PRODUCT DATA SHEET
FINAL DRIVE AND AXLE OIL
Final Drive and Axle Oil is a high performance lubricant designed to optimize the performance of drive trains of off-highway vehicles. Final Drive and Axle Oil SAE 50 and 60 are formulated for final drives and differentials where lubrication of heavily loaded gears and bearings is the main consideration. Final Drive and Axle Oil is not recommended for use in gear drives where frictional materials are used. The use of Final Drive and Axle Oil, in combination with Heavy Duty Diesel Engine Oil in the engine and Molylube 5% Moly Extreme Pressure Grease AC or Molylube 5% Moly Extreme Pressure Grease LC in the centralized lubrication system, provides a total lubrication package of unsurpassed wear control, extended drain intervals and reduced consumption for a significant improvement in cost effectiveness.
Applications
Final drives and differentials of equipment where Caterpillar FD-1 fluid are recommended Final drives and differentials where Caterpillar TO-4 type oils are recommended or currently in use
Features and Benefits
Superior Extreme Pressure Thermal stability Protects gears and bearing that are subject to extreme loads. Extends component life. Protects against oxidation. Will not break down in high temperature service. Minimizes vanish and sludge formation. Extends drain intervals. Protects parts against rust and corrosion even during humid idle conditions. Maintains viscosity and maximum protection even under high shear conditions.
Corrosion resistance Shear stable formula
General Description
Final Drive and Axle Oil is heavy-duty drive train oil formulated for use where Caterpillar FD-1 fluids are required. Final Drive and Axle Oils ultimate additive and base oil technology will deliver exceptional performance, significantly reducing gear and bearing wear and extending oil service life in extremely harsh operating environments.
Product No. 79660, 79650
Page 1 of 2 With continual research and development, Bel-Ray Company, Inc. reserves the right to change the information contained herein. The Company is not responsible for misuse or misapplication of its products. 1/30/2013
Bel-Ray Company, Inc. P.O. Box 526 Farmingdale, NJ 07727 USA TEL +1 732-938-2421 FAX +1 732-938-4232 www.belray.com
FINAL DRIVE AND AXLE OIL
TYPICAL PROPERTIES
Product No.
SAE Engine Oil Grade Viscosity, ASTM D445 @ 40C, cSt @ 100C, cSt Viscosity Index, ASTM D2270 Pour Point, ASTM D97 C (F) Copper Strip Corrosion, ASTM D130 3 hrs @ 150C, rating Foam Test, Dry and Wet (with 0.1% water), ASTM D892 Sequence I, ml/ml Sequence II, ml/ml Sequence III, ml/ml Falex EP Test, ASTM D3233 Method B Non-seizure Load, lbf Timken EP Test, ASTM D2782 OK Load, kg (lb) Flash Point, ASTM D92 C (F) Specific Gravity, ASTM D1298, 60/60F Color
79660
50
79650
60
208 18.0 94
314 23.5 94
-24 (-11)
-18 (0)
1a
1a
0/0 0/0 0/0
0/0 0/0 0/0
3000
3000
29.5 (65)
29.5 (65)
228 (442) 0.908 Amber
238 (460) 0.918 Amber
Page 2 of 2 With continual research and development, Bel-Ray Company, Inc. reserves the right to change the information contained herein. The Company is not responsible for misuse or misapplication of its products.
1/30/2013
Bel-Ray Company, Inc. P.O. Box 526 Farmingdale, NJ 07727 USA TEL +1 732-938-2421 FAX +1 732-938-4232 www.belray.com
