Feature e

FEATURE
USA A TI 300MHz z high spee ed processo or USA A BioNano core fingerprint algorith hm of high speed and stability New w generation n fully seale ed, waterpr roof and dustproof fing gerprint sen nsor User r name disp play and hu uman voice prompt Real ltime data t transfer and d WEB onlin ne tracking Stan ndard USB, USB pen drive d and TC CP/IP Iden ntification method: m FP, , ID+FP, ID D+PW, Fingerprint cap pacity: 2000 0 ord capacity y: 50000 Reco Iden ntification speed: <0.5 5 second Size e: 200mm(w w)*140mm(h)*38mm(d)

C Conteni ido
SAFETY PRECAUTIO ONS.................................................... ..................... ..............................................................4 Glossary.. ..................... ............................................................ ..................... ..............................................................5 Illustration for placi ing fingerp print............................... ..................... ..............................................................6 ............................................................ ..................... ..............................................................7 Appearance............... M ............ ............................................................ ..................... ..............................................................9 System Menu UserEnr roll (Finger rprint)............................................... ..................... ............................................................11 UserEnr roll (Psssw word).................................................. ..................... ............................................................12 User Enro oll (Card)... ............................................................ ..................... ............................................................13 User Dele ete................ ............................................................ ..................... ............................................................14 UserVer rify Mode.. ............................................................ ..................... ............................................................15 UserAdm min Setup........................................................... ..................... ............................................................16 User Adm min Clear.... ............................................................ ..................... ............................................................17 Setup Sys stem........... ............................................................ ..................... ............................................................19 SetupSy ystemNe et........................................................ ..................... ............................................................21 Setup -- L Log Setup.................... . ..................... ............................................................22 ........................................ Setup Har rdware Test........................................................ ..................... ............................................................23 USB Flash hRecord Backup............................................ ..................... ............................................................24 USB Flash hUser Ba ackup/Reco overy ............................. ..................... ............................................................25 System In nfo ............... ............................................................ ..................... ............................................................26

SAFETY Y PREC CAUTIONS

Precaut tions
Plea ase read it carefully fir rst of all; Don nt install th he terminal under direct light, humid, dusty or sooty en nvironment t; Don nt install th he terminal near the m magnetic fie eld; Don nt install th he terminal near the ca alefaction device; d Don nt sprinkle the liquid ( (water, drin nk, chemist try) on the t terminal; Alw ways keep th he surface of the term minal clean; Clea ar the term minal by tow wel when there is wate er on the su urface; Don nt break th he terminal; ; Don nt press tw wo keys at the t same tim me; Don nt take dow wn, repair or o change the terminal without au uthorization n; Don nt allow children to to ouch the ter rminal; This s terminal i is only used d for fingerp print verific cation, don't use it for other purposes; If in n doubt, ple ease contac ct the local distributor; ;

Glossary

Administr rator
It is s a special user who has the authorizations of setting g the terminal system m settings a and use er information. e admin can n add or de elete the us sers, and th he admin al lso can cha ange the system settin ngs The of the terminal.

1:1 Identi ification

If it t is 1:1 ide entification mode, the e user has to input the t user ID D firstly, th hen verify t the fing gerprint or enter e the password to make iden ntification. this mode,t the fingerpr rint sensor on the fing gerprint tem mplate will identify wi ith the one of In t the special use er ID.

tification 1:N Ident

Und der 1:N mo ode,the user r need not enter any u user ID. Jus st need place the finge erprint on t the fing gerprint sen nsor . The e terminal w will automa atically iden ntify this fin ngerprint with the one es of all use ers register red in in nside datab base.

nt Enrollm ment Fingerprin

It is s the proce ess to capture the fingerprint im mage featur res got from m the finge erprint sens sor and d save the inside mem mory into the e terminal.

Illustra ation fo or placin ng finge erprint

Correct meth hod:

Straigh hten finger and place it t flatly on the t sensor, and make the fingerp print maxim mally cover the sen nsor.

er in the cen nter of the sensor. Place finge e finger flat tly and smo oothly on th he sensor. Place

Inc correct me ethod:

M Move finger b before the b backlight of se ensor is off.

