Scribd
Upload
345 views2 pages

887 - Pds-Sitala Oil D 201.03

Shell Sitala D 201.03 is a water extendible metalworking fluid recommended for light to medium duty machining operations on ferrous metals and aluminum. It is chlorine, hexahydrotriazine and secondary amine free. The product should be stored inside for up to one year to avoid freezing and provide good foaming behavior, odorlessness, biostability, corrosion protection, and detergency for cleaning machine tools. Recommended concentrations vary depending on the operation and water hardness, typically between 5-12%

Uploaded by

Andrea Antenucci
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
345 views2 pages

887 - Pds-Sitala Oil D 201.03

Shell Sitala D 201.03 is a water extendible metalworking fluid recommended for light to medium duty machining operations on ferrous metals and aluminum. It is chlorine, hexahydrotriazine and secondary amine free. The product should be stored inside for up to one year to avoid freezing and provide good foaming behavior, odorlessness, biostability, corrosion protection, and detergency for cleaning machine tools. Recommended concentrations vary depending on the operation and water hardness, typically between 5-12%

Uploaded by

Andrea Antenucci
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Technical Data Sheet

Shell Sitala D 201.03


Water extendible metalworking fluid
Shell Sitala D 201.03 is a high quality metalworking fluid recommended for light to medium duty operations on ferrous metals and aluminum. It is free of chlorine, hexahydrotriazine and secondary amines. Applications
Shell Sitala D 201.03 is an excellent, problem free, general purpose product to be recommended (over a broad water hardness range) for all type of light to medium duty operations (including grinding) on cast iron, steel, and aluminum alloys.

Storage
The product should be stored inside (41-104F) for no more than one year. Freezing should be avoided.

Health & Safety


Please note that mixed coolants work over long periods of time, therefore chemical contamination (hydraulic oils, greases, metal solutions, paints, rust inhibitors, etc.) or bacterial contamination (from dirty hands, work pieces, industrial grade water, sundry waste, etc.) can often occur. Contamination with the above is materials should be minimized/eliminated. Regular monitoring of the in-use product recommended to maintain optimum product condition and for determination of its useful working life.

Performance Features and Benefits


Good foaming behaviour Odorless Good biostability - encouraging longer service life Good corrosion protection Good detergency offering low drag out, clean parts and machine tools, and a better working environment Operator friendly

Recommended Concentrations
The concentration varies depending on the type of machining operation, the water hardness, and the required corrosion protection. The typical recommended concentrations for use in medium water hardness are: General machining Grinding Severe cutting operations :57% :45% : 8 12 %

Protect the environment


Waste must be disposed of in accordance with EC Directive 91/156, 91/689 and 94/62 or in line with local legislation.

Shell Lubricants

Page 1 of 2

03/07/2007

Technical Data Sheet

Typical Physical Characteristics


Unit
Product Codes

Method

Shell Sitala D 201.03


Drum Pail 5072694 5073350

Mineral Oil content % 35 Kinematic Viscosity @ 20C mm/s ASTM D 445 200 - 300 Density @ 20C g/mL ASTM D 1298 0.97 pH of the emulsion at 5% DIN 51369 9.3 Min Anti-Cor. Protection Limit (0-0) % DIN 51360/2 4.0 Refractometer Factor 1.2 Acid Split Factor 1.5 These characteristics are typical of current production. While future production will conform to Shell's specification, variations in these characteristics may occur.

Page 2 of 2

You might also like