Scribd
Upload
1K views3 pages

Unbrick MTK

The document provides instructions for unbricking an MTK device that has become bricked. It describes identifying the test point to activate the device's meta-mode to allow downloading the factory firmware. Key steps include installing MTK drivers, finding the device's factory firmware, activating meta-mode by shorting the test point, and using flash tool software to download the firmware and unbrick the device.

Uploaded by

giokspy
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views3 pages

Unbrick MTK

The document provides instructions for unbricking an MTK device that has become bricked. It describes identifying the test point to activate the device's meta-mode to allow downloading the factory firmware. Key steps include installing MTK drivers, finding the device's factory firmware, activating meta-mode by shorting the test point, and using flash tool software to download the firmware and unbrick the device.

Uploaded by

giokspy
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Ho' to u"(rick your MTK Device START Brick MTK Device ? !

"stall MTK driver # $orrect S% Flash Tool Do You Have Your MTK Device Factory R M ? No Google it Does Your MTK Device have Meta-Mode ? No !de"ti&y Test%oi"t Short Test%oi"t # Do'"load Factory R M Activate Meta-Mode # Do'"load Factory R M Yes Yes

Your MTK device u"(rick )

Glossary
What is brick MTK device brick symptom : Cannot power on, no charging icon when charging, cannot boot to recovery or bootloader, no PreLoader !" #C$M detection at %evice Manager PreLoader !" #C$M & Witho't battery then pl'gin yo'r MTK device !" to the PC will activate it( $nly d'ring these )ew seconds, *actory +$M, )irmware is permitted to be downloaded( *actory +$M & -o'r MTK device )irmware( Can be downloaded )rom yo'r man')act'rer web site i) yo' bo'ght branded devices s'ch as Lenovo, .T/, .opo 0 etc( Can also be back'p with MTK %roid Tools( 1) yo' didn2t do a back'p or yo' can2t )ind yo'r device man')act'rer web site then 'se google 0 search )or yo'r MTK device )or'm, be it in Chinese or +'ssian, 'se google translate 0 ask the 'sers there to back'p the *actory +$M )or yo' to 'nbrick yo'rs( MTK Meta3Mode & Combination o) hardware key to activate MediaTek !" #C$M )or downloading *actory +$M when PreLoader is missing or not responding to normal download( Typical Meta3Mode combinations key 4( Witho't battery, hold #ol'me3 p, don2t let go then pl'gin !" cable to PC 5( Witho't battery, hold #ol'me3%own, don2t let go then pl'gin !" cable to PC 6( Witho't battery, hold both #ol'me3 p 0 %own, don2t let go then pl'gin !" cable to PC TestPoint MTK TestPoint & !hort TestPoint typical label as KC$L7 at PC" to any metal part which is typically G8% will activate Meta3Mode )or downloading *actory +$M, )irmware( !ome MTK device has the Testpoint 'nder the PC" so yo' will have to dismantle whole PC" to be able to access it( 9 re)erence dismantling video here( !P*T & MTK !mart Phone *lash Tool )or downloading *actory +$M, )irmware( The latest version doesn2t necessary will work so again, google it, some older MTK devices re:'ire older version )or s'ccess)'ll downloading )or 'nbricking(

nbricking Tips
$riginal +'ssian thread here 'se google translate 0 ;da 'nbrick thread here 0 make s're yo' read every page, many good 'sers response 0 tips( +ead it again 0 again, even i with electronics backgro'nd don2t learn it in a day or two < 9 re)erence nbrick video by )ellow ;da )riend rnovino 0 take note partic'larly at 47:7= )or the !" Connect so'nd when the correct TestPoint has been identi)y as not all is labeled as KC$L7 at the PC"( 9s per advice by r'a4, it is advisable to 'se 100 to 1000 ohms resistor as yo' wo'ldn2t want to short the !" = #olt directly to G8% while identi)ying the TestPoint < Typical proced're )or 'nbricking as below : Meta3Mode Click at !P*T 3> *irmware3> pgrade 3> ?old ?ardware key combination@Meta3ModeA, don2t let go 3> Pl'gin yo'r MTK device to the PC TestPoint With yo'r MTK device already pl'gin to the PC witho't battery, at !P*T 3> click at *irmware3> pgrade then short TestPoint to any metal part on yo'r MTK device( 1) yo'r device is boot loop, hal)3brick then the proced're is di))erent( !ome MTK devices re:'ire battery while some doesn2t 0 i) downloading )ail then try vice3versa( Typically yo' only need to download only the system(img( With battery -o'r MTK device with the battery already pl'gin to the PC, at !P*T 3> click at %ownload then take o't battery then p't it back( Witho't battery -o'r MTK device witho't battery 0 !" not connected to PC, at !P*T 3> click at %ownload 3> now only pl'gin !" to PC( 1) it doesn2t work then try other combination b't make s're yo' have already install the MTK driver(
3

You might also like