Air terminals and fixings
Rod length 500mm 1000mm 2000mm 500mm 1000mm 2000mm Rod diameter 15mm 15mm 15mm 15mm 15mm 15mm Thread diameter 16mm 16mm 16mm 16mm 16mm 16mm Material Copper Copper Copper Aluminium Aluminium Aluminium Weight Part no. per rod 0.73kg RA215 1.51kg RA225 3.00kg RA240 0.29kg RA015 0.53kg RA025 1.06kg RA040
Taper pointed air rod
Can be installed with or without multiple point. Supplied with locknut.
Multiple point
Rod diameter 15mm Material Copper Weight Part no. per rod 0.27kg RA600
For use with taper pointed air rods.
Blunt air rods
Rod length 500mm 1000mm 2000mm 500mm 1000mm 2000mm Rod diameter 15mm 15mm 15mm 16mm 16mm 16mm Thread diameter 16mm 16mm 16mm 16mm 16mm 16mm Material Copper Copper Copper Aluminium Aluminium Aluminium Weight per rod 0.73kg 1.51kg 3.00kg 0.29kg 0.53kg 1.06kg Part no. RAD215 RAD225 RAD240 RAD015 RAD025 RAD040
Supplied with locknut. Field trial tests in the United States, carried out over many years research have confirmed that blunt air rods are struck by lightning in preference to taper pointed air rods.
Reference: Lightning rod improvement studies by C B Moore,W Rison, J Mathis, G Aulich. Journal of Applied Meteorology, May 2000.
Air terminal base
Rod diameter 15mm 15mm Thread diameter 16mm 16mm Maximum conductor width 25mm 25mm Material Weight each 0.47kg 0.15kg Part no.
Copper Aluminium
SD105 SD003
Recommended fixing - counter sunk woodscrew 1 1/2 x no.10 and wall plug.
TSCAT1a
www.furse.com
Flat tape system | Lightning protection
Ridge saddle
Air terminals and fixings
Rod diameter 15mm Thread diameter 16mm Maximum conductor width 31mm Material Weight each 1.07kg Part no.
Copper
SD115
Recommended fixing - counter sunk woodscrew 1 1/2 x no.10 and wall plug. For supporting lightning conductor air rods on ridges.
Strike pad
Material Copper Aluminium Weight each 0.41kg 0.13kg Part no. PL010 PL005
Description Copper stem for use with PL010
Weight each 0.07kg
Part no. SM010
This product is supplied with a set screw to enable the lightning conductors to be attached to the strike pad.
TSCAT1a
Lightning protection | Flat tape system
www.furse.com
Air terminals and fixings
Air rod diameter 15mm 15mm Rod material Copper Aluminium Weight each 0.90kg 0.28kg Part no. BR105 BR005
Rod brackets
Recommended fixing - round head woodscrew 1 5/8 x no.16 and wall plug.
Rod to tape coupling
Air rod diameter 15mm 15mm Thread diameter 16mm 16mm Rod material Copper Aluminium Weight each 0.23kg 0.08kg Part no. CG600 CG500
Used in conjunction with rod brackets above.
Puddle flanges
Conductor material Copper Aluminium Weight each 1.54kg 0.50kg Part no. PF105 PF005
For taking lightning conductors through roofs etc.
TSCAT1a
www.furse.com
Flat tape system | Lightning protection
DC tape clip
For use with bare copper Conductor size 20 x 3mm 25 x 3mm 25 x 4mm 25 x 6mm 31 x 3mm 31 x 6mm 38 x 3mm 38 x 5mm 38 x 6mm 40 x 4mm 40 x 6mm 50 x 3mm 50 x 4mm 50 x 6mm Weight Part no. each 0.06kg CP205 0.07kg CP210 0.07kg CP216 0.08kg CP220 0.09kg CP230 0.10kg CP235 0.12kg CP240 0.12kg CP245 0.14kg CP250-FU 0.14kg CP241 0.15kg CP251 0.15kg CP255 0.15kg CP256 0.16kg CP260
Conductor fixings
For use with lead covered copper Conductor Weight size each 25 x 3mm 0.02kg Part no. CP305
For use with bare aluminium Conductor size 20 x 3mm 25 x 3mm 25 x 6mm 50 x 6mm Weight each 0.02kg 0.03kg 0.04kg 0.05kg Part no. CP105 CP110 CP120 CP125
For use with pvc covered aluminium Conductor size 25 x 3mm 50 x 6mm Weight each 0.04kg 0.06kg Part no. CP115 CP130
For use with pvc covered copper Conductor size 25 x 3mm 25 x 6mm 50 x 6mm Weight each 0.10kg 0.13kg 0.26kg Part no. CP215 CP225 CP265
Recommended fixing - counter sunk woodscrew 1 1/2 x no.10 and wall plug. Made from high quality copper and aluminium alloys.