P Place finger a away from t the center of the t sensor Tilt sensor

T Take off finger r during the process of fi ingerprint verification

Usefinger rtip

Slide fing ger during the e process of fingerp print verificatio on

Appear rance
Front

Back

 stratorBasic cFunctions ForAdminis

System m Menu u
Please pr ress [M] to o enter sys stem man nagement menu und der initial s state.
Sinc ce anyone can enter the t termina al's manage ement men nu under initial state by y pressing [M], e admin shortly after installation n of the we suggest you set the minal. term The e method of registing admin is the same for common c employees. Ple ease refer t to "User Enr rollment" an nd "Admin Setup" S instructions.

e admin to o enter the e system m manageme ent menu. . Verify the

ere are thre ee ways to v verify admin: The 1. F Fingerprint verification n: Let the p person who o is expecte ed to be the admin plac ce his/her finger f on the t sensor to verify. 2. Password v verification: Enter the e admin's ID and pa assword, pres ss [OK] to confirm. Enter the system manage ement men nu after the e admin ver rification is successful. 3. Card C verifica ation: Swip pe the admi ins card to verify.

If the a admin verification is ok, it will en nter the system managem ment menu u.

System m Menu u
Menu list: er: for exam mple: [Enro oll], [Delete], [Verify Mode], M Use [Ad dmin Setu up], [Adm min Clea ar]. Set tup: [Sys stem], [L Log Set tup] and [Hardware Tes st]. [System m] includ des: syst tem time, la anguage, network parame eter, rint fingerpr verifica ation precision, system m voice v volume, do ormancy time and so on. S inc cludes: clo ock [Log Setup] in/out records r storage alarm and finge erprint repeat clock in n/out time period p [Hardw ware Test t] includes: keypad d, LCD, voic ce, fingerp print sensor r, flash test. USB B Flash: Us se the U d disk for communica ations. e: [New R Rec. Backu up], include [All Rec. Backup], Backup] and d [User Rec covery]. [User B Sys stem Info: S Show existi ing users am mount, fingerp prints amount, records amount, fi irmware version. Press [IN/] o or [OUT/] to select a corresponding subme enu and pre ess [OK] to o confirm. u, press [IN N/] or [OU UT/] to se elect differe ent options for setup. Enter submenu After setup, press s [C] turn to save su ubmenu. Pr ress [OK] to t save, or press [C] to cancel, and either r of the operation will r return to th he previous menu.

xit the system manage ement men nu. Press [C] to ex To ensure safety, the system ma anagement t menu will automatica ally return to the defa ault s in a certai in period. menu if no operations

10

UserEnroll ( (Fingerprint)

Enter th he system management menu. Select [Us ser]-[Enroll]. Press [OK] to enter the e enroll menu u. Enter em mployee's ID D and press s [OK] to register r employee. . ss [OUT/] to select t [FP 1] or r [FP 2]. P Press [OK] to start Pres fingerpr rint enrollm ment. Press s [OK] to s save and return to th he enroll menu. Place finger on th he sensor correctly. Please P refe er to <The e way to t>. enroll a fingerprint u need to en nroll one fin ngerprint tw wice. Please e enroll fing gerprints You according to LCD prompt. he second f fingerprint enrolled is different from the first one, or If th the way you place finge er is incorre ect, it will prompt "Please try aga ain". If the fingerpr rint is existe ed, it will p prompt "Fin ngerprint re epeated". Plea ase enroll a another fing gerprint.

n continue to enroll e employees one by on ne. Or pres ss [C] to You can exit.

11

UserEnroll ( (Passwo ord)

Enter [Men nu], select [User] and press [OK] ] to [Enroll] ] interface. Input employee's ID and a press [OK] [ to register emplo oyee. Press [OUT/] to select [Password], and press s [OK] to en nroll. Input passwor rd(1 to 6 nu umbers) and press [OK K] to confirm. Input passwor rd again,and d press [OK K] to confirm m. Press [OK] to save passw word.

ess [C] to exit e to [Enro oll] interfac ce to contin nue, or pres ss [C] to ba ack to Pre defult interfac ce.

12

User Enroll (C Card)

Enter [Men nu], select [User] and press [OK] ] to [Enroll] ] interface. Input employee's ID and a press [OK] [ to register emplo oyee. d press [OK K] to enroll. Press [OUT/] to select [Card], and Swi ipe the emp ployees car rd, and the system will get card number n and d enter save e interface. word. Press [OK] to save passw

to exit to [E Enroll] inter rface to con ntinue, or press [C] to back to Press [C] t defult inter rface. Enroll (Car rd)

