GulfSea HYPERBAR SUPER CS
Calcium Sulfonate Complex Semi-synthetic EP Grease for Heavy Duty Applications
Product Description
GulfSea HYPERBAR SUPER CS grease is heavy duty calcium sulfonate complex soap based grease for use in a wide range of marine, industrial and automotive applications. It is manufactured from high quality semisynthetic base oils and performance additives to provide good structural stability, resistance to water washout and effective protection from wear and corrosion. It is specially designed to deliver outstanding performance in severe application areas like marine, mines, offshore and heavy duty off-highway equipment.
Features & Benefits
Superior extreme pressure properties extend bearing life under shock-load conditions. Outstanding mechanical stability and resistance to softening ensures long lubricant life and prevents leak out of bearings even in the presence of water. Excellent corrosion protection and resistance to water washout resulting in improved component protection and equipment life. Good adhesive property ensures that the grease stays in place for longer relubrication intervals. Very good low temperature fluidity / pumpability even in cold weather making it ideal for use in centralised lubrication systems in marine, industrial and automotive applications. High drop point ensures extended operating range of up to 150C.
Applications
Heavy duty equipments used in marine, off-shore, cement, mining / quarrying, agriculture & forestry/ logging, off highway and other industrial as well as automotive applications. Slide rails, metal cables, wire ropes, winches, open gears, chains, etc under severe conditions. General lubrication of axles, ball joints, universal joints, couplings, power take-offs, kingpins, bushings and disc brakes .
Due to continual product research and development, the information contain herein is subject to change without notification. Typical Properties may vary slightly
Page 1 of 2
GULF OIL MARINE LTD. 25th Floor, 3 Lockhart Road, Wanchai, Hong Kong Tel: +852 3693 0536 Fax: +852 3748 9960 Web: www.gulf-marine.com
Typical Properties
Meets the following Specifications
ISO 6743-9 L-XBDIB0, DIN 51502 OGP0N-20
Typical Properties
Test Parameters Colour Texture NLGI Type of base oil Estimated operating temperature range Base oil viscosity at 40C; cSt Consistency, worked penetration 60 strokes Worked penetration after 100,000 strokes; change in consistency Dropping point; C Oil separation at 25C for 24 hrs; %wt. Oxidation resistance, pressure drop; psi Water washout at 79C; %wt. loss Four ball weld load; kgs Timken load; lbs SKF - EMCOR steel corrosion; rating Copper strip corrosion at 100C for 24 hrs; rating Rust Protection Test Method Visual Visual Typical Values Caramel Smooth / Buttery 0 /1 Semi-synthetic -25C to 150C 1720 345 3 260 1 5 2.5 >400 60 0-0 1a Pass
October 2008
D 445 D 217 D 217 D 2265 D 1742 D 942 D 1264 D 2596 D 2509 D 6138 D 4048 D 1743
Due to continual product research and development, the information contain herein is subject to change without notification. Typical Properties may vary slightly
Page 2 of 2
GULF OIL MARINE LTD. 25th Floor, 3 Lockhart Road, Wanchai, Hong Kong Tel: +852 3693 0536 Fax: +852 3748 9960 Web: www.gulf-marine.com