Non-metallic DC tape clip
For use with bare tape Conductor size 20 x 3mm 20 x 3mm 25 x 3mm 25 x 3mm 38 x 5mm 50 x 6mm Colour Brown Grey Brown Grey Brown Brown Weight each 0.01kg 0.01kg 0.01kg 0.01kg 0.01kg 0.02kg Part no. CP005 CP010 CP015 CP020 CP060* CP065*
For use with pvc covered tape Conductor size 25 x 3mm 25 x 3mm 25 x 3mm 25 x 3mm 25 x 3mm 25 x 3mm Colour Brown Black Green Grey Stone White Weight each 0.01kg 0.01kg 0.01kg 0.01kg 0.01kg 0.01kg Part no. CP025 CP030 CP035 CP040 CP045 CP050
Non-metallic DC clip - High grade polypropylene, UV stabilised against degradation by sunlight and non-brittle to prevent cold weather damage. Available in six colours to match bare and pvc covered copper and aluminium tapes. This unique design provides easy installation whilst ensuring the tape is gripped firmly and resists high pull off loads. Recommended fixing - counter sunk woodscrew 1 1/2 x no.10 and wall plug. * Not as illustrated.
TSCAT1a
Lightning protection | Flat tape system
www.furse.com
Conductor fixings
For use with bare copper Conductor size 20 x 3mm 25 x 3mm Weight each 0.02kg 0.02kg Part no. CP510 CP515 For use with pvc covered tapes Conductor Weight size each 25 x 3mm 0.02kg Part no. CP517
Tape clip
For use with bare aluminium Conductor size 20 x 3mm 25 x 3mm Weight each 0.01kg 0.05kg Part no. CP405 CP410
Recommended fixing - round head woodscrew 1 1/2 x no.10 and wall plug.
Weldable DC tape clip For use with pvc roofing only
For use with bare tape Conductor Colour size 25 x 3mm Brown 25 x 3mm Grey Weight each 0.03kg 0.03kg Part no. CW015 CW020
For use with pvc covered tape Conductor size 25 x 3mm 25 x 3mm 25 x 3mm 25 x 3mm 25 x 3mm Colour Brown Grey Black Stone White Weight each 0.03kg 0.03kg 0.03kg 0.03kg 0.03kg Part no. CW025 CW040 CW030 CW045 CW050
Universal welding solvent and cleaning solution
Description Weight each 0.57kg Part no.
Universal welding solvent CW905 500ml spray applicator (sufficient for the application of approximately 200 clips) For use with Furse weldable clips only.
Description
Cleaning solution CW999 (Acetone) For cleaning lacquered SARNAFIL roofing membranes and other lacquered materials. 500ml spray applicator.
Weight each 0.62kg
Part no.
Please note: Solvent cannot be supplied outside the UK. For overseas projects, please contact Furse for advice.
TSCAT1a
www.furse.com
Flat tape system | Lightning protection
Adhesive DC tape clip
Conductor fixings
For use on surfaces other than pvc roofing For use with bare tape Conductor Colour size 25 x 3mm Brown 25 x 3mm Grey Weight each 0.03kg 0.03kg Part no. CA015 CA020
For use with pvc covered tape Conductor size 25 x 3mm 25 x 3mm 25 x 3mm 25 x 3mm 25 x 3mm Colour Brown Black Grey Stone White Weight each 0.03kg 0.03kg 0.03kg 0.03kg 0.03kg Part no. CA025 CA030 CA040 CA045 CA050
Surface primer
Accessories for adhesive clips Description Weight each 0.24kg Part no. CA900
Surface primer 250ml spray applicator (sufficient for the application of approximately 500 clips)
Note: Furse strongly recommend the use of the primer when installing the Furse adhesive clip.