13

User D Delete

When emp ployees resign, we nee ed delete th he employee es information in the terminal. Enter th he managem ment menu. Select [Use er]-[Delete] press [OK K]. Enter the employees ID a and press [ [OK], the sy ystem will p prompt ther to dele ete, press [OK] again to t confirm d delete the again whet employee information n. ntinue to de elete other employees after deleting success sfully, or Con press [C] t to back to the t default interface. ease caution n with the a action. All d deleted info ormation inc cluding Notice: Ple employee's s fingerprin nt, password d, attendan nce records can not be e recovered. mistake, ple ease connec ct with the PC and upload the If deleted by m n which has s been back kuped befor re to recove er the employee information n. employee information

14

UserVerify M Mode
Enter the e management menu. Select [Use er]-[Verify Mode] pres ss [OK] to enter th he setting in nterface. UT/] to se elect emplo oyee or pres ss [OK] to i input user I ID. Press [OU Press [OK K] to enter setting inte erface. Set employees verif fy mode through [OUT T/], there e are three modes: [ANY], [P PW+FP] and d [ID+FP]. Then pres ss [OK] to save this se etting.

15

UserAdmin Setup

In the ma anagement interface, select [Use er]-[Admin Setup] pres ss [OK]. Press [O OK] to ente er the admin n user ID and press [O OK] to confirm, the system w will prompt w whether to set user as s admin. Pr ress [OK] to o confirm a and press [C C] to cance el. for the adm min verificat tion before entering th he system It asks f managem ment menu if you set a admin in t the termina al.

16

User A Admin C Clear

In the ma anagement interface, select [Use er]-[Admin Clear] pres ss [OK]. t admin ID I press [O OK] to confirm. Press [OUT/] to select the e admin ID will be show wed on the e LCD press s [OK] to co onfirm. The The e system pr rompt whet ther delete the admin. Press [OK] ] to con nfirm deletio on. Press [C] to ca ancel.

n the admin n delete int terface, pre ess [OK] to enter the u user ID Notice: In interface directly, th hen enter th he ID to delete admin. .

17

 For Admin nistratorAdvanced Functions s

18

Setup System m

In t the manage ement inter rface, select t [Setup]-[System], th hen press [OK K] to enter the sub-me enu.

Dev ID Ter rminals serial number. Time t system tim me, time for rmat displa ays as "YY-M MM-DD H:M M". Set Sele ect [Time], then press s [OK]. Press [OK] to change the e date and t time one by y one. Press [C] to en nter save in nterface and d press [OK K] to confirm.

Lenguaje t language. Set Sele ect [Langua age], then press [OK]. Press [IN/ /] or [OUT T/] to sele ect the lang guage, then n press [OK K]. Press [C] to en nter save in nterface and d press [OK K] to confirm.

Precision t terminal fingerprint c comparison precision. Set 0-[L Low],1-[No ormal], 2-[H High]. Sele ect [Precision], then p press [OK]. Press [IN/] or [OUT T/] to set the precision v value and press p [OK]. nter save in nterface and d press [OK K] to confirm. Press [C] to en

19


Volumen Set t the termin nal voice vo olume. 0-[m mute], 5-[Max]. Sele ect [Volume e], then pre ess [OK]. P Press [IN/ ] or [OUT/ ] to set the volume e value and d press [OK K] to confirm m. Press [C] to en nter save in nterface and d press [OK K] to confirm.

Auto off Set t the time d duration from the last o operation to the dormant stat te. No-[Not Off], 2 Time]. 250-[Max T Sele ect [Auto O Off], then pr ress [OK]. Press [IN/ ] or [OUT/ / ] to set [NO] or a auto off tim me and press [OK] to c confirm. Press [C] to en nter save in nterface and d press [OK K] to confirm.

Auto updat te Aut to update m means the p previous low wer quality fingerprint tem mplate will be b automatically replac ced by the new higher r quality one e during fing gerprint verification. Sele ect [Auto U Update], the en press [O OK]. Press [IN/ ] or [O OUT/ ] to s select [Yes] or [NO] a and press [O OK] to conf firm. Press [C] to en nter save in nterface and d press [OK K] to confirm.

20

Setup SystemNet t

Enter the e system ma anagement t menu, Sel lect [Setup] ]-[System]-[Net]. Press [OK K] to enter the sub-me enu. This function main inc cludes [IP A Address], [S Subnet Mas sk], [MAC A Address] and [Gatew way IP] set ttings. s] or [Subnet Mask] or r [MAC Press [OUT/] to select [IP Address dress] or [G Gateway IP] ]. Add Press [OK] to enter modify interface e. parameters s, and press s [IN/] or r Press [OK] to select the p UT/] or nu umber key to modify [OU Press [C] to en nter save in nterface d return to the [Net] m menu. Press [OK] to confirm and

21

Setup -- Log Setup

In t the manage ement inter rface, select t [Setup]-[Log Setup], then pres ss [OK] to e enter the su ub-menu.

