Scribd
Upload
227 views0 pages

Florence Cathedral Model Guide

This document provides assembly instructions for a paper model of the Florence Cathedral in Italy. It includes: - Ten sheets of patterns to cut out the 69 parts (with 2 spare parts) of the cathedral buildings and display stand. - Five sheets of assembly instructions showing the order to attach parts and diagrams of each step. - Tips for assembly like numbering parts, creasing folds, and using a thin paper for small parts. - The completed model will show the cathedral buildings mounted on a display stand, facing the correct directions.

Uploaded by

Abraam Herrera Walter
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
227 views0 pages

Florence Cathedral Model Guide

This document provides assembly instructions for a paper model of the Florence Cathedral in Italy. It includes: - Ten sheets of patterns to cut out the 69 parts (with 2 spare parts) of the cathedral buildings and display stand. - Five sheets of assembly instructions showing the order to attach parts and diagrams of each step. - Tips for assembly like numbering parts, creasing folds, and using a thin paper for small parts. - The completed model will show the cathedral buildings mounted on a display stand, facing the correct directions.

Uploaded by

Abraam Herrera Walter
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 0

View of completed model

* Build the model by carefully reading the Assembly Instructions, in the parts sheet page order.
* Assembly will be easier if you write the part's number on the back of each part.
No. of Parts : 69 (Including 2 spare parts)
Assembly Instructions : Five A4 sheets
Parts sheet (Pattern) :Ten A4 sheets
Assembly tip: Before gluing, crease the paper along mountain fold
and valley fold lines and make sure rounded sections are nice and stiff.
South face
North face
West face
East face
The Florence Cathedral is a world heritage listed gothic-style basilica, and is a famous landmark of the
historical district of Italy's Florence. Construction of the basilica began in 1296, and took more than
140 years to complete.The Florence Cathedral is composed of three buildings: the"Duomo," which is
famous for its huge dome roof and is the fourth-biggest cathedral in the world;
the "Baptistery of San Giovanni," an octagonal building famous for the "Gates of Paradise;"and
"Giotto's Bell Tower," which stands to the side of the Duomo.
The white, green, and red marble exterior of the Cathedral is decorated with beautiful sculptures and
mosaic works from many different artists.
Each page of the "Parts sheet" has a sheet number in the top left-hand corner (Sheet No.2 No.10).
Work in order of these sheet numbers.
Each part has a "parts number" printed on it. Also, each glue tab is marked with one of three symbols.
indicates glue tabs to be attached to connection areas within the same part.
For glue tabs marked with a number, attach them to the glue tab with the same number
on the connection areas of other parts.
For glue tabs marked with a "parts number," attach them to the part with the number printed.
Check the diagrams in the "Assembly Instructions" carefully for each part as you work.
Before starting.
The numbers in the Assembly Instructions indicate the order to attach parts.
Follow this order when attaching.
For small parts, assembly
will beeasier if youusea
slightly thinner typeof paper.
Handy Hint
Attachtheredcircledareaof 2B
tothepart of 2Dindicated
by thearrowas shown.
*Theraiseduppart of theroof peak
Sheet No.2
Sheet No.3
* Gluetogether theinsideedges
of theseamtomaketheroof peak standup.
For small parts, assembly will beeasier if youuse
aslightly thinner typeof paper.
Handy Hint
Therearespares providedfor thesmall parts,
touseincaseof misplacedparts or cuttingerrors.
Attachthecross sothat it
faces theeast-west direction.
Alignthereversesides andattach.
South
North
West
East
Mountainfold
Valley fold
Attach25and26
inthesameway.
West face
* Attachtotheareas labeled14, 15, and16onpart 8Aof thedisplay stand.
( Refer toAssembly Instructions page5)
Sheet No.4 Sheet No.5
Attachparts 4D 4Kto
theareas of 4Cas shown.
Sheet No.6, 7
Sheet No.8, 9, 10
Sheet No.6
Sheet No.7
Sheet No.10
Sheet No.9
Sheet No.8
* After completingthedisplay stand,
attachthebuildings totheareas shown.
Florence Cathedral, Italy : Assembly Instructions
Sheet No.9, 10
Sheet No.9
Sheet No.10
View of completed model
South
North
West East
entrance
Attachthefacewiththe
entrance(shownabove)
sothat it faces theeast
direction.
* Attachtheshort sideflaps inside.
* Attachthefour corners.
* Foldinthecenter, andgluethereversesides.
* Attachthebuildings
tothecompleteddisplay stand.
* Gluethis side

You might also like