch the top to scratch or jog. Moving the outside of the wheel will jog. Use to nudge the pitch up or down. This will slightly speed or slow down your track temporarily. Sync On Manually tap BPM/Hold down to set Toggle between Scratch and Jog mode Keylock On/Off Cycle through available Tempo Ranges See Looping section for more information Adjust Tempo When in Sync mode, used to disable the Tempo Fader temporarily and change the zero position Activate Cue Point delete mode. Cue Points will flash, press FX 2/3 ON and FX AUTO/ TAP buttons to delete. Add/Trigger Cuepoints 1-3 Select Effect in Slots 1-3 Activate Beat Skip mode. Move platter/jog wheel to Beatskip. Sync Off (Press twice to return to Absolute Pitch when in Relative Mode)

12 13

TEMPO LED FX 1 ON

Light on when Pitch Fader is at zero Slot 1 Effect On/Off

14 15 16

FX 2/3 ON and FX AUTO/TAP FX 1-3 PARAM FX BEATS/MULTI

See DJ-FX section for more information Adjust Slot 1-3 FX Parameters Adjust Beats Multiplier

17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

Deck Layer LED Deck Layer Select CUE MIX CUE VOLUME BROWSE CHANNEL LED BOOTH MASTER LOAD GAIN TIME ELAPSED/ REMAINING CHANNEL EQs LINE INPUT LED PC INPUT LED CUE CROSSFADER CHANNEL FADER LED METERS X-FADER ASSIGN

Indicates which deck you have currently selected Select between Decks 1/3 or 2/4 Adjust headphone output between cue and master Adjust headphone output Scroll through currently focused area (library/crates/etc)/Push to cycle open panels Indicates when track is loaded/playing/no track loaded Adjust Booth Output Adjust Master Output Load track to selected deck (Tap twice for Instant Double) Adjust Gain for selected Channel Loop On/Off Adjust HI, MID and LOW frequencies for selected channel Indicates that Line input is selected Indicates that PC input is selected Cue selected channel in headphones Crossfades between left and right channels Adjusts Channel volume Monitors the audio levels of the Master Output Assign selected channel to either left or right for the crossfader Plays Sample slot 1-4 Loop Shift Right Eject Track Fast Scroll

Using the Tool Tips

Click on the icon to enable Tool Tips. This is located in between the MIDI and setup button in the top right hand corner of the screen. Tool Tips provide a handy way to learn the various features of Serato DJ. Move the mouse over a section of the screen to bring up a context sensitive tool tip. Holding the mouse over the button with Tool Tips turned on will show you a list of all keyboard shortcuts. For more information about how to use Serato DJ, please go to our website www.serato.com or refer to the Serato DJ Software Manual. For more information on your controller, please refer to the hardware manual. For further help, please contact [email protected] or go to www.serato.com/ dj/support