Log Alert e terminal w will alarm w when the me emory capa acity is less s than The the [Log Alert] ] value. o]-Not alarm m, Max. value 5,000. [No Sele ect [Log Ale ert], then p press[OK]. Press [IN/ ] or [OUT/ / ] to set [NO] or inp put the warning re ecords value e and press s [OK] to co onfirm. Press [C] to en nter save in nterface and d press [OK K] to confirm.

ReVerify
Set t a period during which h time the s system only y save the f first suc ccessful reco ords and do o not save the t repeate ed records. o]: Disable the function n; Max. val lue is 250 m min. [No Sele ect [Re-Ver rify], then p press [OK]. Press [IN/ / ] or [OUT T/ ] to set [NO] or en nter the value and pres ss [OK] to confirm. c nter save in nterface and d press [OK K] to confirm. Press [C] to en

22

Setup Hardwa are Tes st

nagement interface, se elect [Setup p]-[Hardwa are Test] an nd press In the man [OK] to tes st Keypad, LCD, Voice, Sensor an nd Flash. Keypad st the keypa ad. Tes Sele ect [Keypad d] and pres ss [OK]. Press any key on the key ypad. If LCD D shows the e same, the e key ypad is good d.

LCD st the LCD. Tes Sele ect [LCD] a and press [O OK]. Press [OK] to start test.

Voice Tes st the terminal voice. Sele ect [Voice] and press [OK]. Ter rminal auto tests 1-17 voices.

Sensor st the senso ors luminan nce. Tes s [OK] . Sele ect [Sensor r] and press The e luminance e value will be changed d according g to the env vironment.

Flash st the terminal flash m memory. Tes Sele ect [Flash] and press [OK] . Not tice: This te est will dele ete all the data d in the f flash memo ory and then check it. Plea ase backup the data before b this o operation.

23

USB FlashR Record B Backup

Con nntected U disk to term minal, press s [M] to ent ter the manageme ent menu, s select [USB B Flash] and d press [OK K].

New Rec B Backup wnload new w T&A recor rds to U pan n drive. Dow Press [OUT/ ] to select [New Rec. Backup], press [OK] to dow wnload the new record ds. Afte er back up process bar shows 100%, press [C] to exit and bac ck to upper menu. New w record file e is BAK.KQ Q located in n G:\000000 001. G is the disk name on PC C of U pen drive. 00000001 is T T&A mac chine seri ial number. .

All Rec Bac ckup Dow wnload all T&A T records s to U pan d drive. Press [OUT/ ] to select [All Rec. Ba ackup], press [OK] to wnload all records. dow Afte er back up process bar shows 100%, press [C] to exit and bac ck to upper menu. The e record file e is BAK.KQ Q located in G:\000000 001. Prompt: if you u backup ne ew records firstly, reco ommend to save w record file e to local pc c. Else it wi ill be replac ced with all new reco ords file.

24

USB FlashU User Bac ckup/Recovery y

UserBackup p
Dow wnload emp ployees rec cords saved d in device t to U pen dr rive. Press [OUT/ ] to select [User Backup], press [OK] to dow wnload the employee information. er backup p process bar r shows 100 0%, press [C] to exit and a back Afte to upp per menu. The e backup file e is BAK.YG G and BAK.Z ZW located in G:\0000 00001.

UserRecove ery
Upload employ yees inform mation save ed in U pen drive to terminal. ere are two ways to re ecover empl loyee inform mation: The 1. C Copy BAK.Y YG and BAK K.ZW to root directory, , then plug U pen driv ve into time e attendanc ce machine and start u user recovery. 2. E Export emp ployee inform mation to U pen drive through U flash management software, s th hen repeat step 1. ecovery all very], press [OK] to re Press [OUT/ ] to select [User Recov ords. reco Afte er recovery y process ba ar shows 10 00%, press [C] to exit t and back to u upper menu u.

25

System m Info
anagement interface, select [Sys stem Info] a and press [OK] to In the ma check the e terminal information.

User gistered use er number. Maximum 2,000 user rs. Reg

FP gistered fing gerprint number. Maxi imum 2,000 0 fingerprin nts. Reg Press [OK] to view the nu umber of us sers who re egistered a ssword. pas

Log e time atten ndance logs s. Maximum m 50,000 re ecords. The

Firm Ver e firmware v version. The

Press [C] back to the managem ment interfa ace.

26