Expansion braid bonds and dressing tool
Special flexible expansion braid bonds Type Single length Single length Cross-over Cross-over Material Aluminium Copper Aluminium Copper Length 200mm 200mm 300mm 300mm Cross-sectional area 50mm2 50mm2 50mm2 50mm2 Weight each 0.07kg 0.17kg 0.23kg 0.53kg Part no. BN001 BN101 BN002 BN102
Dressing tool Description Aluminium tool for dressing conductor Weight each 0.31kg Part no. DT100
Glazing bar holdfast
Conductor material Copper Aluminium Maximum glazing bar width 12mm 12mm Weight each 0.11kg 0.05kg Part no. HF705 HF710
Block supplied complete with fixing screw. Enables DC clips etc, to be secured to steel frames, girders, window frames, etc. Conductor clip sold separately.
TSCAT1a
Lightning protection | Flat tape system
www.furse.com
Conductor fixings
For use with bare tape Conductor size 25 x 3mm 25 x 3mm DC Clip colour Brown Grey Weight each 0.06kg 0.06kg Part no. HF015 HF020
Slate holdfast
For use with pvc covered tape Conductor size 25 x 3mm 25 x 3mm 25 x 3mm 25 x 3mm DC Clip colour Brown Black Grey Stone Weight each 0.06kg 0.06kg 0.06kg 0.06kg Part no. HF025 HF030 HF040 HF045
Tail length 500mm.
Back plate holdfast stem
Conductor material Copper Aluminium Weight Part no. each 0.30kg HF320 0.10kg HF325-FU
Recommended fixing - round head woodscrew 1 1/2 x no.10 and wall plug. For use with the appropriate DC clip etc. Supplied with M6 fixing screw.
Test and junction clamps
Conductor size 25 x 3mm 25 x 6mm 31 x 3mm 50 x 6mm 25 x 3mm Conductor material Copper Copper Copper Copper Aluminium Weight Part no. each 0.23kg CT105-FU 0.42kg CT110 0.30kg CT113 0.98kg CT115 0.07kg CT005
Square tape clamp
Recommended fixing - counter sunk woodscrew 1 1/2 x no.10 and wall plug. For forming straight through, cross or tee joints in tape.
Oblong test or junction clamp
Maximum conductor size 26 x 8mm 26 x 8mm Conductor material Copper Aluminium Weight each 0.29kg 0.12kg Part no. CN105 CN005
For straight through tape joints.
TSCAT1a
www.furse.com
Flat tape system | Lightning protection
Plate type test clamp
Test and junction clamps
Maximum conductor size 26 x 12mm Conductor material Copper Weight each 0.62kg Part no. CT405
Recommended fixing - counter sunk woodscrew 1 1/2 x no.10 and wall plug.
Screwdown test clamp
Maximum conductor size 26 x 8mm Conductor material Copper Weight each 0.84kg Part no. CT305
Recommended fixing - countersunk woodscrew 1 1/2 x no.10 and wall plug.
Bimetallic connector
Conductor Weight size each 25 x 3mm aluminium tape to 0.19kg 25 x 3mm copper tape 8mm diameter aluminium 0.19kg conductor to 25 x 3mm copper tape Part no. CN910 CN920
For joining aluminium to copper. Particularly useful where an aluminium lightning protection system needs to be earthed using copper. Recommended fixing - countersunk woodscrew 1 1/2 x no.10 and wall plug.
Oxide inhibiting compound
Plastic bottle each 0.23kg (8oz) Part no. CM005
For all the items in this range we recommend the use of oxide inhibitor when aluminium fittings are installed. Oxide inhibitor is a non-water soluble, naturalpetroleum based polymer grease that seals electrical connections from oxygen and moisture.
TSCAT1a
Lightning protection | Flat tape system
www.furse.com
